Resources

A model test car of mass m=0.850 kgm = 0.850\text{ kg} enters a vertical circular loop of radius R=1.60 mR = 1.60\text{ m} along a frictionless track. To prevent the car from falling off the track at the very top of the loop, the track must exert a normal force FN≥0 NF_N \ge 0\text{ N}, defining a critical threshold speed vcrit=gRv_{\text{crit}} = \sqrt{gR}. Taking the bottom of the loop (y=0 my = 0\text{ m}) as the reference level for potential energy, calculate: (a) the minimum kinetic energy KtopK_{\text{top}} and gravitational potential energy Ug,topU_{g,\text{top}} required at the apex (y=2Ry = 2R) to maintain contact, and (b) the minimum kinetic energy KbottomK_{\text{bottom}} the car must possess at the bottom of the loop to safely negotiate the track. Use g=9.80 m/s2g = 9.80\text{ m/s}^2.

Answer and steps

Final answer

(a) Ktop=6.66 JK_{\text{top}} = 6.66\text{ J}, Ug,top=26.7 JU_{g,\text{top}} = 26.7\text{ J}; (b) Kbottom=33.3 JK_{\text{bottom}} = 33.3\text{ J}.

Steps

Part (a): Kinetic and Potential Energy at the Top

  1. Calculate the minimum kinetic energy at the apex (KtopK_{\text{top}}): At the very top of the loop, the critical condition to maintain track contact (FN≥0F_N \ge 0) gives the minimum speed: vtop=gRv_{\text{top}} = \sqrt{gR} The kinetic energy is defined by K=12mv2K = \frac{1}{2}mv^2. Substituting vtop2=gRv_{\text{top}}^2 = gR: Ktop=12mgRK_{\text{top}} = \frac{1}{2}mgR Substitute the given values: Ktop=12(0.850 kg)(9.80 m/s2)(1.60 m)=6.664 J≈6.66 JK_{\text{top}} = \frac{1}{2}(0.850\text{ kg})(9.80\text{ m/s}^2)(1.60\text{ m}) = 6.664\text{ J} \approx 6.66\text{ J}
  2. Calculate the gravitational potential energy at the apex (Ug,topU_{g,\text{top}}): With the reference level y=0 my = 0\text{ m} set at the bottom of the loop, the height of the apex is the diameter of the circular track: htop=2R=2(1.60 m)=3.20 mh_{\text{top}} = 2R = 2(1.60\text{ m}) = 3.20\text{ m} The gravitational potential energy is: Ug,top=mghtop=mg(2R)=2mgRU_{g,\text{top}} = mgh_{\text{top}} = mg(2R) = 2mgR Substitute the given values: Ug,top=(0.850 kg)(9.80 m/s2)(3.20 m)=26.656 J≈26.7 JU_{g,\text{top}} = (0.850\text{ kg})(9.80\text{ m/s}^2)(3.20\text{ m}) = 26.656\text{ J} \approx 26.7\text{ J}

Part (b): Minimum Kinetic Energy at the Bottom

  1. Apply the Conservation of Mechanical Energy: Because the track is frictionless and only gravity and track-normal forces act (where the normal force does zero work as it is perpendicular to motion), total mechanical energy is conserved: Ebottom=EtopE_{\text{bottom}} = E_{\text{top}} Kbottom+Ug,bottom=Ktop+Ug,topK_{\text{bottom}} + U_{g,\text{bottom}} = K_{\text{top}} + U_{g,\text{top}}
  2. Calculate KbottomK_{\text{bottom}}: At the reference height y=0 my = 0\text{ m}, Ug,bottom=0 JU_{g,\text{bottom}} = 0\text{ J}. Therefore, all mechanical energy at the bottom is kinetic energy: Kbottom=Ktop+Ug,topK_{\text{bottom}} = K_{\text{top}} + U_{g,\text{top}} Kbottom=12mgR+2mgR=52mgRK_{\text{bottom}} = \frac{1}{2}mgR + 2mgR = \frac{5}{2}mgR Summing the values found in Part (a): Kbottom=6.664 J+26.656 J=33.32 J≈33.3 JK_{\text{bottom}} = 6.664\text{ J} + 26.656\text{ J} = 33.32\text{ J} \approx 33.3\text{ J}

Pitfall note: Do not assume the car can have zero speed at the apex. A vertical circular loop requires a non-zero critical speed (v=gRv = \sqrt{gR}) at the apex to provide the necessary centripetal acceleration so the car does not drop off the track.

Typical errors

OverviewACEpath Teacher's Diagnosis

01 The student confuses the height of the apex with the loop radius R instead of the diameter 2R when calculating gravitational potential energy.

Sample Student Work

Reviewed by ACEpath Teacher
Step-by-Step Review
Walk Through It with Your Teacher
Partially correct
  1. Step 1

    vtop2=gR=9.80×1.60=15.68 m2/s2  ⟹  Ktop=(1/2)mvtop2=0.5×0.850×15.68=6.664 Jv_{\text{top}}^2 = gR = 9.80 \times 1.60 = 15.68\text{ m}^2/\text{s}^2 \implies K_{\text{top}} = (1/2)m v_{\text{top}}^2 = 0.5 \times 0.850 \times 15.68 = 6.664\text{ J}

  2. Step 2

    htop=R=1.60 m  ⟹  Ug,top=mgh=0.850×9.80×1.60=13.328 Jh_{\text{top}} = R = 1.60\text{ m} \implies U_{g,\text{top}} = mgh = 0.850 \times 9.80 \times 1.60 = 13.328\text{ J}

    Correct

    htop=2R=3.20 m  ⟹  Ug,top=mg(2R)=0.850×9.80×3.20=26.656 J≈26.7 Jh_{\text{top}} = 2R = 3.20\text{ m} \implies U_{g,\text{top}} = mg(2R) = 0.850 \times 9.80 \times 3.20 = 26.656\text{ J} \approx 26.7\text{ J}

    You set the height of the loop apex to the radius RR rather than the full diameter 2R2R above the track bottom (y=0 my = 0\text{ m}).

  3. Step 3

    Kbottom=Ktop+Ug,top=6.664+13.328=19.992 JK_{\text{bottom}} = K_{\text{top}} + U_{g,\text{top}} = 6.664 + 13.328 = 19.992\text{ J}

    Correct

    Kbottom=Ktop+Ug,top=6.664+26.656=33.32 J≈33.3 JK_{\text{bottom}} = K_{\text{top}} + U_{g,\text{top}} = 6.664 + 26.656 = 33.32\text{ J} \approx 33.3\text{ J}

    Your conservation of mechanical energy formulation was set up correctly, but substituting the incorrect potential energy gave an incorrect final value.

WHAT YOU DID WELL
Compliments from Your Teacher

You correctly used the critical speed condition vtop2=gRv_{\text{top}}^2 = gR to find the apex kinetic energy.

You correctly stated and applied the conservation of mechanical energy principle between the top and bottom of the loop.

THE ERROR
Where Your ACEpath Teacher Spotted the Mistake
Geometry misconception in potential energy reference height

You substituted the radius RR instead of the diameter 2R2R for the height of the apex above the base of the vertical circular loop.

WHY IT HAPPENED
ACEpath Teacher's Diagnosis

Confusing the vertical coordinate of the apex with the radius of curvature instead of measuring the full vertical displacement from the baseline reference level at y=0 my = 0\text{ m}.

REASONING PATH
Your ACEpath teacher’s suggested approach
Establish the vertical reference baseline
  • For a vertical circle resting on a horizontal ground at y=0y = 0, the apex is at height h=2Rh = 2R, while the center is at h=Rh = R.

  • Sketch the circle, mark the reference line y=0y = 0 at the bottom contact point, and verify the height to the top is 2R2R before computing Ug=mghU_g = mgh.

CORRECTED PATH
ACEpath Teacher's Demonstration
  1. Set the correct apex height measured from the bottom: htop=2R=2(1.60 m)=3.20 mh_{\text{top}} = 2R = 2(1.60\text{ m}) = 3.20\text{ m}.

  2. Recalculate gravitational potential energy: Ug,top=mghtop=(0.850 kg)(9.80 m/s2)(3.20 m)=26.656 J≈26.7 JU_{g,\text{top}} = mgh_{\text{top}} = (0.850\text{ kg})(9.80\text{ m/s}^2)(3.20\text{ m}) = 26.656\text{ J} \approx 26.7\text{ J}.

  3. Apply energy conservation to find the kinetic energy at the bottom: Kbottom=Ktop+Ug,top=6.664 J+26.656 J=33.32 J≈33.3 JK_{\text{bottom}} = K_{\text{top}} + U_{g,\text{top}} = 6.664\text{ J} + 26.656\text{ J} = 33.32\text{ J} \approx 33.3\text{ J}.

Final answer

(a) Ktop=6.66 JK_{\text{top}} = 6.66\text{ J}, Ug,top=26.7 JU_{g,\text{top}} = 26.7\text{ J}; (b) Kbottom=33.3 JK_{\text{bottom}} = 33.3\text{ J}

NEXT STEPS
Final Takeaways from Your Teacher
  • Double-check geometric dimensions on vertical circular motion problems by explicitly writing htop=2Rh_{\text{top}} = 2R.

  • Review how kinetic and potential energy trade off at key points (bottom, horizontal equator, and apex) of a vertical loop.

OverviewACEpath Teacher's Diagnosis

02 The student assumes the car can just come to rest at the top with zero kinetic energy rather than maintaining the critical speed required to prevent falling.

Sample Student Work

Reviewed by ACEpath Teacher
Step-by-Step Review
Walk Through It with Your Teacher
Partially correct
  1. Step 1

    vtop=0 m/s  ⟹  Ktop=0 Jv_{\text{top}} = 0\text{ m/s} \implies K_{\text{top}} = 0\text{ J}

    Correct

    vtop=gR  ⟹  Ktop=12mgR=12(0.850 kg)(9.80 m/s2)(1.60 m)≈6.66 Jv_{\text{top}} = \sqrt{gR} \implies K_{\text{top}} = \frac{1}{2}mgR = \frac{1}{2}(0.850\text{ kg})(9.80\text{ m/s}^2)(1.60\text{ m}) \approx 6.66\text{ J}

    In a vertical circular loop, gravity acts downward at the apex. If the car had zero speed, it would simply fall downward off the track. To stay in circular contact with FN≥0F_N \ge 0, gravity must provide the necessary centripetal acceleration, requiring a minimum speed of vcrit=gRv_{\text{crit}} = \sqrt{gR}.

  2. Step 2

    htop=2R=2×1.60=3.20 m  ⟹  Ug,top=mgh=0.850×9.80×3.20=26.656 Jh_{\text{top}} = 2R = 2 \times 1.60 = 3.20\text{ m} \implies U_{g,\text{top}} = mgh = 0.850 \times 9.80 \times 3.20 = 26.656\text{ J}

  3. Step 3

    Kbottom=Ktop+Ug,top  ⟹  Kbottom=0+26.656=26.656 JK_{\text{bottom}} = K_{\text{top}} + U_{g,\text{top}} \implies K_{\text{bottom}} = 0 + 26.656 = 26.656\text{ J}

    Correct

    Kbottom=Ktop+Ug,top=6.664 J+26.656 J≈33.3 JK_{\text{bottom}} = K_{\text{top}} + U_{g,\text{top}} = 6.664\text{ J} + 26.656\text{ J} \approx 33.3\text{ J}

    Your conservation of mechanical energy equation is completely correct, but substituting Ktop=0 JK_{\text{top}} = 0\text{ J} carried forward the error from Step 1.

WHAT YOU DID WELL
Compliments from Your Teacher

You correctly calculated the height and gravitational potential energy at the apex of the loop.

You correctly formulated the conservation of mechanical energy between the bottom and the top of the loop.

THE ERROR
Where Your ACEpath Teacher Spotted the Mistake
Zero-speed assumption at vertical apex

Assuming the car can just reach the top with zero speed (v=0 m/sv = 0\text{ m/s}).

WHY IT HAPPENED
ACEpath Teacher's Diagnosis

Treating a vertical circular loop as if it were a simple vertical ramp or projectile turning point where velocity can reach zero, overlooking the centripetal acceleration condition (FN+mg=mv2RF_N + mg = m\frac{v^2}{R} with FN≥0F_N \ge 0) required to maintain circular contact.

REASONING PATH
Your ACEpath teacher’s suggested approach
Minimum Speed at Apex
  • At the top of a vertical loop of radius RR, maintaining circular motion requires vtop≥gRv_{\text{top}} \ge \sqrt{gR}.

  • Check whether the object is traveling in a vertical circle rather than coming to rest on a horizontal surface or at a projectile apex before setting K=0K = 0.

Centripetal Force at Critical Contact
  • Critical track contact occurs when normal force vanishes: FN=0  ⟹  mg=mv2RF_N = 0 \implies mg = m\frac{v^2}{R}.

  • Set FN=0F_N = 0 in the radial Newton's second law equation to verify the minimum kinetic energy Kcrit=12mgRK_{\text{crit}} = \frac{1}{2}mgR.

CORRECTED PATH
ACEpath Teacher's Demonstration
  1. Set the minimum speed at the apex to vtop=gRv_{\text{top}} = \sqrt{gR}, giving Ktop=12m(gR)2=12mgRK_{\text{top}} = \frac{1}{2}m(\sqrt{gR})^2 = \frac{1}{2}mgR.

  2. Evaluate Ktop=12(0.850 kg)(9.80 m/s2)(1.60 m)=6.664 J≈6.66 JK_{\text{top}} = \frac{1}{2}(0.850\text{ kg})(9.80\text{ m/s}^2)(1.60\text{ m}) = 6.664\text{ J} \approx 6.66\text{ J}.

  3. Substitute Ktop=6.664 JK_{\text{top}} = 6.664\text{ J} into your energy conservation equation: Kbottom=Ktop+Ug,top=6.664 J+26.656 J=33.32 J≈33.3 JK_{\text{bottom}} = K_{\text{top}} + U_{g,\text{top}} = 6.664\text{ J} + 26.656\text{ J} = 33.32\text{ J} \approx 33.3\text{ J}.

Final answer

(a) Ktop=6.66 JK_{\text{top}} = 6.66\text{ J}, Ug,top=26.7 JU_{g,\text{top}} = 26.7\text{ J}; (b) Kbottom=33.3 JK_{\text{bottom}} = 33.3\text{ J}

NEXT STEPS
Final Takeaways from Your Teacher
  • Review the free-body diagram for an object at the top of a vertical circular track to see why FN+mg=mv2/RF_N + mg = mv^2/R.

  • Practice identifying the difference between objects constrained by rigid rods (which can reach v=0v = 0) and objects on tracks or strings (which require v≥gRv \ge \sqrt{gR}).

  • Complete the follow-up practice problems to reinforce calculating total energy in vertical loops.

OverviewACEpath Teacher's Diagnosis

03 The student equates the kinetic energy at the bottom directly to the kinetic energy at the top, ignoring the change in gravitational potential energy.

Sample Student Work

Reviewed by ACEpath Teacher
Step-by-Step Review
Walk Through It with Your Teacher
Partially correct
  1. Step 1

    vtop2=gR=9.80×1.60=15.68 m2/s2  ⟹  Ktop=(12)mvtop2=0.5×0.850×15.68=6.664 Jv_{\text{top}}^2 = gR = 9.80 \times 1.60 = 15.68\text{ m}^2/\text{s}^2 \implies K_{\text{top}} = \left(\frac{1}{2}\right)m v_{\text{top}}^2 = 0.5 \times 0.850 \times 15.68 = 6.664\text{ J}

  2. Step 2

    htop=2R=3.20 m  ⟹  Ug,top=mgh=0.850×9.80×3.20=26.656 Jh_{\text{top}} = 2R = 3.20\text{ m} \implies U_{g,\text{top}} = mgh = 0.850 \times 9.80 \times 3.20 = 26.656\text{ J}

  3. Step 3

    Kbottom=Ktop=6.664 JK_{\text{bottom}} = K_{\text{top}} = 6.664\text{ J}

    Correct

    Kbottom=Ktop+Ug,top=6.664 J+26.656 J=33.32 J≈33.3 JK_{\text{bottom}} = K_{\text{top}} + U_{g,\text{top}} = 6.664\text{ J} + 26.656\text{ J} = 33.32\text{ J} \approx 33.3\text{ J}

    You set the kinetic energy at the bottom equal to the kinetic energy at the top. Because the car loses height as it moves from the top to the bottom, that lost gravitational potential energy converts into additional kinetic energy.

WHAT YOU DID WELL
Compliments from Your Teacher

You correctly calculated the critical velocity squared at the top of the loop.

You accurately computed the kinetic energy at the top using K=12mv2K = \frac{1}{2}mv^2.

You correctly determined the apex height as the track diameter and evaluated the gravitational potential energy.

THE ERROR
Where Your ACEpath Teacher Spotted the Mistake
Omission of potential energy conversion in mechanical energy conservation

No, this is a conceptual misunderstanding of how total mechanical energy is partitioned between kinetic and potential energy at different heights.

WHY IT HAPPENED
ACEpath Teacher's Diagnosis

You assumed that kinetic energy remains constant throughout the motion, overlooking that total mechanical energy (E=K+UgE = K + U_g) is the conserved quantity on a frictionless track.

REASONING PATH
Your ACEpath teacher’s suggested approach
Conservation of Mechanical Energy
  • On a frictionless surface with no non-conservative work, Etotal=K+UgE_{\text{total}} = K + U_g remains constant.

  • Always equate total initial energy (Ki+Ui)(K_i + U_i) to total final energy (Kf+Uf)(K_f + U_f), rather than equating kinetic energies directly.

CORRECTED PATH
ACEpath Teacher's Demonstration
  1. Apply conservation of mechanical energy between the bottom (y=0 my = 0\text{ m}) and the top (y=2Ry = 2R): Kbottom+Ug,bottom=Ktop+Ug,topK_{\text{bottom}} + U_{g,\text{bottom}} = K_{\text{top}} + U_{g,\text{top}}.

  2. Substitute Ug,bottom=0 JU_{g,\text{bottom}} = 0\text{ J}: Kbottom=Ktop+Ug,topK_{\text{bottom}} = K_{\text{top}} + U_{g,\text{top}}.

  3. Add the kinetic and potential energies computed in Part (a): Kbottom=6.664 J+26.656 J=33.32 JK_{\text{bottom}} = 6.664\text{ J} + 26.656\text{ J} = 33.32\text{ J}.

Final answer

(a) Ktop≈6.66 JK_{\text{top}} \approx 6.66\text{ J}, Ug,top≈26.7 JU_{g,\text{top}} \approx 26.7\text{ J}; (b) Kbottom≈33.3 JK_{\text{bottom}} \approx 33.3\text{ J}

NEXT STEPS
Final Takeaways from Your Teacher
  • When solving vertical circular motion problems, write down the full conservation equation K1+U1=K2+U2K_1 + U_1 = K_2 + U_2 before substituting numerical values.

  • Practice tracking energy trade-offs between gravitational potential energy and kinetic energy as objects change height.

Lock it in

Similar question

01

A 0.50 kg0.50\text{ kg} toy car traverses a vertical frictionless loop of radius R=0.80 mR = 0.80\text{ m}. With y=0y = 0 at the bottom of the loop and g=9.80 m/s2g = 9.80\text{ m/s}^2, find the gravitational potential energy of the car when it is at the apex of the loop.

Answer

Ug,top=7.84 JU_{g,\text{top}} = 7.84\text{ J}. Key steps: htop=2R=2(0.80 m)=1.60 mh_{\text{top}} = 2R = 2(0.80\text{ m}) = 1.60\text{ m}; Ug,top=mghtop=(0.50)(9.80)(1.60)=7.84 JU_{g,\text{top}} = mgh_{\text{top}} = (0.50)(9.80)(1.60) = 7.84\text{ J}.

02

A cart of mass m=1.20 kgm = 1.20\text{ kg} completes a frictionless vertical loop of radius R=2.50 mR = 2.50\text{ m} with the minimum critical speed at the apex (vtop=gRv_{\text{top}} = \sqrt{gR}). Taking g=9.80 m/s2g = 9.80\text{ m/s}^2 and y=0y = 0 at the bottom of the loop, find the total mechanical energy EE of the cart.

Answer

E=73.5 JE = 73.5\text{ J}. Key steps: Ktop=12mgR=0.5(1.20)(9.80)(2.50)=14.7 JK_{\text{top}} = \frac{1}{2}mgR = 0.5(1.20)(9.80)(2.50) = 14.7\text{ J}; Ug,top=mg(2R)=(1.20)(9.80)(5.00)=58.8 JU_{g,\text{top}} = mg(2R) = (1.20)(9.80)(5.00) = 58.8\text{ J}; E=Ktop+Ug,top=52mgR=73.5 JE = K_{\text{top}} + U_{g,\text{top}} = \frac{5}{2}mgR = 73.5\text{ J}.

03

A roller coaster car is released from rest at height HH above the ground and enters a circular loop of radius RR whose bottom rests on the ground (y=0y = 0). Assuming negligible friction, derive the minimum release height HH in terms of RR so the car safely stays on the track at the top of the loop.

Answer

H=2.5RH = 2.5R (or H=52RH = \frac{5}{2}R). Key steps: At apex, minimum speed requires vtop2=gRv_{\text{top}}^2 = gR, so Ktop=12mgRK_{\text{top}} = \frac{1}{2}mgR. Height at apex is htop=2Rh_{\text{top}} = 2R, so Ug,top=2mgRU_{g,\text{top}} = 2mgR. Total energy at apex is E=52mgRE = \frac{5}{2}mgR. By conservation of energy from rest, mgH=E=52mgR  ⟹  H=52R=2.5RmgH = E = \frac{5}{2}mgR \implies H = \frac{5}{2}R = 2.5R.

Loading workspace…