Resources

A small test vehicle travels counterclockwise along a horizontal circular track of radius R=45.0 mR = 45.0\text{ m} centered at the origin (0,0)(0, 0) in the xyxy-plane. At the instant the vehicle reaches the point (0 m,45.0 m)(0\text{ m}, 45.0\text{ m}), its speedometer reads a constant speed of v=18.0 m/sv = 18.0\text{ m/s}. (a) State the geometric relationship between the velocity vector and the circular path at any given instant. (b) Determine the velocity vector v⃗\vec{v} of the vehicle at this instant in unit-vector notation.

Answer and steps

Final answer

(a) The velocity vector is strictly tangent to the circular path and perpendicular to the radial position vector pointing from the center to the vehicle (90∘90^\circ or π2 rad\frac{\pi}{2}\text{ rad}); (b) v⃗=−18.0i^ m/s\vec{v} = -18.0\hat{i}\text{ m/s} (or v⃗=−18.0i^+0j^ m/s\vec{v} = -18.0\hat{i} + 0\hat{j}\text{ m/s}, directed due west).

Steps

Part (a): Geometric Relationship of the Velocity Vector

In any curved or circular path, the instantaneous velocity vector v⃗\vec{v} is defined as the time derivative of the position vector: v⃗=dr⃗dt\vec{v} = \frac{d\vec{r}}{dt}

Because the vehicle is constrained to move along the perimeter of the circle, the direction of motion at any infinitesimally small interval is collinear with the tangent line to the circle at that point.

  1. Tangency to the Path: The velocity vector v⃗\vec{v} is always directed tangent to the circular path in the direction of motion.
  2. Perpendicularity to the Radius: A fundamental geometric property of a circle is that the tangent line at any point is perpendicular to the radius connecting the center to that point. Therefore, the velocity vector is perpendicular (at an angle of 90∘90^\circ or π2 rad\frac{\pi}{2}\text{ rad}) to the radial position vector r⃗\vec{r}.

Common Pitfall: Do not confuse the direction of velocity with that of acceleration. While the centripetal acceleration points radially inward toward the center, the instantaneous velocity is purely tangential and has no radial component.


Part (b): Determining the Velocity Vector in Unit-Vector Notation

  1. Identify the Position and Orientation:

    • The circular track is centered at (0,0)(0, 0) with radius R=45.0 mR = 45.0\text{ m}.
    • The vehicle is located at coordinates (x,y)=(0 m,45.0 m)(x, y) = (0\text{ m}, 45.0\text{ m}), which lies directly on the positive yy-axis (the "north" position of the circle).
    • The position vector of the vehicle is: r⃗=0i^+45.0j^ m\vec{r} = 0\hat{i} + 45.0\hat{j}\text{ m}
  2. Determine the Direction of Motion:

    • The vehicle moves counterclockwise.
    • At the topmost point of a counterclockwise circular trajectory, motion along the tangent line proceeds horizontally to the left, which corresponds to the negative xx-direction (due west).
    • In unit-vector notation, this direction is represented by −i^-\hat{i}.
  3. Construct the Velocity Vector:

    • The magnitude of the velocity is the given constant speed, v=18.0 m/sv = 18.0\text{ m/s}.
    • Multiplying the magnitude by the directional unit vector gives: v⃗=v(−i^)=−18.0i^ m/s\vec{v} = v(-\hat{i}) = -18.0\hat{i}\text{ m/s}
    • Writing both components explicitly: v⃗=−18.0i^+0j^ m/s\vec{v} = -18.0\hat{i} + 0\hat{j}\text{ m/s}

Typical errors

OverviewACEpath Teacher's Diagnosis

01 The student confuses counterclockwise motion with the positive x-direction, assigning the velocity along +î instead of -î.

Sample Student Work

Reviewed by ACEpath Teacher
Step-by-Step Review
Walk Through It with Your Teacher
Partially correct
  1. Step 1

    The velocity vector is tangent to the circle in the direction of motion.

  2. Step 2

    At (0,45.0 m)(0, 45.0\text{ m}), moving along the track points in the positive xx-direction.

    Correct

    At (0,45.0 m)(0, 45.0\text{ m}), moving counterclockwise along the track points in the negative xx-direction (−i^-\hat{i}).

    The vehicle travels counterclockwise. At the top of the circle (0,45.0 m)(0, 45.0\text{ m}), moving counterclockwise proceeds to the left (due west), which corresponds to the negative xx-direction (−i^-\hat{i}), not the positive xx-direction.

  3. Step 3

    v⃗=18.0i^ m/s\vec{v} = 18.0\hat{i}\text{ m/s}

    Correct

    v⃗=−18.0i^ m/s\vec{v} = -18.0\hat{i}\text{ m/s}

    Because of the reversed horizontal direction in the previous step, your final vector has +18.0i^+18.0\hat{i} instead of −18.0i^-18.0\hat{i}.

WHAT YOU DID WELL
Compliments from Your Teacher

You correctly recognized that instantaneous velocity must always be directed tangent to the circular path.

You correctly crossed out the initial radial/vertical guess of 18.0j^ m/s18.0\hat{j}\text{ m/s} to keep the vector strictly along the horizontal tangent.

THE ERROR
Where Your ACEpath Teacher Spotted the Mistake
Reversed Tangential Direction in Circular Motion

You associated counterclockwise motion with +x+x instead of tracing the tangent vector pointing left at the top point (0,R)(0, R).

WHY IT HAPPENED
ACEpath Teacher's Diagnosis

Misinterpreting the physical orientation of counterclockwise rotation at the top of a Cartesian coordinate system, confusing 'counterclockwise' with moving in the positive coordinate direction.

REASONING PATH
Your ACEpath teacher’s suggested approach
Sketch the Tangent Arrow
  • At any point on a circle, draw a small arrow along the curve indicating the rotational sense (counterclockwise goes right at the bottom, up on the right, left at the top, down on the left).

  • At (0,R)(0, R), trace counterclockwise motion from the +x+x-axis through the top point: it moves from right to left, which is −i^-\hat{i}.

CORRECTED PATH
ACEpath Teacher's Demonstration
  1. Locate the vehicle at (0 m,45.0 m)(0\text{ m}, 45.0\text{ m}), which is the highest point on the circle of radius R=45.0 mR = 45.0\text{ m}.

  2. Trace counterclockwise circulation: passing through the positive yy-axis, the tangent points horizontally to the left, which is the negative xx-direction (−i^-\hat{i}).

  3. Multiply the speed v=18.0 m/sv = 18.0\text{ m/s} by the directional unit vector −i^-\hat{i}.

Final answer

v⃗=−18.0i^ m/s\vec{v} = -18.0\hat{i}\text{ m/s}

NEXT STEPS
Final Takeaways from Your Teacher
  • Sketch circular paths with directional arrows at all four cardinal points ((R,0)(R, 0), (0,R)(0, R), (−R,0)(-R, 0), (0,−R)(0, -R)) for both clockwise and counterclockwise travel.

  • Practice converting each cardinal tangent arrow directly into standard unit-vector notation (±i^±\hat{i}, ±j^±\hat{j}).

OverviewACEpath Teacher's Diagnosis

02 The student confuses the velocity vector with the radial position vector or centripetal direction, orienting the velocity along the y-axis instead of tangent to the path.

Sample Student Work

Reviewed by ACEpath Teacher
Step-by-Step Review
Walk Through It with Your Teacher
Incorrect
  1. Step 1

    The velocity vector is perpendicular to the circular path.

    Correct

    The velocity vector is tangent to the circular path (and perpendicular to the radius).

    Velocity points along the direction of instantaneous travel, which is tangent to the curve at every point. It is perpendicular to the radial line connecting the center to the vehicle, not perpendicular to the path itself.

  2. Step 2

    The vehicle is at (0,45.0 m)(0, 45.0\text{ m}) on the y-axis, so velocity is along the y-axis.

    Correct

    At (0 m,45.0 m)(0\text{ m}, 45.0\text{ m}), moving counterclockwise along the circle directs the vehicle horizontally to the left (along the negative xx-axis).

    Being located along the yy-axis describes the radial position vector r⃗\vec{r}, not the velocity vector. Because motion is counterclockwise around the circle, moving along the tangent at the topmost point points due west (−i^-\hat{i}).

  3. Step 3

    v⃗=18.0j^ m/s\vec{v} = 18.0\hat{j}\text{ m/s}

    Correct

    v⃗=−18.0i^ m/s\vec{v} = -18.0\hat{i}\text{ m/s}

    Because the tangent direction was incorrectly assumed to be along the yy-axis, the resulting unit vector became +j^+\hat{j} instead of −i^-\hat{i}.

WHAT YOU DID WELL
Compliments from Your Teacher

You correctly identified the vehicle's position along the positive yy-axis at (0 m,45.0 m)(0\text{ m}, 45.0\text{ m}).

You correctly preserved the given speed magnitude of 18.0 m/s18.0\text{ m/s} in your vector.

THE ERROR
Where Your ACEpath Teacher Spotted the Mistake
Velocity direction confused with position/radial vector in circular motion

You swapped the concepts of tangential path direction and radial position, writing that velocity aligns with the yy-axis where the object sits.

WHY IT HAPPENED
ACEpath Teacher's Diagnosis

Confusing the direction of instantaneous motion with the radial position vector: in uniform circular motion, position r⃗\vec{r} points radially outward from the center, centripetal acceleration a⃗c\vec{a}_c points radially inward, and velocity v⃗\vec{v} points strictly along the tangent line.

REASONING PATH
Your ACEpath teacher’s suggested approach
Tangent vs. Radial
  • The velocity vector v⃗\vec{v} is always tangent to the trajectory, meaning v⃗⋅r⃗=0\vec{v} \cdot \vec{r} = 0 for circular motion centered at the origin.

  • Sketch the circle, draw the radial line from the origin to the object, and then draw an arrow at a right angle to that radial line pointing in the direction of travel.

Counterclockwise Tangent Directions
  • For counterclockwise travel: at (0,R)(0, R) tangent is −i^-\hat{i}; at (−R,0)(-R, 0) tangent is −j^-\hat{j}; at (0,−R)(0, -R) tangent is +i^+\hat{i}; at (R,0)(R, 0) tangent is +j^+\hat{j}.

  • Imagine walking along the circle counterclockwise to see which Cartesian direction your nose points at each cardinal point.

CORRECTED PATH
ACEpath Teacher's Demonstration
  1. The vehicle is at (0 m,45.0 m)(0\text{ m}, 45.0\text{ m}), which is the highest point of the circular path on the positive yy-axis.

  2. Moving counterclockwise along the top edge of a circle requires moving horizontally to the left, which corresponds to the unit vector −i^-\hat{i}.

  3. Multiply the speed v=18.0 m/sv = 18.0\text{ m/s} by the directional unit vector −i^-\hat{i}.

Final answer

v⃗=−18.0i^ m/s\vec{v} = -18.0\hat{i}\text{ m/s} (or v⃗=−18.0i^+0j^ m/s\vec{v} = -18.0\hat{i} + 0\hat{j}\text{ m/s})

NEXT STEPS
Final Takeaways from Your Teacher
  • Review the distinction between tangential vectors (velocity) and radial vectors (position, centripetal acceleration) in circular kinematics.

  • Practice drawing velocity vectors at the four cardinal positions of a circular path for both clockwise and counterclockwise directions.

OverviewACEpath Teacher's Diagnosis

03 The student confuses clockwise with counterclockwise rotation, determining that motion at the top of the track is directed toward the right (+x) rather than left (-x).

Sample Student Work

Reviewed by ACEpath Teacher
Step-by-Step Review
Walk Through It with Your Teacher
Partially correct
  1. Step 1

    The velocity vector is tangent to the circle.

  2. Step 2

    Counterclockwise motion at the top of the circle goes right.

    Correct

    At the top of the circle (0 m,45.0 m)(0\text{ m}, 45.0\text{ m}), counterclockwise motion is directed toward the left (−i^-\hat{i}).

    Moving counterclockwise traces the circle opposite to the hands of a clock. At 12 o'clock, the motion moves toward 9 o'clock (left), which points in the negative xx-direction (−i^-\hat{i}), not to the right.

  3. Step 3

    v⃗=(18.0 m/s)i^\vec{v} = (18.0\text{ m/s})\hat{i}

    Correct

    v⃗=−18.0i^ m/s\vec{v} = -18.0\hat{i}\text{ m/s}

    Because your direction in step 2 was reversed, your final velocity vector received a positive i^\hat{i} unit vector instead of −i^-\hat{i}.

WHAT YOU DID WELL
Compliments from Your Teacher

You correctly recognized that the instantaneous velocity vector is tangent to the circle.

You properly combined the given speed magnitude with a horizontal Cartesian unit vector.

THE ERROR
Where Your ACEpath Teacher Spotted the Mistake
Direction reversal in circular motion

no

WHY IT HAPPENED
ACEpath Teacher's Diagnosis

You confused clockwise and counterclockwise rotational directions at the top of the circular trajectory, treating 12 o'clock motion as moving toward the right (+x) rather than toward the left (-x).

REASONING PATH
Your ACEpath teacher’s suggested approach
Determine tangent direction from rotation sense
  • Counterclockwise (CCW) rotation moves from the +x+x-axis to the +y+y-axis, then to the −x-x-axis, and finally to the −y-y-axis.

  • Visualize a standard analog clock face: clockwise moves top-to-right (12 to 3), whereas counterclockwise moves top-to-left (12 to 9).

CORRECTED PATH
ACEpath Teacher's Demonstration
  1. At the coordinate (0 m,45.0 m)(0\text{ m}, 45.0\text{ m}), the vehicle is at the topmost point of the circular path.

  2. Following the counterclockwise trajectory, the path curves from (45.0 m,0 m)(45.0\text{ m}, 0\text{ m}) upward to (0 m,45.0 m)(0\text{ m}, 45.0\text{ m}) and then leftward toward (−45.0 m,0 m)(-45.0\text{ m}, 0\text{ m}).

  3. Therefore, the tangent direction at (0 m,45.0 m)(0\text{ m}, 45.0\text{ m}) is directed along the negative xx-axis, represented by −i^-\hat{i}.

  4. Multiply the speed v=18.0 m/sv = 18.0\text{ m/s} by the unit vector −i^-\hat{i}.

Final answer

v⃗=−18.0i^ m/s\vec{v} = -18.0\hat{i}\text{ m/s}

NEXT STEPS
Final Takeaways from Your Teacher
  • Sketch a quick circular dial with arrowheads showing the rotation direction whenever you determine velocity or acceleration vectors.

  • Double-check each cardinal point (top, bottom, left, right) against clock hands to ensure the correct sign on Cartesian unit vectors.

Lock it in

Similar question

01

A particle moves counterclockwise in a horizontal circle of radius 5.0 m5.0\text{ m} centered at the origin. If its speed is 12 m/s12\text{ m/s}, find its velocity vector v⃗\vec{v} when it passes the point (0 m,−5.0 m)(0\text{ m}, -5.0\text{ m}).

Answer

v⃗=12i^ m/s\vec{v} = 12\hat{i}\text{ m/s}. At the bottom point (0,−5.0 m)(0, -5.0\text{ m}), counterclockwise motion directs the tangent arrow toward the right, along the positive xx-direction (+i^+\hat{i}).

02

A runner travels clockwise around a circular track of radius 30 m30\text{ m} centered at (0,0)(0, 0) at a constant speed of 6.0 m/s6.0\text{ m/s}. Determine the velocity vector v⃗\vec{v} at the instant the runner is at (0 m,30 m)(0\text{ m}, 30\text{ m}).

Answer

v⃗=6.0i^ m/s\vec{v} = 6.0\hat{i}\text{ m/s}. At the top of the circle, clockwise motion heads toward the right (east), which is along the positive xx-axis (+i^+\hat{i}).

03

A car moves counterclockwise at a constant speed of 20 m/s20\text{ m/s} along a circle centered at the origin. At an angle of θ=45∘\theta = 45^\circ relative to the positive xx-axis, express the velocity vector v⃗\vec{v} in unit-vector notation.

Answer

v⃗=−102i^+102j^ m/s\vec{v} = -10\sqrt{2}\hat{i} + 10\sqrt{2}\hat{j}\text{ m/s} (or approximately −14.1i^+14.1j^ m/s-14.1\hat{i} + 14.1\hat{j}\text{ m/s}). At 45∘45^\circ in counterclockwise motion, the unit tangent vector is u^t=−sin⁡(45∘)i^+cos⁡(45∘)j^=−22i^+22j^\hat{u}_t = -\sin(45^\circ)\hat{i} + \cos(45^\circ)\hat{j} = -\frac{\sqrt{2}}{2}\hat{i} + \frac{\sqrt{2}}{2}\hat{j}.

Loading workspace…