Resources
A rescue beacon is fired from flat ground by a survey team and lands back on the ground at a horizontal distance of from the launch position. A tracking sensor records the maximum vertical altitude of the beacon during flight to be . Assuming free-fall motion with and negligible air resistance, determine: (a) the launch angle above the horizontal, (b) the initial launch speed , and (c) the total flight duration .
Answer and steps
Final answer
(a) ; (b) ; (c)
Steps
Relate maximum height and horizontal range to find the launch angle
For a projectile launched from level ground with an initial speed at an angle above the horizontal:
- The maximum vertical height is reached when the vertical velocity component is zero:
- The total horizontal range is given by:
Dividing by eliminates and :
Rearranging gives the direct relationship between trajectory dimensions and launch angle:
Substitute the given values and :
Determine the initial vertical velocity and the total flight time
At the apex of the trajectory, the vertical velocity becomes zero under downward acceleration :
Substitute and :
Because the ground is level, the total flight time is twice the time required to reach the peak:
Calculate the initial launch speed
Using the vertical component :
Substitute and :
(Pitfall: Avoid using with independently rounded intermediate values, as slight rounding differences can shift the final decimal place. Always keep sufficient precision until the final step.)
Typical errors
01 The student forgets the factor of 4 connecting range and height, erroneously assuming tan θ = H / R as if the trajectory were a simple right triangle.
Sample Student Work
Reviewed by ACEpath TeacherStep-by-Step Review
Walk Through It with Your Teacher- Step 1Correct
You treated the trajectory as a right triangle with height and base . Because a projectile follows a parabolic path, the ratio of maximum height to total range includes a factor of 4: , so .
- Step 2
- Step 3Correct
Your relationship is mathematically sound, but substituting the incorrect angle from Step 1 produced an overstated launch speed.
- Step 4
WHAT YOU DID WELL
Compliments from Your TeacherYou correctly used kinematic energy relations to determine the initial vertical velocity component from the peak height.
You accurately computed the total time of flight using vertical symmetry and .
THE ERROR
Where Your ACEpath Teacher Spotted the Mistakenone
WHY IT HAPPENED
ACEpath Teacher's DiagnosisYou assumed the ratio of maximum height to total range equals , forgetting that the slope of a parabolic trajectory at launch is four times steeper than the ratio of peak altitude to total span.
REASONING PATH
Your ACEpath teacher’s suggested approach- Ratio of Height to Range in Level Projectiles
For any level-ground projectile, , so .
Always derive or recall the factor of 4 before finding the launch angle from trajectory dimensions.
- Sanity Check on Launch Speed
For a given vertical velocity , an underestimated launch angle forces to blow up.
Check whether a shallow angle like could realistically reach a height of nearly over a horizontal span of only .
CORRECTED PATH
ACEpath Teacher's DemonstrationApply the trajectory ratio formula: .
Solve for the launch angle: .
Recalculate the initial launch speed: .
(a) ; (b) ; (c)
02 The student uses the kinematic formula for time to reach peak height, T = v_0y / g, omitting the factor of 2 required for the full round-trip flight duration.
Sample Student Work
Reviewed by ACEpath TeacherStep-by-Step Review
Walk Through It with Your Teacher- Step 1
- Step 2
- Step 3Correct
The formula gives only the time required to reach peak altitude. Because the projectile launches and lands on level ground, the total round-trip flight duration is .
WHAT YOU DID WELL
Compliments from Your TeacherYou correctly derived and applied the trajectory ratio .
You accurately computed the initial vertical velocity component using conservation of energy and kinematics.
You correctly solved for the initial speed from its vertical component.
THE ERROR
Where Your ACEpath Teacher Spotted the MistakeYou used the formula for the time to reach peak altitude instead of the total flight duration.
WHY IT HAPPENED
ACEpath Teacher's DiagnosisConflating the time to reach the apex with the full time of flight for symmetric level-ground projectile motion.
REASONING PATH
Your ACEpath teacher’s suggested approach- Apex Time vs. Total Flight Time
For a projectile returning to its launch elevation, vertical motion is symmetric: .
Always multiply the ascent time by when finding the total flight time over level ground: .
CORRECTED PATH
ACEpath Teacher's DemonstrationState the symmetry condition for level-ground projectile flight: .
Substitute and : .
Evaluate the expression: .
(a) ; (b) ; (c)
03 The student confuses the vertical velocity component with the total initial speed, setting v_0 = √(2gH) rather than dividing by sin θ.
Sample Student Work
Reviewed by ACEpath TeacherStep-by-Step Review
Walk Through It with Your Teacher- Step 1
- Step 2Correct
The expression gives only the initial vertical velocity component , because vertical motion alone determines peak height. To find the total launch speed , you need to divide by .
- Step 3Correct
Your formula is correct, but because you assigned to rather than recognizing it was already , you multiplied by a second time.
WHAT YOU DID WELL
Compliments from Your TeacherYou correctly derived and applied the formula to solve for the launch angle.
You correctly identified the kinematic relationship linking peak height to gravitational acceleration and vertical speed.
You used the correct equation for symmetric level-ground projectile flight time.
THE ERROR
Where Your ACEpath Teacher Spotted the MistakeYou labeled the vertical velocity component as the total initial speed .
WHY IT HAPPENED
ACEpath Teacher's DiagnosisConfusing 1D vertical kinematic quantities with 2D total velocity vectors leads to treating as the magnitude of rather than as .
REASONING PATH
Your ACEpath teacher’s suggested approach- Link 1D kinematics strictly to components
Only vertical velocity components govern vertical displacement: .
Whenever applying along the vertical axis, always attach the subscript to prevent confusing it with total speed.
- Reconstruct total velocity from components
.
Check that the total speed is strictly greater than both and for any launch angle between and .
CORRECTED PATH
ACEpath Teacher's DemonstrationIdentify that vertical kinematics at the apex yields the initial vertical component: .
Find total launch speed using trigonometry: .
Compute the total flight time directly from : .
(a) ; (b) ; (c)
Lock it in
What is the exact mathematical relationship between maximum height , range , and launch angle for a level projectile?
. This comes from dividing by .
Similar question
A football is kicked from level turf and achieves a horizontal range of and a maximum altitude of . Using , find: (a) the launch angle , and (b) the initial launch speed .
Answer
(a) ; (b) . Key steps: . Then , so .
A golf ball is launched on a flat fairway. It stays airborne for and reaches a maximum height of . Taking , determine: (a) the horizontal range , and (b) the launch angle .
Answer
(a) (or depending on ); specifically, . We verify . If the launch angle is , then . If instead range is given as , .
An artillery shell is fired over level ground. An observer measures that its maximum vertical height is exactly one-third of its total horizontal range (). Calculate: (a) the launch angle , and (b) the ratio of the shell's speed at apex to its initial launch speed ().
Answer
(a) ; (b) . Key steps: (a) . (b) At the apex, , so . For a 3-4-5 right triangle with , , hence .