Resources
A slab of mass rests on a frictionless horizontal floor. A smaller block of mass is placed on top of the slab. The coefficient of static friction between the block and the slab is , and the coefficient of kinetic friction is . A horizontal force directed to the right is applied directly to the bottom slab. Take . (a) Determine the threshold magnitude of the applied force beyond which the top block slips relative to the slab. (b) At this exact impending slip threshold, identify the magnitude, direction, and recipient body of the Newton's third law reaction partner to the static friction force accelerating the top block.
Answer and steps
Final answer
(a) ; (b) The reaction force is the static friction force exerted by the top block on the bottom slab, having a magnitude of directed to the left, acting on the bottom slab.
Steps
Part (a): Finding the Maximum Applied Force
- Identify the force causing the top block to accelerate:
The top block of mass has no external pulling force directly applied to it. The only horizontal force acting on it is the static friction force exerted by the bottom slab. Therefore, the maximum horizontal acceleration the top block can experience without slipping is determined solely by the maximum available static friction : Since there is no vertical acceleration, the normal force on the block is: - Calculate the maximum acceleration without slipping:
Applying Newton's second law to the top block: -
Treat the combined system at impending slip:
Right at the slip threshold, both masses accelerate together at as a single composite system of mass : Substitute the given values:Common Pitfall: Do not use the kinetic friction coefficient for impending slip. Slip has not yet occurred, so the contact surfaces remain mutually at rest, which requires the static friction coefficient .
Part (b): Identifying the Newton's Third Law Reaction Partner
- Action Force Definition:
The static friction force acting on the top block is: It has a magnitude of and points to the right (in the direction of acceleration). -
Newton's Third Law Pair:
Newton's third law states that if body exerts a force on body , then body exerts an equal and opposite force on body :- Magnitude: Equal to the action force, .
- Direction: Directed horizontally to the left (opposing the relative motion tendency of the slab).
- Recipient body: The bottom slab .
Typical errors
01 The student uses the kinetic friction coefficient instead of the static friction coefficient to determine the maximum force before slipping occurs.
Sample Student Work
Reviewed by ACEpath TeacherStep-by-Step Review
Walk Through It with Your Teacher- Step 1Correct
You used the kinetic friction coefficient . Because the block and slab are still moving together without relative sliding right at the threshold of slipping, you need to use the coefficient of static friction .
- Step 2Correct
Your formula is correct, but your calculated acceleration inherits the incorrect friction force from Step 1.
- Step 3Correct
You correctly treated the two blocks as a combined composite system of mass , but the final force value is lower than expected due to the earlier friction coefficient error.
- Step 4Correct
You accurately identified both the direction (to the left) and the recipient body (bottom slab) for the third law pair, but the numerical magnitude reflects your earlier friction calculation.
WHAT YOU DID WELL
Compliments from Your TeacherYou correctly recognized that static friction on the top block provides its forward acceleration.
You applied Newton's second law to the combined system to determine the total required pulling force.
You correctly identified that the third law reaction force acts on the bottom slab and points opposite to the friction force on the top block.
THE ERROR
Where Your ACEpath Teacher Spotted the MistakeYou substituted the coefficient of kinetic friction instead of static friction .
WHY IT HAPPENED
ACEpath Teacher's DiagnosisYou associated impending slip with kinetic friction because motion is about to occur, overlooking that the surfaces remain mutually at rest relative to each other until slip actually begins.
REASONING PATH
Your ACEpath teacher’s suggested approach- Check Relative Surface Motion
If two surfaces are moving together with zero relative velocity at the contact interface, friction between them is static, even if both objects are accelerating relative to the ground.
Always use for threshold or 'impending slip' conditions, and reserve for cases where relative sliding is already occurring.
- Third Law Reaction Partners
If object exerts friction force on object , then object exerts on object .
Ensure the reaction partner has the identical magnitude, acts along the exact opposite direction, and acts on the other interacting body.
CORRECTED PATH
ACEpath Teacher's Demonstration(a) ; (b) Magnitude , directed to the left, acting on the bottom slab.
02 The student incorrectly assumes that the threshold force F_max is simply equal to the maximum static friction force between the block and the slab.
Sample Student Work
Reviewed by ACEpath TeacherStep-by-Step Review
Walk Through It with Your Teacher- Step 1
- Step 2Correct
You set the applied force equal to the internal friction force . Because the bottom slab rests on a frictionless floor, the applied force must accelerate both masses together up to the maximum common acceleration .
- Step 3
WHAT YOU DID WELL
Compliments from Your TeacherYou correctly computed the maximum static friction force acting on the top block using .
You correctly applied Newton's third law to find the magnitude, direction, and recipient body of the friction reaction force.
THE ERROR
Where Your ACEpath Teacher Spotted the MistakeSetting as if the slab were held fixed in static equilibrium.
WHY IT HAPPENED
ACEpath Teacher's DiagnosisTreating an accelerating coupled system as a static equilibrium problem where pulling force equals friction, instead of applying Newton's second law to the combined accelerating system.
REASONING PATH
Your ACEpath teacher’s suggested approach- Identify What Accelerates the Coupled System
In stacked-block problems on a frictionless surface, the external force accelerates the combined mass , while friction is an internal contact force that accelerates the unpulled block.
First find the maximum acceleration of the unpulled block using , then multiply by the total system mass: .
CORRECTED PATH
ACEpath Teacher's DemonstrationFind the maximum horizontal acceleration of the top block before slipping: .
Apply Newton's second law to the combined system moving at this maximum acceleration: .
Substitute the masses: .
(a) ; (b) Magnitude: , Direction: to the left, Recipient body: bottom slab
03 The student misidentifies the normal force on the block or floor as the Newton's third law reaction partner to the friction force.
Sample Student Work
Reviewed by ACEpath TeacherStep-by-Step Review
Walk Through It with Your Teacher- Step 1
- Step 2
- Step 3Correct
You calculated the normal force between the block and the slab instead of identifying the reaction partner to the friction force. An action-reaction pair must represent the exact same interaction: if the slab exerts a static friction force of to the right on the block, the block must exert a static friction force of to the left on the slab.
WHAT YOU DID WELL
Compliments from Your TeacherYou correctly used the static friction coefficient to find the maximum horizontal force on the top block.
You correctly applied Newton's second law to the combined mass at the slip threshold.
THE ERROR
Where Your ACEpath Teacher Spotted the MistakeYou calculated the vertical contact normal force rather than the horizontal contact friction force.
WHY IT HAPPENED
ACEpath Teacher's DiagnosisYou associated the term 'reaction force' with the normal force () rather than applying the definition of a Newton's third law pair, which states that the reaction to is always an equal and opposite force of the same type, .
REASONING PATH
Your ACEpath teacher’s suggested approach- Action-Reaction Identity Rule
Every Newton's third law pair involves the same two bodies and the same physical type of force: .
To find the reaction partner to 'slab pushes block via friction to the right', simply swap the agent and recipient: 'block pushes slab via friction to the left' with equal magnitude.
CORRECTED PATH
ACEpath Teacher's DemonstrationIdentify the original action force: the static friction force exerted by the bottom slab on the top block, , which equals directed to the right.
Apply Newton's third law by swapping the agent and recipient while reversing the direction: .
State the magnitude (), direction (to the left), and recipient body (bottom slab).
(a) ; (b) Magnitude: , Direction: to the left, Recipient body: bottom slab
Lock it in
Which friction coefficient should you use to find the threshold force just before two stacked objects begin to slip relative to each other?
Use the static friction coefficient . Until slip actually occurs, the contact surfaces are at rest relative to one another.
Similar question
A book sits on a horizontal wooden tray of mass . The coefficient of static friction between the book and tray is , and the tray rests on a frictionless table. What maximum horizontal force can be applied to the tray so that the book does not slip? (Use .)
Answer
. Key steps: ; .
Two blocks are stacked on a frictionless floor: bottom block and top block . The friction coefficients between the blocks are and . A pulling force is applied to . (a) Does the top block slip? (b) State the magnitude and direction of the friction force acting on the top block.
Answer
(a) No, it does not slip. (b) to the right. Key steps: Assuming no slip, . The required force on is . The maximum available static friction is . Since , no slip occurs.
In a two-tier block system ( on top of on a frictionless surface), a horizontal force pulls the bottom slab. The coefficients between the blocks are and . Once exceeds and the blocks slip relative to each other, identify the magnitude and direction of the friction force exerted by the top block on the bottom slab. Take .
Answer
directed to the left. Key steps: Once relative motion begins, kinetic friction acts: . By Newton's third law, the top block exerts an equal and opposite force directed to the left on the bottom slab.