Resources

A motorized compression launcher compresses a linear spring of force constant k=4200 N/mk = 4200\text{ N/m} by a distance of x=0.350 mx = 0.350\text{ m} on a horizontal launch track. The motor consumes an input energy of Ein=385 JE_{\text{in}} = 385\text{ J} during the compression process. Upon release from rest, the spring transfers all of its stored elastic potential energy into kinetic energy of a projectile of mass m=0.850 kgm = 0.850\text{ kg}. The projectile exits the spring horizontally at the edge of a flat platform of height H=1.60 mH = 1.60\text{ m} and enters free-fall projectile motion until it strikes the horizontal floor below. Neglecting friction along the track and air resistance, calculate: (a) the mechanical efficiency η\eta of the spring-charging mechanism, and (b) the horizontal range RR traveled by the projectile from the edge of the platform to the floor. (Take g=9.80 m/s2g = 9.80\text{ m/s}^2.)

Answer and steps

Final answer

(a) η=66.8%\eta = 66.8\%; (b) R=14.1 mR = 14.1\text{ m}

Steps

Part (a): Calculating the Mechanical Efficiency

  1. Determine the useful energy output stored in the spring:
    The mechanical work performed to compress a linear spring with spring constant kk by a displacement xx is stored as elastic potential energy UeU_e: Ue=12kx2U_e = \frac{1}{2} k x^2 Substitute the given values: Ue=12(4200 N/m)(0.350 m)2=2100×0.1225 J=257.25 JU_e = \frac{1}{2} (4200\text{ N/m}) (0.350\text{ m})^2 = 2100 \times 0.1225\text{ J} = 257.25\text{ J}
  2. Compute the mechanical efficiency:
    Efficiency η\eta is the ratio of useful energy output Eout=UeE_{\text{out}} = U_e to the total energy input EinE_{\text{in}} consumed by the motor: η=EoutEin×100%=257.25 J385 J×100%≈66.818%≈66.8%\eta = \frac{E_{\text{out}}}{E_{\text{in}}} \times 100\% = \frac{257.25\text{ J}}{385\text{ J}} \times 100\% \approx 66.818\% \approx 66.8\%

Part (b): Calculating the Horizontal Range

  1. Find the horizontal launch velocity (v0v_0):
    Assuming ideal energy transfer with no friction, the stored elastic potential energy converts entirely into the translational kinetic energy of the projectile of mass mm: Ue=12mv02U_e = \frac{1}{2} m v_0^2 Solving for the launch speed v0v_0: v0=2Uem=2⋅257.25 J0.850 kg=514.50.850≈24.60 m/sv_0 = \sqrt{\frac{2 U_e}{m}} = \sqrt{\frac{2 \cdot 257.25\text{ J}}{0.850\text{ kg}}} = \sqrt{\frac{514.5}{0.850}} \approx 24.60\text{ m/s}
  2. Determine the time of flight (tt):
    The projectile leaves the track horizontally, so its initial vertical velocity is zero (v0y=0v_{0y} = 0). Under uniform gravitational acceleration gg, the time tt required to fall from a height HH is: H=12gt2  ⟹  t=2HgH = \frac{1}{2} g t^2 \implies t = \sqrt{\frac{2H}{g}} Substitute H=1.60 mH = 1.60\text{ m} and g=9.80 m/s2g = 9.80\text{ m/s}^2: t=2(1.60 m)9.80 m/s2=3.209.80≈0.5714 st = \sqrt{\frac{2(1.60\text{ m})}{9.80\text{ m/s}^2}} = \sqrt{\frac{3.20}{9.80}} \approx 0.5714\text{ s}
  3. Compute the horizontal range (RR):
    Because horizontal acceleration is zero (ax=0a_x = 0), the horizontal distance traveled is: R=v0t=(24.60 m/s)(0.5714 s)≈14.06 m≈14.1 mR = v_0 t = (24.60\text{ m/s})(0.5714\text{ s}) \approx 14.06\text{ m} \approx 14.1\text{ m}

Typical errors

OverviewACEpath Teacher's Diagnosis

01 The student forgets to square the compression distance x when calculating the spring's potential energy, leading to an understated efficiency and range.

Sample Student Work

Reviewed by ACEpath Teacher
Step-by-Step Review
Walk Through It with Your Teacher
Incorrect
  1. Step 1

    Us=12kx=12(4200)(0.350)=735 JU_s = \frac{1}{2}kx = \frac{1}{2}(4200)(0.350) = 735\text{ J}

    Correct

    Ue=12kx2=12(4200)(0.350)2=257.25 JU_e = \frac{1}{2}kx^2 = \frac{1}{2}(4200)(0.350)^2 = 257.25\text{ J}

    You forgot to square the compression distance xx in the elastic potential energy formula. Hooke's law potential energy is quadratic with displacement: U=12kx2U = \frac{1}{2}kx^2.

  2. Step 2

    η=UsEin=735385=1.91\eta = \frac{U_s}{E_{\text{in}}} = \frac{735}{385} = 1.91

    Correct

    η=UeEin=257.25 J385 J≈0.668=66.8%\eta = \frac{U_e}{E_{\text{in}}} = \frac{257.25\text{ J}}{385\text{ J}} \approx 0.668 = 66.8\%

    Your efficiency definition is correct, but your calculation is affected by the incorrect value of UsU_s. Note also that an efficiency greater than 1.01.0 (or 100%100\%) violates the conservation of energy and serves as an immediate check that UsU_s was too large.

  3. Step 3

    12mv2=Us  ⟹  v=2(735)0.850=41.58 m/s\frac{1}{2}mv^2 = U_s \implies v = \sqrt{\frac{2(735)}{0.850}} = 41.58\text{ m/s}

    Correct

    v0=2Uem=2(257.25 J)0.850 kg≈24.60 m/sv_0 = \sqrt{\frac{2U_e}{m}} = \sqrt{\frac{2(257.25\text{ J})}{0.850\text{ kg}}} \approx 24.60\text{ m/s}

    Your application of energy conservation to find launch velocity is algebraically correct, but substituting Us=735 JU_s = 735\text{ J} instead of 257.25 J257.25\text{ J} resulted in an overstated launch speed.

  4. Step 4

    t=2(1.60)9.80=0.571 st = \sqrt{\frac{2(1.60)}{9.80}} = 0.571\text{ s}

  5. Step 5

    R=vt=(41.58)(0.571)=23.7 mR = vt = (41.58)(0.571) = 23.7\text{ m}

    Correct

    R=v0t=(24.60 m/s)(0.5714 s)≈14.1 mR = v_0 t = (24.60\text{ m/s})(0.5714\text{ s}) \approx 14.1\text{ m}

    Your kinematic range equation is correct, but the final range is carried forward from the inflated launch velocity.

WHAT YOU DID WELL
Compliments from Your Teacher

You correctly defined mechanical efficiency as the ratio of useful output energy to input energy.

You recognized that elastic potential energy converts entirely into projectile kinetic energy.

You accurately solved for the time of flight using vertical free-fall kinematics.

You combined horizontal velocity and flight time correctly to find the range.

THE ERROR
Where Your ACEpath Teacher Spotted the Mistake
Missing exponent in formula

You wrote kxkx rather than kx2kx^2 when evaluating the stored spring energy.

WHY IT HAPPENED
ACEpath Teacher's Diagnosis

You conflated the linear restoring force equation F=kxF = kx with the quadratic elastic potential energy formula U=12kx2U = \frac{1}{2}kx^2, omitting the square on displacement.

REASONING PATH
Your ACEpath teacher’s suggested approach
Elastic Energy vs. Restoring Force
  • The restoring force is F=kxF = kx (units of N\text{N}), whereas elastic potential energy is Ue=∫kx dx=12kx2U_e = \int kx\,dx = \frac{1}{2}kx^2 (units of J\text{J}).

  • Always verify that displacement is squared when calculating spring potential energy.

Sanity-Checking Mechanical Efficiency
  • For any passive or motorized machine without an external hidden source of energy, mechanical efficiency must satisfy 0≤η≤100%0 \le \eta \le 100\%.

  • If your computed efficiency exceeds 11 (or 100%100\%), immediately recheck your numerator EoutE_{\text{out}}.

CORRECTED PATH
ACEpath Teacher's Demonstration
  1. Recalculate stored elastic potential energy: Ue=12kx2=12(4200 N/m)(0.350 m)2=257.25 JU_e = \frac{1}{2}kx^2 = \frac{1}{2}(4200\text{ N/m})(0.350\text{ m})^2 = 257.25\text{ J}.

  2. Compute efficiency: η=257.25 J385 J×100%≈66.8%\eta = \frac{257.25\text{ J}}{385\text{ J}} \times 100\% \approx 66.8\%.

  3. Compute launch velocity: v0=2(257.25 J)0.850 kg≈24.60 m/sv_0 = \sqrt{\frac{2(257.25\text{ J})}{0.850\text{ kg}}} \approx 24.60\text{ m/s}.

  4. Combine with flight time t≈0.5714 st \approx 0.5714\text{ s}: R=(24.60 m/s)(0.5714 s)≈14.1 mR = (24.60\text{ m/s})(0.5714\text{ s}) \approx 14.1\text{ m}.

Final answer

(a) η=66.8%\eta = 66.8\%; (b) R=14.1 mR = 14.1\text{ m}

NEXT STEPS
Final Takeaways from Your Teacher
  • Review the work integral W=∫F dxW = \int F\,dx to reinforce why linear restoring forces yield quadratic energy expressions.

  • Practice using efficiency upper bounds (<100%< 100\%) as an automatic sanity check during problem solving.

OverviewACEpath Teacher's Diagnosis

02 The student misremembers the time-of-flight formula as t = 2H / g instead of taking the square root, underestimating the time of flight and range.

Sample Student Work

Reviewed by ACEpath Teacher
Step-by-Step Review
Walk Through It with Your Teacher
Partially correct
  1. Step 1

    Us=12×4200×(0.350)2=257.25 JU_s = \frac{1}{2} \times 4200 \times (0.350)^2 = 257.25\text{ J}

  2. Step 2

    η=257.25385=0.668\eta = \frac{257.25}{385} = 0.668

  3. Step 3

    v=2×257.250.850=24.60 m/sv = \sqrt{\frac{2 \times 257.25}{0.850}} = 24.60\text{ m/s}

  4. Step 4

    t=2×1.609.80=0.327 st = \frac{2 \times 1.60}{9.80} = 0.327\text{ s}

    Correct

    t=2Hg=2(1.60)9.80≈0.571 st = \sqrt{\frac{2H}{g}} = \sqrt{\frac{2(1.60)}{9.80}} \approx 0.571\text{ s}

    You solved H=12gt2H = \frac{1}{2}gt^2 as t=2Hgt = \frac{2H}{g} instead of taking the square root to get t=2Hgt = \sqrt{\frac{2H}{g}}.

  5. Step 5

    R=24.60×0.327=8.04 mR = 24.60 \times 0.327 = 8.04\text{ m}

    Correct

    R=v0t=(24.60 m/s)(0.5714 s)≈14.1 mR = v_0 t = (24.60\text{ m/s})(0.5714\text{ s}) \approx 14.1\text{ m}

    Your formula R=vtR = v t is conceptually sound, but the numerical result is affected by your earlier calculation of tt.

WHAT YOU DID WELL
Compliments from Your Teacher

You correctly calculated the elastic potential energy stored in the spring.

You set up the ratio of useful energy output to input energy accurately to find the efficiency.

You equated elastic potential energy to kinetic energy to find the launch speed.

THE ERROR
Where Your ACEpath Teacher Spotted the Mistake
Omitted square root in free-fall kinematics

You set t=2Hgt = \frac{2H}{g} rather than t=2Hgt = \sqrt{\frac{2H}{g}}, forgetting that time appears squared in H=12gt2H = \frac{1}{2}gt^2.

WHY IT HAPPENED
ACEpath Teacher's Diagnosis

Confusing quadratic kinematic relations with linear equations when solving for time from vertical displacement.

REASONING PATH
Your ACEpath teacher’s suggested approach
Dimensional and Power Check
  • For uniform acceleration from rest, H=12gt2H = \frac{1}{2}gt^2, which means t2=2Hgt^2 = \frac{2H}{g} and t=2Hgt = \sqrt{\frac{2H}{g}}.

  • Always check units: 2Hg\frac{2H}{g} has units of mm/s2=s2\frac{\text{m}}{\text{m/s}^2} = \text{s}^2, so you must take the square root to obtain seconds.

CORRECTED PATH
ACEpath Teacher's Demonstration
  1. t=2Hg=2(1.60 m)9.80 m/s2=0.3265 s2≈0.5714 st = \sqrt{\frac{2H}{g}} = \sqrt{\frac{2(1.60\text{ m})}{9.80\text{ m/s}^2}} = \sqrt{0.3265\text{ s}^2} \approx 0.5714\text{ s}

  2. R=v0t=(24.60 m/s)(0.5714 s)≈14.06 m≈14.1 mR = v_0 t = (24.60\text{ m/s})(0.5714\text{ s}) \approx 14.06\text{ m} \approx 14.1\text{ m}

Final answer

(a) η=66.8%\eta = 66.8\%; (b) R=14.1 mR = 14.1\text{ m}

NEXT STEPS
Final Takeaways from Your Teacher
  • Check the units of intermediate algebraic expressions before entering numbers into your calculator.

  • Write out the governing kinematic equation H=v0yt+12gt2H = v_{0y}t + \frac{1}{2}gt^2 explicitly before isolating tt.

OverviewACEpath Teacher's Diagnosis

03 The student forgets the factor of 1/2 in the kinetic energy formula when solving for the horizontal velocity, resulting in an underestimated launch speed and range.

Sample Student Work

Reviewed by ACEpath Teacher
Step-by-Step Review
Walk Through It with Your Teacher
Partially correct
  1. Step 1

    Us=12kx2=124200(0.350)2=257.25 JU_s = \frac{1}{2} k x^2 = \frac{1}{2} 4200 (0.350)^2 = 257.25\text{ J}

  2. Step 2

    η=UsEin=257.25385=0.668\eta = \frac{U_s}{E_{\text{in}}} = \frac{257.25}{385} = 0.668

  3. Step 3

    mv2=Us  ⟹  v=257.250.850=17.40 m/sm v^2 = U_s \implies v = \sqrt{\frac{257.25}{0.850}} = 17.40\text{ m/s}

    Correct

    12mv2=Us  ⟹  v=2Usm=2(257.25 J)0.850 kg≈24.60 m/s\frac{1}{2} m v^2 = U_s \implies v = \sqrt{\frac{2 U_s}{m}} = \sqrt{\frac{2(257.25\text{ J})}{0.850\text{ kg}}} \approx 24.60\text{ m/s}

    Translational kinetic energy is K=12mv2K = \frac{1}{2} m v^2, not mv2m v^2. Omitting the factor of 12\frac{1}{2} led to an underestimated launch velocity.

  4. Step 4

    t=2∗1.609.80=0.571 st = \sqrt{\frac{2 * 1.60}{9.80}} = 0.571\text{ s}

  5. Step 5

    R=v∗t=17.40∗0.571=9.94 mR = v * t = 17.40 * 0.571 = 9.94\text{ m}

    Correct

    R=vt=(24.60 m/s)(0.5714 s)≈14.1 mR = v t = (24.60\text{ m/s})(0.5714\text{ s}) \approx 14.1\text{ m}

    Your range formula R=vtR = v t is conceptually correct, but your numerical result was affected by the incorrect launch velocity from Step 3.

WHAT YOU DID WELL
Compliments from Your Teacher

You correctly calculated the stored elastic potential energy using Us=12kx2U_s = \frac{1}{2}kx^2.

You accurately found the mechanism's efficiency by dividing useful energy output by energy input.

You set up and evaluated the vertical time of flight correctly using free-fall kinematics.

THE ERROR
Where Your ACEpath Teacher Spotted the Mistake
Kinetic Energy Formula Omission

You wrote mv2=Usm v^2 = U_s instead of 12mv2=Us\frac{1}{2} m v^2 = U_s, omitting the factor of 12\frac{1}{2}.

WHY IT HAPPENED
ACEpath Teacher's Diagnosis

Confusing kinetic energy with momentum-like or unscaled quadratic expressions leads to omitting the standard 12\frac{1}{2} prefactor in K=12mv2K = \frac{1}{2} m v^2, which causes velocity to be underestimated by a factor of 2\sqrt{2}.

REASONING PATH
Your ACEpath teacher’s suggested approach
Kinetic Energy Definition
  • Translational kinetic energy is given by K=12mv2K = \frac{1}{2} m v^2.

  • Always verify that both energy terms (Us=12kx2U_s = \frac{1}{2}kx^2 and K=12mv2K = \frac{1}{2}mv^2) include their respective 12\frac{1}{2} factors before solving for speed.

CORRECTED PATH
ACEpath Teacher's Demonstration
  1. Set up the conservation of energy equation: 12mv2=Us\frac{1}{2} m v^2 = U_s.

  2. Solve for the launch velocity: v=2Usm=2(257.25 J)0.850 kg≈24.60 m/sv = \sqrt{\frac{2 U_s}{m}} = \sqrt{\frac{2(257.25\text{ J})}{0.850\text{ kg}}} \approx 24.60\text{ m/s}.

  3. Multiply velocity by the vertical flight time: R=vt=(24.60 m/s)(0.5714 s)≈14.06 m≈14.1 mR = v t = (24.60\text{ m/s})(0.5714\text{ s}) \approx 14.06\text{ m} \approx 14.1\text{ m}.

Final answer

(a) η=66.8%\eta = 66.8\%; (b) R=14.1 mR = 14.1\text{ m}

NEXT STEPS
Final Takeaways from Your Teacher
  • Double-check that kinetic energy always contains the 12\frac{1}{2} coefficient when converting between potential and kinetic energy.

  • Perform dimensional or ratio checks: when setting 12kx2=12mv2\frac{1}{2}kx^2 = \frac{1}{2}mv^2, note that the factors of 12\frac{1}{2} cancel, leaving v=xk/mv = x\sqrt{k/m}.

Lock it in

Similar question

01

An electric winch consumes 500 J500\text{ J} of electrical energy to compress a spring of stiffness k=2500 N/mk = 2500\text{ N/m} by 0.40 m0.40\text{ m}. What is the mechanical efficiency of the winch mechanism?

Answer

40%40\%. Useful elastic energy stored is U=12kx2=12(2500 N/m)(0.40 m)2=200 JU = \frac{1}{2}kx^2 = \frac{1}{2}(2500\text{ N/m})(0.40\text{ m})^2 = 200\text{ J}. Efficiency is η=UEin=200 J500 J=0.40=40%\eta = \frac{U}{E_{\text{in}}} = \frac{200\text{ J}}{500\text{ J}} = 0.40 = 40\%.

02

A toy launcher with efficiency η=75%\eta = 75\% consumes 60 J60\text{ J} of input energy to compress a spring of stiffness k=3600 N/mk = 3600\text{ N/m}. What is the compression distance xx of the spring?

Answer

0.158 m0.158\text{ m} (or 15.8 cm15.8\text{ cm}). Useful stored energy is U=ηEin=(0.75)(60 J)=45 JU = \eta E_{\text{in}} = (0.75)(60\text{ J}) = 45\text{ J}. Solving U=12kx2U = \frac{1}{2}kx^2 gives x=2Uk=2(45)3600=0.025≈0.158 mx = \sqrt{\frac{2U}{k}} = \sqrt{\frac{2(45)}{3600}} = \sqrt{0.025} \approx 0.158\text{ m}.

03

A mechanism with 80%80\% efficiency uses 180 J180\text{ J} of input energy to compress a horizontal spring (k=3200 N/mk = 3200\text{ N/m}). When released, the spring propels a 0.50 kg0.50\text{ kg} block across a rough horizontal track of length d=2.0 md = 2.0\text{ m} with coefficient of kinetic friction μk=0.25\mu_k = 0.25 before the block leaves a platform. Find the block's speed at the end of the rough track. (Take g=9.8 m/s2g = 9.8\text{ m/s}^2.)

Answer

23.6 m/s23.6\text{ m/s}. Useful energy stored is U=0.80×180 J=144 JU = 0.80 \times 180\text{ J} = 144\text{ J}. Work done against friction is Wf=μkmgd=(0.25)(0.50 kg)(9.8 m/s2)(2.0 m)=2.45 JW_f = \mu_k m g d = (0.25)(0.50\text{ kg})(9.8\text{ m/s}^2)(2.0\text{ m}) = 2.45\text{ J}. Remaining kinetic energy is Ek=144 J−2.45 J=141.55 JE_k = 144\text{ J} - 2.45\text{ J} = 141.55\text{ J}. Speed is v=2(141.55)0.50≈23.6 m/sv = \sqrt{\frac{2(141.55)}{0.50}} \approx 23.6\text{ m/s}.

Loading workspace…