Resources

A digital acquisition system monitors micro-vibrations of a cantilever beam. The exported displacement-time graph displays displacement in micrometers (μm\mu\text{m}) versus time in milliseconds (ms\text{ms}). The waveform shows a peak-to-peak vertical envelope of 86.0 μm86.0\,\mu\text{m}. Exactly 1414 complete cycles span an elapsed time interval of 35.0 ms35.0\text{ ms}. If these transverse vibrations generate an acoustic disturbance in an adjacent medium where the speed of sound is c=1.48 km/sc = 1.48\text{ km/s}, calculate: (a) the amplitude in millimeters (mm\text{mm}), (b) the oscillation frequency in kilohertz (kHz\text{kHz}), and (c) the acoustic wavelength in the medium in centimeters (cm\text{cm}).

Answer and steps

Final answer

(a) A=0.0430 mmA = 0.0430\text{ mm}, (b) f=0.400 kHzf = 0.400\text{ kHz}, (c) λ=370 cm\lambda = 370\text{ cm}

Steps

Part (a): Determine the Amplitude

The peak-to-peak value represents the total displacement from the lowest trough to the highest peak. The amplitude AA is the maximum displacement from the central equilibrium position, which is half of the peak-to-peak value:

A=Peak-to-Peak Value2A = \frac{\text{Peak-to-Peak Value}}{2}

Substitute the given value of 86.0 μm86.0\,\mu\text{m}:

A=86.0 μm2=43.0 μmA = \frac{86.0\,\mu\text{m}}{2} = 43.0\,\mu\text{m}

Convert the amplitude into millimeters (mm\text{mm}), where 1 mm=1000 μm1\,\text{mm} = 1000\,\mu\text{m}:

A=43.0 μm1000 μm/mm=0.0430 mmA = \frac{43.0\,\mu\text{m}}{1000\,\mu\text{m/mm}} = 0.0430\text{ mm}

Common Pitfall: Confusing the full vertical span (peak-to-peak) with the wave amplitude. Always remember that amplitude is measured from the center line to a peak, not peak to trough.


Part (b): Determine the Oscillation Frequency

The period TT of one complete cycle is the total elapsed time divided by the number of cycles NN:

T=ΔtN=35.0 ms14=2.50 msT = \frac{\Delta t}{N} = \frac{35.0\text{ ms}}{14} = 2.50\text{ ms}

Frequency ff is the reciprocal of the period:

f=1T=12.50 ms=0.400 ms−1=0.400 kHzf = \frac{1}{T} = \frac{1}{2.50\text{ ms}} = 0.400\text{ ms}^{-1} = 0.400\text{ kHz}

In standard SI units, this corresponds to:

f=0.400×103 Hz=400 Hzf = 0.400 \times 10^3\text{ Hz} = 400\text{ Hz}


Part (c): Determine the Acoustic Wavelength

The relationship between wave speed cc, frequency ff, and wavelength λ\lambda is:

c=f⋅λ  ⟹  λ=cfc = f \cdot \lambda \implies \lambda = \frac{c}{f}

First, express the wave speed in standard units (m/s\text{m/s}):

c=1.48 km/s=1480 m/sc = 1.48\text{ km/s} = 1480\text{ m/s}

Now, compute the wavelength:

λ=1480 m/s400 Hz=3.70 m\lambda = \frac{1480\text{ m/s}}{400\text{ Hz}} = 3.70\text{ m}

Finally, convert the wavelength to centimeters (cm\text{cm}):

λ=3.70 m×100 cm/m=370 cm\lambda = 3.70\text{ m} \times 100\text{ cm/m} = 370\text{ cm}

Typical errors

OverviewACEpath Teacher's Diagnosis

01 The student confuses peak-to-peak displacement with amplitude, omitting the factor of two and resulting in an amplitude of 0.0860 mm.

Sample Student Work

Reviewed by ACEpath Teacher
Step-by-Step Review
Walk Through It with Your Teacher
Partially correct
  1. Step 1

    A=86.0 μm  ⟹  A=86.0×10−3 mm=0.0860 mmA = 86.0\,\mu\text{m} \implies A = 86.0 \times 10^{-3}\text{ mm} = 0.0860\text{ mm}

    Correct

    A=86.0 μm2=43.0 μm=0.0430 mmA = \frac{86.0\,\mu\text{m}}{2} = 43.0\,\mu\text{m} = 0.0430\text{ mm}

    The value 86.0 μm86.0\,\mu\text{m} is the peak-to-peak envelope (from lowest trough to highest crest). Wave amplitude is defined as the maximum displacement from the central equilibrium axis, which equals half of the peak-to-peak distance.

  2. Step 2

    f=1435.0 ms=0.400 kHzf = \frac{14}{35.0\text{ ms}} = 0.400\text{ kHz}

  3. Step 3

    c=1.48 km/s=1480 m/s  ⟹  λ=cf=1480400=3.70 m=370 cmc = 1.48\text{ km/s} = 1480\text{ m/s} \implies \lambda = \frac{c}{f} = \frac{1480}{400} = 3.70\text{ m} = 370\text{ cm}

WHAT YOU DID WELL
Compliments from Your Teacher

You correctly calculated the oscillation frequency using the cycle count and elapsed time.

You accurately converted units between kilometers per second, meters, and centimeters when solving for wavelength.

You correctly applied the wave relationship λ=cf\lambda = \frac{c}{f}.

THE ERROR
Where Your ACEpath Teacher Spotted the Mistake
Peak-to-Peak vs Amplitude Confusion

no

WHY IT HAPPENED
ACEpath Teacher's Diagnosis

Treating the total vertical crest-to-trough distance (peak-to-peak envelope) as the wave amplitude, rather than taking the displacement from the centerline equilibrium position.

REASONING PATH
Your ACEpath teacher’s suggested approach
Amplitude Definition
  • Amplitude AA measures displacement from equilibrium to a crest or trough: A=ypeak-to-peak2A = \frac{y_{\text{peak-to-peak}}}{2}.

  • Whenever a problem specifies a 'peak-to-peak envelope' or 'crest-to-trough distance', divide by 22 before continuing.

CORRECTED PATH
ACEpath Teacher's Demonstration
  1. Identify the peak-to-peak vertical envelope: yp-p=86.0 μmy_{\text{p-p}} = 86.0\,\mu\text{m}.

  2. Compute the wave amplitude from equilibrium: A=86.0 μm2=43.0 μmA = \frac{86.0\,\mu\text{m}}{2} = 43.0\,\mu\text{m}.

  3. Convert micrometers to millimeters: 43.0 μm×10−3 mm/μm=0.0430 mm43.0\,\mu\text{m} \times 10^{-3}\text{ mm/}\mu\text{m} = 0.0430\text{ mm}.

Final answer

(a) A=0.0430 mmA = 0.0430\text{ mm}, (b) f=0.400 kHzf = 0.400\text{ kHz}, (c) λ=370 cm\lambda = 370\text{ cm}

NEXT STEPS
Final Takeaways from Your Teacher
  • Sketch a horizontal dashed line at y=0y = 0 (equilibrium) on waveform sketches to remind yourself that amplitude is only the upper or lower half of the total height.

  • Highlight terms like 'peak-to-peak', 'total envelope', or 'crest-to-trough' in problem statements as triggers to divide by 22.

OverviewACEpath Teacher's Diagnosis

02 The student inverts the frequency definition by calculating period instead of frequency, obtaining 2.50 kHz instead of 0.400 kHz.

Sample Student Work

Reviewed by ACEpath Teacher
Step-by-Step Review
Walk Through It with Your Teacher
Partially correct
  1. Step 1

    A=86.0 μm/2=43.0 μm=0.0430 mmA = 86.0\,\mu\text{m}/2 = 43.0\,\mu\text{m} = 0.0430\text{ mm}

  2. Step 2

    f=35.014=2.50 kHzf = \frac{35.0}{14} = 2.50\text{ kHz}

    Correct

    T=35.0 ms14=2.50 ms  ⟹  f=1T=1435.0 ms=0.400 kHzT = \frac{35.0\text{ ms}}{14} = 2.50\text{ ms} \implies f = \frac{1}{T} = \frac{14}{35.0\text{ ms}} = 0.400\text{ kHz}

    You divided total elapsed time by the number of cycles, which gives the wave period T=2.50 msT = 2.50\text{ ms}, not the frequency. Frequency is the number of cycles per unit time (f=N/Δt=1/Tf = N / \Delta t = 1/T), which yields 0.400 kHz0.400\text{ kHz}.

  3. Step 3

    λ=cf=(1.48 km/s)(2.50 kHz)=0.592 m=59.2 cm\lambda = \frac{c}{f} = \frac{(1.48\text{ km/s})}{(2.50\text{ kHz})} = 0.592\text{ m} = 59.2\text{ cm}

    Correct

    λ=cf=1480 m/s400 Hz=3.70 m=370 cm\lambda = \frac{c}{f} = \frac{1480\text{ m/s}}{400\text{ Hz}} = 3.70\text{ m} = 370\text{ cm}

    You used the correct physical formula λ=c/f\lambda = c/f and handled the unit conversions consistently, but your final answer was affected by the incorrect frequency from part (b).

WHAT YOU DID WELL
Compliments from Your Teacher

You recognized that amplitude is half of the peak-to-peak envelope.

You performed accurate metric prefix conversions between micrometers and millimeters.

You correctly recalled and arranged the wave speed relation λ=c/f\lambda = c/f.

THE ERROR
Where Your ACEpath Teacher Spotted the Mistake
Inverting frequency and period definitions

You set up elapsed time divided by cycles as frequency rather than period.

WHY IT HAPPENED
ACEpath Teacher's Diagnosis

You conflated period (T=time/cycleT = \text{time}/\text{cycle}) with frequency (f=cycles/timef = \text{cycles}/\text{time}), directly assigning the calculated value of TT to ff with frequency units.

REASONING PATH
Your ACEpath teacher’s suggested approach
Period vs. Frequency Definition
  • Period T=ΔtNT = \frac{\Delta t}{N} is the duration of one cycle (seconds per cycle), whereas frequency f=NΔt=1Tf = \frac{N}{\Delta t} = \frac{1}{T} is the number of cycles per second (Hertz).

  • Always verify units before labeling: if you divide time by count, you have found time per cycle (TT). Take the reciprocal to find frequency (ff).

Unit Reciprocal Check
  • A period measured in milliseconds (ms\text{ms}) inverts to kilohertz (kHz\text{kHz}): 11 ms=1 kHz\frac{1}{1\text{ ms}} = 1\text{ kHz}.

  • Check that f=12.50 ms=0.400 kHzf = \frac{1}{2.50\text{ ms}} = 0.400\text{ kHz} rather than carrying the number 2.502.50 straight into kHz\text{kHz}.

CORRECTED PATH
ACEpath Teacher's Demonstration
  1. Calculate frequency using f=NΔt=1435.0 ms=0.400 kHz=400 Hzf = \frac{N}{\Delta t} = \frac{14}{35.0\text{ ms}} = 0.400\text{ kHz} = 400\text{ Hz}.

  2. Convert wave speed to SI base units: c=1.48 km/s=1480 m/sc = 1.48\text{ km/s} = 1480\text{ m/s}.

  3. Compute wavelength: λ=cf=1480 m/s400 Hz=3.70 m\lambda = \frac{c}{f} = \frac{1480\text{ m/s}}{400\text{ Hz}} = 3.70\text{ m}.

  4. Convert wavelength to centimeters: λ=3.70 m×100 cm/m=370 cm\lambda = 3.70\text{ m} \times 100\text{ cm/m} = 370\text{ cm}.

Final answer

(a) A=0.0430 mmA = 0.0430\text{ mm}, (b) f=0.400 kHzf = 0.400\text{ kHz}, (c) λ=370 cm\lambda = 370\text{ cm}

NEXT STEPS
Final Takeaways from Your Teacher
  • Review the distinction between period (T=Δt/NT = \Delta t / N) and frequency (f=N/Δtf = N / \Delta t).

  • Practice converting between time intervals per cycle and cycles per second using unit analysis.

  • Rework wave speed calculations by explicitly writing out units for each variable before evaluating.

OverviewACEpath Teacher's Diagnosis

03 The student misconverts the wave speed into SI units as 148 m/s instead of 1480 m/s, yielding a wavelength of 37.0 cm.

Sample Student Work

Reviewed by ACEpath Teacher
Step-by-Step Review
Walk Through It with Your Teacher
Partially correct
  1. Step 1

    A=86.0 μm/2=43.0 μm=0.0430 mmA = 86.0\,\mu\text{m} / 2 = 43.0\,\mu\text{m} = 0.0430\text{ mm}

  2. Step 2

    f=1435.0×10−3 s=400 Hz=0.400 kHzf = \frac{14}{35.0 \times 10^{-3}\text{ s}} = 400\text{ Hz} = 0.400\text{ kHz}

  3. Step 3

    c=1.48 km/s=148 m/sc = 1.48\text{ km/s} = 148\text{ m/s}

    Correct

    c=1.48 km/s=1.48×103 m/s=1480 m/sc = 1.48\text{ km/s} = 1.48 \times 10^3\text{ m/s} = 1480\text{ m/s}

    The prefix kilo- represents a factor of 10310^3 (10001000), so 1.48 km/s1.48\text{ km/s} corresponds to 1480 m/s1480\text{ m/s}, not 148 m/s148\text{ m/s}.

  4. Step 4

    λ=cf=148400=0.370 m=37.0 cm\lambda = \frac{c}{f} = \frac{148}{400} = 0.370\text{ m} = 37.0\text{ cm}

    Correct

    λ=cf=1480 m/s400 Hz=3.70 m=370 cm\lambda = \frac{c}{f} = \frac{1480\text{ m/s}}{400\text{ Hz}} = 3.70\text{ m} = 370\text{ cm}

    Your wave formula and subsequent arithmetic were carried out correctly, but the result inherited the ten-fold error from the speed conversion.

WHAT YOU DID WELL
Compliments from Your Teacher

You correctly distinguished amplitude from peak-to-peak span and converted micrometers to millimeters.

You used the cycle count and elapsed time to find the exact frequency in both hertz and kilohertz.

You selected the correct physical relationship λ=cf\lambda = \frac{c}{f} connecting wave speed, frequency, and wavelength.

THE ERROR
Where Your ACEpath Teacher Spotted the Mistake
Metric prefix conversion error

You accidentally multiplied 1.481.48 by 100100 instead of 10001000 when converting kilometers per second into meters per second.

WHY IT HAPPENED
ACEpath Teacher's Diagnosis

Confusing the metric prefix kilo- (103=100010^3 = 1000) with hecto- or the centimeter-to-meter conversion factor of 100100.

REASONING PATH
Your ACEpath teacher’s suggested approach
SI Prefix Check
  • The prefix kilo- (k) always means 103=100010^3 = 1000, so 1 km=1000 m1\text{ km} = 1000\text{ m}.

  • Write out the scientific notation 1.48×103 m/s1.48 \times 10^3\text{ m/s} before converting to standard decimal form.

Physical Reality Check
  • The speed of sound in liquids or solids is typically on the order of 1000 to 5000 m/s1000\text{ to }5000\text{ m/s}, whereas sound in air is around 340 m/s340\text{ m/s}.

  • Verify whether a speed of 148 m/s148\text{ m/s} is unrealistically slow for an adjacent medium specified as 1.48 km/s1.48\text{ km/s}.

CORRECTED PATH
ACEpath Teacher's Demonstration
  1. Convert the wave speed to SI base units using 1 km=1000 m1\text{ km} = 1000\text{ m}: c=1.48 km/s=1480 m/sc = 1.48\text{ km/s} = 1480\text{ m/s}.

  2. Substitute c=1480 m/sc = 1480\text{ m/s} and f=400 Hzf = 400\text{ Hz} into the wave relation: λ=cf=1480400=3.70 m\lambda = \frac{c}{f} = \frac{1480}{400} = 3.70\text{ m}.

  3. Convert the resulting wavelength into centimeters: λ=3.70 m×100 cm/m=370 cm\lambda = 3.70\text{ m} \times 100\text{ cm/m} = 370\text{ cm}.

Final answer

(a) A=0.0430 mmA = 0.0430\text{ mm}, (b) f=0.400 kHzf = 0.400\text{ kHz}, (c) λ=370 cm\lambda = 370\text{ cm}

NEXT STEPS
Final Takeaways from Your Teacher
  • Review standard SI prefixes from micro- (10−610^{-6}) up to mega- (10610^6).

  • Practice converting compound units like km/s\text{km/s} directly to m/s\text{m/s} using scientific notation.

  • Solve the practice problems below to master wave parameter conversions.

Lock it in

Similar question

01

A surface acoustic wave probe displays a displacement waveform with a peak-to-peak vertical envelope of 150 μm150\,\mu\text{m}. Find the amplitude of the wave in millimeters.

Answer

A=0.075 mmA = 0.075\text{ mm}. Amplitude is half of the peak-to-peak value: A=150 μm2=75 μmA = \frac{150\,\mu\text{m}}{2} = 75\,\mu\text{m}. Converting to millimeters yields 75×10−3 mm=0.075 mm75 \times 10^{-3}\text{ mm} = 0.075\text{ mm}.

02

An oscilloscope traces a periodic pressure wave with a peak-to-peak envelope of 6.40 kPa6.40\text{ kPa}. Exactly 2525 cycles occur in 5.00 ms5.00\text{ ms}. If sound travels at 340 m/s340\text{ m/s} in the medium, find: (a) the pressure amplitude in kPa\text{kPa}, and (b) the wavelength in centimeters.

Answer

(a) A=3.20 kPaA = 3.20\text{ kPa}, (b) λ=6.80 cm\lambda = 6.80\text{ cm}. Peak-to-peak pressure gives amplitude A=6.40 kPa2=3.20 kPaA = \frac{6.40\text{ kPa}}{2} = 3.20\text{ kPa}. Frequency is f=255.00 ms=5.00 kHz=5000 Hzf = \frac{25}{5.00\text{ ms}} = 5.00\text{ kHz} = 5000\text{ Hz}. Wavelength is λ=cf=340 m/s5000 Hz=0.0680 m=6.80 cm\lambda = \frac{c}{f} = \frac{340\text{ m/s}}{5000\text{ Hz}} = 0.0680\text{ m} = 6.80\text{ cm}.

03

A transverse wave on a string travels at 18.0 m/s18.0\text{ m/s}. The vertical distance from crest to trough is 24.0 mm24.0\text{ mm}, and the horizontal distance between a crest and the immediate next trough is 45.0 cm45.0\text{ cm}. Determine the wave amplitude in millimeters and the wave frequency in hertz.

Answer

Amplitude A=12.0 mmA = 12.0\text{ mm}, frequency f=20.0 Hzf = 20.0\text{ Hz}. The crest-to-trough vertical span is peak-to-peak, so A=24.0 mm2=12.0 mmA = \frac{24.0\text{ mm}}{2} = 12.0\text{ mm}. The crest-to-trough horizontal distance is half a wavelength (λ2=45.0 cm\frac{\lambda}{2} = 45.0\text{ cm}), giving λ=90.0 cm=0.900 m\lambda = 90.0\text{ cm} = 0.900\text{ m}. Thus f=vλ=18.0 m/s0.900 m=20.0 Hzf = \frac{v}{\lambda} = \frac{18.0\text{ m/s}}{0.900\text{ m}} = 20.0\text{ Hz}.

Loading workspace…