Resources

In relativistic kinematics, length contraction is given by L=L01−(v/c)2L = L_0\sqrt{1 - (v/c)^2}. A critical engineering threshold is defined as the velocity at which an object's relativistic contracted length is diminished by exactly 1.00%1.00\% compared to its proper length L0L_0 (i.e., L=0.990L0L = 0.990 L_0). Calculate the precise threshold speed vthreshv_{\text{thresh}} required to reach this 1.00%1.00\% contraction boundary, expressed in meters per second (c=3.00×108 m/sc = 3.00\times 10^8\text{ m/s}).

Answer and steps

Final answer

vthresh=4.23×107 m/sv_{\text{thresh}} = 4.23\times 10^7\text{ m/s}

Steps

1. Identify the Governing Formula and Given Values

Special relativity dictates that an object moving at a relative speed vv contracts along its direction of motion according to the Lorentz contraction equation: L=L01−(vc)2L = L_0 \sqrt{1 - \left(\frac{v}{c}\right)^2}

where:

  • L0L_0 is the proper length (measured in the object's rest frame),
  • LL is the contracted length measured by a stationary observer,
  • c=3.00×108 m/sc = 3.00 \times 10^8\text{ m/s} is the speed of light in vacuum.

The problem specifies that the contracted length is diminished by 1.00%1.00\%, meaning: L=(1−0.0100)L0=0.990L0L = (1 - 0.0100) L_0 = 0.990 L_0


2. Set up and Rearrange the Equation

Substitute L=0.990L0L = 0.990 L_0 into the length contraction formula: 0.990L0=L01−(vthreshc)20.990 L_0 = L_0 \sqrt{1 - \left(\frac{v_{\text{thresh}}}{c}\right)^2}

Divide both sides by L0L_0: 0.990=1−(vthreshc)20.990 = \sqrt{1 - \left(\frac{v_{\text{thresh}}}{c}\right)^2}

Square both sides to eliminate the square root: 0.9902=1−(vthreshc)20.990^2 = 1 - \left(\frac{v_{\text{thresh}}}{c}\right)^2 0.9801=1−(vthreshc)20.9801 = 1 - \left(\frac{v_{\text{thresh}}}{c}\right)^2

Solve for (vthreshc)2\left(\frac{v_{\text{thresh}}}{c}\right)^2: (vthreshc)2=1−0.9801=0.0199\left(\frac{v_{\text{thresh}}}{c}\right)^2 = 1 - 0.9801 = 0.0199


3. Calculate the Threshold Speed vthreshv_{\text{thresh}}

Take the square root to determine the fraction of the speed of light: vthreshc=0.0199≈0.14107\frac{v_{\text{thresh}}}{c} = \sqrt{0.0199} \approx 0.14107

Now, multiply by the value of cc: vthresh=0.14107×3.00×108 m/sv_{\text{thresh}} = 0.14107 \times 3.00 \times 10^8\text{ m/s} vthresh≈4.23×107 m/sv_{\text{thresh}} \approx 4.23 \times 10^7\text{ m/s}

Common Pitfall: A common mistake is using the binomial approximation L≈L0(1−12v2c2)L \approx L_0 \left(1 - \frac{1}{2}\frac{v^2}{c^2}\right) carelessly without checking its precision, or incorrectly assuming that a 1%1\% change in length corresponds to a 1%1\% change in speed (v=0.01cv = 0.01c). Because the Lorentz factor depends on the square of (v/c)(v/c), a noticeable relativistic effect occurs only at speeds substantially larger than 1%1\% of cc.

Typical errors

OverviewACEpath Teacher's Diagnosis

01 The student forgets to take the square root of (v/c)² when solving for v/c, mistaking 1 - 0.990² directly for the velocity fraction.

Sample Student Work

Reviewed by ACEpath Teacher
Step-by-Step Review
Walk Through It with Your Teacher
Incorrect
  1. Step 1

    L=L01−(v/c)2  ⟹  0.990=1−(v/c)2L = L_0\sqrt{1 - (v/c)^2} \implies 0.990 = \sqrt{1 - (v/c)^2}

  2. Step 2

    0.9801=1−(v/c)2  ⟹  (v/c)2=0.01990.9801 = 1 - (v/c)^2 \implies (v/c)^2 = 0.0199

  3. Step 3

    v/c=0.0199v/c = 0.0199

    Correct

    vc=0.0199≈0.14107\frac{v}{c} = \sqrt{0.0199} \approx 0.14107

    You omitted the square root when moving from (v/c)2=0.0199(v/c)^2 = 0.0199 to v/cv/c. Taking the square root gives 0.0199≈0.14107\sqrt{0.0199} \approx 0.14107.

  4. Step 4

    v=0.0199×(3.00×108 m/s)=5.97×106 m/sv = 0.0199 \times (3.00\times 10^8\text{ m/s}) = 5.97\times 10^6\text{ m/s}

    Correct

    v=0.14107×(3.00×108 m/s)≈4.23×107 m/sv = 0.14107 \times (3.00\times 10^8\text{ m/s}) \approx 4.23\times 10^7\text{ m/s}

    Your calculation carried forward the unrooted value of v/cv/c, resulting in an incorrect final numerical speed.

WHAT YOU DID WELL
Compliments from Your Teacher

You correctly identified and applied the relativistic length contraction formula L=L01−(v/c)2L = L_0\sqrt{1 - (v/c)^2}.

You properly interpreted the 1.00%1.00\% contraction condition as L=0.990L0L = 0.990 L_0.

You accurately squared 0.9900.990 and subtracted it from 11 to find (v/c)2(v/c)^2.

THE ERROR
Where Your ACEpath Teacher Spotted the Mistake
Omitted square root when solving quadratic variable

You dropped the exponent on (v/c)2(v/c)^2 without taking the square root of the right-hand side.

WHY IT HAPPENED
ACEpath Teacher's Diagnosis

Treating (v/c)2(v/c)^2 and v/cv/c as interchangeable in the final algebraic step instead of taking the square root of both sides.

REASONING PATH
Your ACEpath teacher’s suggested approach
Clear the exponent completely
  • If x2=kx^2 = k, then x=kx = \sqrt{k} for x>0x > 0.

  • Always explicitly write out the square root radical …\sqrt{\dots} over the right-hand side when dropping an exponent of 22.

CORRECTED PATH
ACEpath Teacher's Demonstration
  1. Take the square root of both sides of (v/c)2=0.0199(v/c)^2 = 0.0199: vc=0.0199≈0.14107\frac{v}{c} = \sqrt{0.0199} \approx 0.14107.

  2. Multiply by the speed of light c=3.00×108 m/sc = 3.00\times 10^8\text{ m/s}: v=0.14107×3.00×108 m/s≈4.23×107 m/sv = 0.14107 \times 3.00\times 10^8\text{ m/s} \approx 4.23\times 10^7\text{ m/s}.

Final answer

vthresh=4.23×107 m/sv_{\text{thresh}} = 4.23\times 10^7\text{ m/s}

NEXT STEPS
Final Takeaways from Your Teacher
  • Double-check that whenever you square an equation early on, you perform the inverse operation (square root) before computing the final quantity.

  • Perform an order-of-magnitude check: (v/c)2≈0.02(v/c)^2 \approx 0.02 means v/c≈0.02≈0.14v/c \approx \sqrt{0.02} \approx 0.14, not 0.020.02.

OverviewACEpath Teacher's Diagnosis

02 The student forgets to square 0.990 after removing the square root, erroneously writing 1 - (v/c)² = 0.990.

Sample Student Work

Reviewed by ACEpath Teacher
Step-by-Step Review
Walk Through It with Your Teacher
Incorrect
  1. Step 1

    LL0=1−(vc)2  ⟹  0.990=1−(vc)2\frac{L}{L_0} = \sqrt{1 - \left(\frac{v}{c}\right)^2} \implies 0.990 = \sqrt{1 - \left(\frac{v}{c}\right)^2}

  2. Step 2

    1−(vc)2=0.9901 - \left(\frac{v}{c}\right)^2 = 0.990

    Correct

    0.9902=1−(vc)2  ⟹  0.9801=1−(vc)20.990^2 = 1 - \left(\frac{v}{c}\right)^2 \implies 0.9801 = 1 - \left(\frac{v}{c}\right)^2

    When squaring both sides of the equation to clear the square root, you must square 0.9900.990 as well, giving 0.9902=0.98010.990^2 = 0.9801 instead of leaving it as 0.9900.990.

  3. Step 3

    (vc)2=1−0.990=0.010  ⟹  vc=0.010=0.100\left(\frac{v}{c}\right)^2 = 1 - 0.990 = 0.010 \implies \frac{v}{c} = \sqrt{0.010} = 0.100

    Correct

    (vc)2=1−0.9801=0.0199  ⟹  vc=0.0199≈0.14107\left(\frac{v}{c}\right)^2 = 1 - 0.9801 = 0.0199 \implies \frac{v}{c} = \sqrt{0.0199} \approx 0.14107

    Your algebraic solving steps were followed logically, but the values were shifted by the un-squared term in the previous step.

  4. Step 4

    v=0.100×(3.00×108 m/s)=3.00×107 m/sv = 0.100 \times (3.00 \times 10^8\text{ m/s}) = 3.00 \times 10^7\text{ m/s}

    Correct

    vthresh=0.14107×(3.00×108 m/s)≈4.23×107 m/sv_{\text{thresh}} = 0.14107 \times (3.00 \times 10^8\text{ m/s}) \approx 4.23 \times 10^7\text{ m/s}

    Multiplying your calculated fraction by cc was mathematically correct in procedure, but carried forward the earlier arithmetic slip.

WHAT YOU DID WELL
Compliments from Your Teacher

You selected the correct relativistic length contraction equation.

You accurately interpreted a 1.00%1.00\% contraction as L/L0=0.990L/L_0 = 0.990.

You followed a clear, structured sequence of algebraic steps to isolate vv.

THE ERROR
Where Your ACEpath Teacher Spotted the Mistake
Unbalanced Squaring Error

You eliminated the square root on the right-hand side by squaring, but did not square the decimal 0.9900.990 on the left-hand side.

WHY IT HAPPENED
ACEpath Teacher's Diagnosis

Applying an operation to eliminate a radical on one side of an equation without symmetrically applying the power to the constant on the other side.

REASONING PATH
Your ACEpath teacher’s suggested approach
Symmetric Equation Balancing
  • If A=B\sqrt{A} = B, then squaring both sides gives A=B2A = B^2.

  • Whenever you remove a radical from one side of an equation, immediately write parentheses and an exponent of 22 around the entire expression on the other side.

CORRECTED PATH
ACEpath Teacher's Demonstration
  1. Square both sides properly: 0.9902=1−(vc)20.990^2 = 1 - \left(\frac{v}{c}\right)^2, which gives 0.9801=1−(vc)20.9801 = 1 - \left(\frac{v}{c}\right)^2.

  2. Rearrange to solve for (v/c)2(v/c)^2: (vc)2=1−0.9801=0.0199\left(\frac{v}{c}\right)^2 = 1 - 0.9801 = 0.0199.

  3. Take the square root: vc=0.0199≈0.14107\frac{v}{c} = \sqrt{0.0199} \approx 0.14107.

  4. Compute the threshold velocity: vthresh=0.14107×(3.00×108 m/s)≈4.23×107 m/sv_{\text{thresh}} = 0.14107 \times (3.00 \times 10^8\text{ m/s}) \approx 4.23 \times 10^7\text{ m/s}.

Final answer

vthresh=4.23×107 m/sv_{\text{thresh}} = 4.23 \times 10^7\text{ m/s}

NEXT STEPS
Final Takeaways from Your Teacher
  • Double-check algebraic balancing by writing explicit brackets (0.990)2=(1−(v/c)2)2(0.990)^2 = \left(\sqrt{1 - (v/c)^2}\right)^2 before simplifying.

  • Practice radical isolation equations where one side is a decimal close to 11.

OverviewACEpath Teacher's Diagnosis

03 The student misinterprets a 1.00% decrease as setting L = 0.010 L₀ instead of 0.990 L₀.

Sample Student Work

Reviewed by ACEpath Teacher
Step-by-Step Review
Walk Through It with Your Teacher
Incorrect
  1. Step 1

    L/L0=0.010L/L_0 = 0.010

    Correct

    L/L0=1−0.0100=0.990L/L_0 = 1 - 0.0100 = 0.990

    When a quantity decreases or contracts by 1.00%1.00\%, the remaining length is 100%−1.00%=99.0%100\% - 1.00\% = 99.0\% of its proper length, meaning L/L0=0.990L/L_0 = 0.990 rather than 0.0100.010.

  2. Step 2

    1−(v/c)2=0.010  ⟹  1−(v/c)2=0.0001  ⟹  (v/c)2=0.9999\sqrt{1 - (v/c)^2} = 0.010 \implies 1 - (v/c)^2 = 0.0001 \implies (v/c)^2 = 0.9999

    Correct

    1−(v/c)2=0.990  ⟹  1−(v/c)2=0.9801  ⟹  (v/c)2=0.0199\sqrt{1 - (v/c)^2} = 0.990 \implies 1 - (v/c)^2 = 0.9801 \implies (v/c)^2 = 0.0199

    Your algebraic method of squaring both sides and isolating (v/c)2(v/c)^2 was sound, but it propagated the initial fractional error.

  3. Step 3

    v/c=0.9999≈0.99995  ⟹  v=0.99995×(3.00×108 m/s)=2.99985×108 m/sv/c = \sqrt{0.9999} \approx 0.99995 \implies v = 0.99995 \times (3.00 \times 10^8\text{ m/s}) = 2.99985 \times 10^8\text{ m/s}

    Correct

    v/c=0.0199≈0.14107  ⟹  v=0.14107×(3.00×108 m/s)≈4.23×107 m/sv/c = \sqrt{0.0199} \approx 0.14107 \implies v = 0.14107 \times (3.00 \times 10^8\text{ m/s}) \approx 4.23 \times 10^7\text{ m/s}

    You calculated the square root and multiplied by cc properly, but the numerical result reflects the earlier ratio mistake.

WHAT YOU DID WELL
Compliments from Your Teacher

You correctly identified the relativistic length contraction relationship.

You accurately manipulated the radical equation algebraically to isolate (v/c)2(v/c)^2.

You correctly substituted the value of the speed of light cc to compute the final velocity.

THE ERROR
Where Your ACEpath Teacher Spotted the Mistake
Percentage reduction vs. percentage remaining confusion

no

WHY IT HAPPENED
ACEpath Teacher's Diagnosis

You conflated the percentage by which a value is diminished (1%1\%) with the remaining fractional ratio (L/L0L/L_0), setting L/L0=ΔL/L0L/L_0 = \Delta L / L_0 instead of 1−ΔL/L01 - \Delta L / L_0.

REASONING PATH
Your ACEpath teacher’s suggested approach
Diminished vs. Remaining
  • If a quantity XX decreases by p%p\%, the new quantity is X=(1−p/100)X0X = (1 - p/100)X_0, not (p/100)X0(p/100)X_0.

  • Check whether the problem specifies the amount lost or the amount remaining before setting the ratio.

CORRECTED PATH
ACEpath Teacher's Demonstration
  1. Determine the remaining length ratio: L/L0=1−0.0100=0.990L/L_0 = 1 - 0.0100 = 0.990.

  2. Equate to the Lorentz contraction factor: 1−(v/c)2=0.990\sqrt{1 - (v/c)^2} = 0.990.

  3. Square both sides: 1−(v/c)2=0.98011 - (v/c)^2 = 0.9801, so (v/c)2=0.0199(v/c)^2 = 0.0199.

  4. Solve for vv: v=0.0199×(3.00×108 m/s)≈4.23×107 m/sv = \sqrt{0.0199} \times (3.00 \times 10^8\text{ m/s}) \approx 4.23 \times 10^7\text{ m/s}.

Final answer

vthresh=4.23×107 m/sv_{\text{thresh}} = 4.23 \times 10^7\text{ m/s}

NEXT STEPS
Final Takeaways from Your Teacher
  • Review wordings like 'diminished by', 'reduced by', and 'contracts by' to ensure you compute 1−ΔL/L01 - \Delta L/L_0.

  • Practice solving length contraction problems where the percentage difference is small using both exact calculation and binomial approximations.

Lock it in

Similar question

01

A particle accelerator needs a beam of particles whose length contracts by 5.00%5.00\% along the direction of motion (L=0.950L0L = 0.950 L_0). Calculate the required particle speed vv in terms of cc.

Answer

v≈0.312cv \approx 0.312 c. Key steps: 0.950=1−(v/c)2  ⟹  (v/c)2=1−0.9502=1−0.9025=0.0975  ⟹  v/c=0.0975≈0.31220.950 = \sqrt{1 - (v/c)^2} \implies (v/c)^2 = 1 - 0.950^2 = 1 - 0.9025 = 0.0975 \implies v/c = \sqrt{0.0975} \approx 0.3122.

02

A relativistic spacecraft is observed to have contracted to half its proper length (L=0.500L0L = 0.500 L_0). Determine the spacecraft's speed in m/s\text{m/s}, using c=3.00×108 m/sc = 3.00\times 10^8\text{ m/s}.

Answer

v≈2.60×108 m/sv \approx 2.60\times 10^8\text{ m/s}. Key steps: 0.500=1−(v/c)2  ⟹  (v/c)2=1−0.250=0.750  ⟹  v/c=0.750≈0.8660  ⟹  v=0.8660×3.00×108 m/s≈2.60×108 m/s0.500 = \sqrt{1 - (v/c)^2} \implies (v/c)^2 = 1 - 0.250 = 0.750 \implies v/c = \sqrt{0.750} \approx 0.8660 \implies v = 0.8660 \times 3.00\times 10^8\text{ m/s} \approx 2.60\times 10^8\text{ m/s}.

03

An ultra-relativistic cosmic ray muon experiences a length contraction such that L=110L0L = \frac{1}{10}L_0. If an analyst accidentally computes v/c=1−(1/10)2=0.99v/c = 1 - (1/10)^2 = 0.99 instead of taking the square root, what is the percent error in the quantity (1−v/c)(1 - v/c) compared to the true value?

Answer

Percent error ≈80%\approx 80\% (or true 1−v/c≈0.005011 - v/c \approx 0.00501 vs mistaken 0.01000.0100). Key steps: True (v/c)2=1−0.01=0.99  ⟹  v/c=0.99≈0.994987(v/c)^2 = 1 - 0.01 = 0.99 \implies v/c = \sqrt{0.99} \approx 0.994987. The true difference from cc is 1−v/c≈0.0050131 - v/c \approx 0.005013, whereas the mistaken calculation yields 1−0.99=0.011 - 0.99 = 0.01, nearly double the true margin to light speed.

Loading workspace…