Resources

A tiny test mass is projected vertically upward from ground level on an airless planetary body with an initial speed of v0=12.0 m/sv_0 = 12.0\text{ m/s}. A specialized optical tracking window of infinitesimal vertical aperture width Δy\Delta y is positioned at a vertical height ywy_w directly along the path. As the observation point approaches the absolute theoretical maximum apex Hmax⁡=v022gH_{\max} = \frac{v_0^2}{2g} such that the remaining distance to the summit ϵ=Hmax⁡−yw→0+\epsilon = H_{\max} - y_w \to 0^+, derive the limiting ratio of the transit time through the upward window segment Δt\Delta t to Δy\Delta y in terms of local gravity g=3.60 m/s2g = 3.60\text{ m/s}^2 and ϵ\epsilon. For a near-apex proximity of ϵ=0.0400 m\epsilon = 0.0400\text{ m}, calculate the projectile's instantaneous upward velocity v(ϵ)v(\epsilon) and evaluate lim⁡Δy→0ΔtΔy\lim_{\Delta y \to 0} \frac{\Delta t}{\Delta y}.

Answer and steps

Final answer

v(ϵ)=0.537 m/sv(\epsilon) = 0.537\text{ m/s}; lim⁡Δy→0ΔtΔy=12gϵ=1.86 s/m\lim_{\Delta y \to 0} \frac{\Delta t}{\Delta y} = \frac{1}{\sqrt{2g\epsilon}} = 1.86\text{ s/m}

Steps

01

Relate Instantaneous Velocity to the Distance from the Apex

For vertical projectile motion under constant downward gravitational acceleration gg with no air resistance, the kinematic relation between vertical velocity vv and position yy is: v2=v02−2gyv^2 = v_0^2 - 2gy

At the theoretical maximum height (apex) Hmax⁡H_{\max}, the vertical velocity is zero: 0=v02−2gHmax⁡  ⟹  Hmax⁡=v022g0 = v_0^2 - 2gH_{\max} \implies H_{\max} = \frac{v_0^2}{2g}

Let the tracking window be positioned at height yw=Hmax⁡−ϵy_w = H_{\max} - \epsilon, where ϵ\epsilon is the remaining vertical distance to the apex. Substituting ywy_w into the kinematic equation gives: v2=v02−2g(Hmax⁡−ϵ)=(v02−2gHmax⁡)+2gϵv^2 = v_0^2 - 2g(H_{\max} - \epsilon) = (v_0^2 - 2gH_{\max}) + 2g\epsilon

Since v02−2gHmax⁡=0v_0^2 - 2gH_{\max} = 0, the upward velocity at this point depends purely on local gravity and the distance ϵ\epsilon from the apex: v(ϵ)=2gϵv(\epsilon) = \sqrt{2g\epsilon}


02

Derive the Limiting Ratio lim⁡Δy→0ΔtΔy\lim_{\Delta y \to 0} \frac{\Delta t}{\Delta y}

By the definition of instantaneous velocity, the rate of change of position with respect to time is: v=dydt=lim⁡Δt→0ΔyΔtv = \frac{dy}{dt} = \lim_{\Delta t \to 0} \frac{\Delta y}{\Delta t}

The transit time per unit vertical displacement across an infinitesimal aperture Δy\Delta y is the reciprocal of the instantaneous velocity: lim⁡Δy→0ΔtΔy=dtdy=1v(ϵ)\lim_{\Delta y \to 0} \frac{\Delta t}{\Delta y} = \frac{dt}{dy} = \frac{1}{v(\epsilon)}

Substituting v(ϵ)=2gϵv(\epsilon) = \sqrt{2g\epsilon}: lim⁡Δy→0ΔtΔy=12gϵ\lim_{\Delta y \to 0} \frac{\Delta t}{\Delta y} = \frac{1}{\sqrt{2g\epsilon}}

Common Pitfall: As the projectile nears the apex, its speed decreases towards zero, causing the transit time per unit distance to diverge (dtdy→∞\frac{dt}{dy} \to \infty as ϵ→0\epsilon \to 0). Do not confuse average speed over a finite interval with the reciprocal of instantaneous velocity dtdy\frac{dt}{dy}.


03

Numerical Evaluation for ϵ=0.0400 m\epsilon = 0.0400\text{ m}

Given:

  • g=3.60 m/s2g = 3.60\text{ m/s}^2
  • ϵ=0.0400 m\epsilon = 0.0400\text{ m}

Calculate the upward velocity v(ϵ)v(\epsilon): v(ϵ)=2⋅3.60 m/s2⋅0.0400 m=0.288 m/s≈0.537 m/sv(\epsilon) = \sqrt{2 \cdot 3.60\text{ m/s}^2 \cdot 0.0400\text{ m}} = \sqrt{0.288}\text{ m/s} \approx 0.537\text{ m/s}

Calculate the limiting ratio lim⁡Δy→0ΔtΔy\lim_{\Delta y \to 0} \frac{\Delta t}{\Delta y}: lim⁡Δy→0ΔtΔy=1v(ϵ)=10.288≈1.86 s/m\lim_{\Delta y \to 0} \frac{\Delta t}{\Delta y} = \frac{1}{v(\epsilon)} = \frac{1}{\sqrt{0.288}} \approx 1.86\text{ s/m}

Typical errors

OverviewACEpath Teacher's Diagnosis

01 The student confuses the instantaneous speed with the average speed or omits the factor of 2 in Torricelli's formula, writing v = √(gε) instead of √(2gε).

Sample Student Work

Reviewed by ACEpath Teacher
Step-by-Step Review
Walk Through It with Your Teacher
Incorrect
  1. Step 1

    v2=gϵ  ⟹  v=gϵv^2 = g\epsilon \implies v = \sqrt{g\epsilon}

    Correct

    v2=2gϵ  ⟹  v=2gϵv^2 = 2g\epsilon \implies v = \sqrt{2g\epsilon}

    From Torricelli's kinematic equation with zero velocity at the apex (02−v2=−2gϵ0^2 - v^2 = -2g\epsilon), the speed at a distance ϵ\epsilon below the apex is v=2gϵv = \sqrt{2g\epsilon}, which includes a factor of 22.

  2. Step 2

    lim⁡Δy→0ΔtΔy=1v=1gϵ\lim_{\Delta y \to 0} \frac{\Delta t}{\Delta y} = \frac{1}{v} = \frac{1}{\sqrt{g\epsilon}}

    Correct

    lim⁡Δy→0ΔtΔy=1v=12gϵ\lim_{\Delta y \to 0} \frac{\Delta t}{\Delta y} = \frac{1}{v} = \frac{1}{\sqrt{2g\epsilon}}

    You correctly set the limiting transit-time ratio equal to 1v\frac{1}{v}, but the expression inherited the missing factor of 22 from Step 1.

  3. Step 3

    v=3.60×0.0400=0.144=0.379 m/sv = \sqrt{3.60 \times 0.0400} = \sqrt{0.144} = 0.379\text{ m/s}

    Correct

    v=2×3.60×0.0400=0.288≈0.537 m/sv = \sqrt{2 \times 3.60 \times 0.0400} = \sqrt{0.288} \approx 0.537\text{ m/s}

    Your arithmetic is consistent with your formula, but omitting the factor of 22 under the radical produced 0.379 m/s0.379\text{ m/s} instead of 0.537 m/s0.537\text{ m/s}.

  4. Step 4

    lim⁡Δy→0ΔtΔy=10.379≈2.64 s/m\lim_{\Delta y \to 0} \frac{\Delta t}{\Delta y} = \frac{1}{0.379} \approx 2.64\text{ s/m}

    Correct

    lim⁡Δy→0ΔtΔy=10.537≈1.86 s/m\lim_{\Delta y \to 0} \frac{\Delta t}{\Delta y} = \frac{1}{0.537} \approx 1.86\text{ s/m}

    You correctly inverted your calculated velocity, but the final value carried through the earlier factor error.

WHAT YOU DID WELL
Compliments from Your Teacher

You correctly identified that the limiting ratio lim⁡Δy→0ΔtΔy\lim_{\Delta y \to 0} \frac{\Delta t}{\Delta y} equals the reciprocal of instantaneous velocity, dtdy=1v\frac{dt}{dy} = \frac{1}{v}.

You correctly evaluated your expressions numerically without calculation or rounding errors.

THE ERROR
Where Your ACEpath Teacher Spotted the Mistake
Omitted Factor in Kinematic Equation

You omitted the factor of 22 in the constant-acceleration formula v2=2gϵv^2 = 2g\epsilon.

WHY IT HAPPENED
ACEpath Teacher's Diagnosis

You wrote v2=gϵv^2 = g\epsilon instead of using Torricelli's formula vf2−vi2=2aΔyv_f^2 - v_i^2 = 2a\Delta y (or conservation of energy 12mv2=mgϵ\frac{1}{2}mv^2 = mg\epsilon), which requires the factor of 22 multiplying acceleration and displacement.

REASONING PATH
Your ACEpath teacher’s suggested approach
Torricelli's Kinematic Equation
  • For constant acceleration aa over displacement Δy\Delta y, the velocity change satisfies v2−v02=2aΔyv^2 - v_0^2 = 2a\Delta y.

  • Always verify whether a formula comes from integrating a dya\,dy (which yields 12v2=ay\frac{1}{2}v^2 = a y, introducing the factor of 22) or check energy conservation: 12mv2=mgϵ  ⟹  v=2gϵ\frac{1}{2}mv^2 = mg\epsilon \implies v = \sqrt{2g\epsilon}.

CORRECTED PATH
ACEpath Teacher's Demonstration
  1. Apply the work-energy theorem or Torricelli's formula between height ywy_w and the apex: 0−v2=−2gϵ  ⟹  v(ϵ)=2gϵ0 - v^2 = -2g\epsilon \implies v(\epsilon) = \sqrt{2g\epsilon}.

  2. Substitute the given values into v(ϵ)v(\epsilon): v(0.0400)=2×3.60 m/s2×0.0400 m=0.288 m/s≈0.537 m/sv(0.0400) = \sqrt{2 \times 3.60\text{ m/s}^2 \times 0.0400\text{ m}} = \sqrt{0.288}\text{ m/s} \approx 0.537\text{ m/s}.

  3. Evaluate the limiting ratio using the corrected velocity: lim⁡Δy→0ΔtΔy=1v=10.288≈1.86 s/m\lim_{\Delta y \to 0} \frac{\Delta t}{\Delta y} = \frac{1}{v} = \frac{1}{\sqrt{0.288}} \approx 1.86\text{ s/m}.

Final answer

v(ϵ)=0.537 m/sv(\epsilon) = 0.537\text{ m/s}; lim⁡Δy→0ΔtΔy=12gϵ=1.86 s/m\lim_{\Delta y \to 0} \frac{\Delta t}{\Delta y} = \frac{1}{\sqrt{2g\epsilon}} = 1.86\text{ s/m}

NEXT STEPS
Final Takeaways from Your Teacher
  • Double-check kinematic formulas using dimensional analysis and conservation of energy (remembering the 12\frac{1}{2} in kinetic energy 12mv2\frac{1}{2}mv^2).

  • Practice deriving velocity near turning points in constant-acceleration fields to keep factors of 22 automatic.

OverviewACEpath Teacher's Diagnosis

02 The student misinterprets the limiting ratio Δt/Δy as average acceleration or velocity and writes Δt/Δy = v instead of 1/v.

Sample Student Work

Reviewed by ACEpath Teacher
Step-by-Step Review
Walk Through It with Your Teacher
Partially correct
  1. Step 1

    v=2gϵv = \sqrt{2g\epsilon}

  2. Step 2

    lim⁡Δy→0ΔtΔy=v=2gϵ\lim_{\Delta y \to 0} \frac{\Delta t}{\Delta y} = v = \sqrt{2g\epsilon}

    Correct

    lim⁡Δy→0ΔtΔy=dtdy=1v=12gϵ\lim_{\Delta y \to 0} \frac{\Delta t}{\Delta y} = \frac{dt}{dy} = \frac{1}{v} = \frac{1}{\sqrt{2g\epsilon}}

    Instantaneous velocity is defined as v=dydt=lim⁡Δt→0ΔyΔtv = \frac{dy}{dt} = \lim_{\Delta t \to 0} \frac{\Delta y}{\Delta t}. The ratio ΔtΔy\frac{\Delta t}{\Delta y} represents transit time per unit distance, which is the reciprocal dtdy=1v\frac{dt}{dy} = \frac{1}{v}.

  3. Step 3

    v=2×3.60×0.0400=0.288≈0.537 m/sv = \sqrt{2 \times 3.60 \times 0.0400} = \sqrt{0.288} \approx 0.537\text{ m/s}

  4. Step 4

    lim⁡Δy→0ΔtΔy=v≈0.537 s/m\lim_{\Delta y \to 0} \frac{\Delta t}{\Delta y} = v \approx 0.537\text{ s/m}

    Correct

    lim⁡Δy→0ΔtΔy=10.537 m/s≈1.86 s/m\lim_{\Delta y \to 0} \frac{\Delta t}{\Delta y} = \frac{1}{0.537\text{ m/s}} \approx 1.86\text{ s/m}

    This numerical result was affected by the earlier inversion mistake; evaluating 1v\frac{1}{v} gives approximately 1.86 s/m1.86\text{ s/m}.

WHAT YOU DID WELL
Compliments from Your Teacher

You correctly derived the relationship between instantaneous velocity and distance from the apex as v=2gϵv = \sqrt{2g\epsilon}.

You performed the numerical computation for velocity accurately, obtaining 0.537 m/s0.537\text{ m/s}.

THE ERROR
Where Your ACEpath Teacher Spotted the Mistake
Reciprocal derivative confusion

none

WHY IT HAPPENED
ACEpath Teacher's Diagnosis

You treated ΔtΔy\frac{\Delta t}{\Delta y} as velocity instead of recognizing it as the reciprocal of velocity dtdy=1v\frac{dt}{dy} = \frac{1}{v}.

REASONING PATH
Your ACEpath teacher’s suggested approach
Derivative Reciprocal Rule
  • By the chain rule / inverse function rule, dtdy=1dy/dt=1v\frac{dt}{dy} = \frac{1}{dy/dt} = \frac{1}{v}.

  • Always check whether the ratio is displacement over time (velocity) or time over displacement (reciprocal velocity).

Physical Limiting Behavior
  • As an object slows down to a stop (v→0v \to 0), the time it spends traversing a unit distance grows without bound: ΔtΔy→∞\frac{\Delta t}{\Delta y} \to \infty.

  • Verify that your limiting expression diverges as the apex is approached, rather than approaching zero.

CORRECTED PATH
ACEpath Teacher's Demonstration
  1. Take the reciprocal of instantaneous velocity: lim⁡Δy→0ΔtΔy=dtdy=1v(ϵ)=12gϵ\lim_{\Delta y \to 0} \frac{\Delta t}{\Delta y} = \frac{dt}{dy} = \frac{1}{v(\epsilon)} = \frac{1}{\sqrt{2g\epsilon}}.

  2. Substitute v≈0.5367 m/sv \approx 0.5367\text{ m/s} into the reciprocal expression: lim⁡Δy→0ΔtΔy=10.288≈1.86 s/m\lim_{\Delta y \to 0} \frac{\Delta t}{\Delta y} = \frac{1}{\sqrt{0.288}} \approx 1.86\text{ s/m}.

Final answer

v(ϵ)=0.537 m/sv(\epsilon) = 0.537\text{ m/s}; lim⁡Δy→0ΔtΔy=12gϵ=1.86 s/m\lim_{\Delta y \to 0} \frac{\Delta t}{\Delta y} = \frac{1}{\sqrt{2g\epsilon}} = 1.86\text{ s/m}

NEXT STEPS
Final Takeaways from Your Teacher
  • Review the distinction between velocity dydt\frac{dy}{dt} and slowness/transit rate dtdy\frac{dt}{dy}.

  • Practice using dimensional analysis to check whether units (exts/m ext{s/m} vs extm/s ext{m/s}) match the requested derivative.

  • Perform the follow-up flashcard and practice drills on inverse kinematic rates.

Lock it in

Similar question

01

A ball is thrown straight up on the Moon (g=1.60 m/s2g = 1.60\text{ m/s}^2). At a distance of ϵ=0.180 m\epsilon = 0.180\text{ m} below its peak, find its upward speed vv and the limiting transit time per unit height lim⁡Δy→0ΔtΔy\lim_{\Delta y \to 0} \frac{\Delta t}{\Delta y}.

Answer

Using v=2gϵ=2(1.60)(0.180)=0.576≈0.759 m/sv = \sqrt{2g\epsilon} = \sqrt{2(1.60)(0.180)} = \sqrt{0.576} \approx 0.759\text{ m/s}. The limiting ratio is 1v=10.759≈1.32 s/m\frac{1}{v} = \frac{1}{0.759} \approx 1.32\text{ s/m}.

02

A test particle is launched vertically upward under gravity gg. Show that the finite transit time Δt\Delta t to cover the final distance ϵ\epsilon up to the apex is Δt=2ϵg\Delta t = \sqrt{\frac{2\epsilon}{g}}, and compare this to ϵv(ϵ)\frac{\epsilon}{v(\epsilon)}.

Answer

By time reversal from rest at the apex, ϵ=12g(Δt)2  ⟹  Δt=2ϵg\epsilon = \frac{1}{2}g(\Delta t)^2 \implies \Delta t = \sqrt{\frac{2\epsilon}{g}}. Since v(ϵ)=2gϵv(\epsilon) = \sqrt{2g\epsilon}, the average velocity is vavg=ϵΔt=122gϵ=12v(ϵ)v_{\text{avg}} = \frac{\epsilon}{\Delta t} = \frac{1}{2}\sqrt{2g\epsilon} = \frac{1}{2}v(\epsilon), so ϵv(ϵ)=12Δt\frac{\epsilon}{v(\epsilon)} = \frac{1}{2}\Delta t.

03

A vertically launched probe passes through an upward optical window of finite height hh whose top edge is located at distance ϵ\epsilon below the apex. In terms of gg, ϵ\epsilon, and hh, determine the exact transit time TT through the window, and show that as h→0h \to 0, Th→12gϵ\frac{T}{h} \to \frac{1}{\sqrt{2g\epsilon}}.

Answer

The speed entering the bottom of the window is v1=2g(ϵ+h)v_1 = \sqrt{2g(\epsilon + h)} and leaving the top is v2=2gϵv_2 = \sqrt{2g\epsilon}. With constant downward acceleration gg, T=v1−v2g=2g(ϵ+h)−2gϵg=2ghg(2g(ϵ+h)+2gϵ)=2h2g(ϵ+h)+2gϵT = \frac{v_1 - v_2}{g} = \frac{\sqrt{2g(\epsilon + h)} - \sqrt{2g\epsilon}}{g} = \frac{2gh}{g(\sqrt{2g(\epsilon + h)} + \sqrt{2g\epsilon})} = \frac{2h}{\sqrt{2g(\epsilon + h)} + \sqrt{2g\epsilon}}. Dividing by hh and taking h→0h \to 0 gives lim⁡h→0Th=222gϵ=12gϵ\lim_{h \to 0} \frac{T}{h} = \frac{2}{2\sqrt{2g\epsilon}} = \frac{1}{\sqrt{2g\epsilon}}.

Loading workspace…