Resources
A crate of mass is pulled across a rough horizontal floor by a constant tension force of magnitude directed at an angle above the horizontal. Over a displacement , a constant kinetic friction force opposes the motion. (a) Classify each of the following quantities as either a scalar or a vector: force , displacement , work done by tension , and kinetic energy change . (b) Calculate the scalar work performed by the tension force in joules. (c) Calculate the net work done on the crate by all forces and the final speed of the crate assuming it starts from rest.
Answer and steps
Final answer
(a) and are vectors; and are scalars; (b) ; (c) , and .
Steps
Net Work ()
Part (a): Classifying Scalars and Vectors
A vector is a physical quantity that possesses both a magnitude (size with units) and a spatial direction. A scalar is a physical quantity specified solely by a magnitude (which may include an algebraic sign indicating increase/decrease or standard convention), having no direction in space.
- Tension force (): Requires both a magnitude () and a specific spatial orientation ( above the horizontal). Therefore, it is a vector.
- Displacement (): Measures the change in position with both magnitude () and a directional unit vector (). Therefore, it is a vector.
- Work (): The scalar (dot) product of two vectors yields a scalar quantity. Work represents an amount of energy transferred, requiring only magnitude and an algebraic sign, not a direction in space. Therefore, it is a scalar.
- Kinetic energy change (): Energy is a physical property describing a state or capability to do work; it has no spatial direction. Therefore, it is a scalar.
Part (b): Calculating the Work Done by Tension
The work done by a constant force acting over a linear displacement is given by the definition of the dot product: Substitute the given values:
- (where )
Part (c): Calculating Net Work and Final Speed
Four forces act on the crate during the displacement:
- Gravity () and Normal force (): Both act strictly in the vertical direction (), perpendicular to the horizontal displacement (). Because , the work done by both forces is zero:
- Kinetic friction (): Acts parallel but opposite to the displacement ():
The total net work is the scalar sum of the work done by each force:
Final Speed ()
According to the Work-Energy Theorem, the net work done on an object equals its change in kinetic energy:
Since the crate starts from rest, :
Typical errors
01 The student forgets to account for the angle of the applied force, using W = F * d instead of F * d * cos(θ), which overestimates the work done by tension and the resulting final speed.
Sample Student Work
Reviewed by ACEpath TeacherStep-by-Step Review
Walk Through It with Your Teacher- Step 1
F_T r W_T K
- Step 2
W_T = F_T * d W_T = (80.0)(6.00) W_T = 480
CorrectW_T = T = F_T d \cos = (80.0)(6.00)\cos(36.9^) = 384
You calculated work as directly without multiplying by . Because tension acts at an angle above the horizontal, only the parallel horizontal component performs work along the displacement.
- Step 3
W_f = (-35.0)(6.00) = -210 W_{} = W_T + W_f = 480 - 210 = 270_
CorrectW_{} = W_T + W_f = 384 + (-210) = 174_
You found the friction work correctly and properly summed the scalar works to find net work, but your result was affected by the earlier calculation of .
- Step 4
W_{} = m v_f^2 v_f = = 4.65_
Correctv_f = = = 3.73
You correctly formulated and solved the work-energy theorem , but the value of was affected by the inflated net work.
WHAT YOU DID WELL
Compliments from Your TeacherYou correctly distinguished vectors from scalars for all four physical quantities.
You accurately calculated the negative work done by kinetic friction.
You set up the work-energy theorem correctly to solve for final speed.
THE ERROR
Where Your ACEpath Teacher Spotted the MistakeYou used the magnitude product instead of the vector dot product .
WHY IT HAPPENED
ACEpath Teacher's DiagnosisYou treated work as force magnitude times displacement magnitude, overlooking that only the component of force parallel to the displacement contributes to mechanical work.
REASONING PATH
Your ACEpath teacher’s suggested approach- Include the directional angle
For a constant force and displacement , work is defined by the dot product , where is the angle between the two vectors.
Always draw a quick vector diagram to identify the angle between the force vector and the displacement vector before multiplying magnitudes.
CORRECTED PATH
ACEpath Teacher's DemonstrationCompute .
Sum the works for net work: .
Apply the work-energy theorem: .
(a) and are vectors; and are scalars; (b) ; (c) , and .
02 The student calculates the net work using only the tension force and omits the work done by friction, leading to an incorrect net work and an overestimated final speed.
Sample Student Work
Reviewed by ACEpath TeacherStep-by-Step Review
Walk Through It with Your Teacher- Step 1
- Step 2
- Step 3Correct
You set the net work equal only to the work of tension, omitting the negative work done by kinetic friction along the displacement.
- Step 4Correct
Your algebraic setup for the work-energy theorem was correct, but substituting the incorrect net work value caused the final speed to be too large.
WHAT YOU DID WELL
Compliments from Your TeacherYou clearly distinguished between vector and scalar quantities.
You correctly computed the work performed by the tension force using the angle cosine.
You correctly stated the relationship between net work and kinetic energy change.
THE ERROR
Where Your ACEpath Teacher Spotted the Mistakeno
WHY IT HAPPENED
ACEpath Teacher's DiagnosisYou treated the work done by the pulling force as the total net work on the system, forgetting that all parallel force components—specifically kinetic friction opposing the motion—must be included in the scalar sum of work.
REASONING PATH
Your ACEpath teacher’s suggested approach- Account for all acting forces
Net work is the algebraic sum of the work done by every force acting on the body: .
Always draw or review a free-body diagram to verify that every non-perpendicular force has its work evaluated before solving for final kinetic energy.
CORRECTED PATH
ACEpath Teacher's DemonstrationDetermine the work done by friction: .
Sum the scalar works: .
Apply the work-energy theorem: .
Solve for the final speed: .
,
03 The student misremembers the kinetic energy formula as m * v² instead of 1/2 * m * v², omitting the factor of 1/2 when solving for the final speed.
Sample Student Work
Reviewed by ACEpath TeacherStep-by-Step Review
Walk Through It with Your Teacher- Step 1
- Step 2
- Step 3
- Step 4Correct
You used instead of . The work-energy theorem states that , which requires multiplying by before dividing by mass.
WHAT YOU DID WELL
Compliments from Your TeacherYou correctly distinguished vector quantities from scalar energy quantities in part (a).
You correctly computed the work done by the tension force using the cosine component.
You correctly determined the net work by combining the positive tension work and negative friction work.
THE ERROR
Where Your ACEpath Teacher Spotted the MistakeYou set net work equal to rather than when solving for final speed.
WHY IT HAPPENED
ACEpath Teacher's DiagnosisYou recalled the kinetic energy formula without the prefactor, confusing the full quadratic term with the correct definition .
REASONING PATH
Your ACEpath teacher’s suggested approach- Work-Energy Theorem and Kinetic Energy Formula
Translational kinetic energy is defined as , so net work from rest gives .
Whenever solving for speed via work or energy conservation, write out the explicit definition first to verify the factor of is included.
CORRECTED PATH
ACEpath Teacher's DemonstrationApply the work-energy theorem: .
Substitute : .
Isolate : .
Take the square root: .
Lock it in
What is the general formula for the mechanical work done by a constant force over a displacement ?
, where is the angle between the force and displacement vectors.
Similar question
A student pushes a lawnmower with a force of directed along the handle at an angle of below the horizontal. How much work does the student do in pushing the lawnmower a distance of across a level lawn?
Answer
. Key steps: .
A box is pulled across a frictionless floor by a rope with tension angled at above the horizontal over a distance of . If the box starts from rest, find (a) the work done by tension and (b) the final speed of the box.
Answer
(a) ; (b) . Key steps: (a) . (b) By the work-energy theorem, .
A block is pulled along a rough horizontal floor by a force directed at above horizontal (). A constant friction force of opposes the motion. Starting from rest, calculate (a) the work done by the pulling force, (b) the net work, and (c) the final velocity.
Answer
(a) ; (b) ; (c) . Key steps: (a) . (b) , so . (c) .