Resources

A soccer player kicks a ball from level ground into projectile motion across a field. A motion-capture system detects that at the projectile's apex, the ball travels with a purely horizontal velocity of vx=18.2 m/sv_x = 18.2\text{ m/s}. The total measured flight time from kickoff until the ball returns to ground level is tflight=2.60 st_{\text{flight}} = 2.60\text{ s}. Assuming negligible air resistance and g=9.80 m/s2g = 9.80\text{ m/s}^2, reconstruct the initial launch state: determine the initial vertical velocity component v0yv_{0y}, the initial launch speed v0v_0, and the launch angle θ\theta above the horizontal.

Answer and steps

Final answer

v0y=12.7 m/sv_{0y} = 12.7\text{ m/s}, v0=22.2 m/sv_0 = 22.2\text{ m/s}, θ=35.0∘\theta = 35.0^\circ

Steps

01

Identify Horizontal and Vertical Independence

In ideal projectile motion, horizontal and vertical motions are completely independent:

  • The horizontal acceleration is zero (ax=0a_x = 0), meaning the horizontal velocity remains constant throughout the flight: v0x=vx=18.2 m/sv_{0x} = v_x = 18.2\text{ m/s}
  • The vertical acceleration is due to gravity directed downward (ay=−g=−9.80 m/s2a_y = -g = -9.80\text{ m/s}^2).

02

Determine the Initial Vertical Velocity (v0yv_{0y})

Because the launch and landing occur on level ground, the flight is vertically symmetric. The time to reach the apex is half the total flight time: tapex=tflight2=2.60 s2=1.30 st_{\text{apex}} = \frac{t_{\text{flight}}}{2} = \frac{2.60\text{ s}}{2} = 1.30\text{ s}

At the apex, the vertical velocity is momentarily zero (vy=0v_y = 0). Using the kinematic equation vy=v0y−gtv_y = v_{0y} - g t: 0=v0y−gtapex0 = v_{0y} - g t_{\text{apex}} v0y=g⋅tapex=9.80 m/s2×1.30 s=12.74 m/s≈12.7 m/sv_{0y} = g \cdot t_{\text{apex}} = 9.80\text{ m/s}^2 \times 1.30\text{ s} = 12.74\text{ m/s} \approx 12.7\text{ m/s}

(Pitfall to avoid: Be careful not to use the full flight time tflight=2.60 st_{\text{flight}} = 2.60\text{ s} directly in v0y=gtv_{0y} = g t; the velocity reaches zero at the peak, which occurs at tflight/2t_{\text{flight}} / 2.)


03

Calculate the Initial Launch Speed (v0v_0)

The overall initial speed is the vector magnitude of the horizontal and vertical velocity components, found using the Pythagorean theorem: v0=v0x2+v0y2v_0 = \sqrt{v_{0x}^2 + v_{0y}^2} v0=(18.2 m/s)2+(12.74 m/s)2=331.24+162.31=493.55≈22.2 m/sv_0 = \sqrt{(18.2\text{ m/s})^2 + (12.74\text{ m/s})^2} = \sqrt{331.24 + 162.31} = \sqrt{493.55} \approx 22.2\text{ m/s}


04

Calculate the Launch Angle (θ\theta)

The launch angle θ\theta relative to the horizontal is given by the tangent ratio: tan⁡θ=v0yv0x\tan\theta = \frac{v_{0y}}{v_{0x}} θ=arctan⁡(12.74 m/s18.2 m/s)=arctan⁡(0.700)≈35.0∘\theta = \arctan\left(\frac{12.74\text{ m/s}}{18.2\text{ m/s}}\right) = \arctan(0.700) \approx 35.0^\circ

Typical errors

OverviewACEpath Teacher's Diagnosis

01 The student uses the total flight time instead of the half-time to apex in the kinematic equation v_y = v_0y - g*t, doubling the initial vertical velocity.

Sample Student Work

Reviewed by ACEpath Teacher
Step-by-Step Review
Walk Through It with Your Teacher
Incorrect
  1. Step 1

    vy=v0y−g⋅t=0  ⟹  v0y=g⋅tflight=9.80×2.60=25.48 m/sv_y = v_{0y} - g \cdot t = 0 \implies v_{0y} = g \cdot t_{\text{flight}} = 9.80 \times 2.60 = 25.48\text{ m/s}

    Correct

    tapex=tflight2=1.30 s  ⟹  v0y=g⋅tapex=9.80×1.30=12.74 m/s≈12.7 m/st_{\text{apex}} = \frac{t_{\text{flight}}}{2} = 1.30\text{ s} \implies v_{0y} = g \cdot t_{\text{apex}} = 9.80 \times 1.30 = 12.74\text{ m/s} \approx 12.7\text{ m/s}

    At the apex, the vertical velocity is zero (vy=0v_y = 0), but this occurs halfway through the symmetric flight at t=tflight2=1.30 st = \frac{t_{\text{flight}}}{2} = 1.30\text{ s}, not at the total flight time tflight=2.60 st_{\text{flight}} = 2.60\text{ s}.

  2. Step 2

    v0x=18.2 m/s  ⟹  v0=18.22+25.482=331.24+649.23=980.47≈31.3 m/sv_{0x} = 18.2\text{ m/s} \implies v_0 = \sqrt{18.2^2 + 25.48^2} = \sqrt{331.24 + 649.23} = \sqrt{980.47} \approx 31.3\text{ m/s}

    Correct

    v0=v0x2+v0y2=18.22+12.742≈22.2 m/sv_0 = \sqrt{v_{0x}^2 + v_{0y}^2} = \sqrt{18.2^2 + 12.74^2} \approx 22.2\text{ m/s}

    Your vector magnitude formula is completely correct, but the result is affected by your earlier doubled value for v0yv_{0y}.

  3. Step 3

    tan⁡(θ)=v0yv0x=25.4818.2≈1.40  ⟹  θ=arctan⁡(1.40)≈54.5∘\tan(\theta) = \frac{v_{0y}}{v_{0x}} = \frac{25.48}{18.2} \approx 1.40 \implies \theta = \arctan(1.40) \approx 54.5^\circ

    Correct

    θ=arctan⁡(v0yv0x)=arctan⁡(12.7418.2)≈35.0∘\theta = \arctan\left(\frac{v_{0y}}{v_{0x}}\right) = \arctan\left(\frac{12.74}{18.2}\right) \approx 35.0^\circ

    You correctly set up the tangent ratio for the launch angle, but the angle is shifted steeper because of the inflated vertical velocity.

WHAT YOU DID WELL
Compliments from Your Teacher

You correctly recognized that the horizontal velocity remains constant throughout the trajectory.

You used the Pythagorean theorem correctly to find the magnitude of the launch velocity.

You set up the trigonometric tangent ratio correctly to determine the launch angle.

THE ERROR
Where Your ACEpath Teacher Spotted the Mistake
Flight Time vs. Apex Time Mismatch

You substituted the full flight time tflight=2.60 st_{\text{flight}} = 2.60\text{ s} into vy=v0y−gt=0v_y = v_{0y} - gt = 0 instead of the apex time.

WHY IT HAPPENED
ACEpath Teacher's Diagnosis

Conflating the moment of zero vertical velocity (vy=0v_y = 0 at the peak) with the total duration of the flight (tflightt_{\text{flight}} when y=0y = 0). Setting vy=0v_y = 0 applies only at the apex, which for level-ground projectile motion occurs at tapex=tflight2t_{\text{apex}} = \frac{t_{\text{flight}}}{2}.

REASONING PATH
Your ACEpath teacher’s suggested approach
Match Kinematic Condition to Timestamp
  • In symmetric projectile motion over level ground, vy=0v_y = 0 occurs at t=tflight2t = \frac{t_{\text{flight}}}{2}, while y=0y = 0 (landing) occurs at t=tflightt = t_{\text{flight}} where vy=−v0yv_y = -v_{0y}.

  • Before substituting tt into vy=v0y−gtv_y = v_{0y} - gt, explicitly state whether the equation describes the apex (vy=0,t=tapexv_y = 0, t = t_{\text{apex}}) or the full flight (vy=−v0y,t=tflightv_y = -v_{0y}, t = t_{\text{flight}}).

CORRECTED PATH
ACEpath Teacher's Demonstration
  1. tapex=tflight2=2.60 s2=1.30 st_{\text{apex}} = \frac{t_{\text{flight}}}{2} = \frac{2.60\text{ s}}{2} = 1.30\text{ s}

  2. v0y=g⋅tapex=9.80 m/s2×1.30 s=12.74 m/s≈12.7 m/sv_{0y} = g \cdot t_{\text{apex}} = 9.80\text{ m/s}^2 \times 1.30\text{ s} = 12.74\text{ m/s} \approx 12.7\text{ m/s}

  3. v0=(18.2 m/s)2+(12.74 m/s)2=331.24+162.31≈22.2 m/sv_0 = \sqrt{(18.2\text{ m/s})^2 + (12.74\text{ m/s})^2} = \sqrt{331.24 + 162.31} \approx 22.2\text{ m/s}

  4. θ=arctan⁡(12.74 m/s18.2 m/s)≈35.0∘\theta = \arctan\left(\frac{12.74\text{ m/s}}{18.2\text{ m/s}}\right) \approx 35.0^\circ

Final answer

v0y=12.7 m/sv_{0y} = 12.7\text{ m/s}, v0=22.2 m/sv_0 = 22.2\text{ m/s}, θ=35.0∘\theta = 35.0^\circ

NEXT STEPS
Final Takeaways from Your Teacher
  • Always pair the condition vy=0v_y = 0 with tapex=12tflightt_{\text{apex}} = \frac{1}{2}t_{\text{flight}} on level-ground trajectories.

  • Alternatively, use the full flight time with the displacement equation y=v0yt−12gt2=0y = v_{0y}t - \frac{1}{2}gt^2 = 0 or the velocity relation vy,final=−v0yv_{y,\text{final}} = -v_{0y} to avoid dividing the time.

OverviewACEpath Teacher's Diagnosis

02 The student inverts the ratio of velocity components in the tangent formula when calculating the launch angle, computing arctan(v_0x / v_0y) instead of arctan(v_0y / v_0x).

Sample Student Work

Reviewed by ACEpath Teacher
Step-by-Step Review
Walk Through It with Your Teacher
Partially correct
  1. Step 1

    tapex=2.602=1.30 s  ⟹  v0y=9.80×1.30=12.74 m/st_{\text{apex}} = \frac{2.60}{2} = 1.30\text{ s} \implies v_{0y} = 9.80 \times 1.30 = 12.74\text{ m/s}

  2. Step 2

    v0x=18.2 m/s  ⟹  v0=18.22+12.742=331.24+162.31≈22.2 m/sv_{0x} = 18.2\text{ m/s} \implies v_0 = \sqrt{18.2^2 + 12.74^2} = \sqrt{331.24 + 162.31} \approx 22.2\text{ m/s}

  3. Step 3

    tan⁡(θ)=v0xv0y=18.212.74≈1.429  ⟹  θ=arctan⁡(1.429)≈55.0∘\tan(\theta) = \frac{v_{0x}}{v_{0y}} = \frac{18.2}{12.74} \approx 1.429 \implies \theta = \arctan(1.429) \approx 55.0^\circ

    Correct

    tan⁡θ=v0yv0x=12.7418.2≈0.700  ⟹  θ=arctan⁡(0.700)≈35.0∘\tan\theta = \frac{v_{0y}}{v_{0x}} = \frac{12.74}{18.2} \approx 0.700 \implies \theta = \arctan(0.700) \approx 35.0^\circ

    You inverted the tangent ratio. Because the launch angle θ\theta is measured relative to the horizontal ground, the vertical component v0yv_{0y} is opposite the angle and the horizontal component v0xv_{0x} is adjacent, giving tan⁡θ=v0yv0x\tan\theta = \frac{v_{0y}}{v_{0x}}.

WHAT YOU DID WELL
Compliments from Your Teacher

You used the parabolic flight symmetry to find the peak time tapex=1.30 st_{\text{apex}} = 1.30\text{ s}.

You correctly calculated the initial vertical velocity component using v0y=gtapexv_{0y} = g t_{\text{apex}}.

You identified that horizontal velocity is constant and accurately computed the initial speed v0v_0 via vector addition.

THE ERROR
Where Your ACEpath Teacher Spotted the Mistake
Trigonometric Ratio Inversion

no

WHY IT HAPPENED
ACEpath Teacher's Diagnosis

You swapped the opposite and adjacent legs of the velocity vector triangle when defining the launch angle above the horizontal.

REASONING PATH
Your ACEpath teacher’s suggested approach
Angle Reference Axis
  • For an angle θ\theta measured above the horizontal, the horizontal velocity component vxv_x lies along the adjacent side and the vertical component vyv_y lies along the opposite side.

  • Sketch the right triangle formed by v⃗0\vec{v}_0: draw v0xv_{0x} horizontally, v0yv_{0y} vertically upward from its tip, and verify tan⁡θ=oppositeadjacent=v0yv0x\tan\theta = \frac{\text{opposite}}{\text{adjacent}} = \frac{v_{0y}}{v_{0x}}.

CORRECTED PATH
ACEpath Teacher's Demonstration
  1. tan⁡θ=12.74 m/s18.2 m/s≈0.700\tan\theta = \frac{12.74\text{ m/s}}{18.2\text{ m/s}} \approx 0.700

  2. θ=arctan⁡(0.700)≈35.0∘\theta = \arctan(0.700) \approx 35.0^\circ

Final answer

v0y=12.7 m/sv_{0y} = 12.7\text{ m/s}, v0=22.2 m/sv_0 = 22.2\text{ m/s}, θ=35.0∘\theta = 35.0^\circ

NEXT STEPS
Final Takeaways from Your Teacher
  • Always sketch the component triangle before setting up trigonometric ratios to visually confirm which leg is opposite the reference angle.

  • Perform a sanity check: since v0x=18.2 m/s>v0y=12.7 m/sv_{0x} = 18.2\text{ m/s} > v_{0y} = 12.7\text{ m/s}, the trajectory is flatter than 45∘45^\circ, so θ\theta must be strictly less than 45∘45^\circ.

OverviewACEpath Teacher's Diagnosis

03 The student incorrectly adds the component velocities directly to find the launch speed instead of using vector addition via the Pythagorean theorem.

Sample Student Work

Reviewed by ACEpath Teacher
Step-by-Step Review
Walk Through It with Your Teacher
Partially correct
  1. Step 1

    tapex=2.602=1.30 s  ⟹  v0y=9.80×1.30=12.74 m/st_{\text{apex}} = \frac{2.60}{2} = 1.30\text{ s} \implies v_{0y} = 9.80 \times 1.30 = 12.74\text{ m/s}

  2. Step 2

    v0x=18.2 m/s  ⟹  v0=v0x+v0y=18.2+12.74=30.94 m/sv_{0x} = 18.2\text{ m/s} \implies v_0 = v_{0x} + v_{0y} = 18.2 + 12.74 = 30.94\text{ m/s}

    Correct

    v0=v0x2+v0y2=18.22+12.742≈22.2 m/sv_0 = \sqrt{v_{0x}^2 + v_{0y}^2} = \sqrt{18.2^2 + 12.74^2} \approx 22.2\text{ m/s}

    Horizontal and vertical velocities are perpendicular vector components. Their resultant magnitude is found using the Pythagorean theorem, not simple scalar addition.

  3. Step 3

    tan⁡(θ)=12.7418.2≈0.700  ⟹  θ=arctan⁡(0.700)≈35.0∘\tan(\theta) = \frac{12.74}{18.2} \approx 0.700 \implies \theta = \arctan(0.700) \approx 35.0^\circ

WHAT YOU DID WELL
Compliments from Your Teacher

You correctly exploited vertical trajectory symmetry to find tapex=1.30 st_{\text{apex}} = 1.30\text{ s}.

You accurately calculated the initial vertical velocity component v0y=12.74 m/sv_{0y} = 12.74\text{ m/s}.

You applied the correct tangent relationship to determine the launch angle θ=35.0∘\theta = 35.0^\circ.

THE ERROR
Where Your ACEpath Teacher Spotted the Mistake
Scalar addition of perpendicular vector components

You wrote v0=v0x+v0yv_0 = v_{0x} + v_{0y} as a simple sum instead of finding the magnitude of the velocity vector.

WHY IT HAPPENED
ACEpath Teacher's Diagnosis

Treating orthogonal vector components as ordinary scalar quantities rather than sides of a right triangle whose hypotenuse represents the total speed.

REASONING PATH
Your ACEpath teacher’s suggested approach
Vector Magnitude Rule
  • For mutually perpendicular vector components vxv_x and vyv_y, the magnitude is v=vx2+vy2v = \sqrt{v_x^2 + v_y^2}.

  • Whenever combining horizontal and vertical velocity components, draw a right-angle velocity triangle and apply the Pythagorean theorem.

Scalar vs. Vector Summation Check
  • The magnitude of a vector sum satisfies ∣A⃗+B⃗∣≤∣A⃗∣+∣B⃗∣|\vec{A} + \vec{B}| \le |\vec{A}| + |\vec{B}|, with equality holding only when both vectors point in the exact same direction.

  • Check that the calculated initial speed is less than the simple sum of its components (22.2 m/s<30.94 m/s22.2\text{ m/s} < 30.94\text{ m/s}) and strictly greater than either individual component.

CORRECTED PATH
ACEpath Teacher's Demonstration
  1. Identify that v⃗0x\vec{v}_{0x} and v⃗0y\vec{v}_{0y} are perpendicular vector components forming the legs of a right triangle.

  2. Apply the Pythagorean theorem: v0=v0x2+v0y2v_0 = \sqrt{v_{0x}^2 + v_{0y}^2}.

  3. Substitute the values: v0=(18.2 m/s)2+(12.74 m/s)2=331.24+162.31=493.55≈22.2 m/sv_0 = \sqrt{(18.2\text{ m/s})^2 + (12.74\text{ m/s})^2} = \sqrt{331.24 + 162.31} = \sqrt{493.55} \approx 22.2\text{ m/s}.

Final answer

v0y=12.7 m/sv_{0y} = 12.7\text{ m/s}, v0=22.2 m/sv_0 = 22.2\text{ m/s}, θ=35.0∘\theta = 35.0^\circ

NEXT STEPS
Final Takeaways from Your Teacher
  • Practice drawing velocity vector triangles at launch to visualize how v0xv_{0x}, v0yv_{0y}, and v0v_0 form a right triangle.

  • Review vector magnitude calculations to reinforce using v=vx2+vy2v = \sqrt{v_x^2 + v_y^2} rather than adding components algebraically.

Lock it in

Similar question

01

A tennis ball is hit from ground level and stays in the air for 1.80 s1.80\text{ s} before landing on level ground. At its highest point, its speed is measured to be 14.0 m/s14.0\text{ m/s}. Assuming g=9.80 m/s2g = 9.80\text{ m/s}^2, find its initial vertical velocity v0yv_{0y} and initial launch speed v0v_0.

Answer

Key steps:

  1. tapex=1.80 s2=0.90 st_{\text{apex}} = \frac{1.80\text{ s}}{2} = 0.90\text{ s}.
  2. v0y=g⋅tapex=9.80×0.90=8.82 m/sv_{0y} = g \cdot t_{\text{apex}} = 9.80 \times 0.90 = 8.82\text{ m/s}.
  3. Horizontal speed is constant: v0x=14.0 m/sv_{0x} = 14.0\text{ m/s}.
  4. v0=14.02+8.822=196+77.79≈16.5 m/sv_0 = \sqrt{14.0^2 + 8.82^2} = \sqrt{196 + 77.79} \approx 16.5\text{ m/s}.

Result: v0y=8.82 m/sv_{0y} = 8.82\text{ m/s}, v0=16.5 m/sv_0 = 16.5\text{ m/s}.

02

An arrow is shot across a level field. It lands 3.20 s3.20\text{ s} later at a horizontal distance of 80.0 m80.0\text{ m}. Using g=9.80 m/s2g = 9.80\text{ m/s}^2, determine the initial launch angle θ\theta above the horizontal.

Answer

Key steps:

  1. Horizontal velocity: v0x=Δxtflight=80.0 m3.20 s=25.0 m/sv_{0x} = \frac{\Delta x}{t_{\text{flight}}} = \frac{80.0\text{ m}}{3.20\text{ s}} = 25.0\text{ m/s}.
  2. Apex time: tapex=3.20 s2=1.60 st_{\text{apex}} = \frac{3.20\text{ s}}{2} = 1.60\text{ s}.
  3. Initial vertical velocity: v0y=g⋅tapex=9.80×1.60=15.68 m/sv_{0y} = g \cdot t_{\text{apex}} = 9.80 \times 1.60 = 15.68\text{ m/s}.
  4. Launch angle: θ=arctan⁡(15.6825.0)≈32.1∘\theta = \arctan\left(\frac{15.68}{25.0}\right) \approx 32.1^\circ.

Result: θ=32.1∘\theta = 32.1^\circ.

03

A toy rocket is launched with an initial velocity of v0=25.0 m/sv_0 = 25.0\text{ m/s} at an angle of θ=53.0∘\theta = 53.0^\circ above the horizontal from the edge of a flat cliff of height h=20.0 mh = 20.0\text{ m}. Using g=9.80 m/s2g = 9.80\text{ m/s}^2, find: (a) the time tapext_{\text{apex}} to reach maximum height, and (b) explain why tapex≠12ttotalt_{\text{apex}} \neq \frac{1}{2}t_{\text{total}} in this asymmetric case.

Answer

Key steps:

  1. Vertical launch component: v0y=25.0sin⁡(53.0∘)≈20.0 m/sv_{0y} = 25.0 \sin(53.0^\circ) \approx 20.0\text{ m/s}.
  2. At the apex, vy=0  ⟹  tapex=v0yg=20.09.80≈2.04 sv_y = 0 \implies t_{\text{apex}} = \frac{v_{0y}}{g} = \frac{20.0}{9.80} \approx 2.04\text{ s}.
  3. In asymmetric motion (landing below launch elevation), the projectile must travel further downward past the launch level to reach the ground, so the descent time tdescent>tascentt_{\text{descent}} > t_{\text{ascent}}, making ttotal>2tapext_{\text{total}} > 2 t_{\text{apex}}.

Result: (a) tapex≈2.04 st_{\text{apex}} \approx 2.04\text{ s}; (b) Trajectory is vertically asymmetric because launch and landing heights differ.

Loading workspace…