Resources

An audio engineer analyzes an unknown pipe organ tone played in an auditorium where the speed of sound is 344 m/s344\text{ m/s}. The standing sound wave in air creates successive displacement nodes separated by a distance of 0.430 m0.430\text{ m}. Determine the wavelength of the sound wave, its fundamental vibration frequency, and identify whether the resulting pitch lies closer to G4\text{G}_4 (392 Hz392\text{ Hz}) or A4\text{A}_4 (440 Hz440\text{ Hz}).

Answer and steps

Final answer

λ=0.860 m\lambda = 0.860\text{ m}, f=400 Hzf = 400\text{ Hz}, the pitch lies closer to G4\text{G}_4 (392 Hz392\text{ Hz})

Steps

01

Determine the Wavelength

In any standing wave, the distance between two consecutive displacement nodes (or two consecutive antinodes) corresponds to half of a full wavelength:

d=λ2d = \frac{\lambda}{2}

Given that the distance between successive nodes is d=0.430 md = 0.430\text{ m}:

λ=2d=2⋅0.430 m=0.860 m\lambda = 2d = 2 \cdot 0.430\text{ m} = 0.860\text{ m}

Common Pitfall: A common mistake is equating the distance between adjacent nodes directly to one full wavelength. A complete wave cycle includes two consecutive node-to-node loops (one positive lobe and one negative lobe), which makes λ=2d\lambda = 2d.


02

Calculate the Frequency

The relationship between wave speed vv, frequency ff, and wavelength λ\lambda is given by the wave equation:

v=fλ  ⟹  f=vλv = f \lambda \implies f = \frac{v}{\lambda}

Substitute the given speed of sound (v=344 m/sv = 344\text{ m/s}) and the calculated wavelength (λ=0.860 m\lambda = 0.860\text{ m}):

f=344 m/s0.860 m=400 Hzf = \frac{344\text{ m/s}}{0.860\text{ m}} = 400\text{ Hz}


03

Compare with Reference Musical Pitches

Pitch is the perceptual correlate of the wave's fundamental frequency. To determine which musical note the tone is closer to, compare the frequency difference:

  • Difference from G4\text{G}_4 (392 Hz392\text{ Hz}): ∣400 Hz−392 Hz∣=8 Hz|400\text{ Hz} - 392\text{ Hz}| = 8\text{ Hz}
  • Difference from A4\text{A}_4 (440 Hz440\text{ Hz}): ∣440 Hz−400 Hz∣=40 Hz|440\text{ Hz} - 400\text{ Hz}| = 40\text{ Hz}

Because 8 Hz<40 Hz8\text{ Hz} < 40\text{ Hz}, the sound's frequency lies significantly closer to G4\text{G}_4 (392 Hz392\text{ Hz}).

Typical errors

OverviewACEpath Teacher's Diagnosis

01 The student equates the distance between successive nodes directly to the full wavelength instead of half a wavelength.

Sample Student Work

Reviewed by ACEpath Teacher
Step-by-Step Review
Walk Through It with Your Teacher
Incorrect
  1. Step 1

    Distance between nodes=λ  ⟹  λ=0.430 m\text{Distance between nodes} = \lambda \implies \lambda = 0.430\text{ m}

    Correct

    λ2=0.430 m  ⟹  λ=2×0.430 m=0.860 m\frac{\lambda}{2} = 0.430\text{ m} \implies \lambda = 2 \times 0.430\text{ m} = 0.860\text{ m}

    In a standing wave, the distance between two successive displacement nodes corresponds to half a wavelength (λ2\frac{\lambda}{2}), not a full wavelength.

  2. Step 2

    f=vλ=3440.430  ⟹  f=800 Hzf = \frac{v}{\lambda} = \frac{344}{0.430} \implies f = 800\text{ Hz}

    Correct

    f=vλ=344 m/s0.860 m=400 Hzf = \frac{v}{\lambda} = \frac{344\text{ m/s}}{0.860\text{ m}} = 400\text{ Hz}

    You used the correct relation f=vλf = \frac{v}{\lambda}, but your calculated frequency inherited the halved wavelength from Step 1.

  3. Step 3

    ∣800−392∣=408 Hz  ⟹  ∣800−440∣=360 Hz  ⟹  Closer to A4|800 - 392| = 408\text{ Hz} \implies |800 - 440| = 360\text{ Hz} \implies \text{Closer to A4}

    Correct

    ∣400 Hz−392 Hz∣=8 Hz<∣440 Hz−400 Hz∣=40 Hz  ⟹  Closer to G4|400\text{ Hz} - 392\text{ Hz}| = 8\text{ Hz} < |440\text{ Hz} - 400\text{ Hz}| = 40\text{ Hz} \implies \text{Closer to }\text{G}_4

    Your comparison logic was executed properly, but comparing the true frequency of 400 Hz400\text{ Hz} shows that it is closer to G4\text{G}_4 (392 Hz392\text{ Hz}) than to A4\text{A}_4 (440 Hz440\text{ Hz}).

WHAT YOU DID WELL
Compliments from Your Teacher

You used the fundamental wave relationship f=vλf = \frac{v}{\lambda} correctly.

You evaluated absolute frequency differences to determine the closest musical pitch.

THE ERROR
Where Your ACEpath Teacher Spotted the Mistake
Node spacing equated to full wavelength

no

WHY IT HAPPENED
ACEpath Teacher's Diagnosis

You treated the separation between two adjacent standing wave nodes as a full wave cycle rather than half of a cycle (d=λ2d = \frac{\lambda}{2}).

REASONING PATH
Your ACEpath teacher’s suggested approach
Node-to-Node Distance in Standing Waves
  • Consecutive displacement nodes (or antinodes) are separated by λ2\frac{\lambda}{2}, meaning λ=2d\lambda = 2d.

  • Always multiply the distance between two consecutive nodes by 22 before solving for frequency or speed.

CORRECTED PATH
ACEpath Teacher's Demonstration
  1. Set the distance between successive nodes equal to half a wavelength: λ2=0.430 m  ⟹  λ=0.860 m\frac{\lambda}{2} = 0.430\text{ m} \implies \lambda = 0.860\text{ m}.

  2. Calculate the fundamental frequency using v=344 m/sv = 344\text{ m/s}: f=344 m/s0.860 m=400 Hzf = \frac{344\text{ m/s}}{0.860\text{ m}} = 400\text{ Hz}.

  3. Compare differences: ∣400 Hz−392 Hz∣=8 Hz|400\text{ Hz} - 392\text{ Hz}| = 8\text{ Hz} versus ∣440 Hz−400 Hz∣=40 Hz|440\text{ Hz} - 400\text{ Hz}| = 40\text{ Hz}.

Final answer

λ=0.860 m\lambda = 0.860\text{ m}, f=400 Hzf = 400\text{ Hz}, closer to G4\text{G}_4

NEXT STEPS
Final Takeaways from Your Teacher
  • Sketch a standing wave loop showing node-antinode-node to visually reinforce that one loop equals λ2\frac{\lambda}{2}.

  • Practice calculating wavelength from node-to-node versus node-to-antinode measurements.

OverviewACEpath Teacher's Diagnosis

02 The student multiplies the wave speed by the wavelength instead of dividing when computing frequency.

Sample Student Work

Reviewed by ACEpath Teacher
Step-by-Step Review
Walk Through It with Your Teacher
Partially correct
  1. Step 1

    λ/2=0.430 m  ⟹  λ=0.860 m\lambda / 2 = 0.430\text{ m} \implies \lambda = 0.860\text{ m}

  2. Step 2

    f=v×λ  ⟹  f=344×0.860=295.84 Hzf = v \times \lambda \implies f = 344 \times 0.860 = 295.84\text{ Hz}

    Correct

    f=vλ=344 m/s0.860 m=400 Hzf = \frac{v}{\lambda} = \frac{344\text{ m/s}}{0.860\text{ m}} = 400\text{ Hz}

    You inverted the wave speed formula by writing f=v×λf = v \times \lambda. Starting from the fundamental wave equation v=fλv = f\lambda, dividing both sides by λ\lambda gives f=vλf = \frac{v}{\lambda}.

  3. Step 3

    ∣295.84−392∣=96.16 Hz|295.84 - 392| = 96.16\text{ Hz}, ∣295.84−440∣=144.16 Hz  ⟹  Closer to G4|295.84 - 440| = 144.16\text{ Hz} \implies \text{Closer to G4}

    Correct

    ∣400 Hz−392 Hz∣=8 Hz|400\text{ Hz} - 392\text{ Hz}| = 8\text{ Hz}, ∣440 Hz−400 Hz∣=40 Hz  ⟹  Closer to G4|440\text{ Hz} - 400\text{ Hz}| = 40\text{ Hz} \implies \text{Closer to }\text{G}_4

    Your comparison method was conceptually sound, but the numerical differences were affected by the incorrect frequency from the previous step. Evaluating with the true frequency of 400 Hz400\text{ Hz} confirms that the pitch is closer to G4\text{G}_4 (392 Hz392\text{ Hz}) by an 8 Hz8\text{ Hz} difference.

WHAT YOU DID WELL
Compliments from Your Teacher

You correctly used the property that consecutive displacement nodes are separated by half a wavelength.

You accurately solved for the full wavelength λ=0.860 m\lambda = 0.860\text{ m}.

You properly evaluated absolute frequency differences to determine which reference pitch was closer.

THE ERROR
Where Your ACEpath Teacher Spotted the Mistake
Wave equation rearrangement error

no

WHY IT HAPPENED
ACEpath Teacher's Diagnosis

You rearranged the wave relation v=fλv = f\lambda incorrectly as f=vλf = v\lambda instead of isolating ff by dividing wave speed by wavelength (f=v/λf = v / \lambda).

REASONING PATH
Your ACEpath teacher’s suggested approach
Isolate frequency algebraically
  • v=fλ  ⟹  f=vλv = f\lambda \implies f = \frac{v}{\lambda}

  • Check dimensions before multiplying: speed (m/s\text{m/s}) divided by wavelength (m\text{m}) yields frequency (1/s=Hz1/\text{s} = \text{Hz}), whereas multiplying them gives m2/s\text{m}^2/\text{s}.

CORRECTED PATH
ACEpath Teacher's Demonstration
  1. State the standard wave equation: v=fλv = f\lambda.

  2. Divide both sides by λ\lambda to isolate frequency: f=vλf = \frac{v}{\lambda}.

  3. Substitute the values: f=344 m/s0.860 m=400 Hzf = \frac{344\text{ m/s}}{0.860\text{ m}} = 400\text{ Hz}.

  4. Compare differences: ∣400 Hz−392 Hz∣=8 Hz|400\text{ Hz} - 392\text{ Hz}| = 8\text{ Hz} versus ∣400 Hz−440 Hz∣=40 Hz|400\text{ Hz} - 440\text{ Hz}| = 40\text{ Hz}.

Final answer

λ=0.860 m\lambda = 0.860\text{ m}, f=400 Hzf = 400\text{ Hz}, the pitch lies closer to G4\text{G}_4 (392 Hz392\text{ Hz})

NEXT STEPS
Final Takeaways from Your Teacher
  • Always write out the base formula v=fλv = f\lambda before isolating the unknown variable.

  • Perform a quick dimensional analysis check to ensure the units simplify to s−1\text{s}^{-1} (Hz\text{Hz}).

OverviewACEpath Teacher's Diagnosis

03 The student miscalculates the distance between nodes as a quarter wavelength instead of half a wavelength.

Sample Student Work

Reviewed by ACEpath Teacher
Step-by-Step Review
Walk Through It with Your Teacher
Incorrect
  1. Step 1

    λ4=0.430 m  ⟹  λ=4×0.430=1.72 m\frac{\lambda}{4} = 0.430\text{ m} \implies \lambda = 4 \times 0.430 = 1.72\text{ m}

    Correct

    d=λ2=0.430 m  ⟹  λ=2×0.430=0.860 md = \frac{\lambda}{2} = 0.430\text{ m} \implies \lambda = 2 \times 0.430 = 0.860\text{ m}

    In a standing wave, the distance between two consecutive displacement nodes is half of a full wavelength (λ2\frac{\lambda}{2}), not a quarter wavelength. A quarter wavelength is the distance between an adjacent node and antinode.

  2. Step 2

    f=vλ=3441.72  ⟹  f=200 Hzf = \frac{v}{\lambda} = \frac{344}{1.72} \implies f = 200\text{ Hz}

    Correct

    f=vλ=344 m/s0.860 m=400 Hzf = \frac{v}{\lambda} = \frac{344\text{ m/s}}{0.860\text{ m}} = 400\text{ Hz}

    You used the correct relationship f=vλf = \frac{v}{\lambda}, but your result was halved because of the doubled wavelength from Step 1.

  3. Step 3

    ∣200−392∣=192 Hz|200 - 392| = 192\text{ Hz}, ∣200−440∣=240 Hz  ⟹  closer to G4|200 - 440| = 240\text{ Hz} \implies \text{closer to G4}

    Correct

    ∣400−392∣=8 Hz|400 - 392| = 8\text{ Hz}, ∣400−440∣=40 Hz  ⟹  closer to G4|400 - 440| = 40\text{ Hz} \implies \text{closer to } \text{G}_4

    Your comparison method of taking absolute differences was completely sound, and coincidentally resulted in the same final note choice despite the incorrect frequency.

WHAT YOU DID WELL
Compliments from Your Teacher

You correctly used the wave speed relation f=vλf = \frac{v}{\lambda}.

You used absolute frequency differences to determine which reference pitch was closer.

THE ERROR
Where Your ACEpath Teacher Spotted the Mistake
Node-to-node spacing misidentified as quarter wavelength

You treated adjacent nodes as being separated by λ4\frac{\lambda}{4} rather than λ2\frac{\lambda}{2}.

WHY IT HAPPENED
ACEpath Teacher's Diagnosis

Confusing the distance between consecutive nodes (half a cycle, λ2\frac{\lambda}{2}) with the distance between an adjacent node and antinode (quarter cycle, λ4\frac{\lambda}{4}).

REASONING PATH
Your ACEpath teacher’s suggested approach
Standing Wave Landmark Distances
  • Node-to-node =λ2= \frac{\lambda}{2}, antinode-to-antinode =λ2= \frac{\lambda}{2}, and node-to-adjacent-antinode =λ4= \frac{\lambda}{4}.

  • Always sketch one complete sinusoidal wave cycle containing two loops (positive and negative lobes) to see that two consecutive nodes bound a single loop of length λ2\frac{\lambda}{2}.

CORRECTED PATH
ACEpath Teacher's Demonstration
  1. Relate the node-to-node distance to wavelength: d=λ2=0.430 m  ⟹  λ=0.860 md = \frac{\lambda}{2} = 0.430\text{ m} \implies \lambda = 0.860\text{ m}.

  2. Calculate frequency: f=vλ=344 m/s0.860 m=400 Hzf = \frac{v}{\lambda} = \frac{344\text{ m/s}}{0.860\text{ m}} = 400\text{ Hz}.

  3. Compare with reference pitches: ∣400 Hz−392 Hz∣=8 Hz|400\text{ Hz} - 392\text{ Hz}| = 8\text{ Hz} and ∣400 Hz−440 Hz∣=40 Hz|400\text{ Hz} - 440\text{ Hz}| = 40\text{ Hz}.

Final answer

λ=0.860 m\lambda = 0.860\text{ m}, f=400 Hzf = 400\text{ Hz}, and the tone is closer to G4\text{G}_4 (392 Hz392\text{ Hz}).

NEXT STEPS
Final Takeaways from Your Teacher
  • Review the spatial profile of standing waves and memorize the key geometric relationships between nodes and antinodes.

  • Practice calculating fundamental and harmonic frequencies from spatial standing wave patterns.

Lock it in

Similar question

01

A tuning fork produces a standing sound wave in air (v=340 m/sv = 340\text{ m/s}) with adjacent displacement nodes separated by 0.680 m0.680\text{ m}. Calculate the wavelength and frequency of the sound.

Answer

λ=2(0.680 m)=1.36 m\lambda = 2(0.680\text{ m}) = 1.36\text{ m}; f=vλ=340 m/s1.36 m=250 Hzf = \frac{v}{\lambda} = \frac{340\text{ m/s}}{1.36\text{ m}} = 250\text{ Hz}.

02

In a resonant tube open at both ends, the speed of sound is 344 m/s344\text{ m/s}. Adjacent displacement antinodes are measured to be 0.215 m0.215\text{ m} apart. Find the frequency of this tone and determine whether it is closer to G5\text{G}_5 (784 Hz784\text{ Hz}) or A5\text{A}_5 (880 Hz880\text{ Hz}).

Answer

λ=2(0.215 m)=0.430 m\lambda = 2(0.215\text{ m}) = 0.430\text{ m}; f=3440.430=800 Hzf = \frac{344}{0.430} = 800\text{ Hz}. ∣800−784∣=16 Hz|800 - 784| = 16\text{ Hz} while ∣880−800∣=80 Hz|880 - 800| = 80\text{ Hz}, so it is closer to G5\text{G}_5 (784 Hz784\text{ Hz}).

03

An organ pipe produces a standing wave with displacement nodes spaced 0.515 m0.515\text{ m} apart in air at 340 m/s340\text{ m/s}. If the speed of sound increases to 350 m/s350\text{ m/s} due to warmer air while the pipe geometry fixes the node spacing, calculate the new frequency and state whether the pitch sharpens (increases) or flattens (decreases).

Answer

λ=2(0.515 m)=1.03 m\lambda = 2(0.515\text{ m}) = 1.03\text{ m}. The new frequency is fnew=350 m/s1.03 m≈339.8 Hzf_{\text{new}} = \frac{350\text{ m/s}}{1.03\text{ m}} \approx 339.8\text{ Hz} (up from fold=3401.03≈330.1 Hzf_{\text{old}} = \frac{340}{1.03} \approx 330.1\text{ Hz}). The pitch sharpens (increases).

Loading workspace…