Resources

A motorized pulley initially spinning counterclockwise (defined as the positive angular direction) is subjected to an electronically controlled braking torque at t=0 st = 0\text{ s}. Its angular position is modeled by θ(t)=(18.0 rad/s)t−(3.00 rad/s2)t2\theta(t) = (18.0\text{ rad/s})t - (3.00\text{ rad/s}^2)t^2. Stating signs explicitly: (a) determine the sign and magnitude of the instantaneous angular velocity ω\omega and angular acceleration α\alpha at t=1.00 st = 1.00\text{ s} and state whether the pulley is speeding up or slowing down; (b) determine the sign and magnitude of ω\omega and α\alpha at t=5.00 st = 5.00\text{ s} and state whether the pulley is speeding up or slowing down.

Answer and steps

Final answer

(a) ω(1.00 s)=+12.0 rad/s\omega(1.00\text{ s}) = +12.0\text{ rad/s}, α(1.00 s)=−6.00 rad/s2\alpha(1.00\text{ s}) = -6.00\text{ rad/s}^2 (slowing down because ω\omega and α\alpha have opposite signs); (b) ω(5.00 s)=−12.0 rad/s\omega(5.00\text{ s}) = -12.0\text{ rad/s}, α(5.00 s)=−6.00 rad/s2\alpha(5.00\text{ s}) = -6.00\text{ rad/s}^2 (speeding up in the clockwise direction because ω\omega and α\alpha have the same sign)

Steps

01

Derive the Expressions for Angular Velocity and Angular Acceleration

The angular position is given as a function of time: θ(t)=18.0t−3.00t2\theta(t) = 18.0t - 3.00t^2

  • Angular velocity ω(t)\omega(t) is the first time derivative of angular position: ω(t)=dθdt=ddt(18.0t−3.00t2)=18.0−6.00t\omega(t) = \frac{d\theta}{dt} = \frac{d}{dt}\left(18.0t - 3.00t^2\right) = 18.0 - 6.00t
  • Angular acceleration α(t)\alpha(t) is the first time derivative of angular velocity (or second derivative of position): α(t)=dωdt=ddt(18.0−6.00t)=−6.00 rad/s2\alpha(t) = \frac{d\omega}{dt} = \frac{d}{dt}\left(18.0 - 6.00t\right) = -6.00\text{ rad/s}^2

The angular acceleration is constant: α(t)=−6.00 rad/s2\alpha(t) = -6.00\text{ rad/s}^2 for all tt.


02

Determine Kinematic Quantities at t=1.00 st = 1.00\text{ s}

Substitute t=1.00 st = 1.00\text{ s} into the equations for ω(t)\omega(t) and α(t)\alpha(t): ω(1.00 s)=18.0−6.00(1.00)=+12.0 rad/s\omega(1.00\text{ s}) = 18.0 - 6.00(1.00) = +12.0\text{ rad/s} α(1.00 s)=−6.00 rad/s2\alpha(1.00\text{ s}) = -6.00\text{ rad/s}^2

  • Motion state: ω\omega is positive (counterclockwise motion) while α\alpha is negative (clockwise torque/acceleration).
  • Because ω\omega and α\alpha have opposite signs, the angular acceleration opposes the angular velocity, so the pulley is slowing down.

03

Determine Kinematic Quantities at t=5.00 st = 5.00\text{ s}

Substitute t=5.00 st = 5.00\text{ s} into the equations: ω(5.00 s)=18.0−6.00(5.00)=18.0−30.0=−12.0 rad/s\omega(5.00\text{ s}) = 18.0 - 6.00(5.00) = 18.0 - 30.0 = -12.0\text{ rad/s} α(5.00 s)=−6.00 rad/s2\alpha(5.00\text{ s}) = -6.00\text{ rad/s}^2

  • Motion state: ω\omega is negative (the pulley has reversed and is spinning clockwise) and α\alpha is negative (clockwise acceleration).
  • Because ω\omega and α\alpha have the same sign, the angular acceleration acts in the direction of motion, so the pulley is speeding up (in the negative/clockwise direction).

Key Rule on Speeding Up vs. Slowing Down: An object speeds up whenever velocity and acceleration share the same sign (ω⋅α>0\omega \cdot \alpha > 0). It slows down whenever velocity and acceleration have opposite signs (ω⋅α<0\omega \cdot \alpha < 0), regardless of whether the sign of velocity itself is positive or negative.

Typical errors

OverviewACEpath Teacher's Diagnosis

01 The student forgets to multiply by the exponent when differentiating t², giving an incorrect coefficient for the acceleration term.

Sample Student Work

Reviewed by ACEpath Teacher
Step-by-Step Review
Walk Through It with Your Teacher
Incorrect
  1. Step 1

    ω(t)=dθdt=18.0−3.00t  ⟹  α(t)=dωdt=−3.00 rad/s2\omega(t) = \frac{d\theta}{dt} = 18.0 - 3.00t \implies \alpha(t) = \frac{d\omega}{dt} = -3.00\text{ rad/s}^2

    Correct

    ω(t)=dθdt=18.0−6.00t  ⟹  α(t)=dωdt=−6.00 rad/s2\omega(t) = \frac{d\theta}{dt} = 18.0 - 6.00t \implies \alpha(t) = \frac{d\omega}{dt} = -6.00\text{ rad/s}^2

    When applying the power rule ddt(tn)=ntn−1\frac{d}{dt}(t^n) = n t^{n-1} to the term −3.00t2-3.00 t^2, you must multiply the coefficient by the exponent 22, giving −6.00t-6.00t rather than −3.00t-3.00t.

  2. Step 2

    At t=1.00 s:ω(1.00)=18.0−3.00(1.00)=+15.0 rad/s, magnitude 15.0 rad/s  ⟹  α(1.00)=−3.00 rad/s2, magnitude 3.00 rad/s2  ⟹  Since ω>0 and α<0, the pulley is slowing down.\text{At } t = 1.00\text{ s}: \omega(1.00) = 18.0 - 3.00(1.00) = +15.0\text{ rad/s}, \text{ magnitude } 15.0\text{ rad/s} \implies \alpha(1.00) = -3.00\text{ rad/s}^2, \text{ magnitude } 3.00\text{ rad/s}^2 \implies \text{Since } \omega > 0 \text{ and } \alpha < 0, \text{ the pulley is slowing down.}

    Correct

    ω(1.00 s)=18.0−6.00(1.00)=+12.0 rad/s  ⟹  α(1.00 s)=−6.00 rad/s2  ⟹  Since ω>0 and α<0, the pulley is slowing down.\omega(1.00\text{ s}) = 18.0 - 6.00(1.00) = +12.0\text{ rad/s} \implies \alpha(1.00\text{ s}) = -6.00\text{ rad/s}^2 \implies \text{Since } \omega > 0 \text{ and } \alpha < 0, \text{ the pulley is slowing down.}

    Your reasoning that opposite signs indicate slowing down is completely correct, but the numerical values for ω\omega and α\alpha are affected by the earlier derivative error.

  3. Step 3

    At t=5.00 s:ω(5.00)=18.0−3.00(5.00)=+3.00 rad/s, magnitude 3.00 rad/s  ⟹  α(5.00)=−3.00 rad/s2, magnitude 3.00 rad/s2  ⟹  Since ω>0 and α<0, the pulley is slowing down.\text{At } t = 5.00\text{ s}: \omega(5.00) = 18.0 - 3.00(5.00) = +3.00\text{ rad/s}, \text{ magnitude } 3.00\text{ rad/s} \implies \alpha(5.00) = -3.00\text{ rad/s}^2, \text{ magnitude } 3.00\text{ rad/s}^2 \implies \text{Since } \omega > 0 \text{ and } \alpha < 0, \text{ the pulley is slowing down.}

    Correct

    ω(5.00 s)=18.0−6.00(5.00)=−12.0 rad/s  ⟹  α(5.00 s)=−6.00 rad/s2  ⟹  Since ω<0 and α<0, the pulley is speeding up (clockwise).\omega(5.00\text{ s}) = 18.0 - 6.00(5.00) = -12.0\text{ rad/s} \implies \alpha(5.00\text{ s}) = -6.00\text{ rad/s}^2 \implies \text{Since } \omega < 0 \text{ and } \alpha < 0, \text{ the pulley is speeding up (clockwise).}

    Using the correct expression yields ω(5.00)=−12.0 rad/s\omega(5.00) = -12.0\text{ rad/s}. Because both ω\omega and α\alpha are negative, they share the same sign, which means the pulley has reversed direction and is speeding up clockwise.

WHAT YOU DID WELL
Compliments from Your Teacher

You correctly identified that angular velocity is the first time derivative of angular position and angular acceleration is the derivative of angular velocity.

You correctly articulated that an object slows down when angular velocity and angular acceleration have opposite signs.

THE ERROR
Where Your ACEpath Teacher Spotted the Mistake
Power rule differentiation slip on quadratic position term

You reduced the power of t2t^2 to tt without multiplying the coefficient 3.003.00 by the exponent 22.

WHY IT HAPPENED
ACEpath Teacher's Diagnosis

Incomplete execution of the calculus power rule ddt(ctn)=c⋅n⋅tn−1\frac{d}{dt}(c t^n) = c \cdot n \cdot t^{n-1}, treating ddt(3.00t2)\frac{d}{dt}(3.00t^2) as 3.00t3.00t instead of 2(3.00)t=6.00t2(3.00)t = 6.00t.

REASONING PATH
Your ACEpath teacher’s suggested approach
Power Rule for Derivatives
  • ddt(ctn)=c⋅n⋅tn−1\frac{d}{dt}\left(c t^n\right) = c \cdot n \cdot t^{n-1}

  • Bring the exponent down as a multiplier before lowering the power by one: ddt(3.00t2)=3.00⋅2t=6.00t\frac{d}{dt}(3.00t^2) = 3.00 \cdot 2t = 6.00t.

Speeding Up vs. Slowing Down Test
  • Speeding up occurs when ω⋅α>0\omega \cdot \alpha > 0 (same sign); slowing down occurs when ω⋅α<0\omega \cdot \alpha < 0 (opposite signs).

  • Always evaluate both signs independently at the specific instant: if both are negative, the object is speeding up in the negative direction.

CORRECTED PATH
ACEpath Teacher's Demonstration
  1. Differentiate θ(t)=18.0t−3.00t2\theta(t) = 18.0t - 3.00t^2 properly: ω(t)=dθdt=18.0−2(3.00)t=18.0−6.00t\omega(t) = \frac{d\theta}{dt} = 18.0 - 2(3.00)t = 18.0 - 6.00t.

  2. Differentiate again to obtain angular acceleration: α(t)=dωdt=−6.00 rad/s2\alpha(t) = \frac{d\omega}{dt} = -6.00\text{ rad/s}^2.

  3. Evaluate at t=1.00 st = 1.00\text{ s}: ω(1.00)=18.0−6.00(1.00)=+12.0 rad/s\omega(1.00) = 18.0 - 6.00(1.00) = +12.0\text{ rad/s}, α(1.00)=−6.00 rad/s2\alpha(1.00) = -6.00\text{ rad/s}^2. Since signs are opposite (+12.0+12.0 and −6.00-6.00), the pulley is slowing down.

  4. Evaluate at t=5.00 st = 5.00\text{ s}: ω(5.00)=18.0−6.00(5.00)=−12.0 rad/s\omega(5.00) = 18.0 - 6.00(5.00) = -12.0\text{ rad/s}, α(5.00)=−6.00 rad/s2\alpha(5.00) = -6.00\text{ rad/s}^2. Since both signs are negative, the pulley is speeding up in the clockwise direction.

Final answer

(a) ω=+12.0 rad/s\omega = +12.0\text{ rad/s} (magnitude 12.0 rad/s12.0\text{ rad/s}), α=−6.00 rad/s2\alpha = -6.00\text{ rad/s}^2 (magnitude 6.00 rad/s26.00\text{ rad/s}^2), slowing down; (b) ω=−12.0 rad/s\omega = -12.0\text{ rad/s} (magnitude 12.0 rad/s12.0\text{ rad/s}), α=−6.00 rad/s2\alpha = -6.00\text{ rad/s}^2 (magnitude 6.00 rad/s26.00\text{ rad/s}^2), speeding up.

NEXT STEPS
Final Takeaways from Your Teacher
  • Double-check algebraic differentiation by writing out the step ddt(at2)=2at\frac{d}{dt}(a t^2) = 2at explicitly before simplifying.

  • Remember that a negative angular acceleration does not automatically mean 'slowing down'—it depends entirely on whether the sign matches that of ω\omega.

OverviewACEpath Teacher's Diagnosis

02 The student assumes that a negative angular acceleration always implies slowing down, regardless of the sign of the angular velocity.

Sample Student Work

Reviewed by ACEpath Teacher
Step-by-Step Review
Walk Through It with Your Teacher
Partially correct
  1. Step 1

    ω(t)=18.0−6.00t  ⟹  α(t)=−6.00 rad/s2\omega(t) = 18.0 - 6.00t \implies \alpha(t) = -6.00\text{ rad/s}^2

  2. Step 2

    ω(1.00)=+12.0 rad/s\omega(1.00) = +12.0\text{ rad/s}, α(1.00)=−6.00 rad/s2  ⟹  \alpha(1.00) = -6.00\text{ rad/s}^2 \implies slowing down

  3. Step 3

    ω(5.00)=−12.0 rad/s\omega(5.00) = -12.0\text{ rad/s}, α(5.00)=−6.00 rad/s2  ⟹  \alpha(5.00) = -6.00\text{ rad/s}^2 \implies Since α\alpha is negative, the pulley is slowing down.

    Correct

    ω(5.00)=−12.0 rad/s\omega(5.00) = -12.0\text{ rad/s}, α(5.00)=−6.00 rad/s2\alpha(5.00) = -6.00\text{ rad/s}^2; speeding up (in the clockwise direction) because ω\omega and α\alpha have the same sign

    You evaluated ω(5.00 s)\omega(5.00\text{ s}) and α(5.00 s)\alpha(5.00\text{ s}) correctly, but because both are negative, the angular acceleration acts in the same direction as the angular velocity, meaning the pulley is actually speeding up in the clockwise direction.

WHAT YOU DID WELL
Compliments from Your Teacher

You differentiated the angular position polynomial correctly to find both ω(t)\omega(t) and α(t)\alpha(t).

You correctly substituted the time values and calculated the signs and magnitudes of ω\omega and α\alpha at both instants.

You explicitly stated both signs and magnitudes as requested by the problem prompt.

THE ERROR
Where Your ACEpath Teacher Spotted the Mistake
Equating negative acceleration with slowing down

none

WHY IT HAPPENED
ACEpath Teacher's Diagnosis

You treated negative angular acceleration as an absolute synonym for 'slowing down' (deceleration) without checking the relative sign of the angular velocity ω\omega. An object speeds up whenever velocity and acceleration share the same sign (ω⋅α>0\omega \cdot \alpha > 0) and slows down only when they oppose each other (ω⋅α<0\omega \cdot \alpha < 0).

REASONING PATH
Your ACEpath teacher’s suggested approach
Speeding Up vs. Slowing Down Condition
  • An object speeds up when ω\omega and α\alpha have the same sign (ω⋅α>0\omega \cdot \alpha > 0). It slows down when ω\omega and α\alpha have opposite signs (ω⋅α<0\omega \cdot \alpha < 0).

  • Always compare the sign of ω\omega with the sign of α\alpha; never decide whether an object is speeding up or slowing down from the sign of α\alpha alone.

CORRECTED PATH
ACEpath Teacher's Demonstration
  1. At t=5.00 st = 5.00\text{ s}, you have ω=−12.0 rad/s\omega = -12.0\text{ rad/s} and α=−6.00 rad/s2\alpha = -6.00\text{ rad/s}^2.

  2. Compute their product: ω⋅α=(−12.0)(−6.00)=+72.0>0\omega \cdot \alpha = (-12.0)(-6.00) = +72.0 > 0, meaning both quantities point in the clockwise direction.

  3. Because acceleration acts in the direction of motion, the magnitude of angular velocity is increasing.

Final answer

At t=5.00 st = 5.00\text{ s}, the pulley is speeding up in the clockwise direction.

NEXT STEPS
Final Takeaways from Your Teacher
  • Write down the relative sign rule sign(ω)×sign(α)\text{sign}(\omega) \times \text{sign}(\alpha) on your formula sheet.

  • Practice checking both 1D linear velocity/acceleration problems and rotational problems where both quantities are negative.

OverviewACEpath Teacher's Diagnosis

03 The student misinterprets a negative angular velocity at t = 5.00 s as slowing down because the value is less than zero.

Sample Student Work

Reviewed by ACEpath Teacher
Step-by-Step Review
Walk Through It with Your Teacher
Partially correct
  1. Step 1

    ω(t)=18.0−6.00t  ⟹  α(t)=−6.00 rad/s2\omega(t) = 18.0 - 6.00t \implies \alpha(t) = -6.00\text{ rad/s}^2

  2. Step 2

    At t=1.00 s: ω=+12.0 rad/s (positive, mag 12.0 rad/s),α=−6.00 rad/s2 (negative, mag 6.00 rad/s2)  ⟹  ω and α have opposite signs, so it is slowing down.\text{At } t = 1.00\text{ s: } \omega = +12.0\text{ rad/s}\text{ (positive, mag } 12.0\text{ rad/s}), \alpha = -6.00\text{ rad/s}^2\text{ (negative, mag } 6.00\text{ rad/s}^2) \implies \omega\text{ and }\alpha\text{ have opposite signs, so it is slowing down.}

  3. Step 3

    At t=5.00 s: ω=18.0−30.0=−12.0 rad/s (negative, mag 12.0 rad/s),α=−6.00 rad/s2 (negative, mag 6.00 rad/s2)\text{At } t = 5.00\text{ s: } \omega = 18.0 - 30.0 = -12.0\text{ rad/s}\text{ (negative, mag } 12.0\text{ rad/s}), \alpha = -6.00\text{ rad/s}^2\text{ (negative, mag } 6.00\text{ rad/s}^2)

  4. Step 4

    Because angular velocity is negative, the pulley is slowing down.\text{Because angular velocity is negative, the pulley is slowing down.}

    Correct

    Because ω and α have the same sign (both negative), the pulley is speeding up.\text{Because } \omega\text{ and } \alpha\text{ have the same sign (both negative), the pulley is speeding up.}

    A negative angular velocity indicates clockwise rotation, not deceleration. Whether an object speeds up or slows down depends on whether ω\omega and α\alpha share the same sign (ω⋅α>0)(\omega \cdot \alpha > 0), not on the sign of ω\omega alone.

WHAT YOU DID WELL
Compliments from Your Teacher

You correctly calculated the first and second time derivatives of angular position.

You accurately substituted t=1.00 st = 1.00\text{ s} and t=5.00 st = 5.00\text{ s} to find magnitudes and signs.

You correctly used the sign comparison test for part (a) to deduce that the pulley is slowing down.

THE ERROR
Where Your ACEpath Teacher Spotted the Mistake
Sign-Speed Confusion in Rotational Kinematics

You equated a negative angular velocity value (ω<0)(\omega < 0) with a decreasing rotational speed.

WHY IT HAPPENED
ACEpath Teacher's Diagnosis

Treating the algebraic sign of velocity as an indicator of speeding up versus slowing down. In kinematics, sign indicates coordinate direction (counterclockwise vs. clockwise). Speed is the absolute magnitude ∣ω∣|\omega|. When acceleration and velocity point in the same direction, speed increases regardless of whether that direction is positive or negative.

REASONING PATH
Your ACEpath teacher’s suggested approach
Direction vs. Speed Change
  • The sign of ω\omega tells you the direction of rotation (++ counterclockwise, −- clockwise). The product ω⋅α\omega \cdot \alpha tells you whether speed is increasing or decreasing.

  • Always compare the sign of α\alpha with the sign of ω\omega rather than looking at ω\omega alone.

The Speeding Up Criterion
  • If ω\omega and α\alpha have the same sign (ω⋅α>0)(\omega \cdot \alpha > 0), the object is speeding up. If they have opposite signs (ω⋅α<0)(\omega \cdot \alpha < 0), it is slowing down.

  • Check: at t=5.00 st = 5.00\text{ s}, (−12.0)×(−6.00)=+72.0>0(-12.0) \times (-6.00) = +72.0 > 0, so ∣ω∣|\omega| is increasing.

CORRECTED PATH
ACEpath Teacher's Demonstration
  1. Identify the signs: ω<0\omega < 0 and α<0\alpha < 0.

  2. Compare their signs: ω\omega and α\alpha share the same sign (both negative), meaning angular acceleration pushes in the direction of rotational motion.

  3. Conclude: The magnitude ∣ω∣|\omega| is increasing from 12.0 rad/s12.0\text{ rad/s} onward, so the pulley is speeding up in the clockwise direction.

Final answer

(a) ω=+12.0 rad/s\omega = +12.0\text{ rad/s}, α=−6.00 rad/s2\alpha = -6.00\text{ rad/s}^2, slowing down; (b) ω=−12.0 rad/s\omega = -12.0\text{ rad/s}, α=−6.00 rad/s2\alpha = -6.00\text{ rad/s}^2, speeding up in the clockwise direction.

NEXT STEPS
Final Takeaways from Your Teacher
  • Review how 1D kinematics signs map to rotational motion: sign indicates direction, magnitude indicates speed.

  • Practice using the product ω⋅α\omega \cdot \alpha whenever asked whether a rotating body is speeding up or slowing down.

Lock it in

Similar question

01

The angular position of a flywheel is given by θ(t)=24.0t−4.00t2\theta(t) = 24.0t - 4.00t^2 (with θ\theta in radians and tt in seconds). Find the angular velocity ω\omega and angular acceleration α\alpha at t=2.00 st = 2.00\text{ s}, and determine whether the flywheel is speeding up or slowing down.

Answer

ω(t)=24.0−8.00t  ⟹  ω(2.00)=+8.00 rad/s\omega(t) = 24.0 - 8.00t \implies \omega(2.00) = +8.00\text{ rad/s}. α(t)=−8.00 rad/s2\alpha(t) = -8.00\text{ rad/s}^2. Since ω>0\omega > 0 and α<0\alpha < 0 have opposite signs, the flywheel is slowing down.

02

A disk rotates with angular position θ(t)=15.0t−2.50t2\theta(t) = 15.0t - 2.50t^2. Determine the instantaneous angular velocity ω\omega and angular acceleration α\alpha at t=4.00 st = 4.00\text{ s}, and state whether the disk is speeding up or slowing down.

Answer

ω(t)=15.0−5.00t  ⟹  ω(4.00)=15.0−20.0=−5.00 rad/s\omega(t) = 15.0 - 5.00t \implies \omega(4.00) = 15.0 - 20.0 = -5.00\text{ rad/s}. α(t)=−5.00 rad/s2\alpha(t) = -5.00\text{ rad/s}^2. Since both ω<0\omega < 0 and α<0\alpha < 0 are negative (same sign), the disk is speeding up in the clockwise direction.

03

A rotating turbine blade has angular position θ(t)=2.00t3−12.0t2+18.0t\theta(t) = 2.00t^3 - 12.0t^2 + 18.0t. (a) Determine expressions for ω(t)\omega(t) and α(t)\alpha(t). (b) At t=3.00 st = 3.00\text{ s}, find ω\omega and α\alpha, and state whether the turbine blade is speeding up, slowing down, or momentarily at rest.

Answer

(a) ω(t)=dθdt=6.00t2−24.0t+18.0\omega(t) = \frac{d\theta}{dt} = 6.00t^2 - 24.0t + 18.0; α(t)=dωdt=12.0t−24.0\alpha(t) = \frac{d\omega}{dt} = 12.0t - 24.0. (b) At t=3.00 st = 3.00\text{ s}: ω(3.00)=6.00(9)−24.0(3)+18.0=54.0−72.0+18.0=0 rad/s\omega(3.00) = 6.00(9) - 24.0(3) + 18.0 = 54.0 - 72.0 + 18.0 = 0\text{ rad/s}. α(3.00)=12.0(3.00)−24.0=+12.0 rad/s2\alpha(3.00) = 12.0(3.00) - 24.0 = +12.0\text{ rad/s}^2. Since ω=0 rad/s\omega = 0\text{ rad/s}, the blade is momentarily at rest (instantaneously stopping before reversing/speeding up in the positive direction).

Loading workspace…