Resources
A package of mass slides down a straight ramp inclined at an angle of above the horizontal. A motion sensor records that the package accelerates down the incline at a constant rate of . Taking , determine: (a) the magnitude of the kinetic frictional force acting on the package, and (b) the coefficient of kinetic friction between the ramp and the package.
Answer and steps
Final answer
(a) ; (b) .
Steps
Set up the coordinate system and identify forces
Choose a tilted Cartesian coordinate system:
- Let the positive -axis point down along the surface of the incline, in the direction of acceleration.
- Let the positive -axis point perpendicular to the incline, directed outward (upward from the surface).
The forces acting on the package are:
- The force of gravity (weight), , acting vertically downward with magnitude:
- The normal force, , exerted perpendicularly upward from the ramp surface (in the direction).
- The kinetic friction force, , opposing the motion along the surface (in the direction, directed up the incline).
Decompose the weight vector into components parallel and perpendicular to the incline:
- Parallel component: (down the incline)
- Perpendicular component: (into the incline)
Determine the kinetic frictional force (Part a)
Apply Newton's second law along the -axis (parallel to the incline):
Rearrange to solve for the frictional force :
Substitute the given values (, , , and ):
Common Pitfall: Do not confuse the component of gravity down the incline with the total net force. The package does not slide under gravity alone; friction opposes the motion, reducing the downward acceleration below .
Determine the normal force and coefficient of kinetic friction (Part b)
Because there is no motion or acceleration perpendicular to the incline, the forces along the -axis are in equilibrium:
Calculate the normal force:
The magnitude of kinetic friction is defined by:
Solve for the coefficient of kinetic friction :
Typical errors
01 The student interchanges sine and cosine for the parallel and perpendicular components of gravity along the incline.
Sample Student Work
Reviewed by ACEpath TeacherStep-by-Step Review
Walk Through It with Your Teacher- Step 1Correct
You used the cosine function instead of the sine function for the component of gravity acting parallel to the incline. Because is measured with respect to the horizontal, the side opposite the angle in the weight vector triangle is parallel to the ramp, making the downhill component .
- Step 2Correct
You used the sine function instead of the cosine function for the perpendicular component. The perpendicular component is adjacent to the angle between the downward vertical and the normal axis, giving .
- Step 3Correct
You correctly applied the relationship , but your final numerical answer was affected by the swapped trigonometric components from the previous steps.
WHAT YOU DID WELL
Compliments from Your TeacherYou correctly formulated Newton's second law along the incline by equating the net force to .
You accurately identified that kinetic friction is related to the normal force by and solved for algebraically.
You performed the algebraic rearrangements and arithmetic cleanly.
THE ERROR
Where Your ACEpath Teacher Spotted the Mistakeno
WHY IT HAPPENED
ACEpath Teacher's DiagnosisYou associated the cosine function with the incline direction and the sine function with the normal direction, reversing the standard geometry where the angle of inclination is measured from the horizontal floor.
REASONING PATH
Your ACEpath teacher’s suggested approach- Check the Flat Ground Limit ($\theta \to 0^\circ$)
As the incline angle approaches zero, the ramp becomes flat: the normal force must balance the entire weight () and the downhill pull must vanish ().
Test whether and give the physically expected limits: and .
- Decompose Weight Using Right-Triangle Geometry
When an incline rises at angle from the horizontal, the angle between the downward vertical gravity vector and the perpendicular to the incline is also .
Always draw the right triangle formed by : the adjacent leg is along the normal axis (), and the opposite leg points down the slope ().
CORRECTED PATH
ACEpath Teacher's DemonstrationDecompose the weight along the incline: .
Apply Newton's second law down the incline: .
Calculate the normal force perpendicular to the incline: .
Determine the coefficient of kinetic friction: .
(a) ; (b)
02 The student assumes the normal force equals mg rather than mg cos θ on an incline.
Sample Student Work
Reviewed by ACEpath TeacherStep-by-Step Review
Walk Through It with Your Teacher- Step 1
- Step 2Correct
On a ramp tilted at angle , only the perpendicular component of gravity balances the normal force, so , not .
- Step 3Correct
Your formula is correct, but your final value was affected by using the incorrect normal force from the previous step.
WHAT YOU DID WELL
Compliments from Your TeacherYou correctly resolved the component of gravity acting parallel to the incline as .
You applied Newton's second law along the ramp with the correct signs for gravity and friction.
You used the correct relationship to relate friction and the normal force.
THE ERROR
Where Your ACEpath Teacher Spotted the Mistakenone
WHY IT HAPPENED
ACEpath Teacher's DiagnosisYou defaulted to the horizontal-surface formula rather than decomposing weight into its perpendicular component along the tilted y-axis.
REASONING PATH
Your ACEpath teacher’s suggested approach- Decompose weight in tilted coordinates
For a surface tilted at an angle to the horizontal, weight components are and .
Always draw a right triangle showing the weight vector pointing straight down and find its component perpendicular to the ramp surface before writing .
- Enforce perpendicular equilibrium
When there is no acceleration off or into the ramp surface, .
Set unless extra applied forces have components perpendicular to the incline.
CORRECTED PATH
ACEpath Teacher's DemonstrationSet up perpendicular equilibrium along the -axis: .
Calculate the normal force: .
Substitute and into .
Compute .
(a) ; (b)
03 The student ignores acceleration and incorrectly assumes the parallel forces are in equilibrium, setting friction equal to the component of gravity.
Sample Student Work
Reviewed by ACEpath TeacherStep-by-Step Review
Walk Through It with Your Teacher- Step 1Correct
You set the kinetic friction equal to the gravitational component down the ramp (), which assumes zero net acceleration. Because the package accelerates down the ramp at , the net force along the incline is rather than zero.
- Step 2
- Step 3Correct
Your definition of and your arithmetic were correct, but the result was affected by the incorrect value of from Step 1.
WHAT YOU DID WELL
Compliments from Your TeacherYou correctly resolved the component of gravity perpendicular to the inclined ramp.
You correctly calculated the magnitude of the normal force.
You correctly applied the definition .
THE ERROR
Where Your ACEpath Teacher Spotted the MistakeYou treated an accelerating object as if it were sliding at constant velocity or in static equilibrium.
WHY IT HAPPENED
ACEpath Teacher's DiagnosisYou omitted the net force term in the parallel direction, equating friction directly to the downward gravitational component rather than setting .
REASONING PATH
Your ACEpath teacher’s suggested approach- Always check for acceleration
Along any axis of motion, . Only when does .
Read the problem statement carefully to see if acceleration is given or nonzero before writing down force balance equations.
- Set up Newton's second law explicitly
Write the complete equation first before isolating the unknown force.
CORRECTED PATH
ACEpath Teacher's DemonstrationWrite Newton's second law along the incline: .
Rearrange to solve for friction: .
Substitute the given values: .
Use the correct normal force to compute the coefficient of kinetic friction: .
(a) ; (b)
Lock it in
For an object on a ramp inclined at angle above the horizontal, which trigonometric component of gravity acts down the ramp?
. Because the angle inside the weight triangle is opposite to the ramp surface, the parallel component takes .
Similar question
A crate rests on a ramp inclined at to the horizontal. What is the magnitude of the normal force exerted by the ramp on the crate? (Use .)
Answer
. Key steps: .
A block slides down an incline tilted at above the horizontal at a constant velocity. Calculate the coefficient of kinetic friction between the block and the ramp. (Use .)
Answer
. Key steps: Since velocity is constant (), and . Therefore, .
A sled is pulled up a slope by a rope parallel to the slope. The coefficient of kinetic friction is . If the sled accelerates up the slope at , find the tension in the rope. (Use .)
Answer
. Key steps: . Friction opposes upward motion: . Downhill gravity component: . Along the incline: .