Resources

A proton with a mass of m=1.67×10−27 kgm = 1.67 \times 10^{-27}\text{ kg} and an electric charge of q=1.60×10−19 Cq = 1.60 \times 10^{-19}\text{ C} enters a uniform magnetic field of magnitude B=0.350 TB = 0.350\text{ T} directed perpendicular to its velocity. The proton travels at a constant speed of v=4.20×106 m/sv = 4.20 \times 10^{6}\text{ m/s}. Calculate the radius rr of the resulting circular path.

Answer and steps

Final answer

r=0.125 mr = 0.125\text{ m}

Steps

01

Identify the Governing Physical Principle

When a charged particle moves through a magnetic field perpendicular to its direction of motion, it experiences a magnetic Lorentz force given by:

FB=qvBsin⁡θF_B = qvB\sin\theta

Because the field is perpendicular to the velocity, θ=90∘\theta = 90^\circ and sin⁡(90∘)=1\sin(90^\circ) = 1, reducing the magnetic force to:

FB=qvBF_B = qvB

Since the magnetic force is always perpendicular to the instantaneous velocity, it does no work and changes only the direction of motion, not the speed. This magnetic force acts entirely as the centripetal force required for uniform circular motion:

Fc=mv2rF_c = \frac{mv^2}{r}


02

Derive the Expression for the Orbit Radius

Equate the centripetal force to the magnetic force:

mv2r=qvB\frac{mv^2}{r} = qvB

Dividing both sides by vv and solving for the orbital radius rr:

r=mvqBr = \frac{mv}{qB}

Common Pitfall: Be careful not to confuse the charge qq or mass mm of an electron with that of a proton. A proton has the same magnitude of fundamental charge (1.60×10−19 C1.60 \times 10^{-19}\text{ C}), but its mass is much larger (1.67×10−27 kg1.67 \times 10^{-27}\text{ kg}).


03

Substitute the Given Values and Calculate

Substitute the given quantities into the derived formula:

  • Mass of the proton: m=1.67×10−27 kgm = 1.67 \times 10^{-27}\text{ kg}
  • Speed: v=4.20×106 m/sv = 4.20 \times 10^6\text{ m/s}
  • Charge: q=1.60×10−19 Cq = 1.60 \times 10^{-19}\text{ C}
  • Magnetic field: B=0.350 TB = 0.350\text{ T}

r=(1.67×10−27 kg)(4.20×106 m/s)(1.60×10−19 C)(0.350 T)r = \frac{(1.67 \times 10^{-27}\text{ kg})(4.20 \times 10^6\text{ m/s})}{(1.60 \times 10^{-19}\text{ C})(0.350\text{ T})}

First, evaluate the numerator:

mv=7.014×10−21 kg⋅m/smv = 7.014 \times 10^{-21}\text{ kg}\cdot\text{m/s}

Next, evaluate the denominator:

qB=5.60×10−20 N⋅s/mqB = 5.60 \times 10^{-20}\text{ N}\cdot\text{s/m}

Now, divide the two values:

r=7.014×10−215.60×10−20≈0.12525 mr = \frac{7.014 \times 10^{-21}}{5.60 \times 10^{-20}} \approx 0.12525\text{ m}

Rounding to three significant figures:

r=0.125 mr = 0.125\text{ m}

Typical errors

OverviewACEpath Teacher's Diagnosis

01 The student forgets to cancel one power of velocity when equating the magnetic force to centripetal force, incorrectly setting r = m v² / (q B).

Sample Student Work

Reviewed by ACEpath Teacher
Step-by-Step Review
Walk Through It with Your Teacher
Incorrect
  1. Step 1

    FB=Fc  ⟹  qvB=mv2rF_B = F_c \implies qvB = \frac{mv^2}{r}

  2. Step 2

    r=mv2qBr = \frac{mv^2}{qB}

    Correct

    r=mvqBr = \frac{mv}{qB}

    When solving qvB=mv2rqvB = \frac{mv^2}{r} for rr, dividing both sides by vv cancels one power of velocity. You kept v2v^2 in the numerator instead of simplifying it to vv.

  3. Step 3

    r=(1.67×10−27)(4.20×106)2(1.60×10−19)(0.350)r = \frac{(1.67 \times 10^{-27})(4.20 \times 10^6)^2}{(1.60 \times 10^{-19})(0.350)}

    Correct

    r=(1.67×10−27 kg)(4.20×106 m/s)(1.60×10−19 C)(0.350 T)r = \frac{(1.67 \times 10^{-27}\text{ kg})(4.20 \times 10^6\text{ m/s})}{(1.60 \times 10^{-19}\text{ C})(0.350\text{ T})}

    You substituted the correct physical values into your formula, but the expression was squared due to the earlier algebraic error.

  4. Step 4

    r=2.95×10−145.60×10−20=5.26×105 mr = \frac{2.95 \times 10^{-14}}{5.60 \times 10^{-20}} = 5.26 \times 10^5\text{ m}

    Correct

    r=0.125 mr = 0.125\text{ m}

    Your arithmetic evaluation was consistent with your formula, but the resulting value is incorrect because of the uncanceled factor of vv.

WHAT YOU DID WELL
Compliments from Your Teacher

You correctly established that the magnetic force acts as the centripetal force for the proton's circular path.

You correctly substituted the values for the proton's mass, charge, velocity, and magnetic field.

THE ERROR
Where Your ACEpath Teacher Spotted the Mistake
Algebraic Simplification Error

You kept v2v^2 instead of canceling one factor of vv when rearranging qvB=mv2rqvB = \frac{mv^2}{r}.

WHY IT HAPPENED
ACEpath Teacher's Diagnosis

When rearranging a physics formula with a common variable on both sides, terms were moved without dividing out the common factor first.

REASONING PATH
Your ACEpath teacher’s suggested approach
Cancel common factors across sides
  • When an equation has the same variable on both sides, divide both sides by that variable before isolating the unknown: qvB=mv2r  ⟹  qB=mvrqvB = \frac{mv^2}{r} \implies qB = \frac{mv}{r}.

  • Always look for and divide out common variables across the equals sign before cross-multiplying or isolating.

Perform a dimensional check
  • Radius must have units of meters. With [m][v]/([q][B])=m[m][v]/([q][B]) = \text{m}, retaining v2v^2 produces m2/s\text{m}^2/\text{s}, signaling a missing cancellation.

  • Verify that your final algebraic formula yields the correct target units before substituting numerical values.

CORRECTED PATH
ACEpath Teacher's Demonstration
  1. Start from the force equilibrium: qvB=mv2rqvB = \frac{mv^2}{r}.

  2. Divide both sides by vv to cancel one factor of velocity: qB=mvrqB = \frac{mv}{r}.

  3. Multiply both sides by rr and divide by qBqB to isolate the radius: r=mvqBr = \frac{mv}{qB}.

  4. Substitute the given parameters: r=(1.67×10−27 kg)(4.20×106 m/s)(1.60×10−19 C)(0.350 T)r = \frac{(1.67 \times 10^{-27}\text{ kg})(4.20 \times 10^6\text{ m/s})}{(1.60 \times 10^{-19}\text{ C})(0.350\text{ T})}.

  5. Evaluate the quotient: r=7.014×10−215.60×10−20≈0.125 mr = \frac{7.014 \times 10^{-21}}{5.60 \times 10^{-20}} \approx 0.125\text{ m}.

Final answer

r=0.125 mr = 0.125\text{ m}

NEXT STEPS
Final Takeaways from Your Teacher
  • Practice deriving formulas symbolically and checking their dimensions before inserting numbers.

  • Solve problems involving charged particles in magnetic fields by explicitly simplifying r=mvqBr = \frac{mv}{qB}.

OverviewACEpath Teacher's Diagnosis

02 The student inverts the radius formula as r = q B / (m v) during algebraic manipulation.

Sample Student Work

Reviewed by ACEpath Teacher
Step-by-Step Review
Walk Through It with Your Teacher
Incorrect
  1. Step 1

    qvB=mv2rqvB = \frac{mv^2}{r}

  2. Step 2

    r=qBmvr = \frac{qB}{mv}

    Correct

    r=mvqBr = \frac{mv}{qB}

    When solving qvB=mv2rqvB = \frac{mv^2}{r} for rr, multiplying both sides by rr gives rqvB=mv2r q v B = m v^2. Dividing both sides by qvBq v B yields r=mvqBr = \frac{mv}{qB}, not qBmv\frac{qB}{mv}.

  3. Step 3

    r=1.60×10−19×0.3501.67×10−27×4.20×106=5.60×10−207.014×10−21=7.98 m−1  ⟹  r=7.98 mr = \frac{1.60 \times 10^{-19} \times 0.350}{1.67 \times 10^{-27} \times 4.20 \times 10^6} = \frac{5.60 \times 10^{-20}}{7.014 \times 10^{-21}} = 7.98\text{ m}^{-1} \implies r = 7.98\text{ m}

    Correct

    r=(1.67×10−27)(4.20×106)(1.60×10−19)(0.350)=7.014×10−215.60×10−20≈0.125 mr = \frac{(1.67 \times 10^{-27})(4.20 \times 10^6)}{(1.60 \times 10^{-19})(0.350)} = \frac{7.014 \times 10^{-21}}{5.60 \times 10^{-20}} \approx 0.125\text{ m}

    Your arithmetic on the inverted expression was carried out accurately (even noticing the reciprocal unit m−1\text{m}^{-1} initially), but the final numerical value is inverted because of the algebraic error in the previous step.

WHAT YOU DID WELL
Compliments from Your Teacher

You correctly recognized that the magnetic force acts as the centripetal force directing the proton into a circular orbit.

You accurately identified and substituted the correct physical constants and given values for the proton.

THE ERROR
Where Your ACEpath Teacher Spotted the Mistake
Algebraic inversion of target variable

no

WHY IT HAPPENED
ACEpath Teacher's Diagnosis

When isolating a variable from a denominator (rr in mv2r\frac{mv^2}{r}), you placed the terms from the opposite side (qBqB) into the numerator and the remaining terms (mvmv) into the denominator, resulting in 1r\frac{1}{r} rather than rr.

REASONING PATH
Your ACEpath teacher’s suggested approach
Isolating Variables in Denominators
  • To solve an equation of the form A=BxA = \frac{B}{x}, first cross-multiply to get Ax=BA x = B, then divide by AA to obtain x=BAx = \frac{B}{A}.

  • Always perform cross-multiplication or take reciprocals systematically rather than moving terms across the equals sign in a single intuitive step.

Dimensional Consistency Check
  • Radius must have dimensions of length ([L][\text{L}]), whereas qBmv\frac{qB}{mv} has dimensions of [L]−1[\text{L}]^{-1}.

  • Notice that your intermediate calculation yielded the unit m−1\text{m}^{-1}; whenever your units end up inverted, re-check your algebraic rearrangement.

CORRECTED PATH
ACEpath Teacher's Demonstration
  1. Solve qvB=mv2rqvB = \frac{mv^2}{r} for rr by multiplying both sides by rr: r(qvB)=mv2r(qvB) = mv^2.

  2. Divide both sides by qvBqvB: r=mv2qvB=mvqBr = \frac{mv^2}{qvB} = \frac{mv}{qB}.

  3. Substitute the given values: r=(1.67×10−27 kg)(4.20×106 m/s)(1.60×10−19 C)(0.350 T)r = \frac{(1.67 \times 10^{-27}\text{ kg})(4.20 \times 10^6\text{ m/s})}{(1.60 \times 10^{-19}\text{ C})(0.350\text{ T})}.

  4. Compute the quotient: r=7.014×10−215.60×10−20≈0.125 mr = \frac{7.014 \times 10^{-21}}{5.60 \times 10^{-20}} \approx 0.125\text{ m}.

Final answer

r=0.125 mr = 0.125\text{ m}

NEXT STEPS
Final Takeaways from Your Teacher
  • Practice isolating denominator variables across two explicit steps (cross-multiply, then divide).

  • Use dimensional analysis as a quick sanity check before plugging in numerical values.

OverviewACEpath Teacher's Diagnosis

03 The student mistakenly multiplies the denominator terms rather than dividing by both when evaluating on a calculator, effectively calculating (m v / q) × B.

Sample Student Work

Reviewed by ACEpath Teacher
Step-by-Step Review
Walk Through It with Your Teacher
Incorrect
  1. Step 1

    r=mvqB  ⟹  r=1.67×10−27×4.20×1061.60×10−19×0.350r = \frac{mv}{qB} \implies r = \frac{1.67 \times 10^{-27} \times 4.20 \times 10^{6}}{1.60 \times 10^{-19} \times 0.350}

  2. Step 2

    r=(7.014×10−211.60×10−19)×0.350r = \left(\frac{7.014 \times 10^{-21}}{1.60 \times 10^{-19}}\right) \times 0.350

    Correct

    r=7.014×10−21(1.60×10−19)(0.350)=7.014×10−215.60×10−20r = \frac{7.014 \times 10^{-21}}{(1.60 \times 10^{-19})(0.350)} = \frac{7.014 \times 10^{-21}}{5.60 \times 10^{-20}}

    Because B=0.350 TB = 0.350\text{ T} is in the denominator, you must divide the numerator by 0.3500.350, rather than multiplying the quotient by 0.3500.350. Written algebraically, ab×c=ab÷c\frac{a}{b \times c} = \frac{a}{b} \div c, not (ab)×c\left(\frac{a}{b}\right) \times c.

  3. Step 3

    r=0.0438×0.350=0.0153 mr = 0.0438 \times 0.350 = 0.0153\text{ m}

    Correct

    r=0.125 mr = 0.125\text{ m}

    This result follows directly from the earlier denominator grouping error.

WHAT YOU DID WELL
Compliments from Your Teacher

You correctly derived the circular orbit radius formula r=mvqBr = \frac{mv}{qB} by equating the magnetic Lorentz force to the centripetal force.

You accurately substituted each given value with the proper powers of ten into the equation.

THE ERROR
Where Your ACEpath Teacher Spotted the Mistake
Denominator Factor Multiplication Error

You moved the magnetic field factor 0.3500.350 outside the fraction as a multiplication factor instead of keeping it in the denominator as a divisor.

WHY IT HAPPENED
ACEpath Teacher's Diagnosis

Misinterpreting a multi-term denominator ab⋅c\frac{a}{b \cdot c} as ab⋅c\frac{a}{b} \cdot c. When evaluating expressions of the form ab⋅c\frac{a}{b \cdot c} step-by-step or in a calculator without explicit grouping parentheses, every factor in the denominator must be divided, not multiplied.

REASONING PATH
Your ACEpath teacher’s suggested approach
Grouping Denominator Terms
  • For any expression AB⋅C\frac{A}{B \cdot C}, the identity is AB⋅C=AB÷C=A(B⋅C)\frac{A}{B \cdot C} = \frac{A}{B} \div C = \frac{A}{(B \cdot C)}.

  • Always evaluate the complete denominator first or enter it into your calculator with explicit brackets: numerator / (B * C).

CORRECTED PATH
ACEpath Teacher's Demonstration
  1. Evaluate the entire denominator product first: (1.60×10−19 C)×(0.350 T)=5.60×10−20 N⋅s/m(1.60 \times 10^{-19}\text{ C}) \times (0.350\text{ T}) = 5.60 \times 10^{-20}\text{ N}\cdot\text{s/m}.

  2. Divide the evaluated numerator by this combined denominator: r=7.014×10−215.60×10−20r = \frac{7.014 \times 10^{-21}}{5.60 \times 10^{-20}}.

  3. Perform the division: r≈0.12525 mr \approx 0.12525\text{ m}.

Final answer

r=0.125 mr = 0.125\text{ m}

NEXT STEPS
Final Takeaways from Your Teacher
  • When calculating fractions with two numbers in the denominator, write parentheses around the entire denominator before computing.

  • Practice computing AB×C\frac{A}{B \times C} on your calculator as A ÷ B ÷ C to prevent unintentional multiplications.

Lock it in

Similar question

01

An electron (m=9.11×10−31 kgm = 9.11 \times 10^{-31}\text{ kg}, q=1.60×10−19 Cq = 1.60 \times 10^{-19}\text{ C}) moves at a speed of 2.50×106 m/s2.50 \times 10^6\text{ m/s} perpendicular to a uniform magnetic field of 0.0400 T0.0400\text{ T}. Calculate the radius of its circular orbit.

Answer

r=3.56×10−4 mr = 3.56 \times 10^{-4}\text{ m}. Using r=mvqBr = \frac{mv}{qB}, substitute values: r=(9.11×10−31 kg)(2.50×106 m/s)(1.60×10−19 C)(0.0400 T)=2.2775×10−246.40×10−21≈3.56×10−4 mr = \frac{(9.11 \times 10^{-31}\text{ kg})(2.50 \times 10^6\text{ m/s})}{(1.60 \times 10^{-19}\text{ C})(0.0400\text{ T})} = \frac{2.2775 \times 10^{-24}}{6.40 \times 10^{-21}} \approx 3.56 \times 10^{-4}\text{ m}.

02

An alpha particle (q=3.20×10−19 Cq = 3.20 \times 10^{-19}\text{ C}, m=6.64×10−27 kgm = 6.64 \times 10^{-27}\text{ kg}) is accelerated from rest through a potential difference of 1.50 kV1.50\text{ kV} and then enters a perpendicular magnetic field of 0.200 T0.200\text{ T}. Determine the radius of its path.

Answer

r=0.0394 mr = 0.0394\text{ m}. From conservation of energy, qV=12mv2  ⟹  v=2qVm=2(3.20×10−19 C)(1500 V)6.64×10−27 kg≈3.80×105 m/sqV = \frac{1}{2}mv^2 \implies v = \sqrt{\frac{2qV}{m}} = \sqrt{\frac{2(3.20 \times 10^{-19}\text{ C})(1500\text{ V})}{6.64 \times 10^{-27}\text{ kg}}} \approx 3.80 \times 10^5\text{ m/s}. Then r=mvqB=(6.64×10−27 kg)(3.80×105 m/s)(3.20×10−19 C)(0.200 T)≈0.0394 mr = \frac{mv}{qB} = \frac{(6.64 \times 10^{-27}\text{ kg})(3.80 \times 10^5\text{ m/s})}{(3.20 \times 10^{-19}\text{ C})(0.200\text{ T})} \approx 0.0394\text{ m}.

03

Two singly charged ions (q=1.60×10−19 Cq = 1.60 \times 10^{-19}\text{ C}) with masses m1=3.32×10−26 kgm_1 = 3.32 \times 10^{-26}\text{ kg} and m2=3.65×10−26 kgm_2 = 3.65 \times 10^{-26}\text{ kg} enter a uniform magnetic field B=0.500 TB = 0.500\text{ T} perpendicular to their velocity with the same kinetic energy K=1.20×10−16 JK = 1.20 \times 10^{-16}\text{ J}. Find the separation between their impact points after completing a semicircular path.

Answer

Δx=0.0118 m\Delta x = 0.0118\text{ m}. Express radius in terms of kinetic energy: p=2mK  ⟹  r=2mKqBp = \sqrt{2mK} \implies r = \frac{\sqrt{2mK}}{qB}. After completing a semicircle, the ions are separated by Δx=2r2−2r1=22KqB(m2−m1)\Delta x = 2r_2 - 2r_1 = \frac{2\sqrt{2K}}{qB}\left(\sqrt{m_2} - \sqrt{m_1}\right). Substituting the values yields Δx=22(1.20×10−16 J)(1.60×10−19 C)(0.500 T)(3.65×10−26−3.32×10−26)≈0.0118 m\Delta x = \frac{2\sqrt{2(1.20 \times 10^{-16}\text{ J})}}{(1.60 \times 10^{-19}\text{ C})(0.500\text{ T})}\left(\sqrt{3.65 \times 10^{-26}} - \sqrt{3.32 \times 10^{-26}}\right) \approx 0.0118\text{ m}.

Loading workspace…