Resources

A driver in an autonomous vehicle traveling along a straight highway at a constant velocity of v0=28.0 m/sv_0 = 28.0\text{ m/s} detects a stalled truck at a fixed distance D=85.0 mD = 85.0\text{ m} directly ahead. After an automated system latency (reaction time) of treact=0.450 st_{\text{react}} = 0.450\text{ s} during which velocity remains constant, the vehicle engages maximum emergency braking with constant acceleration −amax⁡-a_{\max}. Determine the critical threshold value of amax⁡a_{\max} required to avoid a collision (i.e., bringing the vehicle to rest just before contacting the truck).

Answer and steps

Final answer

amax⁡=5.42 m/s2a_{\max} = 5.42\text{ m/s}^2

Steps

01

Calculate the distance traveled during the reaction phase

To find the minimum acceleration magnitude amax⁡a_{\max} required to avoid a collision, we divide the motion of the vehicle into two distinct stages: the reaction (latency) phase at constant velocity, and the braking phase with uniform deceleration.

During the system latency time treactt_{\text{react}}, the vehicle continues to move at its initial constant velocity v0=28.0 m/sv_0 = 28.0\text{ m/s}. The distance covered during this phase is:

dreact=v0⋅treactd_{\text{react}} = v_0 \cdot t_{\text{react}}

Substitute the given values:

dreact=(28.0 m/s)(0.450 s)=12.6 md_{\text{react}} = (28.0\text{ m/s})(0.450\text{ s}) = 12.6\text{ m}


02

Determine the remaining distance available for braking

The initial separation between the vehicle and the stalled truck is D=85.0 mD = 85.0\text{ m}. After covering dreactd_{\text{react}}, the remaining distance dbraked_{\text{brake}} available to bring the vehicle to rest is:

dbrake=D−dreactd_{\text{brake}} = D - d_{\text{react}}

dbrake=85.0 m−12.6 m=72.4 md_{\text{brake}} = 85.0\text{ m} - 12.6\text{ m} = 72.4\text{ m}


03

Apply the kinematic equation for the braking phase

During emergency braking, the vehicle undergoes constant acceleration a=−amax⁡a = -a_{\max}, starting from v0=28.0 m/sv_0 = 28.0\text{ m/s} and coming to a complete stop (vf=0 m/sv_f = 0\text{ m/s}) over the distance dbraked_{\text{brake}}.

Using the time-independent kinematic equation:

vf2=v02−2amax⁡dbrakev_f^2 = v_0^2 - 2a_{\max} d_{\text{brake}}

Set vf=0v_f = 0 to represent the critical condition where the vehicle stops just before the truck:

0=v02−2amax⁡dbrake0 = v_0^2 - 2a_{\max} d_{\text{brake}}

Rearranging for amax⁡a_{\max}:

amax⁡=v022dbrakea_{\max} = \frac{v_0^2}{2 d_{\text{brake}}}

Substitute the values:

amax⁡=(28.0 m/s)22(72.4 m)=784 m2/s2144.8 m≈5.414 m/s2a_{\max} = \frac{(28.0\text{ m/s})^2}{2(72.4\text{ m})} = \frac{784\text{ m}^2/\text{s}^2}{144.8\text{ m}} \approx 5.414\text{ m/s}^2


04

Critical threshold condition

To ensure that the stopping distance does not exceed 72.4 m72.4\text{ m} and safely prevent an impact, the deceleration magnitude must satisfy amax⁡≥5.414 m/s2a_{\max} \ge 5.414\text{ m/s}^2.

Rounding to guarantee safety at three significant figures gives the critical threshold value:

amax⁡=5.42 m/s2a_{\max} = 5.42\text{ m/s}^2

Typical errors

OverviewACEpath Teacher's Diagnosis

01 The student forgets to account for the reaction distance during latency and assumes the entire distance of 85.0 m is available for braking.

Sample Student Work

Reviewed by ACEpath Teacher
Step-by-Step Review
Walk Through It with Your Teacher
Incorrect
  1. Step 1

    vf2=v02−2⋅amax⁡⋅D  ⟹  0=28.02−2⋅amax⁡⋅85.0v_f^2 = v_0^2 - 2 \cdot a_{\max} \cdot D \implies 0 = 28.0^2 - 2 \cdot a_{\max} \cdot 85.0

    Correct

    dreact=v0treact=(28.0)(0.450)=12.6 m  ⟹  dbrake=85.0−12.6=72.4 m  ⟹  0=28.02−2amax⁡(72.4)d_{\text{react}} = v_0 t_{\text{react}} = (28.0)(0.450) = 12.6\text{ m} \implies d_{\text{brake}} = 85.0 - 12.6 = 72.4\text{ m} \implies 0 = 28.0^2 - 2 a_{\max}(72.4)

    You used the total distance D=85.0 mD = 85.0\text{ m} as the braking distance. Because the vehicle continues at constant velocity during the latency period treact=0.450 st_{\text{react}} = 0.450\text{ s}, it covers 12.6 m12.6\text{ m} before braking starts, leaving only 72.4 m72.4\text{ m} for deceleration.

  2. Step 2

    784=170.0⋅amax⁡  ⟹  amax⁡=784170.0784 = 170.0 \cdot a_{\max} \implies a_{\max} = \frac{784}{170.0}

    Correct

    784=144.8⋅amax⁡  ⟹  amax⁡=784144.8784 = 144.8 \cdot a_{\max} \implies a_{\max} = \frac{784}{144.8}

    Your algebraic rearrangement and equation isolation steps were executed cleanly, but the numerical coefficient reflects the unadjusted total distance.

  3. Step 3

    amax⁡=4.61 m/s2a_{\max} = 4.61\text{ m/s}^2

    Correct

    amax⁡=5.42 m/s2a_{\max} = 5.42\text{ m/s}^2

    Your final numerical answer is underestimated due to the omitted reaction distance in the first step.

WHAT YOU DID WELL
Compliments from Your Teacher

You selected the appropriate kinematic relationship connecting initial velocity, final velocity, acceleration, and displacement.

You correctly recognized that coming to rest means setting vf=0v_f = 0.

You performed the algebraic isolation and division accurately.

THE ERROR
Where Your ACEpath Teacher Spotted the Mistake
Omitted reaction phase distance

no

WHY IT HAPPENED
ACEpath Teacher's Diagnosis

You treated the problem as a single uniform deceleration stage over the entire separation distance, overlooking that stopping problems with a reaction delay consist of two distinct kinematic regimes: constant-velocity travel followed by decelerated braking.

REASONING PATH
Your ACEpath teacher’s suggested approach
Split Multi-Phase Motion
  • Total stopping distance equals reaction distance plus braking distance: dtotal=v0treact+dbraked_{\text{total}} = v_0 t_{\text{react}} + d_{\text{brake}}.

  • Always calculate the reaction displacement dreact=v0treactd_{\text{react}} = v_0 t_{\text{react}} first and subtract it from the total available clearance before setting up deceleration equations.

CORRECTED PATH
ACEpath Teacher's Demonstration
  1. Find the distance covered during system latency: dreact=v0treact=(28.0 m/s)(0.450 s)=12.6 md_{\text{react}} = v_0 t_{\text{react}} = (28.0\text{ m/s})(0.450\text{ s}) = 12.6\text{ m}.

  2. Determine the remaining stopping distance available for braking: dbrake=85.0 m−12.6 m=72.4 md_{\text{brake}} = 85.0\text{ m} - 12.6\text{ m} = 72.4\text{ m}.

  3. Apply the kinematic equation to the braking stage: 0=v02−2amax⁡dbrake  ⟹  amax⁡=v022dbrake0 = v_0^2 - 2 a_{\max} d_{\text{brake}} \implies a_{\max} = \frac{v_0^2}{2 d_{\text{brake}}}.

  4. Substitute numerical values: amax⁡=28.022(72.4)=784144.8≈5.414 m/s2a_{\max} = \frac{28.0^2}{2(72.4)} = \frac{784}{144.8} \approx 5.414\text{ m/s}^2.

Final answer

amax⁡=5.42 m/s2a_{\max} = 5.42\text{ m/s}^2

NEXT STEPS
Final Takeaways from Your Teacher
  • Sketch a two-segment timeline or distance bar diagram whenever reaction time or latency is mentioned.

  • Check each segment for whether acceleration is zero (a=0a=0) or non-zero before applying kinematic formulas.

OverviewACEpath Teacher's Diagnosis

02 The student omits the factor of 2 in the denominator of the kinematic stopping formula, using a = v² / d instead of v² / (2d).

Sample Student Work

Reviewed by ACEpath Teacher
Step-by-Step Review
Walk Through It with Your Teacher
Incorrect
  1. Step 1

    dreact=28.0×0.450=12.6 md_{\text{react}} = 28.0 \times 0.450 = 12.6\text{ m}

  2. Step 2

    dbrake=85.0−12.6=72.4 md_{\text{brake}} = 85.0 - 12.6 = 72.4\text{ m}

  3. Step 3

    amax⁡=v02dbrake  ⟹  amax⁡=28.0272.4a_{\max} = \frac{v_0^2}{d_{\text{brake}}} \implies a_{\max} = \frac{28.0^2}{72.4}

    Correct

    vf2=v02−2amax⁡dbrake  ⟹  amax⁡=v022dbrake=28.022(72.4)v_f^2 = v_0^2 - 2a_{\max}d_{\text{brake}} \implies a_{\max} = \frac{v_0^2}{2d_{\text{brake}}} = \frac{28.0^2}{2(72.4)}

    You omitted the factor of 22 in the denominator. From the kinematic relation vf2=v02+2adv_f^2 = v_0^2 + 2ad with vf=0v_f = 0 and a=−amax⁡a = -a_{\max}, the stopping acceleration magnitude is amax⁡=v022da_{\max} = \frac{v_0^2}{2d}, not v02d\frac{v_0^2}{d}.

  4. Step 4

    amax⁡=78472.4=10.83 m/s2a_{\max} = \frac{784}{72.4} = 10.83\text{ m/s}^2

    Correct

    amax⁡=784144.8≈5.42 m/s2a_{\max} = \frac{784}{144.8} \approx 5.42\text{ m/s}^2

    Your arithmetic evaluation was consistent with your formula, but the resulting numerical value is doubled due to the missing factor of 22 in the denominator.

WHAT YOU DID WELL
Compliments from Your Teacher

You split the problem cleanly into a constant-velocity reaction stage and a constant-acceleration braking stage.

You accurately computed the distance traveled during the reaction phase.

You correctly calculated the remaining stopping distance.

THE ERROR
Where Your ACEpath Teacher Spotted the Mistake
Omitted factor of 2 in kinematic stopping formula

You set a=v02da = \frac{v_0^2}{d} instead of a=v022da = \frac{v_0^2}{2d}, likely confusing the linear kinematic stopping relation with the formula for centripetal acceleration (ac=v2ra_c = \frac{v^2}{r}) or omitting the coefficient from v2−v02=2aΔxv^2 - v_0^2 = 2a\Delta x.

WHY IT HAPPENED
ACEpath Teacher's Diagnosis

Incomplete derivation or recall of the time-independent kinematic equation vf2=v02+2aΔxv_f^2 = v_0^2 + 2a\Delta x. When solving for acceleration without time, the constant factor of 22 originates directly from the integration of velocity with respect to displacement (or the work-energy theorem W=ΔK=12mv2W = \Delta K = \frac{1}{2}m v^2).

REASONING PATH
Your ACEpath teacher’s suggested approach
Time-Independent Kinematic Formula
  • For uniform acceleration over displacement Δx\Delta x, vf2=v02+2aΔxv_f^2 = v_0^2 + 2a\Delta x.

  • Always write down the full kinematic equation before isolating the target variable, making sure the coefficient 22 is preserved.

Work-Energy Sanity Check
  • Net work equals change in kinetic energy: Fnetd=mad=12mv02F_{\text{net}} d = m a d = \frac{1}{2} m v_0^2.

  • Notice that dividing by mm gives ad=12v02a d = \frac{1}{2} v_0^2, which immediately shows why a=v022da = \frac{v_0^2}{2d} must contain a factor of 22.

CORRECTED PATH
ACEpath Teacher's Demonstration
  1. Set vf=0 m/sv_f = 0\text{ m/s} in vf2=v02−2amax⁡dbrakev_f^2 = v_0^2 - 2a_{\max} d_{\text{brake}}: 0=(28.0)2−2amax⁡(72.4)0 = (28.0)^2 - 2 a_{\max} (72.4)

  2. Solve for amax⁡a_{\max}: amax⁡=(28.0)22×72.4=784144.8a_{\max} = \frac{(28.0)^2}{2 \times 72.4} = \frac{784}{144.8}

  3. Evaluate the quotient: amax⁡≈5.414 m/s2a_{\max} \approx 5.414\text{ m/s}^2

Final answer

amax⁡=5.42 m/s2a_{\max} = 5.42\text{ m/s}^2

NEXT STEPS
Final Takeaways from Your Teacher
  • Review the derivation of v2=v02+2aΔxv^2 = v_0^2 + 2a\Delta x from average velocity and definition of acceleration.

  • Practice deriving stopping distance d=v22ad = \frac{v^2}{2a} using both kinematics and the work-energy theorem.

  • Solve the targeted practice exercises below to reinforce using the correct denominator factor.

OverviewACEpath Teacher's Diagnosis

03 The student forgets to square the initial velocity when using the kinematic equation, calculating a = v / (2d).

Sample Student Work

Reviewed by ACEpath Teacher
Step-by-Step Review
Walk Through It with Your Teacher
Partially correct
  1. Step 1

    dreact=28.0×0.450=12.6 md_{\text{react}} = 28.0 \times 0.450 = 12.6\text{ m}

  2. Step 2

    dbrake=85.0−12.6=72.4 md_{\text{brake}} = 85.0 - 12.6 = 72.4\text{ m}

  3. Step 3

    amax⁡=v02⋅dbrake  ⟹  amax⁡=28.02⋅72.4a_{\max} = \frac{v_0}{2 \cdot d_{\text{brake}}} \implies a_{\max} = \frac{28.0}{2 \cdot 72.4}

    Correct

    amax⁡=v022dbrake=(28.0)22(72.4)a_{\max} = \frac{v_0^2}{2 d_{\text{brake}}} = \frac{(28.0)^2}{2(72.4)}

    The time-independent kinematic relation is vf2=v02−2adv_f^2 = v_0^2 - 2a d. Setting vf=0v_f = 0 yields a=v022da = \frac{v_0^2}{2d}, so the initial velocity must be squared.

  4. Step 4

    amax⁡=28.0144.8=0.193 m/s2a_{\max} = \frac{28.0}{144.8} = 0.193\text{ m/s}^2

    Correct

    amax⁡=784144.8≈5.42 m/s2a_{\max} = \frac{784}{144.8} \approx 5.42\text{ m/s}^2

    This calculation followed directly from the unsquared velocity in Step 3.

WHAT YOU DID WELL
Compliments from Your Teacher

You correctly modeled the reaction phase as motion at constant velocity.

You accurately calculated the remaining distance available for braking before collision.

THE ERROR
Where Your ACEpath Teacher Spotted the Mistake
Omitted Velocity Exponent in Kinematic Equation

You wrote v0v_0 instead of v02v_0^2 in the numerator when solving for stopping acceleration from vf2=v02+2adv_f^2 = v_0^2 + 2ad.

WHY IT HAPPENED
ACEpath Teacher's Diagnosis

You relied on an incomplete algebraic rearrangement of the time-independent kinematic equation without verifying dimensional consistency, confusing velocity vv with squared velocity v2v^2.

REASONING PATH
Your ACEpath teacher’s suggested approach
Derive from the Base Equation
  • Start directly from vf2=v02+2adv_f^2 = v_0^2 + 2ad rather than recalling the isolated acceleration formula from memory.

  • Substitute vf=0v_f = 0 to get 0=v02−2ad0 = v_0^2 - 2a d, which isolates to a=v022da = \frac{v_0^2}{2d}.

Dimensional Analysis Check
  • Acceleration must have units of m/s2\text{m/s}^2.

  • Notice that vd\frac{v}{d} has units of m/sm=s−1\frac{\text{m/s}}{\text{m}} = \text{s}^{-1}, whereas v2d\frac{v^2}{d} gives m2/s2m=m/s2\frac{\text{m}^2/\text{s}^2}{\text{m}} = \text{m/s}^2.

CORRECTED PATH
ACEpath Teacher's Demonstration
  1. Recall the time-independent kinematic equation: vf2=v02−2amax⁡dbrakev_f^2 = v_0^2 - 2a_{\max} d_{\text{brake}}

  2. Set vf=0 m/sv_f = 0\text{ m/s} for the stopping threshold: 0=(28.0 m/s)2−2amax⁡(72.4 m)0 = (28.0\text{ m/s})^2 - 2 a_{\max} (72.4\text{ m})

  3. Solve for amax⁡a_{\max}: amax⁡=(28.0 m/s)22(72.4 m)=784 m2/s2144.8 m≈5.414 m/s2a_{\max} = \frac{(28.0\text{ m/s})^2}{2(72.4\text{ m})} = \frac{784\text{ m}^2/\text{s}^2}{144.8\text{ m}} \approx 5.414\text{ m/s}^2

  4. Round to three significant figures to ensure no collision: amax⁡=5.42 m/s2a_{\max} = 5.42\text{ m/s}^2

Final answer

amax⁡=5.42 m/s2a_{\max} = 5.42\text{ m/s}^2

NEXT STEPS
Final Takeaways from Your Teacher
  • Always write out vf2=v02+2aΔxv_f^2 = v_0^2 + 2a\Delta x before isolating variables to avoid dropping exponents.

  • Perform a quick dimensional check on isolated expressions: ensure your numerator for acceleration has units of velocity squared.

Lock it in

Similar question

01

A motorist driving at 25.0 m/s25.0\text{ m/s} spots a roadblock 70.0 m70.0\text{ m} ahead. If the driver takes 0.800 s0.800\text{ s} to react before hitting the brakes, what minimum constant deceleration magnitude is needed to stop before the roadblock?

Answer

6.25 m/s26.25\text{ m/s}^2. Reaction distance: dreact=(25.0)(0.800)=20.0 md_{\text{react}} = (25.0)(0.800) = 20.0\text{ m}. Remaining braking distance: dbrake=70.0−20.0=50.0 md_{\text{brake}} = 70.0 - 20.0 = 50.0\text{ m}. Acceleration: a=v022dbrake=25.022(50.0)=6.25 m/s2a = \frac{v_0^2}{2 d_{\text{brake}}} = \frac{25.0^2}{2(50.0)} = 6.25\text{ m/s}^2.

02

A train travels at 30.0 m/s30.0\text{ m/s}. The engineer spots a debris pile 150 m150\text{ m} ahead. The braking mechanism has an activation delay of 1.20 s1.20\text{ s}, after which the train decelerates at a maximum rate of 3.50 m/s23.50\text{ m/s}^2. Does the train stop in time, and what is its total stopping distance?

Answer

Yes, stopping distance is 164.6 m164.6\text{ m}, so it actually collides! Delay distance: ddelay=(30.0)(1.20)=36.0 md_{\text{delay}} = (30.0)(1.20) = 36.0\text{ m}. Braking distance: dbrake=30.022(3.50)=128.6 md_{\text{brake}} = \frac{30.0^2}{2(3.50)} = 128.6\text{ m}. Total distance: 36.0+128.6=164.6 m>150 m36.0 + 128.6 = 164.6\text{ m} > 150\text{ m}, so the train cannot stop in time.

03

An automated delivery cart traveling at v0v_0 has an emergency stopping distance limit of D=18.0 mD = 18.0\text{ m}. The onboard computer latency is 0.300 s0.300\text{ s}, and the maximum available deceleration is 4.00 m/s24.00\text{ m/s}^2. Determine the maximum safe operating speed v0v_0 to avoid colliding with an unexpected barrier at distance DD.

Answer

10.8 m/s10.8\text{ m/s}. Total distance equation: v0treact+v022a≤D  ⟹  0.300v0+v028.00=18.0v_0 t_{\text{react}} + \frac{v_0^2}{2a} \le D \implies 0.300 v_0 + \frac{v_0^2}{8.00} = 18.0. Multiply by 8: v02+2.40v0−144=0v_0^2 + 2.40 v_0 - 144 = 0. Solving the quadratic yields v0=−2.40+2.402−4(1)(−144)2≈10.8 m/sv_0 = \frac{-2.40 + \sqrt{2.40^2 - 4(1)(-144)}}{2} \approx 10.8\text{ m/s}.

Loading workspace…