Resources
A straight optical fiber of length features a core index and a cladding index . A pulse of light containing rays of all allowable propagation angles enters the front face from air (). Calculate the travel time for an axial ray propagating parallel to the central axis, and calculate the multipath modal dispersion time spread between the steepest bound ray undergoing total internal reflection at the critical angle and the axial ray. (Speed of light in vacuum ).
Answer and steps
Final answer
; .
Steps
Speed of Light in the Core and Travel Time of the Axial Ray
Light travels through the core of refractive index at a speed given by:
An axial ray travels directly along the central axis of the fiber without undergoing any reflections. Its path length is equal to the length of the fiber, .
The travel time for this fastest ray, , is:
Substitute the given values:
Path Length and Travel Time of the Steepest Bound Ray
The rays entering the fiber at an angle propagate by total internal reflection (TIR) at the core-cladding interface.
The critical angle measured with respect to the normal of the core-cladding boundary satisfies:
The steepest ray that remains guided undergoes total internal reflection at exactly this critical angle . The angle that this ray makes with the central axis of the fiber is complementary to :
Because the ray travels at an angle relative to the axial direction, the total distance traversed by this ray through the core satisfies:
The travel time of this slowest guided ray is:
Multipath Modal Dispersion Time Spread
The pulse broadens because different rays (modes) traverse different path lengths. The maximum transit-time difference between the slowest ray and the fastest ray is:
Substitute the numerical values:
Pitfall to avoid: The critical angle is measured relative to the normal to the core-cladding interface, not the fiber's central axis. Be careful not to confuse with .
Typical errors
01 The student confuses the speed of light in the medium with the speed of light in vacuum when calculating transit times.
Sample Student Work
Reviewed by ACEpath TeacherStep-by-Step Review
Walk Through It with Your Teacher- Step 1Correct
Light propagates inside the fiber core of refractive index , where its speed is reduced to . Dividing the physical path length by instead of underestimates the transit time.
- Step 2
- Step 3Correct
Here again, the propagation takes place in the core with index , so the speed is rather than .
- Step 4Correct
Your subtraction method is correct, but the numerical result is affected by using instead of in both travel times.
WHAT YOU DID WELL
Compliments from Your TeacherYou correctly calculated the critical angle condition at the core-cladding boundary.
You set up the trigonometric relation correctly to find the maximum trajectory length.
You properly identified the time spread as the difference between the longest and shortest transit times .
THE ERROR
Where Your ACEpath Teacher Spotted the MistakeYou divided distance by the vacuum speed of light instead of the medium's propagation speed .
WHY IT HAPPENED
ACEpath Teacher's DiagnosisOverlooking that refractive index slows light down inside a medium (), which means transit times in optical media must always scale with .
REASONING PATH
Your ACEpath teacher’s suggested approach- Speed of light in a dielectric medium
In any medium with refractive index , light travels at , meaning .
Whenever you compute travel times in an optical medium, always multiply the physical distance by (optical path length) before dividing by .
CORRECTED PATH
ACEpath Teacher's DemonstrationRecalculate .
Recalculate .
Subtract the two times: .
;
02 The student misinterprets the critical angle as being measured with respect to the fiber axis rather than the interface normal, using cos(θ_c) = n₂ / n₁ instead of sin(θ_c) = n₂ / n₁.
Sample Student Work
Reviewed by ACEpath TeacherStep-by-Step Review
Walk Through It with Your Teacher- Step 1
- Step 2
- Step 3
- Step 4Correct
Subtracting two very close numbers () caused catastrophic cancellation, magnifying your earlier rounding of and producing instead of the accurate .
WHAT YOU DID WELL
Compliments from Your TeacherYou correctly calculated the speed of light in the core and the travel time of the axial ray.
You correctly related the ray path length to the fiber length using the cosine of the propagation angle relative to the axis.
You correctly recognized that total internal reflection at the critical angle sets the maximum transit time.
THE ERROR
Where Your ACEpath Teacher Spotted the MistakeYou rounded to and to four digits before subtracting nearly equal transit times.
WHY IT HAPPENED
ACEpath Teacher's DiagnosisWhen calculating the difference , the leading significant digits cancel out. Rounding intermediate quantities rather than keeping algebraic expressions or full calculator precision leads to substantial relative error in the final difference.
REASONING PATH
Your ACEpath teacher’s suggested approach- Keep algebraic form before subtracting
Factor out common terms first so you only multiply and divide, avoiding loss of precision from subtracting nearly equal numbers.
- Clarify angle definitions explicitly
Critical angle is measured to the interface normal (), while axial angle is measured to the fiber axis ().
Always state whether your angle is measured from the normal or from the axis to keep your trigonometry transparent.
CORRECTED PATH
ACEpath Teacher's DemonstrationExpress the time spread algebraically: .
Substitute the exact values: .
Evaluate without premature rounding: .
,
03 The student assumes the slowest ray simply travels at the speed corresponding to the cladding index n₂ through the length L rather than accounting for the longer zigzag geometric path in the core.
Sample Student Work
Reviewed by ACEpath TeacherStep-by-Step Review
Walk Through It with Your Teacher- Step 1
- Step 2Correct
Bound rays travel entirely through the core at speed , reflecting off the cladding boundary via total internal reflection. The extra transit time comes from the longer geometric zigzag distance , not from propagation inside the cladding.
- Step 3Correct
Because your value for was based on the cladding speed rather than the geometric path length in the core, the resulting time spread was inaccurate and required an absolute value to stay positive.
WHAT YOU DID WELL
Compliments from Your TeacherYou correctly used the definition of refractive index to calculate the propagation velocity in the core.
You accurately found the transit time for the straight axial ray.
THE ERROR
Where Your ACEpath Teacher Spotted the Mistakeno
WHY IT HAPPENED
ACEpath Teacher's DiagnosisYou treated the cladding index as defining the speed of the slowest ray rather than defining the critical reflection angle that dictates the ray's longer zigzag path length through the core.
REASONING PATH
Your ACEpath teacher’s suggested approach- Where does guided light travel?
Guided rays stay inside the core; total internal reflection confines them so their propagation speed is always .
Always use the core index when converting path distance inside the core to travel time.
- How does the cladding index enter the calculation?
The cladding index determines the critical angle at the boundary: .
Relate the axial distance to the actual ray trajectory distance .
CORRECTED PATH
ACEpath Teacher's DemonstrationFind the angle between the steepest ray and the fiber axis: .
Determine the total path length: .
Calculate travel time using the core speed : .
Compute the modal dispersion: .
,
Lock it in
What is the speed of light in a transparent dielectric core of refractive index ?
. Light slows down by a factor of relative to vacuum.
Similar question
A straight optical fiber of length has a core with refractive index . Calculate the travel time for an axial ray propagating along the center of the fiber. ().
Answer
. Key steps: Speed in core is . Thus, .
An optical fiber of length has core index and cladding index . Find the modal dispersion time spread for light pulses guided through this fiber.
Answer
. Key steps: .
A step-index optical fiber has . To ensure that modal dispersion does not exceed , determine the minimum allowable cladding refractive index .
Answer
. Key steps: . Here . Thus .