Resources
An air traffic controller monitors two radar velocity reports for an evasive test aircraft relative to a standard Cartesian grid where is due East and is due North. The initial report lists as directed at south of west. The pilot then executes a maneuver represented by a vector change of magnitude directed at east of south. Avoiding sign convention pitfalls when resolving quadrant III and IV vectors, evaluate the final velocity vector in unit-vector notation, and determine its compass direction as an angle south of west.
Answer and steps
Final answer
, magnitude , directed at south of west (or standard position angle ).
Steps
Establish the Coordinate System and Sign Conventions
Let the standard Cartesian directions be:
- East:
- West:
- North:
- South:
To resolve each vector accurately, break the motion into horizontal () and vertical () scalar components based on the quadrant each vector occupies.
Resolve the Initial Velocity Vector
The vector has magnitude directed at south of west (Quadrant III):
- The westward component lies along :
- The southward component lies along :
In unit-vector notation:
Resolve the Change in Velocity Vector
The change vector has magnitude directed at east of south (Quadrant IV):
- Common Pitfall: Because the angle is specified relative to the south axis (the negative -axis), the sine function gives the horizontal (eastward) component and the cosine function gives the vertical (southward) component.
- The eastward component lies along :
- The southward component lies along :
In unit-vector notation:
Sum the Components to Find
Add the corresponding - and -components:
Thus, the final velocity vector in unit-vector notation is:
Calculate Magnitude and Direction
- Magnitude:
- Direction (South of West): Since both and , the resultant vector points into Quadrant III (south of west). The acute angle below the negative -axis (west) is:
Therefore, the final velocity is directed at south of west (equivalent to a standard position angle of ).
Typical errors
01 The student routinely pairs cosine with the x-component and sine with the y-component regardless of the reference axis, miscalculating the components of Δv.
Sample Student Work
Reviewed by ACEpath TeacherStep-by-Step Review
Walk Through It with Your Teacher- Step 1
- Step 2Correct
,
The angle is given east of south, which is measured from the south axis (). Therefore, the side adjacent to the angle is vertical (giving the -component via cosine) and the side opposite the angle is horizontal (giving the -component via sine).
- Step 3Correct
You followed the correct vector addition procedure by summing - and -components, but the values were affected by the swapped components of .
- Step 4Correct
Your tangent formula and angle interpretation were methodologically sound, but the final numerical angle propagated the previous component error.
WHAT YOU DID WELL
Compliments from Your TeacherYou correctly handled the negative signs for vectors pointing south and west.
You accurately identified that components along the same coordinate axis add linearly.
You correctly set up the inverse tangent ratio to find the angle south of west.
THE ERROR
Where Your ACEpath Teacher Spotted the MistakeYou automatically assigned cosine to the horizontal component and sine to the vertical component without checking which axis the angle touches.
WHY IT HAPPENED
ACEpath Teacher's DiagnosisRelying on the default rule that always pairs with cosine and always pairs with sine leads to errors when angles are referenced from the vertical (North/South) axis. Drawing a right triangle and identifying opposite vs. adjacent sides prevents this swap.
REASONING PATH
Your ACEpath teacher’s suggested approach- Identify the Reference Axis
If an angle is measured from the vertical axis (North or South), the vertical leg is adjacent () and the horizontal leg is opposite ().
Sketch the vector with its component triangle before writing equations to verify whether the angle touches the -axis or the -axis.
CORRECTED PATH
ACEpath Teacher's DemonstrationCorrectly resolve : and .
Sum with : and .
Compute the angle south of west: .
, directed at
02 The student confuses the direction 'east of south' with 'south of east' or overlooks that eastward displacement is positive in the Cartesian grid, assigning a negative sign to the x-component of Δv.
Sample Student Work
Reviewed by ACEpath TeacherStep-by-Step Review
Walk Through It with Your Teacher- Step 1
- Step 2Correct
You chose the correct trigonometric functions, but because the direction is 'east of south', the horizontal component points toward the east (). Therefore, must be positive.
- Step 3Correct
Your component addition method is correct, but the result is affected by the negative sign in .
- Step 4Correct
Your tangent formula setup is correct, but using the incorrect horizontal component instead of led to an incorrect angle.
WHAT YOU DID WELL
Compliments from Your TeacherYou correctly resolved the Quadrant III vector using negative signs for both west and south components.
You correctly identified that an angle given relative to south means the horizontal component uses the sine function and the vertical component uses the cosine function.
You correctly applied vector component addition and the tangent inverse relation to calculate the angle.
THE ERROR
Where Your ACEpath Teacher Spotted the MistakeYou wrote a negative sign for the eastward component instead of a positive sign.
WHY IT HAPPENED
ACEpath Teacher's DiagnosisOverlooking that 'east of south' places the vector into Quadrant IV, where horizontal displacement is eastward (, ) while vertical displacement is southward (, ).
REASONING PATH
Your ACEpath teacher’s suggested approach- Compass Heading to Quadrant Mapping
East is , West is , North is , and South is .
Always sketch the vector's quadrant first: 'east of south' means start at the negative -axis (South) and swing toward the positive -axis (East), yielding .
CORRECTED PATH
ACEpath Teacher's DemonstrationSet the horizontal component of to positive: .
Add the horizontal components: .
Keep the vertical component: .
Calculate the angle south of west: .
, directed at south of west
03 The student calculates the angle relative to the south axis instead of the west axis, finding the complementary angle west of south.
Sample Student Work
Reviewed by ACEpath TeacherStep-by-Step Review
Walk Through It with Your Teacher- Step 1
- Step 2
- Step 3
- Step 4Correct
An angle measured 'south of west' starts at the west axis () and opens toward the south (). The opposite side is the vertical component and the adjacent side is the horizontal component , so the ratio must be , not .
WHAT YOU DID WELL
Compliments from Your TeacherYou handled the quadrant directions and trigonometry signs for both vectors without any errors.
You correctly combined the component vectors to form the total velocity vector in unit-vector notation.
THE ERROR
Where Your ACEpath Teacher Spotted the MistakeYou set up relative to the vertical (south) axis instead of the horizontal (west) axis requested by 'south of west'.
WHY IT HAPPENED
ACEpath Teacher's DiagnosisIn directional phrasing of the form '[Direction A] of [Direction B]', the reference baseline axis is always Direction B. When measuring an angle relative to the west axis, the vertical component is opposite and the horizontal component is adjacent, requiring . Computing yields the angle 'west of south' instead.
REASONING PATH
Your ACEpath teacher’s suggested approach- Identify the Reference Baseline Axis
In '[Direction A] of [Direction B]', Direction B is the reference axis where .
Draw the reference axis (Direction B) first. For 'south of west', draw the negative -axis (West) as the baseline and swing the angle downward toward South.
- Set Up the Right Triangle Ratio
. The component perpendicular to the baseline is opposite.
Since the baseline is horizontal (West), the vertical side is opposite and is adjacent, giving .
CORRECTED PATH
ACEpath Teacher's DemonstrationIdentify the reference axis: 'south of west' measures from the West axis () toward the South axis ().
Set up the tangent ratio with opposite and adjacent: .
Evaluate the inverse tangent: .
, directed at
Lock it in
When a direction is given as " east of south", which axis does the angle touch, and which component uses ?
The angle touches the South axis (). Therefore, the vertical () component uses (adjacent), and the horizontal () component uses (opposite).
Similar question
A boat travels with a velocity of directed at west of north. Express this velocity vector in unit-vector notation .
Answer
, . In unit-vector notation: .
Two forces act on a ring: directed due East, and directed at west of south. Find the net force in unit-vector notation.
Answer
For : . For : , . Summing components: .
An aircraft has an airspeed of directed at east of north, encountering a crosswind of directed at south of east. Determine the ground velocity vector in unit-vector notation and its compass direction relative to North.
Answer
Plane: , . Wind: , . Resultant: , . . Direction: .