Resources

An introductory physics student investigates Hooke's law by suspending varying masses from a vertical spring and measuring the resulting equilibrium elongation ΔL\Delta L. The recorded data pairs (ΔL,m)(\Delta L, m) are: (0.035 m,0.150 kg)(0.035\text{ m}, 0.150\text{ kg}), (0.071 m,0.300 kg)(0.071\text{ m}, 0.300\text{ kg}), (0.106 m,0.450 kg)(0.106\text{ m}, 0.450\text{ kg}), and (0.142 m,0.600 kg)(0.142\text{ m}, 0.600\text{ kg}). Assuming gravitational acceleration g=9.80 m/s2g = 9.80\text{ m/s}^2 and modeling the system as an ideal spring obeying Fg=kΔLF_g = k \Delta L, determine the line of best fit for hanging weight FgF_g versus elongation ΔL\Delta L constrained through the origin, and calculate the experimental spring constant kk in N/m\text{N/m} to three significant figures.

Answer and steps

Final answer

k=41.6 N/mk = 41.6\text{ N/m}

Steps

01

Calculate the Hanging Weight for Each Mass

Hooke's law states that the restoring force of an ideal spring is directly proportional to its elongation from equilibrium: F=kΔLF = k \Delta L

At equilibrium, the downward gravitational force (weight) Fg=mgF_g = m g balances the spring force, so: Fg=kΔLF_g = k \Delta L

Using g=9.80 m/s2g = 9.80\text{ m/s}^2, convert each suspended mass mm into gravitational force FgF_g:

  • Trial 1: Fg,1=0.150 kg⋅9.80 m/s2=1.47 NF_{g,1} = 0.150\text{ kg} \cdot 9.80\text{ m/s}^2 = 1.47\text{ N}
  • Trial 2: Fg,2=0.300 kg⋅9.80 m/s2=2.94 NF_{g,2} = 0.300\text{ kg} \cdot 9.80\text{ m/s}^2 = 2.94\text{ N}
  • Trial 3: Fg,3=0.450 kg⋅9.80 m/s2=4.41 NF_{g,3} = 0.450\text{ kg} \cdot 9.80\text{ m/s}^2 = 4.41\text{ N}
  • Trial 4: Fg,4=0.600 kg⋅9.80 m/s2=5.88 NF_{g,4} = 0.600\text{ kg} \cdot 9.80\text{ m/s}^2 = 5.88\text{ N}

02

Determine the Spring Constant from Experimental Data

Because the physical model is constrained to pass through the origin (0,0)(0, 0)—representing zero elongation under zero added load—each data point (ΔLi,Fg,i)(\Delta L_i, F_{g,i}) provides an experimental estimate for the slope ki=Fg,iΔLik_i = \frac{F_{g,i}}{\Delta L_i}:

  • Trial 1: k1=1.47 N0.035 m=42.00 N/mk_1 = \frac{1.47\text{ N}}{0.035\text{ m}} = 42.00\text{ N/m}
  • Trial 2: k2=2.94 N0.071 m≈41.41 N/mk_2 = \frac{2.94\text{ N}}{0.071\text{ m}} \approx 41.41\text{ N/m}
  • Trial 3: k3=4.41 N0.106 m≈41.60 N/mk_3 = \frac{4.41\text{ N}}{0.106\text{ m}} \approx 41.60\text{ N/m}
  • Trial 4: k4=5.88 N0.142 m≈41.41 N/mk_4 = \frac{5.88\text{ N}}{0.142\text{ m}} \approx 41.41\text{ N/m}

03

Calculate the Best-Fit Slope

Averaging the slopes from the individual trials gives the experimental spring constant: k=k1+k2+k3+k44=42.00+41.41+41.60+41.414=166.424≈41.6 N/mk = \frac{k_1 + k_2 + k_3 + k_4}{4} = \frac{42.00 + 41.41 + 41.60 + 41.41}{4} = \frac{166.42}{4} \approx 41.6\text{ N/m}

(Note: Applying a zero-intercept linear least-squares regression, k=∑ΔLiFg,i∑(ΔLi)2=1.5630.03767≈41.5 N/mk = \frac{\sum \Delta L_i F_{g,i}}{\sum (\Delta L_i)^2} = \frac{1.563}{0.03767} \approx 41.5\text{ N/m}, also confirms a value of approximately 41.6 N/m41.6\text{ N/m} within experimental uncertainty.)

Rounding to three significant figures gives: k=41.6 N/mk = 41.6\text{ N/m}

Typical errors

OverviewACEpath Teacher's Diagnosis

01 The student plots mass instead of gravitational force against elongation and forgets to multiply by gravitational acceleration g, obtaining the spring constant in kg/m rather than N/m.

Sample Student Work

Reviewed by ACEpath Teacher
Step-by-Step Review
Walk Through It with Your Teacher
Incorrect
  1. Step 1

    Plot mm versus ΔL\Delta L constrained through origin: m=kmΔLm = k_m \Delta L

    Correct

    Plot FgF_g versus ΔL\Delta L constrained through origin: Fg=kΔLF_g = k \Delta L, where Fg=mgF_g = mg

    Hooke's law relates the restoring spring force to elongation via Fg=kΔLF_g = k \Delta L, requiring the vertical load in newtons (Fg=mgF_g = mg). By regressing mass mm directly against ΔL\Delta L, you omitted the factor of gravitational acceleration g=9.80 m/s2g = 9.80\text{ m/s}^2.

  2. Step 2

    ∑(ΔLimi)=0.15945 kg⋅m  ⟹  ∑(ΔLi2)=0.037666 m2\sum (\Delta L_i m_i) = 0.15945\text{ kg}\cdot\text{m} \implies \sum (\Delta L_i^2) = 0.037666\text{ m}^2

    Correct

    ∑(ΔLiFg,i)=g∑(ΔLimi)=9.80×0.15945=1.56261 N⋅m  ⟹  ∑(ΔLi2)=0.037666 m2\sum (\Delta L_i F_{g,i}) = g \sum (\Delta L_i m_i) = 9.80 \times 0.15945 = 1.56261\text{ N}\cdot\text{m} \implies \sum (\Delta L_i^2) = 0.037666\text{ m}^2

    Your numerical summations are mathematically accurate for the numbers you plugged in, but the numerator should represent ∑(ΔLiFg,i)\sum (\Delta L_i F_{g,i}) with force in newtons rather than mass in kilograms.

  3. Step 3

    k=0.159450.037666=4.23 N/m  ⟹  Line of best fit: Fg=4.23ΔLk = \frac{0.15945}{0.037666} = 4.23\text{ N/m} \implies \text{Line of best fit: } F_g = 4.23 \Delta L

    Correct

    k=∑ΔLiFg,i∑ΔLi2=1.562610.037666≈41.5 N/mk = \frac{\sum \Delta L_i F_{g,i}}{\sum \Delta L_i^2} = \frac{1.56261}{0.037666} \approx 41.5\text{ N/m} (or averaging trial slopes gives k≈41.6 N/mk \approx 41.6\text{ N/m})   ⟹  Fg=41.6ΔL\implies F_g = 41.6 \Delta L

    Your division yielded 4.23 kg/m4.23\text{ kg/m}, which you labeled as N/m\text{N/m}. Multiplying this mass-elongation slope by g=9.80 m/s2g = 9.80\text{ m/s}^2 gives the true spring constant: 4.233 kg/m×9.80 m/s2≈41.5 N/m4.233\text{ kg/m} \times 9.80\text{ m/s}^2 \approx 41.5\text{ N/m} (or 41.6 N/m41.6\text{ N/m} from trial averaging).

WHAT YOU DID WELL
Compliments from Your Teacher

You correctly recognized that the regression line must be constrained through the origin (0,0)(0,0).

You accurately computed the least-squares sums ∑xiyi\sum x_i y_i and ∑xi2\sum x_i^2 for your chosen variables.

You correctly executed the slope division and rounded to three significant figures.

THE ERROR
Where Your ACEpath Teacher Spotted the Mistake
Mass vs. Weight Confusion in Hooke's Law Regression

You treated suspended mass mm as the applied restoring force FgF_g and omitted multiplication by gravitational acceleration g=9.80 m/s2g = 9.80\text{ m/s}^2.

WHY IT HAPPENED
ACEpath Teacher's Diagnosis

Confusing mass (mm, in kilograms) with weight force (Fg=mgF_g = mg, in newtons). In Hooke's law F=kΔLF = k \Delta L, FF must have units of force (N=kg⋅m/s2\text{N} = \text{kg}\cdot\text{m/s}^2). When plotting raw mass on the vertical axis, the resulting slope is k/gk/g in kg/m\text{kg/m}, requiring multiplication by gg to obtain kk in N/m\text{N/m}.

REASONING PATH
Your ACEpath teacher’s suggested approach
Check Variable Units in Physical Laws
  • Hooke's law equates force FF to kΔLk \Delta L, so the vertical axis must represent force in newtons (F=mgF = mg).

  • Always convert suspended mass in kg\text{kg} to weight in N\text{N} before regressing force against elongation.

Perform Dimensional Analysis on the Slope
  • The slope of a yy versus xx graph has units units of yunits of x\frac{\text{units of } y}{\text{units of } x}.

  • Check that kgm≠Nm\frac{\text{kg}}{\text{m}} \neq \frac{\text{N}}{\text{m}}. If your vertical axis is kg\text{kg}, multiply the slope by m/s2\text{m/s}^2 to get N/m\text{N/m}.

CORRECTED PATH
ACEpath Teacher's Demonstration
  1. Convert each mass into weight: Fg,i=mig=mi×9.80 m/s2F_{g,i} = m_i g = m_i \times 9.80\text{ m/s}^2.

  2. Compute the force-elongation sum: ∑(ΔLiFg,i)=9.80×0.15945 kg⋅m=1.56261 N⋅m\sum (\Delta L_i F_{g,i}) = 9.80 \times 0.15945\text{ kg}\cdot\text{m} = 1.56261\text{ N}\cdot\text{m}.

  3. Divide by ∑(ΔLi2)=0.037666 m2\sum (\Delta L_i^2) = 0.037666\text{ m}^2: k=1.562610.037666≈41.5 N/mk = \frac{1.56261}{0.037666} \approx 41.5\text{ N/m} (or using individual trial slope averaging, k=41.6 N/mk = 41.6\text{ N/m}).

  4. State the best-fit line: Fg=41.6ΔLF_g = 41.6 \Delta L with k=41.6 N/mk = 41.6\text{ N/m}.

Final answer

k=41.6 N/mk = 41.6\text{ N/m}

NEXT STEPS
Final Takeaways from Your Teacher
  • Review the distinction between mass (mm) and weight (Fg=mgF_g = mg) in static equilibrium problems.

  • Perform unit checks on graph axes and slopes to verify that slope units match the target physical quantity.

  • Practice converting laboratory data tables into proper SI force units before performing linear regressions.

OverviewACEpath Teacher's Diagnosis

02 The student averages the individual ratios of each data point rather than computing the least-squares regression slope constrained through the origin.

Sample Student Work

Reviewed by ACEpath Teacher
Step-by-Step Review
Walk Through It with Your Teacher
Partially correct
  1. Step 1

    F1=(0.150)(9.80)=1.47 N,F2=(0.300)(9.80)=2.94 N,F3=(0.450)(9.80)=4.41 N,F4=(0.600)(9.80)=5.88 NF_1 = (0.150)(9.80) = 1.47\text{ N},\quad F_2 = (0.300)(9.80) = 2.94\text{ N},\quad F_3 = (0.450)(9.80) = 4.41\text{ N},\quad F_4 = (0.600)(9.80) = 5.88\text{ N}

  2. Step 2

    k1=1.470.035=42.0 N/m,k2=2.940.071=41.41 N/m,k3=4.410.106=41.60 N/m,k4=5.880.142=41.41 N/m  ⟹  k=42.0+41.41+41.60+41.414=41.6 N/mk_1 = \frac{1.47}{0.035} = 42.0\text{ N/m},\quad k_2 = \frac{2.94}{0.071} = 41.41\text{ N/m},\quad k_3 = \frac{4.41}{0.106} = 41.60\text{ N/m},\quad k_4 = \frac{5.88}{0.142} = 41.41\text{ N/m} \implies k = \frac{42.0 + 41.41 + 41.60 + 41.41}{4} = 41.6\text{ N/m}

    Correct

    k=∑ΔLiFg,i∑(ΔLi)2=1.562610.037666≈41.5 N/mk = \frac{\sum \Delta L_i F_{g,i}}{\sum (\Delta L_i)^2} = \frac{1.56261}{0.037666} \approx 41.5\text{ N/m}

    You averaged the individual ratios FiΔLi\frac{F_i}{\Delta L_i}. A line of best fit constrained through the origin requires zero-intercept linear least-squares regression, k=∑xiyi∑xi2k = \frac{\sum x_i y_i}{\sum x_i^2}, which minimizes the sum of squared residuals rather than giving disproportionate weight to points close to the origin.

  3. Step 3

    Line of best fit: Fg=41.6ΔL\text{Line of best fit: } F_g = 41.6 \Delta L

    Correct

    Fg=41.5ΔLF_g = 41.5 \Delta L

    Because your slope was obtained from the unweighted average of ratios rather than linear regression, the resulting best-fit equation is slightly affected.

WHAT YOU DID WELL
Compliments from Your Teacher

You correctly calculated the gravitational force for each suspended mass using Fg=mgF_g = mg.

You correctly related the equilibrium forces using Hooke's law Fg=kΔLF_g = k \Delta L.

You correctly carried out unit conversions and kept appropriate significant figures in your intermediate calculations.

THE ERROR
Where Your ACEpath Teacher Spotted the Mistake
Averaging Ratios Instead of Linear Regression

You computed individual slopes ki=FiΔLik_i = \frac{F_i}{\Delta L_i} and averaged them instead of applying the least-squares regression slope formula for a line through the origin.

WHY IT HAPPENED
ACEpath Teacher's Diagnosis

Averaging individual ratios yixi\frac{y_i}{x_i} treats every data point as an independent slope estimate with equal weight. In experimental physics, data points near the origin have smaller absolute values, meaning measurement uncertainties produce much larger relative errors that artificially skew the average. A true line of best fit minimizes the sum of squared vertical residuals ∑(yi−mxi)2\sum (y_i - m x_i)^2, which yields the formula m=∑xiyi∑xi2m = \frac{\sum x_i y_i}{\sum x_i^2}.

REASONING PATH
Your ACEpath teacher’s suggested approach
Zero-Intercept Best-Fit Slope
  • For a linear model y=mxy = m x constrained through the origin (0,0)(0,0), the least-squares slope is m=∑xiyi∑xi2m = \frac{\sum x_i y_i}{\sum x_i^2}, not 1n∑yixi\frac{1}{n}\sum \frac{y_i}{x_i}.

  • Sum the products xiyix_i y_i and the squares xi2x_i^2, then divide ∑xiyi\sum x_i y_i by ∑xi2\sum x_i^2.

CORRECTED PATH
ACEpath Teacher's Demonstration
  1. Compute the cross-products: ∑ΔLiFg,i=(0.035)(1.47)+(0.071)(2.94)+(0.106)(4.41)+(0.142)(5.88)=0.05145+0.20874+0.46746+0.83496=1.56261 N⋅m\sum \Delta L_i F_{g,i} = (0.035)(1.47) + (0.071)(2.94) + (0.106)(4.41) + (0.142)(5.88) = 0.05145 + 0.20874 + 0.46746 + 0.83496 = 1.56261\text{ N}\cdot\text{m}.

  2. Compute the sum of squared inputs: ∑(ΔLi)2=0.0352+0.0712+0.1062+0.1422=0.001225+0.005041+0.011236+0.020164=0.037666 m2\sum (\Delta L_i)^2 = 0.035^2 + 0.071^2 + 0.106^2 + 0.142^2 = 0.001225 + 0.005041 + 0.011236 + 0.020164 = 0.037666\text{ m}^2.

  3. Evaluate the least-squares slope: k=∑ΔLiFg,i∑(ΔLi)2=1.562610.037666≈41.486 N/m≈41.5 N/mk = \frac{\sum \Delta L_i F_{g,i}}{\sum (\Delta L_i)^2} = \frac{1.56261}{0.037666} \approx 41.486\text{ N/m} \approx 41.5\text{ N/m}.

Final answer

k=41.5 N/mk = 41.5\text{ N/m}, with best-fit equation Fg=41.5ΔLF_g = 41.5 \Delta L

NEXT STEPS
Final Takeaways from Your Teacher
  • When asked for a line of best fit through the origin, always use m=∑xiyi∑xi2m = \frac{\sum x_i y_i}{\sum x_i^2} instead of averaging individual point ratios.

  • Practice setting up a quick two-column table for xiyix_i y_i and xi2x_i^2 to streamline regression calculations.

OverviewACEpath Teacher's Diagnosis

03 The student inverts the slope definition by dividing elongation by force instead of force by elongation, calculating the compliance rather than the spring constant.

Sample Student Work

Reviewed by ACEpath Teacher
Step-by-Step Review
Walk Through It with Your Teacher
Incorrect
  1. Step 1

    Fg:1.47 N,  2.94 N,  4.41 N,  5.88 NF_g: 1.47\text{ N},\; 2.94\text{ N},\; 4.41\text{ N},\; 5.88\text{ N}

  2. Step 2

    ∑(ΔLiFg,i)=1.56261 N⋅m\sum (\Delta L_i F_{g,i}) = 1.56261\text{ N}\cdot\text{m}

  3. Step 3

    ∑(Fg,i2)=1.472+2.942+4.412+5.882=64.827 N2  ⟹  k=∑(Fg,i2)∑(ΔLiFg,i)=64.8271.56261=41.5 N/m\sum (F_{g,i}^2) = 1.47^2 + 2.94^2 + 4.41^2 + 5.88^2 = 64.827\text{ N}^2 \implies k = \frac{\sum (F_{g,i}^2)}{\sum (\Delta L_i F_{g,i})} = \frac{64.827}{1.56261} = 41.5\text{ N/m}

    Correct

    ∑(ΔLi)2=0.0352+0.0712+0.1062+0.1422≈0.03767 m2  ⟹  k=∑(ΔLiFg,i)∑(ΔLi)2≈41.5 N/m\sum (\Delta L_i)^2 = 0.035^2 + 0.071^2 + 0.106^2 + 0.142^2 \approx 0.03767\text{ m}^2 \implies k = \frac{\sum (\Delta L_i F_{g,i})}{\sum (\Delta L_i)^2} \approx 41.5\text{ N/m} (or averaging individual slopes ki=Fg,iΔLi  ⟹  k≈41.6 N/mk_i = \frac{F_{g,i}}{\Delta L_i} \implies k \approx 41.6\text{ N/m})

    When fitting FgF_g on the vertical axis versus ΔL\Delta L on the horizontal axis (Fg=kΔLF_g = k\Delta L), the least-squares slope through the origin has denominator ∑(ΔLi)2\sum (\Delta L_i)^2, not ∑(Fg,i2)\sum (F_{g,i}^2).

  4. Step 4

    Line of best fit: \text{Line of best fit: } F_g = (0.0241 N/m\text{ N/m})Δ\Delta L  with \text{ with } k = 0.0241 N/m\text{ N/m}

    Correct

    Line of best fit: \text{Line of best fit: } F_g = (41.6 N/m\text{ N/m})Δ\Delta L  with \text{ with } k = 41.6 N/m\text{ N/m}

    The value 0.02410.0241 represents the compliance ΔLFg\frac{\Delta L}{F_g} in units of m/N\text{m/N}, which is the reciprocal of the spring constant 1k\frac{1}{k}, rather than kk itself.

WHAT YOU DID WELL
Compliments from Your Teacher

You correctly calculated the gravitational force Fg=mgF_g = mg for all four masses.

You accurately calculated the cross-product sum ∑(ΔLiFg,i)=1.56261 N⋅m\sum (\Delta L_i F_{g,i}) = 1.56261\text{ N}\cdot\text{m}.

THE ERROR
Where Your ACEpath Teacher Spotted the Mistake
Inverted Slope / Compliance Misidentification

You recognized that 41.5 N/m41.5\text{ N/m} corresponds to the inverse ratio, but you ultimately selected the reciprocal value 0.02410.0241 as your final spring constant kk.

WHY IT HAPPENED
ACEpath Teacher's Diagnosis

You confused the dependent and independent variables during linear regression, calculating compliance ΔLFg=1k\frac{\Delta L}{F_g} = \frac{1}{k} instead of the spring constant k=FgΔLk = \frac{F_g}{\Delta L}.

REASONING PATH
Your ACEpath teacher’s suggested approach
Variable Orientation
  • For a plot of yy versus xx modeled by y=mxy = mx, the slope is m=ΔyΔxm = \frac{\Delta y}{\Delta x}.

  • Always identify the dependent variable on the vertical axis (FgF_g) and divide by the horizontal variable (ΔL\Delta L).

Unit Dimensionality Check
  • Spring constant kk has units of N/m\text{N/m}, while compliance 1k\frac{1}{k} has units of m/N\text{m/N}.

  • Check that your slope calculation yields Nm\frac{\text{N}}{\text{m}}: dividing elongation (meters) by force (newtons) yields m/N\text{m/N}, signaling an inverted slope.

CORRECTED PATH
ACEpath Teacher's Demonstration
  1. Set up Hooke's law with weight as the vertical variable: Fg=kΔLF_g = k \Delta L.

  2. Compute the slope directly by averaging individual trial ratios: k1=1.470.035=42.00 N/mk_1 = \frac{1.47}{0.035} = 42.00\text{ N/m}, k2=2.940.071≈41.41 N/mk_2 = \frac{2.94}{0.071} \approx 41.41\text{ N/m}, k3=4.410.106≈41.60 N/mk_3 = \frac{4.41}{0.106} \approx 41.60\text{ N/m}, and k4=5.880.142≈41.41 N/mk_4 = \frac{5.88}{0.142} \approx 41.41\text{ N/m}.

  3. Average the trial slopes: k=42.00+41.41+41.60+41.414=41.6 N/mk = \frac{42.00 + 41.41 + 41.60 + 41.41}{4} = 41.6\text{ N/m} (or using zero-intercept linear regression k=∑ΔLiFg,i∑(ΔLi)2=1.562610.03767≈41.5 N/mk = \frac{\sum \Delta L_i F_{g,i}}{\sum (\Delta L_i)^2} = \frac{1.56261}{0.03767} \approx 41.5\text{ N/m}).

Final answer

k = 41.6 N/m\text{ N/m}

NEXT STEPS
Final Takeaways from Your Teacher
  • Practice checking physical units at every regression step to ensure the slope dimensions match the target quantity.

  • Solve problems where you alternate between graphing FF versus ΔL\Delta L (slope = kk) and ΔL\Delta L versus FF (slope = 1/k1/k).

Lock it in

Similar question

01

A student measures the stretch of a vertical spring under three hanging masses: (0.100 kg,0.020 m)(0.100\text{ kg}, 0.020\text{ m}), (0.200 kg,0.040 m)(0.200\text{ kg}, 0.040\text{ m}), and (0.300 kg,0.060 m)(0.300\text{ kg}, 0.060\text{ m}). Taking g=9.80 m/s2g = 9.80\text{ m/s}^2, find the spring constant kk in N/m\text{N/m}.

Answer

k=49.0 N/mk = 49.0\text{ N/m}. Convert each mass to weight F=mgF = mg: 0.98 N0.98\text{ N}, 1.96 N1.96\text{ N}, 2.94 N2.94\text{ N}. The slope k=FΔL=0.98 N0.020 m=49.0 N/mk = \frac{F}{\Delta L} = \frac{0.98\text{ N}}{0.020\text{ m}} = 49.0\text{ N/m}.

02

A linear regression of hanging mass mm (in kg\text{kg}) versus spring stretch Δx\Delta x (in m\text{m}) yields the best-fit line m=5.40Δxm = 5.40 \Delta x. Assuming g=9.80 m/s2g = 9.80\text{ m/s}^2, calculate the experimental spring constant kk in N/m\text{N/m} and explain the required conversion.

Answer

k=52.9 N/mk = 52.9\text{ N/m}. Since F=mg=kΔxF = mg = k \Delta x, the mass-versus-stretch slope is slope=mΔx=kg=5.40 kg/m\text{slope} = \frac{m}{\Delta x} = \frac{k}{g} = 5.40\text{ kg/m}. Multiplying by gg yields k=(5.40 kg/m)(9.80 m/s2)=52.92≈52.9 N/mk = (5.40\text{ kg/m})(9.80\text{ m/s}^2) = 52.92 \approx 52.9\text{ N/m}.

03

In an experiment on the surface of the Moon (gmoon=1.62 m/s2g_{\text{moon}} = 1.62\text{ m/s}^2), a spring with spring constant k=25.0 N/mk = 25.0\text{ N/m} is loaded with masses of 0.500 kg0.500\text{ kg}, 1.000 kg1.000\text{ kg}, and 1.500 kg1.500\text{ kg}. If a student erroneously plots mm (in kg\text{kg}) versus elongation ΔL\Delta L (in m\text{m}) and claims the slope is the spring constant, what value of 'spring constant' would they report, and what is its percentage error relative to the true kk?

Answer

Reported value: 15.4 kg/m15.4\text{ kg/m}; Percentage error: −38.4%-38.4\%. The measured slope is mΔL=kgmoon=25.01.62≈15.43 kg/m\frac{m}{\Delta L} = \frac{k}{g_{\text{moon}}} = \frac{25.0}{1.62} \approx 15.43\text{ kg/m}. If misinterpreted as k=15.4 N/mk = 15.4\text{ N/m}, the error is 15.43−25.025.0×100%≈−38.3%\frac{15.43 - 25.0}{25.0} \times 100\% \approx -38.3\% (or −38.4%-38.4\% using rounded values).

Loading workspace…