Resources
A stationary acoustic horn emits a sound wave with a frequency of into air where the speed of sound is . An observer travels directly toward the stationary horn at a speed of . In the reference frame of the moving observer, determine (a) the perceived speed of the approaching wavefronts , (b) the physical spacing between successive wavefronts (wavelength ), and (c) the detected pitch frequency .
Answer and steps
Final answer
(a) ; (b) ; (c)
Steps
Part (a): Perceived Speed of Wavefronts
Sound propagates through the stationary air at speed toward the observer. Because the observer moves directly toward the oncoming sound waves at speed , the relative speed of the wavefronts in the observer's frame of reference is the sum of the two speeds:
Substitute the given values:
Part (b): Physical Spacing Between Successive Wavefronts (Wavelength)
The horn (sound source) is stationary relative to the air. As a result, the wavefronts are emitted into the medium with the standard rest wavelength:
Substitute the values:
Common Pitfall: A moving observer intercepts wavefronts more frequently, but does not compress the physical spacing between them. Spatial compression only occurs if the source moves through the medium. In classical mechanics, length is invariant across inertial reference frames, meaning the distance between consecutive crests measured by the observer is identical to that in the medium:
Part (c): Detected Pitch Frequency
The observer detects wavefronts passing by at relative speed with a spacing of . The observed frequency is given by the wave relation:
Alternatively, using the Doppler shift formula for a moving observer and a stationary source:
Substitute the numerical values:
Typical errors
01 The student believes that moving toward the source compresses the wavelength in space, dividing the perceived speed by the original frequency instead of recognizing that the stationary source fixes the spatial wavelength.
Sample Student Work
Reviewed by ACEpath TeacherStep-by-Step Review
Walk Through It with Your Teacher- Step 1
- Step 2Correct
Because the sound source is stationary relative to the air, the physical distance between crests is fixed in the medium at . A moving observer encounters these waves at a different rate, but moving does not stretch or compress the spatial separation between crests.
- Step 3Correct
You correctly used the relationship , but substituting your altered wavelength mathematically cancelled out the relative speed and caused the Doppler shift to disappear entirely.
WHAT YOU DID WELL
Compliments from Your TeacherYou correctly calculated the relative speed of the wavefronts in the observer's frame of reference.
You correctly applied the fundamental wave relationship between speed, wavelength, and frequency.
THE ERROR
Where Your ACEpath Teacher Spotted the Mistakeno
WHY IT HAPPENED
ACEpath Teacher's DiagnosisYou assumed that the observer's relative speed alters the spatial wavelength in air. In classical wave mechanics, physical wavelength is established solely by the source's motion through the medium; an observer moving through a uniform medium simply intercepts stationary wavefronts at a higher frequency without changing the distance between them.
REASONING PATH
Your ACEpath teacher’s suggested approach- Source vs. Observer Motion in Doppler Effect
Wavelength in the medium changes only when the source moves through the medium (). When only the observer moves, the wavelength in the medium remains .
Identify whether the source or the observer is moving relative to the air before calculating .
CORRECTED PATH
ACEpath Teacher's DemonstrationRecognize that because the source is stationary relative to the medium, the wavelength is fixed by the propagation speed in air: .
Calculate the detected frequency using the relative speed and the unchanged spatial wavelength: (or ).
(a) ; (b) ; (c)
02 The student confuses the sign for an approaching observer with moving away, subtracting the observer's speed instead of adding it.
Sample Student Work
Reviewed by ACEpath TeacherStep-by-Step Review
Walk Through It with Your Teacher- Step 1Correct
Because you are traveling toward the stationary horn, you and the oncoming sound waves are moving in opposite directions toward each other. The relative speed at which the wavefronts pass you is the sum of the speeds (), not the difference.
- Step 2
- Step 3Correct
Your formula and calculation method are completely sound, but substituting the incorrect relative speed from step 1 led to an underestimated frequency instead of an elevated Doppler pitch.
WHAT YOU DID WELL
Compliments from Your TeacherYou correctly recognized that the spatial wavelength is determined by the stationary source emitting into the air.
You correctly applied the fundamental wave relationship to connect relative wave speed, wavelength, and detected frequency.
THE ERROR
Where Your ACEpath Teacher Spotted the MistakeYou used a minus sign instead of a plus sign when calculating the relative speed of oncoming wavefronts for an approaching observer.
WHY IT HAPPENED
ACEpath Teacher's DiagnosisConfusing the sign convention of head-on relative velocity: when moving directly toward an oncoming wave, the relative speed must exceed the wave speed in the medium (). A decreased relative speed () only applies when moving away from the source or chasing the waves.
REASONING PATH
Your ACEpath teacher’s suggested approach- Head-on Relative Speed Check
When an observer moves toward oncoming waves, wavefronts pass by faster than at rest: .
Picture driving head-on into traffic or walking into the wind: speeds add together, so relative speed must be greater than .
- Doppler Qualitative Sanity Check
Approaching motion must always result in a higher perceived frequency ().
Compare your calculated to ; because it decreased despite approaching the sound, immediately recheck the sign of .
CORRECTED PATH
ACEpath Teacher's DemonstrationCalculate the relative speed of oncoming wavefronts: .
Calculate the physical wavelength: .
Calculate the detected frequency using the corrected relative speed: .
(a) ; (b) ; (c)
03 The student applies the Doppler formula for a moving source rather than a moving observer, modifying the denominator instead of the relative wave speed.
Sample Student Work
Reviewed by ACEpath TeacherStep-by-Step Review
Walk Through It with Your Teacher- Step 1Correct
In the reference frame of an observer moving directly toward oncoming sound waves, the relative speed of the wavefronts is the sum of the speed of sound through the air and the observer's speed.
- Step 2Correct
The wavelength in the medium is determined entirely by the motion of the source relative to the air. Because the horn is stationary, wavefronts are not physically compressed, so .
- Step 3Correct
You applied the Doppler formula for a source moving toward a stationary observer. For a moving observer approaching a stationary source, the shift arises from the increased relative wave speed in the numerator: .
WHAT YOU DID WELL
Compliments from Your TeacherYou correctly identified all given numerical values and their standard symbols.
THE ERROR
Where Your ACEpath Teacher Spotted the MistakeNone. The errors stem from a systematic conceptual confusion between observer motion and source motion in a mechanical wave medium.
WHY IT HAPPENED
ACEpath Teacher's DiagnosisYou assumed that observer motion compresses the physical wavelength in the medium and leaves the wave speed unchanged (analogous to light in vacuum), rather than recognizing that for mechanical waves in air, a moving observer encounters sound at a modified relative speed while the spatial spacing between wavefronts remains invariant.
REASONING PATH
Your ACEpath teacher’s suggested approach- Does the source or observer move relative to the medium?
Wavelength only changes when the source moves through the medium; relative wave speed only changes when the observer moves through the medium.
Check whether the source is stationary before altering the physical wavelength .
- Doppler Formula Selection
Moving observer: ; Moving source: .
Place the observer speed adjustment in the numerator and keep the denominator as when the source is stationary.
CORRECTED PATH
ACEpath Teacher's DemonstrationCalculate the relative speed of the wavefronts in the observer's frame: .
Determine the physical wavelength emitted by the stationary source: .
Calculate the detected frequency from the relative speed and wavelength: .
(a) ; (b) ; (c)
Lock it in
Does an observer moving toward a stationary sound source measure a smaller, larger, or identical wavelength compared to an observer at rest in the medium?
Identical wavelength. The physical spacing between wavefronts in the medium is determined entirely by the source's motion relative to the medium.
Similar question
A stationary siren produces sound with frequency in air where . A cyclist rides directly away from the siren at . Find (a) the relative speed of the sound waves in the cyclist's frame, (b) the physical wavelength measured by the cyclist, and (c) the detected frequency .
Answer
(a) . (b) The source is at rest, so . (c) .
A train moves at toward a stationary listener while sounding its horn at (). Calculate (a) the physical wavelength of the sound waves in front of the train and (b) the pitch detected by the stationary listener. Contrast this with the case where only the listener moves.
Answer
(a) Because the source moves through the medium, wavefronts are physically compressed: . (b) . Contrast: A moving source alters physical wavelength in the medium, whereas a moving observer leaves wavelength unchanged and only alters relative speed.
A boat moves at directly into incoming ocean swells that have a wavelength of and travel at relative to the water. (a) What is the frequency of the waves relative to a fixed buoy? (b) What frequency of wave encounters does the boat experience?
Answer
(a) Frequency in the water frame: (one crest every 4 seconds). (b) In the boat's frame, wave speed is . The wavelength is unchanged at , so .