Resources
An engineer monitors a high-speed cooling fan whose rotation about its central axis is governed by the angular position function , where , , and are positive physical constants. A sensor snapshot records that at time , the fan's instantaneous angular velocity is and its instantaneous angular acceleration is . Working backwards from these kinematic measurements, determine the numerical values of the model coefficients and in their proper SI units.
Answer and steps
Final answer
,
Steps
Relate Kinematic Quantities via Differentiation
The instantaneous angular velocity and instantaneous angular acceleration are defined as the first and second time derivatives of the angular position function , respectively:
The constant term vanishes upon differentiation because the initial reference angle does not affect the rate of rotation.
Set Up the System of Equations
Substitute the recorded time into the velocity equation:
Given :
Divide both sides by to simplify:
Solve for the Model Coefficients
Pairing this linear relation with the kinematic acceleration condition allows us to solve for :
Substitute back into the expression for :
Both values are positive physical constants, matching the model specification.
Dimensional and Unit Verification
To ensure dimensional consistency in , each term must have the dimensions of an angle in radians ():
- For :
- For :
Thus, the numerical values and their SI units are:
Typical errors
01 The student drops the factor of 2 when taking the derivative of the linear term -2c₂t, leading to incorrect coefficient values.
Sample Student Work
Reviewed by ACEpath TeacherStep-by-Step Review
Walk Through It with Your Teacher- Step 1
- Step 2Correct
When differentiating the term with respect to , the constant multiplier is , so its derivative is , not .
- Step 3
,
Correct,
Your substitution of followed the correct procedure, but the acceleration equation inherited the missing factor of from the previous step.
- Step 4
,
Correct,
You solved your linear system algebraically without additional arithmetic errors, but the resulting values are incorrect because of the derivative mistake in Step 2. Notice that finding a negative also conflicted with the condition that is positive.
WHAT YOU DID WELL
Compliments from Your TeacherYou correctly identified that angular velocity and acceleration are the first and second time derivatives of angular position.
You correctly differentiated the cubic and quadratic terms using the power rule.
You accurately substituted the given numerical snapshot values at and solved the resulting two-variable system.
THE ERROR
Where Your ACEpath Teacher Spotted the MistakeYou dropped the coefficient when computing , writing instead of .
WHY IT HAPPENED
ACEpath Teacher's DiagnosisIncomplete application of the constant multiple rule when the coefficient contains both a number and a variable parameter (here ).
REASONING PATH
Your ACEpath teacher’s suggested approach- Derivative of a Linear Term with Combined Constants
For any constant coefficient , .
Group the entire numerical and symbolic prefactor together as a single constant before taking the time derivative.
- Physical Constraint Sanity Check
Problem statements often define parameters as positive constants ().
Whenever your final calculated parameter is negative (like ), immediately check earlier derivative and sign steps.
CORRECTED PATH
ACEpath Teacher's DemonstrationTake the derivative: .
Substitute : , which simplifies to .
Subtract the simplified velocity equation from : .
Substitute into : .
,
02 The student treats the subtraction in -c₂t² as addition during differentiation, obtaining an erroneous positive value for c₂.
Sample Student Work
Reviewed by ACEpath TeacherStep-by-Step Review
Walk Through It with Your Teacher- Step 1Correct
In the given function , the second term has a negative sign. Differentiating with respect to gives , not .
- Step 2Correct
Your substitution and reduction steps were algebraically sound, but the system inherited the sign error from Step 1.
- Step 3Correct
You solved the linear system correctly based on your equations, but the propagated sign error yielded incorrect numerical values for and .
WHAT YOU DID WELL
Compliments from Your TeacherYou correctly recognized that and .
You applied the power rule correctly to each individual variable term.
You solved the system of linear equations systematically and attached the correct SI units to both constants.
THE ERROR
Where Your ACEpath Teacher Spotted the MistakeYou copied the subtraction between terms as addition when finding and .
WHY IT HAPPENED
ACEpath Teacher's DiagnosisOverlooking term signs when differentiating polynomial functions term-by-term: .
REASONING PATH
Your ACEpath teacher’s suggested approach- Preserve Sign in Difference Rule
By the difference rule of calculus, .
Always copy the sign preceding each term into its derivative before applying the power rule.
CORRECTED PATH
ACEpath Teacher's DemonstrationSet up the system with correct signs: and .
Subtract the first equation from the second: .
Solve for : .
Substitute back to find : .
,
03 The student forgets to multiply by the exponent 3 when differentiating the cubic term c₃t³, resulting in an incorrect angular velocity formula.
Sample Student Work
Reviewed by ACEpath TeacherStep-by-Step Review
Walk Through It with Your Teacher- Step 1Correct
When applying the power rule to , the exponent must be multiplied by the coefficient, yielding instead of .
- Step 2Correct
Your algebraic substitution at and linear reduction were mathematically sound, but they used your incorrect expressions for and .
- Step 3Correct
You solved the linear system correctly based on your reduced equations, but the value is inaccurate due to the earlier derivative error.
- Step 4Correct
You correctly back-substituted into your equation for . Notice that the negative result conflicts with the problem statement that is a positive physical constant, which is a great clue to check previous derivatives.
WHAT YOU DID WELL
Compliments from Your TeacherYou correctly recognized that angular velocity is the first time derivative of angular position and that angular acceleration is the second time derivative.
You accurately substituted and the given sensor measurements into your derived expressions.
You solved the resulting system of two linear equations using valid elimination and back-substitution techniques.
THE ERROR
Where Your ACEpath Teacher Spotted the MistakeYou dropped the coefficient when taking the derivative of , reducing the exponent to without multiplying the term by .
WHY IT HAPPENED
ACEpath Teacher's DiagnosisIncomplete application of the power rule on the leading polynomial term.
REASONING PATH
Your ACEpath teacher’s suggested approach- Power Rule Verification
For any monomial term , the derivative with respect to is .
Always multiply the existing coefficient by the original power before reducing the exponent by .
- Physical Constraint Check
Model parameters stated as positive constants must yield positive values.
If your final value is negative (like ), pause and trace your work backwards to find where a sign or coefficient error occurred.
CORRECTED PATH
ACEpath Teacher's DemonstrationDifferentiate correctly: .
Differentiate to obtain : .
Substitute : , giving .
Substitute into acceleration: , giving .
Subtract the two simplified equations: .
Substitute back to find : .
Lock it in
What is the time derivative of , where and are constant parameters?
. By the constant multiple rule, the derivative of a linear term with respect to retains all numerical and symbolic factors.
Similar question
A rotating disk has an angular position given by , where and are constants. Write expressions for its angular velocity and angular acceleration in terms of and .
Answer
Differentiating once: . Differentiating a second time: .
A centrifuge follows the angular position model . At , its angular velocity is and its angular acceleration is . Determine the values of and .
Answer
. . Subtracting gives . Then .
A turbine blade's position is modeled by . At , the instantaneous angular acceleration is and the angular jerk is . Find and .
Answer
, , and . At : and . Multiply the jerk equation by : . Subtracting gives . Then .