Resources

A 4.50 kg4.50\text{ kg} crate rests on a horizontal wooden floor where the coefficient of static friction is μs=0.350\mu_s = 0.350 and the local acceleration due to gravity is g=9.80 m/s2g = 9.80\text{ m/s}^2. An applied horizontal pulling force FpullF_{\text{pull}} is gradually increased until the crate is right on the verge of impending slip. For this exact threshold boundary: (a) list all explicit and implicit known variables and their values; (b) identify the unknown critical threshold quantity; and (c) determine the maximum magnitude of FpullF_{\text{pull}} before the crate begins to move.

Answer and steps

Final answer

(a) Knowns: mass m=4.50 kgm = 4.50\text{ kg}, acceleration due to gravity g=9.80 m/s2g = 9.80\text{ m/s}^2, coefficient of static friction μs=0.350\mu_s = 0.350, system acceleration at impending slip a=0 m/s2a = 0\text{ m/s}^2; (b) Unknown: maximum static friction force fs,max⁡f_{s,\max} (and the equal threshold pulling force Fpull,critF_{\text{pull},\text{crit}}); (c) Fpull,crit=15.4 NF_{\text{pull},\text{crit}} = 15.4\text{ N}.

Steps

Part (a): Extracting Known Quantities

Carefully reading the physical description allows us to separate explicitly stated values from conditions implied by the state of motion:

  1. Explicit knowns directly given in the text:

    • Mass of the crate: m=4.50 kgm = 4.50\text{ kg}
    • Acceleration due to gravity: g=9.80 m/s2g = 9.80\text{ m/s}^2
    • Coefficient of static friction: μs=0.350\mu_s = 0.350
  2. Implicit knowns from the physical context:

    • The phrase "on the verge of impending slip" means the crate is still stationary and in static equilibrium right before motion begins. Therefore, its acceleration is: a=0 m/s2a = 0\text{ m/s}^2
    • The floor is horizontal and there is no vertical motion, meaning vertical acceleration is also ay=0 m/s2a_y = 0\text{ m/s}^2.

Part (b): Identifying the Unknown Quantity

  • Target Unknown: The critical applied horizontal pulling force at the threshold of motion, Fpull,critF_{\text{pull},\text{crit}}, which balances the maximum static friction force: fs,max⁡=Fpull,critf_{s,\max} = F_{\text{pull},\text{crit}}

Part (c): Determining the Maximum Pulling Force

To find Fpull,critF_{\text{pull},\text{crit}}, apply Newton's second law along the vertical and horizontal axes:

  1. Vertical Equilibrium: Because the crate does not accelerate vertically (ΣFy=0\Sigma F_y = 0): FN−mg=0  ⟹  FN=mgF_N - mg = 0 \implies F_N = mg Substitute the known values: FN=(4.50 kg)(9.80 m/s2)=44.1 NF_N = (4.50\text{ kg})(9.80\text{ m/s}^2) = 44.1\text{ N}
  2. Maximum Static Friction Force: The maximum static friction before sliding occurs is given by: fs,max⁡=μsFNf_{s,\max} = \mu_s F_N fs,max⁡=(0.350)(44.1 N)=15.435 Nf_{s,\max} = (0.350)(44.1\text{ N}) = 15.435\text{ N}
  3. Horizontal Equilibrium at Impending Slip: Since the crate is at the threshold of motion, horizontal forces remain balanced (ΣFx=0\Sigma F_x = 0): Fpull,crit−fs,max⁡=0  ⟹  Fpull,crit=fs,max⁡F_{\text{pull},\text{crit}} - f_{s,\max} = 0 \implies F_{\text{pull},\text{crit}} = f_{s,\max} Fpull,crit≈15.4 NF_{\text{pull},\text{crit}} \approx 15.4\text{ N}

Common Pitfall: Static friction is a variable reaction force (0≤fs≤μsFN0 \le f_s \le \mu_s F_N). It only equals μsFN\mu_s F_N at the exact instant of impending motion. For any applied force smaller than 15.4 N15.4\text{ N}, the static friction matches the applied pull exactly (fs=Fpullf_s = F_{\text{pull}}).

Typical errors

OverviewACEpath Teacher's Diagnosis

01 The student confuses the crate's mass with its weight, omitting the acceleration due to gravity g when calculating the normal force.

Sample Student Work

Reviewed by ACEpath Teacher
Step-by-Step Review
Walk Through It with Your Teacher
Partially correct
  1. Step 1

    m=4.50 kgm = 4.50\text{ kg}, μs=0.350\mu_s = 0.350, g=9.80 m/s2g = 9.80\text{ m/s}^2, a=0 m/s2a = 0\text{ m/s}^2

  2. Step 2

    Critical quantity is Fpull\text{Critical quantity is } F_{\text{pull}}

  3. Step 3

    N=m=4.50 NN = m = 4.50\text{ N}

    Correct

    N=mg=(4.50 kg)(9.80 m/s2)=44.1 NN = mg = (4.50\text{ kg})(9.80\text{ m/s}^2) = 44.1\text{ N}

    Mass and weight are fundamentally different physical quantities. On a level surface with no other vertical forces, the normal force balances the gravitational weight force W=mgW = mg, not the mass mm.

  4. Step 4

    Fpull=μsN  ⟹  Fpull=(0.350)(4.50 N)=1.58 NF_{\text{pull}} = \mu_s N \implies F_{\text{pull}} = (0.350)(4.50\text{ N}) = 1.58\text{ N}

    Correct

    Fpull,crit=μsN=(0.350)(44.1 N)=15.4 NF_{\text{pull},\text{crit}} = \mu_s N = (0.350)(44.1\text{ N}) = 15.4\text{ N}

    You applied the correct maximum static friction relationship Fpull=μsNF_{\text{pull}} = \mu_s N, but your result was altered because it used the incorrect normal force from the previous step.

WHAT YOU DID WELL
Compliments from Your Teacher

You correctly identified all explicit and implicit physical knowns, including recognizing that impending slip implies zero acceleration.

You correctly identified the critical threshold pulling force as the primary unknown.

You selected the correct formula relating the maximum static friction force to the normal force.

THE ERROR
Where Your ACEpath Teacher Spotted the Mistake
Mass vs. Weight Confusion

no

WHY IT HAPPENED
ACEpath Teacher's Diagnosis

You treated the object's mass in kilograms as if it were directly equal to its weight in newtons, omitting the factor of the gravitational acceleration gg (9.80 m/s29.80\text{ m/s}^2) required to convert mass to weight force.

REASONING PATH
Your ACEpath teacher’s suggested approach
Distinguishing Mass from Gravitational Force
  • Mass mm measures inertia (in kg\text{kg}), whereas weight WW is the gravitational force exerted on that mass, given by W=mgW = mg (in N\text{N}).

  • Always compute W=mgW = mg to determine the downward gravitational force before solving for the balancing normal force FNF_N.

Vertical Equilibrium on a Level Surface
  • For an object resting without vertical acceleration on a horizontal plane with no other vertical forces, ΣFy=FN−mg=0\Sigma F_y = F_N - mg = 0, meaning FN=mgF_N = mg.

  • Set FN=(4.50 kg)(9.80 m/s2)=44.1 NF_N = (4.50\text{ kg})(9.80\text{ m/s}^2) = 44.1\text{ N} before computing the friction threshold.

CORRECTED PATH
ACEpath Teacher's Demonstration
  1. Set up Newton's second law along the vertical axis: ΣFy=FN−mg=0\Sigma F_y = F_N - mg = 0.

  2. Solve for the normal force: FN=mg=(4.50 kg)(9.80 m/s2)=44.1 NF_N = mg = (4.50\text{ kg})(9.80\text{ m/s}^2) = 44.1\text{ N}.

  3. Substitute FNF_N into the impending slip condition: Fpull,crit=fs,max⁡=μsFNF_{\text{pull},\text{crit}} = f_{s,\max} = \mu_s F_N.

  4. Calculate the threshold pull: Fpull,crit=(0.350)(44.1 N)=15.435 N≈15.4 NF_{\text{pull},\text{crit}} = (0.350)(44.1\text{ N}) = 15.435\text{ N} \approx 15.4\text{ N}.

Final answer

Fpull,crit=15.4 NF_{\text{pull},\text{crit}} = 15.4\text{ N}

NEXT STEPS
Final Takeaways from Your Teacher
  • Review the distinction between mass (scalar measure of inertia in kg\text{kg}) and weight (force vector in N\text{N}).

  • Practice setting up explicit free-body diagram equations along both the vertical and horizontal axes before substituting numerical values.

OverviewACEpath Teacher's Diagnosis

02 The student divides the normal force by the friction coefficient rather than multiplying it to determine the maximum static friction force.

Sample Student Work

Reviewed by ACEpath Teacher
Step-by-Step Review
Walk Through It with Your Teacher
Partially correct
  1. Step 1

    m=4.50 kgm = 4.50\text{ kg}, μs=0.350\mu_s = 0.350, g=9.80 m/s2g = 9.80\text{ m/s}^2

  2. Step 2

    Maximum applied force Fpull\text{Maximum applied force } F_{\text{pull}}

  3. Step 3

    N=mg=(4.50 kg)(9.80 m/s2)=44.1 NN = mg = (4.50\text{ kg})(9.80\text{ m/s}^2) = 44.1\text{ N}

  4. Step 4

    Fpull=Nμs  ⟹  Fpull=44.1 N0.350=126 NF_{\text{pull}} = \frac{N}{\mu_s} \implies F_{\text{pull}} = \frac{44.1\text{ N}}{0.350} = 126\text{ N}

    Correct

    Fpull=fs,max⁡=μsN=(0.350)(44.1 N)≈15.4 NF_{\text{pull}} = f_{s,\max} = \mu_s N = (0.350)(44.1\text{ N}) \approx 15.4\text{ N}

    The maximum static friction force is directly proportional to the normal force and given by fs,max⁡=μsNf_{s,\max} = \mu_s N, not N/μsN / \mu_s. Dividing by μs\mu_s resulted in an unphysically large friction force greater than the weight of the crate.

WHAT YOU DID WELL
Compliments from Your Teacher

You extracted the primary physical parameters given in the problem with their correct units.

You stated the correct target quantity for the threshold of motion.

You calculated the normal force acting on the level surface accurately using N=mgN = mg.

THE ERROR
Where Your ACEpath Teacher Spotted the Mistake
Formula inversion / algebraic substitution error in friction law

You set up the relation as Fpull=NμsF_{\text{pull}} = \frac{N}{\mu_s} rather than Fpull=μsNF_{\text{pull}} = \mu_s N.

WHY IT HAPPENED
ACEpath Teacher's Diagnosis

Confusing the multiplicative relationship in Amontons' law of friction (f=μNf = \mu N) with a division operation, forgetting that the friction coefficient μ\mu is a fractional scaling factor relating friction force to normal force.

REASONING PATH
Your ACEpath teacher’s suggested approach
Friction Magnitude Sanity Check
  • For typical surfaces where μ<1\mu < 1, the maximum friction force must be smaller than the normal force pressing the surfaces together (fs,max⁡<FNf_{s,\max} < F_N).

  • Always multiply the normal force by μs\mu_s (fs,max⁡=μsFNf_{s,\max} = \mu_s F_N) and verify that your answer is a fraction of the normal force when μs<1\mu_s < 1.

CORRECTED PATH
ACEpath Teacher's Demonstration
  1. State horizontal equilibrium at impending slip: Fpull=fs,max⁡F_{\text{pull}} = f_{s,\max}.

  2. Substitute the definition of maximum static friction: fs,max⁡=μsNf_{s,\max} = \mu_s N.

  3. Evaluate: Fpull=(0.350)(44.1 N)=15.435 NF_{\text{pull}} = (0.350)(44.1\text{ N}) = 15.435\text{ N}.

Final answer

Fpull≈15.4 NF_{\text{pull}} \approx 15.4\text{ N}

NEXT STEPS
Final Takeaways from Your Teacher
  • Review the definition of the static friction model: fs,max⁡=μsFNf_{s,\max} = \mu_s F_N.

  • Perform a quick mental check: because μs=0.350<1\mu_s = 0.350 < 1, the friction force must be roughly one-third of the normal force, not almost triple it.

Lock it in

Similar question

01

A 6.00 kg6.00\text{ kg} metal block rests on a horizontal steel bench where μs=0.400\mu_s = 0.400 and g=9.80 m/s2g = 9.80\text{ m/s}^2. Calculate the normal force acting on the block and the minimum horizontal pulling force required to cause impending motion.

Answer
  1. Vertical equilibrium: FN=mg=(6.00 kg)(9.80 m/s2)=58.8 NF_N = mg = (6.00\text{ kg})(9.80\text{ m/s}^2) = 58.8\text{ N}.
  2. Static friction threshold: Fpull=fs,max⁡=μsFN=(0.400)(58.8 N)=23.5 NF_{\text{pull}} = f_{s,\max} = \mu_s F_N = (0.400)(58.8\text{ N}) = 23.5\text{ N}.
02

A 15.0 kg15.0\text{ kg} box is on a level floor (μs=0.280\mu_s = 0.280, g=9.80 m/s2g = 9.80\text{ m/s}^2). An external vertical downward push of 20.0 N20.0\text{ N} is applied on top of the box. Determine the maximum static friction force preventing horizontal motion.

Answer
  1. Vertical equilibrium: ΣFy=FN−mg−Fpush=0  ⟹  FN=(15.0 kg)(9.80 m/s2)+20.0 N=147.0 N+20.0 N=167.0 N\Sigma F_y = F_N - mg - F_{\text{push}} = 0 \implies F_N = (15.0\text{ kg})(9.80\text{ m/s}^2) + 20.0\text{ N} = 147.0\text{ N} + 20.0\text{ N} = 167.0\text{ N}.
  2. Maximum static friction: fs,max⁡=μsFN=(0.280)(167.0 N)=46.8 Nf_{s,\max} = \mu_s F_N = (0.280)(167.0\text{ N}) = 46.8\text{ N}.
03

A 8.00 kg8.00\text{ kg} sled rests on level ice where μs=0.150\mu_s = 0.150 and g=9.80 m/s2g = 9.80\text{ m/s}^2. A child pulls the sled with a rope angled at 30.0∘30.0^\circ above the horizontal. Find the tension TT in the rope required to initiate slip.

Answer
  1. Vertical balance: FN+Tsin⁡(30.0∘)−mg=0  ⟹  FN=mg−Tsin⁡(30.0∘)F_N + T\sin(30.0^\circ) - mg = 0 \implies F_N = mg - T\sin(30.0^\circ).
  2. Horizontal balance at impending slip: Tcos⁡(30.0∘)=μsFN=μs[mg−Tsin⁡(30.0∘)]T\cos(30.0^\circ) = \mu_s F_N = \mu_s [mg - T\sin(30.0^\circ)].
  3. Solve for TT: T=μsmgcos⁡(30.0∘)+μssin⁡(30.0∘)=0.150(8.00 kg)(9.80 m/s2)0.8660+0.150(0.500)=11.76 N0.9410≈12.5 NT = \frac{\mu_s mg}{\cos(30.0^\circ) + \mu_s \sin(30.0^\circ)} = \frac{0.150(8.00\text{ kg})(9.80\text{ m/s}^2)}{0.8660 + 0.150(0.500)} = \frac{11.76\text{ N}}{0.9410} \approx 12.5\text{ N}.
Loading workspace…