Resources
Two point charges are fixed on the -axis: charge is located at , and charge is located at . Carefully accounting for vector directions and coordinate signs, calculate the magnitude and directional sign of the net electric field along the -axis at the origin (). State the net vector direction explicitly.
Answer and steps
Final answer
(directed along the -axis, or toward the left)
Steps
Principle and Formula for the Electric Field of a Point Charge
The electric field generated by a point charge at a distance has a magnitude given by Coulomb's law:
where Coulomb's constant is .
The vector direction depends on the sign of the source charge:
- Electric field lines point away from a positive charge.
- Electric field lines point toward a negative charge.
Electric Field Contribution from
- Charge and position: located at .
- Distance to origin: .
Calculate the magnitude of :
- Direction: Since is negative, the field at the origin points toward (to the left, in the -direction).
- Component: .
Electric Field Contribution from
- Charge and position: located at .
- Distance to origin: .
Calculate the magnitude of :
- Direction: Since is positive, the field at the origin points away from (to the left, in the -direction).
- Component: .
Superposition and Net Electric Field
By the principle of linear superposition, the total electric field along the -axis is the algebraic sum of the individual -components:
Key Pitfall to Avoid: Do not rely on purely algebraic signs from substituting negative numbers into coordinate equations without visualizing the field direction. Here, both charges are on opposite sides of the origin, and their signs cause both individual electric field vectors to point in the same direction (to the left, along the -axis).
Typical errors
01 The student confuses the sign of the charge with the vector direction of the electric field along the coordinate axis, assuming a positive charge always creates a positive field component and a negative charge creates a negative field component.
Sample Student Work
Reviewed by ACEpath TeacherStep-by-Step Review
Walk Through It with Your Teacher- Step 1
- Step 2
- Step 3Correct
The source charge is located to the right of the origin at . Because is positive, its electric field points radially away from . At the origin, 'away from ' points to the left (along the -axis), so its component must be negative ().
- Step 4Correct
Because had the incorrect sign, the resulting linear superposition sum is affected.
- Step 5
, sign is positive, direction is in the positive x-direction
Correct, sign is negative, directed along the -axis (to the left)
This conclusion follows from the affected superposition result in Step 4.
WHAT YOU DID WELL
Compliments from Your TeacherYou correctly calculated the separation distance from each charge to the evaluation point.
You used Coulomb's constant and the field magnitude equation accurately.
You correctly recognized that the net electric field along the axis is the algebraic sum of the individual field components.
THE ERROR
Where Your ACEpath Teacher Spotted the Mistakeno
WHY IT HAPPENED
ACEpath Teacher's DiagnosisYou treated the scalar sign of the source charge as the coordinate direction of the electric field vector instead of using field-line geometry (away from positive charges, toward negative charges) relative to the field point.
REASONING PATH
Your ACEpath teacher’s suggested approach- Magnitude First, Direction by Inspection
Calculate magnitude using absolute values: . Then assign vector signs from geometry: field lines point toward negative source charges and away from positive source charges.
Always sketch the point of interest and draw an arrow pointing away from positive charges and toward negative charges before assigning a or sign to the component.
CORRECTED PATH
ACEpath Teacher's DemonstrationDetermine the magnitude: .
Determine the spatial direction: Since is located at and is positive, the field at points away from (leftward, along the -direction), giving .
Sum the components: .
(magnitude , directed along the -axis, or toward the left)
02 The student assumes that charges on opposite sides of the origin must produce fields in opposite directions, subtracting their magnitudes instead of recognizing that both fields point toward the negative x-direction.
Sample Student Work
Reviewed by ACEpath TeacherStep-by-Step Review
Walk Through It with Your Teacher- Step 1
- Step 2Correct
You correctly found that points left toward the negative charge . However, the field of a positive source charge points away from that charge. Since is located to the right at , pointing away from at the origin means pointing to the left (along the -direction), not to the right.
- Step 3Correct
Your algebraic setup followed from the directional error in Step 2. Since both fields point in the negative -direction, their components should both be negative.
- Step 4Correct
Due to the earlier direction error, the final magnitude and sign do not reflect the combined reinforcing fields.
WHAT YOU DID WELL
Compliments from Your TeacherYou correctly used Coulomb's law to evaluate the field magnitudes from both point charges.
You correctly converted the charge units from nanocoulombs to coulombs.
You recognized that the field due to the negative charge points toward that charge.
THE ERROR
Where Your ACEpath Teacher Spotted the MistakeYou associated the positive sign of or its positive position with a positive () vector direction at the origin, instead of pointing radially away from .
WHY IT HAPPENED
ACEpath Teacher's DiagnosisConfusing the sign or position of a source charge with the spatial vector direction of its electric field. The electric field vector at an observation point always points radially away from a positive charge and radially toward a negative charge.
REASONING PATH
Your ACEpath teacher’s suggested approach- Field Direction Definition
The electric field points away from positive source charges and toward negative source charges.
Place an imaginary positive test charge at the point of interest and ask: does the source charge push it or pull it?
- Coordinate Projection
A vector pointing toward decreasing coordinate values has a negative component, regardless of whether the source charge is positive or negative.
Draw each vector arrow at the observation point first, then assign signs based strictly on the arrow's orientation relative to your coordinate axes.
CORRECTED PATH
ACEpath Teacher's DemonstrationAt the origin (), is located to the right at . Because is positive, its field points away from , which means pointing left (-direction): .
Because is negative and located to the left at , its field points toward , which also means pointing left (-direction): .
Sum the components along the -axis: .
03 The student forgets to square the distance r in the denominator of Coulomb's law for electric field.
Sample Student Work
Reviewed by ACEpath TeacherStep-by-Step Review
Walk Through It with Your Teacher- Step 1Correct
You omitted the exponent on the distance in the denominator. The electric field follows an inverse-square law, so the denominator must be , not .
- Step 2Correct
You repeated the missing square error for . The distance in the denominator must be squared: .
- Step 3Correct
Your directional reasoning is completely sound: both electric fields point toward the left along the -axis. The numerical result is inaccurate only because of the un-squared denominators in the previous steps.
- Step 4Correct
Your stated sign and vector direction are correct, but the final magnitude inherits the earlier calculation error.
WHAT YOU DID WELL
Compliments from Your TeacherYou correctly analyzed the directional behavior of the electric fields produced by both positive and negative point charges.
You correctly identified that the field from points toward the negative charge (left) and the field from points away from the positive charge (left).
You successfully summed the components along the -axis using the correct signs.
THE ERROR
Where Your ACEpath Teacher Spotted the Mistakeno
WHY IT HAPPENED
ACEpath Teacher's DiagnosisYou conflated the formula for the electric field of a point charge () with the formula for electric potential (), forgetting to square the radial distance in the denominator.
REASONING PATH
Your ACEpath teacher’s suggested approach- Formula checkpoint
The electric field of a point charge is governed by the inverse-square law: .
Always double-check that the radial distance is raised to the second power when finding field strength, distinguishing it from electric potential .
- Units checkpoint
Checking units: . Dividing by meters () yields , whereas dividing by meters squared () yields .
Perform dimensional analysis on your formula to ensure the result represents a force per unit charge ().
CORRECTED PATH
ACEpath Teacher's DemonstrationRecalculate with : .
Recalculate with : .
Combine the components pointing along the -axis: .
(directed along the -axis)
Lock it in
How do you correctly assign the sign of a 1D electric field component from a point charge?
Calculate magnitude as , then look at the point: field points AWAY from positive charges and TOWARD negative charges. Arrow right is , arrow left is .
Similar question
A charge is fixed at . Find the magnitude and directional sign of the electric field component at the origin ().
Answer
(directed toward the left, ). Magnitude is . Because is positive and located to the right of the origin, the field points away from , which is in the -direction.
Two charges are on the -axis: at and at . Calculate the net electric field vector at the origin.
Answer
(directed along the -axis). At , the field from points away from (to the right, ), so . The field from points toward (to the right, ), so . Summing gives .
Charge is at and charge is at . Determine the coordinate on the axis (excluding infinity) where the net electric field is zero.
Answer
. The zero point cannot be between the charges (both fields point left) nor to the right of (the larger charge is closer). It must lie to the left of (). Setting magnitudes equal: where distance to is and to is . Solving , so .