Resources
A student stands in front of a vertical planar wall mirror of height . A common intuitive misconception is that walking backwards away from the mirror allows the student to see more of their full body. (a) If a person of total height whose eyes are located above the floor looks into a vertical planar mirror, derive the minimum vertical mirror height required for the person to see their complete head-to-toe reflection. (b) Prove mathematically whether this required minimum mirror height increases, decreases, or remains strictly invariant as the person's distance from the mirror changes.
Answer and steps
Final answer
(a) (with the bottom edge positioned at half the eye level, from the floor); (b) remains strictly invariant with respect to distance because the similar triangles formed by the incident and reflected rays scale proportionally with .
Steps
Part (a): Determining the Minimum Mirror Height
To determine the minimum height of a flat wall mirror required to see one's full body, we use the law of reflection: the angle of incidence equals the angle of reflection (). Equivalently, rays entering the observer's eyes appear to originate from a symmetric virtual image located at an equal distance behind the mirror plane.
-
Establish a Coordinate System:
- Let the floor be at vertical height .
- The person stands at a horizontal distance in front of the mirror plane ().
- The person's feet are at .
- The person's eyes are at .
- The top of the person's head is at .
- The virtual image of the person is located at a distance behind the mirror plane.
-
Locate the Top Edge of the Mirror:
- A light ray traveling from the top of the head () reflects into the eyes ().
- Because the horizontal distance from the person to the mirror equals the horizontal distance from the mirror back to the person's eyes, the reflection point on the mirror lies exactly midway in height between the eyes and the top of the head:
- Substituting the values:
-
Locate the Bottom Edge of the Mirror:
- A light ray traveling from the feet () reflects into the eyes ().
- By the same midpoint principle:
-
Calculate Minimum Height :
- The required mirror height is the vertical span between these two points:
- Substituting :
Thus, the mirror must have a minimum vertical length of , positioned with its bottom edge above the floor.
Part (b): Dependence on Distance
Consider the geometry using similar triangles formed by the eye, the mirror, and the virtual image:
- The observer's eye is at a distance from the mirror, while the virtual image is located at a distance behind the mirror.
- The total horizontal distance from the eye to the virtual image is:
- Light rays traced back from the eye to the head and feet of the virtual image form a large triangle of base height at distance .
- The vertical portion of the mirror intercepting these sightlines forms a smaller, similar triangle with its vertex at the eye and base at distance .
- By the properties of similar triangles:
Because the distance cancels out completely in the ratio, the required mirror height and its vertical placement on the wall are strictly invariant with respect to the distance .
Common Pitfall: Many people intuitively assume that moving farther away reveals more of their body because their field of view feels wider. While it is true that your image subtends a smaller visual angle as you back away, the mirror itself also subtends a proportionally smaller visual angle at exactly the same rate. Hence, walking backward does not allow you to see any more or less of your body.
Typical errors
01 The student assumes a 1:1 ratio between the person's physical height and the required mirror height instead of using reflection ray geometry.
Sample Student Work
Reviewed by ACEpath TeacherStep-by-Step Review
Walk Through It with Your Teacher- Step 1
To see the full body from head to toe, the mirror must cover the entire height of the person.
CorrectBecause the angle of incidence equals the angle of reflection, a light ray from any body point reflects into your eyes at the exact midpoint in vertical height between that point and your eyes. Consequently, the mirror needs to span only half your total height: .
- Step 2
At distance D, the height needed is equal to the full body height h. Since h is constant, remains strictly invariant as D changes.
Correct, which is independent of .
Your final qualitative conclusion that is invariant is correct, but the mathematical justification relies on the incorrect formula . A complete proof requires showing that the sightlines to the virtual image at distance form similar triangles with the mirror at distance , yielding , where cancels out.
WHAT YOU DID WELL
Compliments from Your TeacherYou correctly recognized that the required mirror height does not depend on the observer's distance from the wall.
THE ERROR
Where Your ACEpath Teacher Spotted the Mistakenone
WHY IT HAPPENED
ACEpath Teacher's DiagnosisYou treated mirror viewing as requiring a 1:1 window matching your full physical height, overlooking that reflection redirects rays to your eyes from the midpoints between your eye level and your extremities.
REASONING PATH
Your ACEpath teacher’s suggested approach- Midpoint Reflection Property
For a planar vertical mirror, a ray leaving height and entering an eye at height strikes the mirror at height .
Find the top and bottom reflection points separately using the midpoint formula, then subtract them to get the required span.
- Similar Triangles with Virtual Image
The virtual image has height and sits at distance behind the mirror, while your eye is distance in front of it (total baseline ).
Set up the ratio to demonstrate why distance cancels out.
CORRECTED PATH
ACEpath Teacher's DemonstrationFind the mirror's top edge: .
Find the mirror's bottom edge: .
Subtract the two heights to find : .
Set up similar triangles between the eye, mirror, and virtual image: , proving invariance with respect to .
(a) ; (b) remains strictly invariant because the similar triangle ratio is independent of .
02 The student bases the required mirror height solely on the eye height rather than half of the total body height.
Sample Student Work
Reviewed by ACEpath TeacherStep-by-Step Review
Walk Through It with Your Teacher- Step 1
Top of mirror is at eye level and bottom is halfway to floor at .
Correctand
You correctly found that the bottom of the mirror must lie halfway between your eyes and your feet. However, a light ray coming from the top of your head () into your eyes () reflects midway between them at , not at eye level.
- Step 2Correct
Because the top edge was placed at instead of , your calculated mirror height evaluated to instead of half the total height, .
- Step 3
The expression does not contain , so remains strictly invariant as changes.
WHAT YOU DID WELL
Compliments from Your TeacherYou correctly located the bottom edge of the mirror at half the eye height above the floor.
You correctly deduced that the minimum mirror height is independent of the viewing distance .
THE ERROR
Where Your ACEpath Teacher Spotted the MistakeYou set the top of the mirror at eye level () instead of finding the midpoint between the top of the head and the eyes ().
WHY IT HAPPENED
ACEpath Teacher's DiagnosisYou assumed that light from the top of the head enters the eyes along a horizontal line, forgetting that light reflecting from the crown of the head travels downward to the eyes, so the mirror's top edge must be halfway between eye level and the top of the head.
REASONING PATH
Your ACEpath teacher’s suggested approach- Law of Reflection Midpoint Rule
For a vertical planar mirror at distance , a ray from point reflecting into an eye at strikes the mirror at height .
Find the reflection point for the top of the head: .
- Total Mirror Span
The minimum height is .
Always verify that the resulting mirror height equals half of the total body height, regardless of eye position.
CORRECTED PATH
ACEpath Teacher's DemonstrationFind the mirror's top edge height: .
Find the mirror's bottom edge height: .
Subtract the two heights to find the minimum mirror span: .
(a) (with top at and bottom at above the floor); (b) remains strictly invariant with distance .
03 The student believes the field of view expands with distance and incorrectly concludes that the required mirror height decreases as distance increases.
Sample Student Work
Reviewed by ACEpath TeacherStep-by-Step Review
Walk Through It with Your Teacher- Step 1
Ray from top of head reflects at halfway point above eyes: . Ray from feet reflects at halfway point below eyes: .
- Step 2
The angular size of the mirror viewed by the student is theta = H / D. As D increases, the viewing angle widens the visible field of view on the wall. is inversely proportional to D, so decreases as D increases.
CorrectBy similar triangles formed by the eye, mirror, and virtual image at distance : , which is strictly invariant with respect to .
While backing away widens your view of the background room wall, your own virtual image is located at distance , twice the distance from your eyes to the mirror plane (). In the triangle connecting your eyes to your virtual image, the mirror always intercepts the exact midpoint (), so distance cancels out completely.
WHAT YOU DID WELL
Compliments from Your TeacherYou correctly used the law of reflection to find that light rays from the top of the head and feet strike the mirror halfway vertically toward eye level.
You calculated the correct numerical mirror height of for part (a).
THE ERROR
Where Your ACEpath Teacher Spotted the MistakeNo slip occurred; the derivation in part (b) was based on a conceptual misconception regarding angular field of view versus self-reflection geometry.
WHY IT HAPPENED
ACEpath Teacher's DiagnosisYou treated the mirror as an aperture viewing a fixed object rather than recognizing that your virtual image recedes at distance . Because both the mirror and the virtual image subtend visual angles that scale inversely with at the exact same rate, the ratio remains constant.
REASONING PATH
Your ACEpath teacher’s suggested approach- Virtual Image Position in a Plane Mirror
In a plane mirror, the virtual image is located at the same perpendicular distance behind the mirror plane as the real object is in front: .
Always draw or write the total distance from the observer's eyes to the virtual image as .
- Similar Triangles for Plane Mirror Geometry
The line of sight from the observer's eye to any point on the virtual image forms a pair of similar triangles: one triangle bounded by the mirror of height at distance , and the other bounded by the image of height at distance .
Set up the ratio , showing that completely cancels.
CORRECTED PATH
ACEpath Teacher's DemonstrationSet up similar triangles using the observer's eye at the origin, the mirror of height at distance , and the virtual image of full body height at distance .
Write the geometric similarity relation: .
Simplify the fraction: .
Observe that cancels out entirely, proving that the required mirror height remains strictly invariant regardless of the distance from the mirror.
, and remains strictly invariant as distance changes.
Lock it in
What fraction of a person's height must a flat vertical wall mirror have for them to see their full reflection?
Exactly of the person's height (), regardless of distance.
Similar question
A dancer of height stands in front of a flat wall mirror. Their eyes are above the floor. Determine the minimum vertical mirror height and the required height of the mirror's bottom edge above the floor to see head-to-toe.
Answer
; bottom edge at . Key steps: . The bottom edge must intercept the ray from the feet to the eyes, so .
An observer of height wears a tall hat of height , so their total height is . If their eyes remain at height , by how much does the minimum required mirror height increase so they can see both the top of the hat and their feet?
Answer
. Key steps: The total height is now . The new minimum mirror height is . Subtracting the original height gives .
A student stands at distance in front of a vertical mirror of height . Behind the student, at an additional distance from the mirror (distance from the mirror), is a vertical wall. What vertical span of the wall behind them can the student see in the mirror?
Answer
. Key steps: The student's eye is at distance from the mirror. The image of the rear wall is at distance behind the mirror, which is distance from the eye. By similar triangles, . Therefore, .