Resources

A double-slit apparatus is illuminated by light of wavelength λ=480 nm\lambda = 480\text{ nm}. The slit separation is d=0.144 mmd = 0.144\text{ mm} and each individual slit has a width a=0.0288 mma = 0.0288\text{ mm}. Because of the single-slit diffraction envelope modulating the double-slit interference fringes, certain interference bright fringes are suppressed (missing orders). Determine the order numbers mm of the first two interference maxima that are completely missing from the pattern, and state the total number of bright interference fringes visible within the central diffraction maximum.

Answer and steps

Final answer

First two missing orders: m=±5m = \pm 5 and m=±10m = \pm 10; total bright fringes in the central diffraction maximum: 99 (orders m=0,±1,±2,±3,±4m = 0, \pm 1, \pm 2, \pm 3, \pm 4)

Steps

01

Condition for Interference Maxima and Diffraction Minima

In a double-slit experiment where the slits have a finite width aa and a center-to-center separation dd, the intensity pattern is the product of a double-slit interference pattern and a single-slit diffraction envelope.

  • Interference bright fringes (maxima) occur at angles θ\theta satisfying: dsin⁡θ=mλ,m=0,±1,±2,…d \sin\theta = m\lambda, \quad m = 0, \pm 1, \pm 2, \dots where mm is the interference order.
  • Diffraction dark fringes (minima) for each individual slit occur at angles θ\theta satisfying: asin⁡θ=pλ,p=±1,±2,±3,…a \sin\theta = p\lambda, \quad p = \pm 1, \pm 2, \pm 3, \dots where pp is the diffraction order (p≠0p \neq 0, because p=0p = 0 corresponds to the central diffraction maximum).

02

Identifying the Missing Orders

A "missing order" occurs when an interference maximum falls at the exact angular position of a diffraction zero (minimum), completely suppressing that interference peak:

sin⁡θ=mλd=pλa\sin\theta = \frac{m\lambda}{d} = \frac{p\lambda}{a}

Dividing the two equations gives the relation between the interference order mm and the diffraction order pp:

mp=da\frac{m}{p} = \frac{d}{a}

Substitute the given values for dd and aa:

da=0.144 mm0.0288 mm=5\frac{d}{a} = \frac{0.144\text{ mm}}{0.0288\text{ mm}} = 5

Therefore: m=5pm = 5p

  • For the first diffraction minimum (p=±1p = \pm 1): m=5(±1)=±5m = 5(\pm 1) = \pm 5
  • For the second diffraction minimum (p=±2p = \pm 2): m=5(±2)=±10m = 5(\pm 2) = \pm 10

Thus, the first two missing interference orders are m=±5m = \pm 5 and m=±10m = \pm 10.


03

Number of Bright Fringes in the Central Diffraction Maximum

The central diffraction maximum is bounded by the first diffraction zeros on either side (p=−1p = -1 and p=+1p = +1):

−λa<sin⁡θ<λa-\frac{\lambda}{a} < \sin\theta < \frac{\lambda}{a}

Expressed in terms of the interference order mm:

−5<m<5-5 < m < 5

The integer values of mm strictly within this range are: m=−4,−3,−2,−1,0,1,2,3,4m = -4, -3, -2, -1, 0, 1, 2, 3, 4

Counting these values:

  • Negative orders: 44 fringes (m=−4,−3,−2,−1m = -4, -3, -2, -1)
  • Central fringe: 11 fringe (m=0m = 0)
  • Positive orders: 44 fringes (m=1,2,3,4m = 1, 2, 3, 4)

Total visible fringes=4+1+4=9\text{Total visible fringes} = 4 + 1 + 4 = 9

Common Pitfall: A common error is counting m=±5m = \pm 5 within the central maximum. Because m=±5m = \pm 5 corresponds precisely to the first diffraction zero where the intensity envelope drops to zero, these fringes are completely extinguished and do not appear.

Typical errors

OverviewACEpath Teacher's Diagnosis

01 The student includes the boundary missing order fringes in the count of visible fringes, reporting 11 fringes instead of 9.

Sample Student Work

Reviewed by ACEpath Teacher
Step-by-Step Review
Walk Through It with Your Teacher
Partially correct
  1. Step 1

    da=0.1440.0288=5  ⟹  m=5p  ⟹  First two missing orders are m=5 and m=10\frac{d}{a} = \frac{0.144}{0.0288} = 5 \implies m = 5p \implies \text{First two missing orders are } m = 5 \text{ and } m = 10

  2. Step 2

    Central diffraction peak goes up to \text{Central diffraction peak goes up to } m=5   ⟹  \implies Fringes range from \text{Fringes range from } m=-5  to \text{ to } m=+5   ⟹  \implies Total bright fringes\text{Total bright fringes} = 2(5) + 1 = 11

    Correct

    -5 < m < 5   ⟹  \implies m ∈\in {\{-4, -3, -2, -1, 0, 1, 2, 3, 4}\}   ⟹  \implies Total bright fringes\text{Total bright fringes} = 2(4) + 1 = 9

    The first diffraction minimum occurs at m=±5m = \pm 5, where the diffraction envelope has zero intensity. Because these boundary orders are extinguished, they cannot be counted as visible bright fringes. The visible fringes are strictly within the range −5<m<5-5 < m < 5, yielding 2(4)+1=92(4) + 1 = 9 fringes.

WHAT YOU DID WELL
Compliments from Your Teacher

You correctly set up the condition for missing orders using the ratio d/ad/a.

You accurately calculated the numerical ratio as 55 and identified m=5m = 5 and m=10m = 10 as the suppressed orders.

THE ERROR
Where Your ACEpath Teacher Spotted the Mistake
Boundary Missing Order Overcounted

You included the boundary orders m=±5m = \pm 5 in the total count of visible fringes.

WHY IT HAPPENED
ACEpath Teacher's Diagnosis

Conflating the angular boundary of the central diffraction envelope with a visible interference peak. The boundary of the central maximum is a diffraction zero (I=0I = 0), so an interference peak falling exactly on this boundary is suppressed to zero intensity and does not form a visible fringe.

REASONING PATH
Your ACEpath teacher’s suggested approach
Strict inequality for envelope bounds
  • The central diffraction maximum lies strictly between the first diffraction minima: −λa<sin⁡θ<λa-\frac{\lambda}{a} < \sin\theta < \frac{\lambda}{a}, which corresponds to −d/a<m<d/a-d/a < m < d/a.

  • Exclude the boundary integer values m=±d/am = \pm d/a when counting visible fringes.

CORRECTED PATH
ACEpath Teacher's Demonstration
  1. Identify the range of interference orders strictly inside the first diffraction zero: −5<m<5-5 < m < 5.

  2. List the visible integer values of mm: m=−4,−3,−2,−1,0,1,2,3,4m = -4, -3, -2, -1, 0, 1, 2, 3, 4.

  3. Count the total number of fringes: 4+1+4=2(4)+1=94 + 1 + 4 = 2(4) + 1 = 9.

Final answer

Total number of bright fringes visible within the central diffraction maximum is 99.

NEXT STEPS
Final Takeaways from Your Teacher
  • Practice applying the formula N=2(d/a−1)+1N = 2(d/a - 1) + 1 whenever d/ad/a is an exact integer.

  • Verify edge conditions on diffraction envelopes by checking whether the intensity drops to zero at the boundary.

OverviewACEpath Teacher's Diagnosis

02 The student forgets to count the central zeroth-order maximum (m = 0), yielding 8 bright fringes instead of 9.

Sample Student Work

Reviewed by ACEpath Teacher
Step-by-Step Review
Walk Through It with Your Teacher
Partially correct
  1. Step 1

    d/a=0.1440.0288=5  ⟹  Missing orders occur at m=5 and m=10d/a = \frac{0.144}{0.0288} = 5 \implies \text{Missing orders occur at } m=5 \text{ and } m=10

  2. Step 2

    visible orders are m=±1,±2,±3,±4\text{visible orders are } m = \pm 1, \pm 2, \pm 3, \pm 4

    Correct

    visible orders are m=0,±1,±2,±3,±4\text{visible orders are } m = 0, \pm 1, \pm 2, \pm 3, \pm 4

    You listed the non-zero orders bounded by m=±5m = \pm 5, but you omitted the central maximum at m=0m = 0.

  3. Step 3

    Total bright fringes=4+4=8\text{Total bright fringes} = 4 + 4 = 8

    Correct

    Total bright fringes=4+1+4=9\text{Total bright fringes} = 4 + 1 + 4 = 9

    Because the central fringe at m=0m = 0 was omitted in the previous step, your total count of bright fringes was off by 11.

WHAT YOU DID WELL
Compliments from Your Teacher

You correctly calculated the ratio of slit separation to slit width as d/a=5d/a = 5.

You accurately identified the condition for missing orders where interference peaks coincide with diffraction zeros.

You correctly identified the boundary m=±5m = \pm 5 corresponding to the first diffraction minimum.

THE ERROR
Where Your ACEpath Teacher Spotted the Mistake
Omission of Central Maximum

You set up the boundaries correctly but overlooked the central zeroth-order bright fringe at m=0m = 0 when counting visible fringes.

WHY IT HAPPENED
ACEpath Teacher's Diagnosis

Treating the interference fringe order mm as strictly non-zero indices rather than remembering that interference patterns always include the central peak at m=0m = 0.

REASONING PATH
Your ACEpath teacher’s suggested approach
Include the Central Fringe
  • Double-slit interference always produces a central bright fringe at m=0m = 0 where the path difference is zero.

  • Whenever counting fringes in an interval −k<m<k-k < m < k, compute the total as 2(k−1)+12(k - 1) + 1, where the +1+1 represents the central m=0m = 0 fringe.

CORRECTED PATH
ACEpath Teacher's Demonstration
  1. Include the central interference maximum at m=0m = 0, giving the complete set of visible orders: m=0,±1,±2,±3,±4m = 0, \pm 1, \pm 2, \pm 3, \pm 4.

  2. Count all orders in this set: 44 negative orders (−4,−3,−2,−1-4, -3, -2, -1), 11 central order (00), and 44 positive orders (1,2,3,41, 2, 3, 4).

  3. Calculate the total: 4+1+4=94 + 1 + 4 = 9 bright fringes.

Final answer

First two missing orders: m=±5,±10m = \pm 5, \pm 10; Total bright fringes in central diffraction maximum: 99

NEXT STEPS
Final Takeaways from Your Teacher
  • Always write out m=0m = 0 explicitly when listing interference orders.

  • Use the formula N=2(n−1)+1N = 2(n - 1) + 1 when d/a=nd/a = n is an integer to automatically include the central fringe.

OverviewACEpath Teacher's Diagnosis

03 The student inverts the ratio as a/d instead of d/a to find missing orders, concluding that orders are fractional or misidentifying m = 1 and m = 2.

Sample Student Work

Reviewed by ACEpath Teacher
Step-by-Step Review
Walk Through It with Your Teacher
Incorrect
  1. Step 1

    Missing orders occur when m=ad⋅p  ⟹  ad=0.02880.144=0.2\text{Missing orders occur when } m = \frac{a}{d} \cdot p \implies \frac{a}{d} = \frac{0.0288}{0.144} = 0.2

    Correct

    sin⁡θ=mλd=pλa  ⟹  m=dap  ⟹  da=0.144 mm0.0288 mm=5\sin\theta = \frac{m\lambda}{d} = \frac{p\lambda}{a} \implies m = \frac{d}{a}p \implies \frac{d}{a} = \frac{0.144\text{ mm}}{0.0288\text{ mm}} = 5

    You inverted the relation between the orders. Since double-slit maxima satisfy sin⁡θ=mλd\sin\theta = \frac{m\lambda}{d} and single-slit minima satisfy sin⁡θ=pλa\sin\theta = \frac{p\lambda}{a}, equating them gives md=pa\frac{m}{d} = \frac{p}{a}, which leads to m=dapm = \frac{d}{a}p, not adp\frac{a}{d}p.

  2. Step 2

    First two missing orders are m=1 and m=2\text{First two missing orders are } m = 1 \text{ and } m = 2

    Correct

    m=5p  ⟹  m=±5 for p=±1, and m=±10 for p=±2m = 5p \implies m = \pm 5 \text{ for } p = \pm 1, \text{ and } m = \pm 10 \text{ for } p = \pm 2

    Because of the inverted formula in the previous step, you did not use m=5pm = 5p. Setting p=±1p = \pm 1 and p=±2p = \pm 2 into m=5pm = 5p gives the first two missing orders as m=±5m = \pm 5 and m=±10m = \pm 10.

  3. Step 3

    Since m=1 is missing, only the central fringe is present  ⟹  Total bright fringes=1\text{Since } m=1 \text{ is missing, only the central fringe is present} \implies \text{Total bright fringes} = 1

    Correct

    −5<m<5  ⟹  m∈{−4,−3,−2,−1,0,1,2,3,4}  ⟹  4+1+4=9 bright fringes-5 < m < 5 \implies m \in \{-4, -3, -2, -1, 0, 1, 2, 3, 4\} \implies 4 + 1 + 4 = 9 \text{ bright fringes}

    Because the first missing order is actually m=±5m = \pm 5, the central diffraction envelope contains all interference orders strictly between −5-5 and +5+5. This yields a total of 99 bright fringes (m=0,±1,±2,±3,±4m = 0, \pm 1, \pm 2, \pm 3, \pm 4).

WHAT YOU DID WELL
Compliments from Your Teacher

You correctly linked missing interference orders to the overlap with single-slit diffraction minima.

You accurately substituted the numerical values of slit width and slit separation into your chosen fraction.

THE ERROR
Where Your ACEpath Teacher Spotted the Mistake
Inverted Missing-Order Ratio

You set m=adpm = \frac{a}{d}p instead of cross-multiplying md=pa\frac{m}{d} = \frac{p}{a} to obtain m=dapm = \frac{d}{a}p.

WHY IT HAPPENED
ACEpath Teacher's Diagnosis

Confusing the proportionality between slit geometry and angular order numbers by not deriving sin⁡θ=mλd=pλa\sin\theta = \frac{m\lambda}{d} = \frac{p\lambda}{a} explicitly from the fundamental conditions.

REASONING PATH
Your ACEpath teacher’s suggested approach
Condition for Missing Orders
  • Interference maximum condition is dsin⁡θ=mλd\sin\theta = m\lambda, and single-slit minimum condition is asin⁡θ=pλa\sin\theta = p\lambda.

  • Always write down both angular conditions first, solve each for sin⁡θ\sin\theta, and equate them directly: mλd=pλa  ⟹  m=(da)p\frac{m\lambda}{d} = \frac{p\lambda}{a} \implies m = \left(\frac{d}{a}\right)p.

Sanity Check on Slit Dimensions
  • Slit separation dd is always greater than individual slit width aa (d>ad > a), which means da>1\frac{d}{a} > 1.

  • Check that the multiplier for pp is greater than 11. Interference fringes are spaced much closer together than the broad diffraction envelope, so multiple interference orders (m>1m > 1) must fit inside the first diffraction minimum (p=1p = 1).

CORRECTED PATH
ACEpath Teacher's Demonstration
  1. Equate the two conditions: dsin⁡θ=mλd\sin\theta = m\lambda and asin⁡θ=pλ  ⟹  sin⁡θ=mλd=pλaa\sin\theta = p\lambda \implies \sin\theta = \frac{m\lambda}{d} = \frac{p\lambda}{a}.

  2. Solve for the interference order mm: m=dap=0.144 mm0.0288 mmp=5pm = \frac{d}{a}p = \frac{0.144\text{ mm}}{0.0288\text{ mm}}p = 5p.

  3. Find the first two missing orders by substituting p=±1p = \pm 1 and p=±2p = \pm 2: m=±5m = \pm 5 and m=±10m = \pm 10.

  4. Determine the visible fringes in the central diffraction maximum bounded by p=±1p = \pm 1 (where m=±5m = \pm 5): the allowed integer orders strictly within (−5,5)(-5, 5) are m=−4,−3,−2,−1,0,1,2,3,4m = -4, -3, -2, -1, 0, 1, 2, 3, 4, giving 4+1+4=94 + 1 + 4 = 9 fringes.

Final answer

First two missing orders: m=±5m = \pm 5 and m=±10m = \pm 10; total bright fringes: 99

NEXT STEPS
Final Takeaways from Your Teacher
  • Practice deriving the missing-order condition m=dapm = \frac{d}{a}p starting from basic principles rather than memorizing a formula.

  • Use physical intuition (d>ad > a means interference fringes are finer than the diffraction envelope) as a quick check against ratio inversion.

  • Count visible fringes by listing orders strictly between the boundaries −d/a<m<d/a-d/a < m < d/a to avoid accidentally including extinguished fringes.

Lock it in

Similar question

01

A double slit has slit spacing d=0.20 mmd = 0.20\text{ mm} and slit width a=0.04 mma = 0.04\text{ mm}. Find the first missing interference order and the number of bright fringes in the central diffraction maximum.

Answer

Ratio da=0.200.04=5\frac{d}{a} = \frac{0.20}{0.04} = 5. The first missing order is m=±5m = \pm 5. The visible fringes within the central maximum correspond to m=0,±1,±2,±3,±4m = 0, \pm 1, \pm 2, \pm 3, \pm 4, giving 2(4)+1=92(4) + 1 = 9 bright fringes.

02

In a double-slit experiment, the third interference fringe (m=3m = 3) on either side of the central fringe is completely absent. What is the ratio of the slit separation dd to the slit width aa, and how many total interference fringes appear within the central diffraction envelope?

Answer

Since m=3m = 3 coincides with the first diffraction minimum (p=1p = 1), da=mp=3\frac{d}{a} = \frac{m}{p} = 3. The visible fringes are m=−2,−1,0,1,2m = -2, -1, 0, 1, 2, giving a total of 2(2)+1=52(2) + 1 = 5 bright fringes.

03

A double slit with a=0.03 mma = 0.03\text{ mm} produces an interference pattern where the first single-slit diffraction minimum occurs at an angle of θ=0.02 rad\theta = 0.02\text{ rad}. If 1313 bright interference fringes are visible within the central diffraction peak, determine the slit separation dd. (Assume small-angle approximation sin⁡θ≈θ\sin\theta \approx \theta).

Answer

A total of 1313 fringes means 2k+1=13  ⟹  k=62k + 1 = 13 \implies k = 6, so the fringes run from m=−6m = -6 to +6+6, making m=±7m = \pm 7 the first missing order. Thus da=7\frac{d}{a} = 7, which gives d=7a=7(0.03 mm)=0.21 mmd = 7a = 7(0.03\text{ mm}) = 0.21\text{ mm}.

Loading workspace…