Resources
Two autonomous rovers, Rover A and Rover B, move along identical parallel tracks along the -axis. Rover A maintains a constant forward velocity of starting from at . Rover B starts ahead at and moves in the same direction at a lower constant velocity . Determine the critical threshold velocity for Rover B such that Rover A overtakes Rover B exactly at the boundary of a operational corridor (). State whether Rover A can overtake Rover B within the corridor if .
Answer and steps
Final answer
; if , Rover A cannot overtake Rover B within the corridor.
Steps
Write the equations of motion for both rovers
Both rovers travel along the positive -axis at constant speeds. Using the uniform motion formula :
- For Rover A:
- For Rover B:
Determine the time Rover A reaches the boundary
Rover A reaches the boundary of the operational corridor at . We set to find the arrival time :
Calculate the critical velocity
For Rover A to overtake Rover B exactly at the corridor boundary, both rovers must occupy the same position at time :
Subtract (the displacement covered by Rover B):
Solve for :
Analyze the condition when
The relative position between Rover B and Rover A at any time is:
- The time of overtaking occurs when , giving .
- If , Rover B travels faster, so the relative closing speed decreases. Consequently, , which means the overtake position satisfies .
Therefore, if , Rover A cannot overtake Rover B within the corridor.
Typical errors
01 The student ignores Rover B's initial position offset and uses the total corridor distance of 600 m to calculate Rover B's velocity, yielding an incorrect critical speed of 4.50 m/s.
Sample Student Work
Reviewed by ACEpath TeacherStep-by-Step Review
Walk Through It with Your Teacher- Step 1
- Step 2Correct
You used the final position as Rover B's travel distance, but Rover B started with a head start at , meaning Rover B only traveled a displacement of .
- Step 3Correct
Your qualitative reasoning that Rover A cannot overtake Rover B if Rover B exceeds the critical threshold is correct, but your statement inherited the incorrect numerical threshold from the previous step.
WHAT YOU DID WELL
Compliments from Your TeacherYou correctly calculated the time elapsed before Rover A arrives at the corridor boundary.
You understood the qualitative condition that moving faster than the critical speed prevents an overtake within the boundary.
THE ERROR
Where Your ACEpath Teacher Spotted the Mistakeno
WHY IT HAPPENED
ACEpath Teacher's DiagnosisYou conflated coordinate position with displacement , assuming that Rover B traversed the entire corridor rather than accounting for its initial position at .
REASONING PATH
Your ACEpath teacher’s suggested approach- Displacement vs. Position
Average velocity is displacement over time: , not .
Always write out before dividing by time whenever an object starts at a non-zero coordinate.
CORRECTED PATH
ACEpath Teacher's DemonstrationFind Rover B's displacement: .
Calculate the critical velocity: .
; Rover A cannot overtake Rover B within the corridor if .
02 The student calculates the critical velocity correctly but mistakenly concludes that a higher velocity for Rover B allows Rover A to overtake sooner within the corridor.
Sample Student Work
Reviewed by ACEpath TeacherStep-by-Step Review
Walk Through It with Your Teacher- Step 1
- Step 2
- Step 3Correct
When Rover B travels faster (), the closing relative speed decreases. This means Rover A requires more time and greater distance to close the initial gap, so overtaking occurs past the mark.
WHAT YOU DID WELL
Compliments from Your TeacherYou correctly computed the total time Rover A takes to reach the corridor limit.
You accurately determined Rover B's required displacement and corresponding critical velocity .
THE ERROR
Where Your ACEpath Teacher Spotted the Mistakeno
WHY IT HAPPENED
ACEpath Teacher's DiagnosisYou treated an increase in Rover B's speed as facilitating the overtaking process rather than considering how it reduces the relative closing velocity between the two rovers.
REASONING PATH
Your ACEpath teacher’s suggested approach- Relative Velocity in Overtaking
The time to close a leading gap is , which depends inversely on the relative speed .
Always check how changing the target's speed affects the gap closure rate: if the target moves faster, the relative closing speed decreases, increasing both the overtake time and overtake position.
CORRECTED PATH
ACEpath Teacher's DemonstrationWrite the condition for the overtake position: .
Observe that when , the denominator decreases, which makes .
Calculate the resulting position: .
; Rover A cannot overtake Rover B within the corridor if .
03 The student calculates the time using Rover B's initial position instead of the corridor length, finding t = 150 / 4.50 = 33.33 s and leading to an incorrect velocity.
Sample Student Work
Reviewed by ACEpath TeacherStep-by-Step Review
Walk Through It with Your Teacher- Step 1Correct
You calculated the time it takes Rover A to reach Rover B's starting location (). To find the critical velocity where overtaking occurs at the corridor boundary, Rover A must reach from , which requires .
- Step 2Correct
Your formula for Rover B's required velocity is conceptually sound, but substituting the incorrect time of propagated the error to yield instead of .
- Step 3Correct
Your qualitative reasoning is completely correct: if Rover B travels faster than the critical velocity, the overtake point shifts beyond the boundary. However, the numerical threshold reflects the earlier calculation error.
WHAT YOU DID WELL
Compliments from Your TeacherYou correctly calculated the net displacement required for Rover B: .
You correctly related Rover B's velocity to displacement and time using .
You correctly deduced that a velocity higher than critical prevents Rover A from overtaking within the corridor.
THE ERROR
Where Your ACEpath Teacher Spotted the MistakeNo
WHY IT HAPPENED
ACEpath Teacher's DiagnosisYou confused the initial position of Rover B () with the event boundary () when determining the available time for Rover A. The elapsed time until overtaking at the boundary is governed by Rover A moving all the way from to .
REASONING PATH
Your ACEpath teacher’s suggested approach- Identify the Event Location
The total transit time is determined by the vehicle whose motion is fully known reaching the specified meeting coordinate : .
Always identify the target coordinate where the meeting occurs () and divide the full distance covered by Rover A () by its speed.
CORRECTED PATH
ACEpath Teacher's DemonstrationCalculate the total transit time for Rover A to reach the boundary: .
Determine the displacement of Rover B over this duration: .
Divide Rover B's displacement by the transit time: .
Conclude the qualitative check: if , Rover A cannot overtake Rover B within the corridor.
; if , Rover A cannot overtake Rover B within the corridor.
Lock it in
What is the difference between position and displacement in kinematic equations?
Position is a coordinate relative to the origin, whereas displacement is the net change in position: .
Similar question
Car 1 starts at moving at . Car 2 starts at moving in the same direction at constant velocity . If Car 1 catches Car 2 at , find .
Answer
. Car 1 takes . Car 2 travels . Thus, .
Drone A flies from at . Drone B starts at at and flies forward at a constant speed . Determine the maximum speed Drone B can have if Drone A must overtake Drone B before or at a safety boundary located at .
Answer
. Drone A reaches at . In that time, Drone B's displacement must be at most . Therefore, .
Sprinter A starts from with speed . Sprinter B starts ahead at with constant speed . If Sprinter A overtakes Sprinter B exactly at the finish line at , find . If Sprinter B runs at , does Sprinter A overtake Sprinter B before the finish line?
Answer
; No overtake before the finish line if . The race duration is . Sprinter B covers , yielding . Since , Sprinter B finishes ahead, so Sprinter A cannot overtake Sprinter B within the race.