Resources

A tiny bead of mass m=5.00 gm = 5.00\text{ g} falls vertically through a viscous silicone oil column from rest. The downward motion is opposed by a velocity-dependent drag force Fd=−bvF_d = -bv, where b=0.125 kg/sb = 0.125\text{ kg/s}. Take downward as positive and g=9.80 m/s2g = 9.80\text{ m/s}^2. As time t→∞t \to \infty, the non-equilibrium falling state asymptotically approaches dynamic terminal equilibrium. Calculate the asymptotic terminal velocity vtermv_{\text{term}}, and find the instantaneous acceleration a(t)a(t) of the bead at the instant its velocity reaches 80.0%80.0\% of vtermv_{\text{term}}.

Answer and steps

Final answer

vterm=0.392 m/sv_{\text{term}} = 0.392\text{ m/s}, a=1.96 m/s2a = 1.96\text{ m/s}^2

Steps

01

Convert units to standard SI units

Ensure all physical quantities are expressed in standard SI units:

  • Mass: m=5.00 g=5.00×10−3 kgm = 5.00\text{ g} = 5.00 \times 10^{-3}\text{ kg}
  • Drag constant: b=0.125 kg/sb = 0.125\text{ kg/s}
  • Acceleration due to gravity: g=9.80 m/s2g = 9.80\text{ m/s}^2

02

Formulate Newton's second law

Choosing the downward direction as positive, two forces act on the falling bead along the vertical axis:

  1. The downward gravitational force: Fg=mgF_g = mg
  2. The upward viscous drag force opposing downward motion: Fd=bvF_d = bv

Applying Newton's second law, ΣF=ma\Sigma F = ma: mg−bv=mamg - bv = ma

Solving for acceleration aa: a=g−bmva = g - \frac{b}{m}v


03

Determine the asymptotic terminal velocity vtermv_{\text{term}}

As t→∞t \to \infty, the bead reaches dynamic terminal equilibrium where the upward drag force completely balances the downward gravitational force, resulting in zero net force and zero acceleration (a=0a = 0): mg−bvterm=0mg - bv_{\text{term}} = 0

vterm=mgbv_{\text{term}} = \frac{mg}{b}

Substitute the given values: vterm=(5.00×10−3 kg)(9.80 m/s2)0.125 kg/s=0.0490 N0.125 kg/s=0.392 m/sv_{\text{term}} = \frac{(5.00 \times 10^{-3}\text{ kg})(9.80\text{ m/s}^2)}{0.125\text{ kg/s}} = \frac{0.0490\text{ N}}{0.125\text{ kg/s}} = 0.392\text{ m/s}


04

Calculate the instantaneous acceleration at v=0.800 vtermv = 0.800\,v_{\text{term}}

When the downward speed is 80.0%80.0\% of its terminal speed: v=0.800 vtermv = 0.800\,v_{\text{term}}

Substitute this expression directly into the equation for acceleration: a=g−bm(0.800 vterm)a = g - \frac{b}{m}(0.800\,v_{\text{term}})

Since vterm=mgbv_{\text{term}} = \frac{mg}{b}, we have bmvterm=g\frac{b}{m}v_{\text{term}} = g: a=g−0.800 g=0.200 ga = g - 0.800\,g = 0.200\,g

Substitute the numerical value of gg: a=0.200×9.80 m/s2=1.96 m/s2a = 0.200 \times 9.80\text{ m/s}^2 = 1.96\text{ m/s}^2

Common Pitfall: Remember that drag depends directly on velocity; acceleration is not constant during the fall, so kinematic equations for constant acceleration (Δx=v0t+12at2\Delta x = v_0 t + \frac{1}{2}at^2) cannot be used.

Typical errors

OverviewACEpath Teacher's Diagnosis

01 The student forgets to convert the mass from grams to kilograms, resulting in a terminal velocity and drag force calculated with m = 5.00 kg.

Sample Student Work

Reviewed by ACEpath Teacher
Step-by-Step Review
Walk Through It with Your Teacher
Partially correct
  1. Step 1

    Fnet=mg−bvterm=0  ⟹  vterm=mgb=5.00×9.800.125=392 m/sF_{\text{net}} = mg - bv_{\text{term}} = 0 \implies v_{\text{term}} = \frac{mg}{b} = \frac{5.00 \times 9.80}{0.125} = 392\text{ m/s}

    Correct

    vterm=mgb=(5.00×10−3 kg)(9.80 m/s2)0.125 kg/s=0.392 m/sv_{\text{term}} = \frac{mg}{b} = \frac{(5.00 \times 10^{-3}\text{ kg})(9.80\text{ m/s}^2)}{0.125\text{ kg/s}} = 0.392\text{ m/s}

    Your algebraic setup for terminal velocity is completely sound. However, you substituted m=5.00m = 5.00 directly rather than converting grams to standard SI units (5.00 g=5.00×10−3 kg5.00\text{ g} = 5.00 \times 10^{-3}\text{ kg}), which made your terminal velocity 1,000 times too large.

  2. Step 2

    v=0.800×392=313.6 m/sv = 0.800 \times 392 = 313.6\text{ m/s}

    Correct

    v=0.800×0.392 m/s=0.3136 m/sv = 0.800 \times 0.392\text{ m/s} = 0.3136\text{ m/s}

    You correctly took 80.0%80.0\% of your terminal velocity, but the numerical value was affected by the uncorrected mass conversion from Step 1.

  3. Step 3

    ma=mg−bv  ⟹  a=g−bvm=9.80−0.125×313.65.00=9.80−7.84=1.96 m/s2ma = mg - bv \implies a = g - \frac{bv}{m} = 9.80 - \frac{0.125 \times 313.6}{5.00} = 9.80 - 7.84 = 1.96\text{ m/s}^2

WHAT YOU DID WELL
Compliments from Your Teacher

You correctly balanced gravity and drag to formulate the condition for terminal velocity.

You properly solved for the acceleration using Newton's second law.

THE ERROR
Where Your ACEpath Teacher Spotted the Mistake
Unit conversion omission (grams to kilograms)

You substituted the bead's mass as 5.00 kg5.00\text{ kg} instead of converting 5.00 g5.00\text{ g} to 5.00×10−3 kg5.00 \times 10^{-3}\text{ kg}.

WHY IT HAPPENED
ACEpath Teacher's Diagnosis

You skipped the initial unit-verification phase before substituting numerical values into equations involving SI constants (gg and bb).

REASONING PATH
Your ACEpath teacher’s suggested approach
SI Base Unit Check
  • Newtonian force and motion equations requiring constants in kg/s\text{kg/s} or m/s2\text{m/s}^2 require mass to be in kilograms (kg\text{kg}).

  • Always write out given values with explicit conversion factors (for example, 5.00 g=0.00500 kg5.00\text{ g} = 0.00500\text{ kg}) before plugging them into algebraic formulas.

Symbolic Simplification Before Number Crunching
  • When v=f⋅vtermv = f \cdot v_{\text{term}}, substituting vterm=mgbv_{\text{term}} = \frac{mg}{b} into a=g−bmva = g - \frac{b}{m}v gives a=g(1−f)a = g(1 - f).

  • Simplify expressions symbolically first to save calculation time and avoid carrying numerical unit errors.

CORRECTED PATH
ACEpath Teacher's Demonstration
  1. Convert mass: m=5.00 g=5.00×10−3 kgm = 5.00\text{ g} = 5.00 \times 10^{-3}\text{ kg}.

  2. Compute terminal velocity: vterm=mgb=(5.00×10−3 kg)(9.80 m/s2)0.125 kg/s=0.392 m/sv_{\text{term}} = \frac{mg}{b} = \frac{(5.00 \times 10^{-3}\text{ kg})(9.80\text{ m/s}^2)}{0.125\text{ kg/s}} = 0.392\text{ m/s}.

  3. Compute acceleration at 80.0%80.0\% of vtermv_{\text{term}}: a=g−bm(0.800vterm)=g(1−0.800)=0.200×9.80 m/s2=1.96 m/s2a = g - \frac{b}{m}(0.800 v_{\text{term}}) = g(1 - 0.800) = 0.200 \times 9.80\text{ m/s}^2 = 1.96\text{ m/s}^2.

Final answer

vterm=0.392 m/sv_{\text{term}} = 0.392\text{ m/s}, a=1.96 m/s2a = 1.96\text{ m/s}^2

NEXT STEPS
Final Takeaways from Your Teacher
  • Form the habit of boxing or underlining units in the problem statement as soon as you read them.

  • Check that all mechanical quantities are in kilograms, meters, and seconds prior to numerical substitution.

  • Practice working purely with variables until the final step to minimize arithmetic and conversion slips.

OverviewACEpath Teacher's Diagnosis

02 The student misinterprets 80.0% of terminal velocity as having 80.0% of the initial acceleration, concluding that the acceleration is 0.800*g rather than 0.200*g.

Sample Student Work

Reviewed by ACEpath Teacher
Step-by-Step Review
Walk Through It with Your Teacher
Partially correct
  1. Step 1

    Fnet=mg−b⋅vterm=0  ⟹  m=0.00500 kg  ⟹  vterm=0.00500×9.800.125=0.392 m/sF_{\text{net}} = mg - b \cdot v_{\text{term}} = 0 \implies m = 0.00500\text{ kg} \implies v_{\text{term}} = \frac{0.00500 \times 9.80}{0.125} = 0.392\text{ m/s}

  2. Step 2

    a=0.800×g  ⟹  a=0.800×9.80=7.84 m/s2a = 0.800 \times g \implies a = 0.800 \times 9.80 = 7.84\text{ m/s}^2

    Correct

    a=g−bmv=g(1−vvterm)=g(1−0.800)=0.200×9.80 m/s2=1.96 m/s2a = g - \frac{b}{m}v = g\left(1 - \frac{v}{v_{\text{term}}}\right) = g(1 - 0.800) = 0.200 \times 9.80\text{ m/s}^2 = 1.96\text{ m/s}^2

    As speed increases toward terminal velocity, drag grows and acceleration decreases toward zero. At v=0.800 vtermv = 0.800\,v_{\text{term}}, drag opposes 80.0%80.0\% of gravity, leaving only 20.0%20.0\% of gg as the net downward acceleration.

WHAT YOU DID WELL
Compliments from Your Teacher

You correctly identified that net force is zero when the falling bead reaches terminal velocity.

You converted the mass from grams to kilograms accurately before evaluating the formula.

THE ERROR
Where Your ACEpath Teacher Spotted the Mistake
Inverse scaling confusion in resistive acceleration

none

WHY IT HAPPENED
ACEpath Teacher's Diagnosis

You assumed acceleration scales proportionally with velocity (a∝va \propto v) rather than recognizing that upward drag reduces the net downward acceleration according to a=g(1−v/vterm)a = g(1 - v/v_{\text{term}}).

REASONING PATH
Your ACEpath teacher’s suggested approach
Boundary Value Sanity Check
  • At release (v=0v = 0), a=ga = g; at terminal velocity (v=vtermv = v_{\text{term}}), a=0a = 0. Acceleration decreases as speed increases.

  • Always check if your calculated acceleration decreases as velocity increases toward terminal velocity.

Newton's Second Law with Linear Drag
  • ΣF=mg−bv=ma  ⟹  a=g(1−vvterm)\Sigma F = mg - bv = ma \implies a = g\left(1 - \frac{v}{v_{\text{term}}}\right) because vterm=mgbv_{\text{term}} = \frac{mg}{b}.

  • Express instantaneous acceleration as a fraction of gg using (1−v/vterm)(1 - v/v_{\text{term}}), not directly as (v/vterm)g(v/v_{\text{term}})g.

CORRECTED PATH
ACEpath Teacher's Demonstration
  1. Write Newton's second law: mg−bv=mamg - bv = ma.

  2. Divide through by mass: a=g−bmva = g - \frac{b}{m}v.

  3. Substitute v=0.800 vtermv = 0.800\,v_{\text{term}} and bm=gvterm\frac{b}{m} = \frac{g}{v_{\text{term}}}: a=g−g(0.800)=0.200 ga = g - g(0.800) = 0.200\,g.

  4. Compute the numerical value: a=0.200×9.80 m/s2=1.96 m/s2a = 0.200 \times 9.80\text{ m/s}^2 = 1.96\text{ m/s}^2.

Final answer

vterm=0.392 m/sv_{\text{term}} = 0.392\text{ m/s}, a=1.96 m/s2a = 1.96\text{ m/s}^2

NEXT STEPS
Final Takeaways from Your Teacher
  • Practice deriving a(v)=g(1−v/vterm)a(v) = g(1 - v/v_{\text{term}}) directly from Newton's second law for linear drag.

  • Perform boundary checks at v=0v=0 and v=vtermv=v_{\text{term}} to confirm whether acceleration should increase or decrease.

OverviewACEpath Teacher's Diagnosis

03 The student incorrectly adds the drag force to gravity in Newton's second law instead of opposing the downward motion, calculating a = g + (b/m)v.

Sample Student Work

Reviewed by ACEpath Teacher
Step-by-Step Review
Walk Through It with Your Teacher
Partially correct
  1. Step 1

    mg=bvterm  ⟹  m=0.00500 kg  ⟹  vterm=0.00500×9.800.125=0.392 m/smg = b v_{\text{term}} \implies m = 0.00500\text{ kg} \implies v_{\text{term}} = \frac{0.00500 \times 9.80}{0.125} = 0.392\text{ m/s}

  2. Step 2

    ma=mg+bv  ⟹  a=g+(bm)vma = mg + bv \implies a = g + \left(\frac{b}{m}\right)v

    Correct

    ΣF=ma  ⟹  mg−bv=ma  ⟹  a=g−(bm)v\Sigma F = ma \implies mg - bv = ma \implies a = g - \left(\frac{b}{m}\right)v

    Because downward is defined as positive and the bead falls downward, the resistive viscous drag force acts upward, opposing the motion. Therefore, the net force equation must be mg−bv=mamg - bv = ma.

  3. Step 3

    v=0.800×vterm=0.3136 m/sv = 0.800 \times v_{\text{term}} = 0.3136\text{ m/s}

  4. Step 4

    a=9.80+(0.1250.00500)×0.3136  ⟹  a=9.80+7.84=17.64 m/s2a = 9.80 + \left(\frac{0.125}{0.00500}\right) \times 0.3136 \implies a = 9.80 + 7.84 = 17.64\text{ m/s}^2

    Correct

    a=9.80−(0.1250.00500)×0.3136=9.80−7.84=1.96 m/s2a = 9.80 - \left(\frac{0.125}{0.00500}\right) \times 0.3136 = 9.80 - 7.84 = 1.96\text{ m/s}^2

    Your arithmetic was accurate based on your previous equation, but the result was distorted by the plus sign in Step 2.

WHAT YOU DID WELL
Compliments from Your Teacher

You correctly converted the bead's mass from grams to standard kilograms.

You set up the terminal equilibrium condition correctly to find vterm=0.392 m/sv_{\text{term}} = 0.392\text{ m/s}.

You calculated 80.0%80.0\% of the terminal velocity accurately.

THE ERROR
Where Your ACEpath Teacher Spotted the Mistake
Sign error in drag force

You wrote +bv+bv instead of −bv-bv when applying Newton's second law along the downward direction.

WHY IT HAPPENED
ACEpath Teacher's Diagnosis

Viscous drag always opposes the direction of velocity. When downward is chosen as positive and the object falls downward, the drag force points in the negative direction, so it must reduce the gravitational acceleration rather than increase it.

REASONING PATH
Your ACEpath teacher’s suggested approach
Physical Reasonableness Check
  • An object falling from rest under drag starts with a=ga = g and slows its rate of acceleration until a=0a = 0 at terminal velocity.

  • Always verify that 0≤a(t)≤g0 \le a(t) \le g; if a>ga > g, a resistive force was accidentally added instead of subtracted.

Direction of Drag
  • F⃗d=−bv⃗\vec{F}_d = -b\vec{v} means the vector drag points strictly opposite to the velocity vector.

  • Draw a free-body diagram: downward weight +mg+mg, upward drag −bv-bv.

CORRECTED PATH
ACEpath Teacher's Demonstration
  1. Write Newton's second law with drag opposing downward motion: mg−bv=mamg - bv = ma.

  2. Isolate the instantaneous acceleration: a=g−(bm)va = g - \left(\frac{b}{m}\right)v.

  3. Substitute v=0.3136 m/sv = 0.3136\text{ m/s} along with g=9.80 m/s2g = 9.80\text{ m/s}^2, b=0.125 kg/sb = 0.125\text{ kg/s}, and m=0.00500 kgm = 0.00500\text{ kg} to get a=9.80−7.84a = 9.80 - 7.84.

Final answer

a=1.96 m/s2a = 1.96\text{ m/s}^2

NEXT STEPS
Final Takeaways from Your Teacher
  • Sketch a quick free-body diagram showing gravity pointing downward and drag pointing upward before writing ΣF=ma\Sigma F = ma.

  • Use the shortcut a=g(1−v/vterm)a = g(1 - v/v_{\text{term}}) when velocity is given as a fraction of terminal velocity to bypass intermediate arithmetic and prevent sign errors.

Lock it in

Similar question

01

A small ball bearing of mass m=2.50 gm = 2.50\text{ g} falls through glycerin with linear drag constant b=0.050 kg/sb = 0.050\text{ kg/s}. Taking g=9.80 m/s2g = 9.80\text{ m/s}^2, calculate its terminal velocity vtermv_{\text{term}}.

Answer

vterm=0.490 m/sv_{\text{term}} = 0.490\text{ m/s}. Convert m=2.50×10−3 kgm = 2.50 \times 10^{-3}\text{ kg}. At terminal velocity, mg=bvterm  ⟹  vterm=(2.50×10−3 kg)(9.80 m/s2)0.050 kg/s=0.490 m/smg = bv_{\text{term}} \implies v_{\text{term}} = \frac{(2.50 \times 10^{-3}\text{ kg})(9.80\text{ m/s}^2)}{0.050\text{ kg/s}} = 0.490\text{ m/s}.

02

A dust particle of mass m=0.400 mgm = 0.400\text{ mg} falls vertically in air with linear drag coefficient b=8.00×10−6 kg/sb = 8.00 \times 10^{-6}\text{ kg/s}. Taking g=9.80 m/s2g = 9.80\text{ m/s}^2, find its instantaneous acceleration when its downward speed is 25.0%25.0\% of its terminal velocity.

Answer

a=7.35 m/s2a = 7.35\text{ m/s}^2. Using a=g(1−vvterm)=g(1−0.250)=0.750×9.80 m/s2=7.35 m/s2a = g\left(1 - \frac{v}{v_{\text{term}}}\right) = g(1 - 0.250) = 0.750 \times 9.80\text{ m/s}^2 = 7.35\text{ m/s}^2 (mass conversion is not strictly needed for the acceleration fraction, but m=4.00×10−7 kgm = 4.00 \times 10^{-7}\text{ kg}).

03

A spherical pellet of mass m=8.00 gm = 8.00\text{ g} is released from rest in a viscous fluid where Fd=−bvF_d = -bv. Its terminal velocity is measured to be vterm=1.20 m/sv_{\text{term}} = 1.20\text{ m/s}. Find the drag constant bb and the instantaneous net force acting on the pellet when its speed is 0.900 m/s0.900\text{ m/s}. Use g=9.80 m/s2g = 9.80\text{ m/s}^2.

Answer

b=0.0653 kg/sb = 0.0653\text{ kg/s}, Fnet=0.0196 NF_{\text{net}} = 0.0196\text{ N}. First convert m=8.00×10−3 kgm = 8.00 \times 10^{-3}\text{ kg}. Drag constant b=mgvterm=(8.00×10−3)(9.80)1.20≈0.0653 kg/sb = \frac{mg}{v_{\text{term}}} = \frac{(8.00 \times 10^{-3})(9.80)}{1.20} \approx 0.0653\text{ kg/s}. At v=0.900 m/s=0.750vtermv = 0.900\text{ m/s} = 0.750 v_{\text{term}}, Fnet=mg−bv=mg(1−0.750)=0.250×(8.00×10−3)(9.80)=0.0196 NF_{\text{net}} = mg - bv = mg(1 - 0.750) = 0.250 \times (8.00 \times 10^{-3})(9.80) = 0.0196\text{ N}.

Loading workspace…