Resources

A passenger of mass m=68.0 kgm = 68.0\text{ kg} sits in a passenger car traveling due east at a constant speed of v0=24.0 m/sv_0 = 24.0\text{ m/s}. The car enters a horizontal curve of radius R=80.0 mR = 80.0\text{ m} turning toward the north (counter-clockwise when viewed from above). Take the +x+x-axis to point east and the +y+y-axis to point north. (a) In an inertial frame attached to the ground, explain why the passenger perceives a sensation of being 'thrown outward' (toward the south/right) using Newton's first law, and contrast this with the real physical force acting on the passenger. (b) Identify the direction of the net physical force acting on the passenger during the turn and calculate its magnitude ∥ΣF⃗∥\|\Sigma \vec{F}\|. (c) If the passenger sits on a horizontal vinyl seat with static friction coefficient μs=0.650\mu_s = 0.650, state whether friction alone can keep the passenger moving along the circular path without sliding, providing the numerical margin.

Answer and steps

Final answer

(a) By Newton's first law, the passenger's inertia tends to preserve their instantaneous straight-line tangential velocity due east (+x+x-direction); the perceived outward 'centrifugal' tendency is a fictitious effect of being inside a non-inertial rotating frame, whereas the only real physical force is the inward static friction directed toward the center of curvature (+y+y-direction). (b) The net force is directed radially inward toward the center of curvature (north, +y+y-direction) with magnitude ∥ΣF⃗∥=490 N\|\Sigma \vec{F}\| = 490\text{ N}. (c) Yes; the required centripetal force is 490 N490\text{ N} while the maximum available static friction is fs,max⁡=μsmg=(0.650)(68.0 kg)(9.80 m/s2)=433 Nf_{s,\max} = \mu_s mg = (0.650)(68.0\text{ kg})(9.80\text{ m/s}^2) = 433\text{ N}... Wait, since fs,max⁡=433.16 N<490 Nf_{s,\max} = 433.16\text{ N} < 490\text{ N}, friction alone cannot keep the passenger on the circular path; the passenger will slip outward by a deficit of 56.8 N56.8\text{ N} unless restrained.

Steps

Part (a): Inertia and the "Outward" Sensation

According to Newton's First Law of Motion (the law of inertia), an object maintains its state of rest or constant velocity in a straight line unless acted upon by a net external force:

  1. Natural Inertial Tendency: Just as the car enters the turn heading east, the passenger's inertia naturally tends to keep them moving in a straight line in the +x+x-direction (due east) at constant speed v0=24.0 m/sv_0 = 24.0\text{ m/s}.
  2. Perceived Outward Push vs. Real Physical Force: As the car turns left (toward the north, +y+y), the car's seat and door pivot inward beneath and around the passenger.

    • From the non-inertial (accelerating) reference frame of the turning car, the passenger feels an apparent "centrifugal force" throwing them outward to the right (south, −y-y). This is a fictitious force arising entirely from observing motion from an accelerated frame.
    • In a true inertial frame (fixed to the ground), there is no outward physical force. The only real horizontal force acting on the passenger is the inward contact force (static friction from the seat and/or normal force from the seatbelt/door) directed toward the center of curvature (north, +y+y), forcing the passenger to deviate from their straight-line path.

Part (b): Magnitude and Direction of the Net Force

For an object following a circular path of radius RR at constant speed vv, it undergoes centripetal acceleration directed toward the center of curvature: ac=v02Ra_c = \frac{v_0^2}{R}

  1. Direction of Net Force: Because the car is initially heading east (+x+x) and turning counter-clockwise toward the north (+y+y), the center of the turning circle lies directly to the left, which is due north (+y+y-direction). By Newton's second law, ΣF⃗=ma⃗\Sigma \vec{F} = m\vec{a}, so the net physical force must point radially inward toward the center of the turn (due north / +y+y-direction).
  2. Magnitude of Net Force: ∥ΣF⃗∥=mac=mv02R\|\Sigma \vec{F}\| = m a_c = m \frac{v_0^2}{R}

    Substitute the given values: ∥ΣF⃗∥=(68.0 kg)⋅(24.0 m/s)280.0 m=(68.0 kg)⋅576 m2/s280.0 m=68.0⋅7.20 N=489.6 N≈490 N\|\Sigma \vec{F}\| = (68.0\text{ kg}) \cdot \frac{(24.0\text{ m/s})^2}{80.0\text{ m}} = (68.0\text{ kg}) \cdot \frac{576\text{ m}^2/\text{s}^2}{80.0\text{ m}} = 68.0 \cdot 7.20\text{ N} = 489.6\text{ N} \approx 490\text{ N}


Part (c): Friction Analysis

To prevent sliding, static friction must supply the entire centripetal force required to maintain the circular path.

  1. Maximum Available Static Friction: On a level horizontal surface, the normal force is FN=mgF_N = mg. The maximum static friction force is: fs,max⁡=μsFN=μsmgf_{s,\max} = \mu_s F_N = \mu_s mg

    Taking g=9.80 m/s2g = 9.80\text{ m/s}^2: fs,max⁡=(0.650)⋅(68.0 kg)⋅(9.80 m/s2)=433.16 N≈433 Nf_{s,\max} = (0.650) \cdot (68.0\text{ kg}) \cdot (9.80\text{ m/s}^2) = 433.16\text{ N} \approx 433\text{ N}

  2. Comparison:

    • Required force: Frequired=489.6 N≈490 NF_{\text{required}} = 489.6\text{ N} \approx 490\text{ N}
    • Maximum static friction: fs,max⁡=433.2 N≈433 Nf_{s,\max} = 433.2\text{ N} \approx 433\text{ N}

Because fs,max⁡<∥ΣF⃗∥f_{s,\max} < \|\Sigma \vec{F}\|, friction alone cannot keep the passenger moving along the circular path without sliding. The passenger will slide outward toward the right door unless supported by an additional restraining force (such as a seatbelt or the car door) with a numerical deficit of: 489.6 N−433.2 N≈56.4 N (or ≈57 N deficit)489.6\text{ N} - 433.2\text{ N} \approx 56.4\text{ N} \text{ (or } \approx 57\text{ N}\text{ deficit)}

Typical errors

OverviewACEpath Teacher's Diagnosis

01 The student forgets to square the velocity when calculating the centripetal acceleration, yielding an underestimated required force and an incorrect conclusion that friction is sufficient.

Sample Student Work

Reviewed by ACEpath Teacher
Step-by-Step Review
Walk Through It with Your Teacher
Partially correct
  1. Step 1

    By Newton's first law, the passenger's body tends to keep moving straight ahead due to inertia. As the car turns north, the car turns into the passenger, making it feel like an outward push. The only real physical force is directed inward toward the center of the turn.

  2. Step 2

    Direction: inward toward the center of curvature (north, \text{Direction: inward toward the center of curvature (north, } +y  direction)\text{ direction)}

  3. Step 3

    F_{net\text{net}} = mvR\frac{mv}{R} = (68.0)(24.0)80.0\frac{(68.0)(24.0)}{80.0} = 20.4 N\text{ N}_

    Correct

    |\Sigma F⃗\vec{F}| = mv2R\frac{mv^2}{R} = (68.0 kg)(24.0 m/s)280.0 m\frac{(68.0\text{ kg})(24.0\text{ m/s})^2}{80.0\text{ m}} = 489.6 N\text{ N} ≈\approx 490 N\text{ N}

    You forgot to square the speed vv in the centripetal force formula. Centripetal acceleration is ac=v2Ra_c = \frac{v^2}{R}, so the net force is Fnet=mv2R=490 NF_{\text{net}} = \frac{mv^2}{R} = 490\text{ N}, not 20.4 N20.4\text{ N}.

  4. Step 4

    f_{s,\max} = μ\mu_s mg = 0.650 ×\times 68.0 ×\times 9.80 = 433.2 N\text{ N}

  5. Step 5

    Margin\text{Margin} = f_{s,\max} - F_{net\text{net}} = 433.2 N\text{ N} - 20.4 N\text{ N} = +412.8 N\text{ N}   ⟹  \implies Since the margin is positive, friction alone is sufficient to keep the passenger moving along the curve.\text{Since the margin is positive, friction alone is sufficient to keep the passenger moving along the curve.}

    Correct

    f_{s,\max} - F_{required\text{required}} = 433.2 N\text{ N} - 489.6 N\text{ N} = -56.4 N\text{ N}   ⟹  \implies Friction alone is not sufficient; the passenger slides outward unless restrained by a deficit of \text{Friction alone is not sufficient; the passenger slides outward unless restrained by a deficit of } 56.4 N\text{ N}.

    Your comparison logic was sound, but your conclusion was thrown off by the incorrect net force from Step 3. Because the required force (489.6 N489.6\text{ N}) exceeds maximum static friction (433.2 N433.2\text{ N}), friction alone is insufficient.

WHAT YOU DID WELL
Compliments from Your Teacher

You clearly applied Newton's first law to explain why the passenger feels an outward sensation.

You correctly distinguished between the fictitious outward feeling and the real inward centripetal force.

You correctly calculated the maximum available static friction using fs,max⁡=μsmgf_{s,\max} = \mu_s mg.

THE ERROR
Where Your ACEpath Teacher Spotted the Mistake
Missing Exponent in Centripetal Force Formula

You wrote F=mvRF = \frac{mv}{R} instead of F=mv2RF = \frac{mv^2}{R}, omitting the exponent on vv.

WHY IT HAPPENED
ACEpath Teacher's Diagnosis

You used an incomplete expression for centripetal acceleration (ac=v/Ra_c = v/R instead of ac=v2/Ra_c = v^2/R), likely confusing circular acceleration with angular velocity formulas (like ω=v/R\omega = v/R) or dimensional units.

REASONING PATH
Your ACEpath teacher’s suggested approach
Dimensional Check for Force
  • Force must have units of kg⋅m/s2=N\text{kg}\cdot\text{m}/\text{s}^2 = \text{N}. The term mvR\frac{mv}{R} has units kg⋅(m/s)m=kg/s\frac{\text{kg}\cdot(\text{m}/\text{s})}{\text{m}} = \text{kg}/\text{s}, which is not a unit of force.

  • Always verify that your acceleration formula has units of m/s2\text{m}/\text{s}^2, requiring v2/Rv^2/R or ω2R\omega^2 R.

Centripetal Force Formula
  • Centripetal acceleration is ac=v2R=ω2Ra_c = \frac{v^2}{R} = \omega^2 R, making Fc=mv2RF_c = m\frac{v^2}{R}.

  • Write out ac=v2Ra_c = \frac{v^2}{R} explicitly before substituting numbers to make sure the square is not skipped.

CORRECTED PATH
ACEpath Teacher's Demonstration
  1. Recalculate the net centripetal force using the correct formula: ∥ΣF⃗∥=mv02R=(68.0 kg)(24.0 m/s)280.0 m=68.0×7.20=489.6 N≈490 N\|\Sigma \vec{F}\| = m\frac{v_0^2}{R} = (68.0\text{ kg})\frac{(24.0\text{ m/s})^2}{80.0\text{ m}} = 68.0 \times 7.20 = 489.6\text{ N} \approx 490\text{ N}.

  2. Compare the required centripetal force to the maximum available static friction: fs,max⁡=433.2 N<489.6 Nf_{s,\max} = 433.2\text{ N} < 489.6\text{ N}.

  3. Compute the deficit margin: 433.2 N−489.6 N=−56.4 N433.2\text{ N} - 489.6\text{ N} = -56.4\text{ N}.

Final answer

Friction alone is insufficient to prevent sliding; the passenger will slip outward unless an additional force of at least 56.4 N56.4\text{ N} (or ≈57 N\approx 57\text{ N}) is provided by a seatbelt or the car door.

NEXT STEPS
Final Takeaways from Your Teacher
  • Check units whenever computing forces: confirm that acceleration terms contain speed squared over distance (v2/Rv^2/R).

  • Practice rewriting centripetal force problems using both Fc=mv2RF_c = m\frac{v^2}{R} and Fc=mω2RF_c = m\omega^2 R to solidify the formula.

  • Solve follow-up problems comparing available friction to required centripetal force at varying speeds.

OverviewACEpath Teacher's Diagnosis

02 The student believes an actual physical centrifugal force acts outward, incorrectly identifying the direction of the net real physical force as south.

Sample Student Work

Reviewed by ACEpath Teacher
Step-by-Step Review
Walk Through It with Your Teacher
Partially correct
  1. Step 1

    The passenger is pushed outward because a real centrifugal force acts on objects moving in a circle. ⟹ The real physical force acts toward the outside of the curve, pointing south.

    Correct

    By Newton's first law, the passenger's inertia tends to preserve their straight-line tangential velocity due east (+x+x-direction). In an inertial frame attached to the ground, there is no physical outward force; the sensation of being thrown outward is an apparent effect of being in an accelerating reference frame. The only real horizontal physical force acts inward toward the center of curvature (north, +y+y-direction).

    You treated 'centrifugal force' as an actual physical interaction. In an inertial frame, centrifugal force does not exist; the outward sensation is caused by your body's inertia wanting to continue moving in a straight line while the vehicle curves beneath you.

  2. Step 2

    Direction: outward away from the center of curvature (south, -y direction) ⟹ Fnet=mv2R=68.0×24.0280.0=489.6 NF_{\text{net}} = \frac{m v^2}{R} = \frac{68.0 \times 24.0^2}{80.0} = 489.6\text{ N}

    Correct

    F⃗net\vec{F}_{\text{net}} points radially inward toward the center of curvature (due north, +y+y-direction); ∥ΣF⃗∥=mv02R=(68.0 kg)(24.0 m/s)280.0 m=489.6 N≈490 N\|\Sigma \vec{F}\| = m \frac{v_0^2}{R} = (68.0\text{ kg})\frac{(24.0\text{ m/s})^2}{80.0\text{ m}} = 489.6\text{ N} \approx 490\text{ N}

    You calculated the numerical magnitude of the net force accurately as 489.6 N489.6\text{ N}. However, because the car turns toward the north, the centripetal acceleration and the net physical force must point inward toward the center of the turn (+y+y-direction, north), not outward (south).

  3. Step 3

    fs,max⁡=μsmg=0.650×68.0×9.80=433.2 Nf_{s,\max} = \mu_s mg = 0.650 \times 68.0 \times 9.80 = 433.2\text{ N} ⟹ Margin=fs,max⁡−Fnet=433.2 N−489.6 N=−56.4 N\text{Margin} = f_{s,\max} - F_{\text{net}} = 433.2\text{ N} - 489.6\text{ N} = -56.4\text{ N} ⟹ Since fs,max⁡<Fnetf_{s,\max} < F_{\text{net}} by 56.4 N56.4\text{ N}, friction alone is not sufficient to keep the passenger from sliding.

WHAT YOU DID WELL
Compliments from Your Teacher

You correctly used the formula for centripetal force magnitude Fc=mv2RF_c = \frac{mv^2}{R} and evaluated it to 489.6 N489.6\text{ N}.

You correctly calculated the maximum static friction force using fs,max⁡=μsmg=433.2 Nf_{s,\max} = \mu_s mg = 433.2\text{ N}.

You correctly concluded that friction alone cannot keep the passenger on the circular path because the required force exceeds the maximum available friction.

THE ERROR
Where Your ACEpath Teacher Spotted the Mistake
Misconception regarding centrifugal force and net force direction in circular motion

none

WHY IT HAPPENED
ACEpath Teacher's Diagnosis

You interpreted the perceived outward push experienced in a turning vehicle as an actual physical force (centrifugal force) acting in an inertial frame, which led you to assign an outward direction (south) to the real net physical force rather than an inward centripetal direction (north).

REASONING PATH
Your ACEpath teacher’s suggested approach
Inertia vs. Real Force
  • In an inertial reference frame, an object in uniform circular motion has an acceleration pointing strictly toward the center of the circular path: a⃗c=v2R(−r^)\vec{a}_c = \frac{v^2}{R} (-\hat{r}). By ΣF⃗=ma⃗\Sigma \vec{F} = m\vec{a}, the net physical force must also point toward the center.

  • Always identify the center of the circular arc. Draw the net real force vector pointing directly toward that center, and attribute any 'outward' feeling to the body's inertia trying to maintain a straight-line path.

CORRECTED PATH
ACEpath Teacher's Demonstration
  1. Recognize that as the car turns north from an eastward heading, the center of curvature lies due north (+y+y).

  2. Apply Newton's first law: the passenger's body tends to continue moving straight east (+x+x). As the car turns north, the seat/door must push the passenger north toward the center.

  3. State the direction of the net physical force as radially inward toward the center of curvature (north, +y+y-direction).

Final answer

(a) Sensation is due to inertia resisting deviation from the straight eastward path; the real force points inward (north). (b) Net physical force points due north (+y+y) with magnitude 489.6 N≈490 N489.6\text{ N} \approx 490\text{ N}. (c) Friction alone cannot keep the passenger on the path; deficit is 56.4 N56.4\text{ N}.

NEXT STEPS
Final Takeaways from Your Teacher
  • Review the distinction between inertial reference frames (where Newton's laws hold with only real physical forces) and non-inertial reference frames (where fictitious forces appear).

  • Practice drawing free-body diagrams for objects undergoing uniform circular motion, always ensuring that the resultant horizontal force points directly toward the center of curvature.

OverviewACEpath Teacher's Diagnosis

03 The student confuses the static friction coefficient with the required centripetal acceleration, calculating maximum friction as μ_s m v² / R instead of μ_s m g.

Sample Student Work

Reviewed by ACEpath Teacher
Step-by-Step Review
Walk Through It with Your Teacher
Partially correct
  1. Step 1

    According to Newton's first law, the passenger's inertia carries them in a straight line. ⟹ The sensation of being thrown outward is due to the car turning under them, not an outward force. ⟹ The real physical force points inward toward the center of the turn.

  2. Step 2

    Direction: inward toward the center of curvature (north, \text{Direction: inward toward the center of curvature (north, }+y direction)\text{ direction)}   ⟹  \implies F_{net\text{net}} = mv2R\frac{m v^2}{R} = 68.0×(24.0)280.0\frac{68.0 \times (24.0)^2}{80.0} = 489.6 N\text{ N}_

  3. Step 3

    f_{s,\max} = μ\mu_s mv2R\frac{m v^2}{R} = 0.650 ×\times 489.6 N\text{ N} = 318.2 N\text{ N}

    Correct

    f_{s,\max} = μ\mu_s F_N = μ\mus m g = 0.650 ×\times 68.0 kg\text{ kg} ×\times 9.80 m/s\text{ m/s}^2 = 433.2 N\text{ N}

    You multiplied the friction coefficient by the centripetal force mv2R\frac{mv^2}{R} instead of the vertical normal force FN=mgF_N = mg. Friction depends on how hard the surfaces press against each other vertically, not on the horizontal acceleration.

  4. Step 4

    Margin\text{Margin} = f_{s,\max} - F_{net\text{net}} = 318.2 N\text{ N} - 489.6 N\text{ N} = -171.4 N\text{ N}   ⟹  \implies Since the margin is \text{Since the margin is } -171.4 N, friction alone cannot keep the passenger moving along the circular path.\text{ N, friction alone cannot keep the passenger moving along the circular path.}

    Correct

    Margin\text{Margin} = f_{s,\max} - F_{net\text{net}} = 433.2 N\text{ N} - 489.6 N\text{ N} = -56.4 N\text{ N}   ⟹  \implies Friction alone cannot keep the passenger on the curve without sliding (deficit of \text{Friction alone cannot keep the passenger on the curve without sliding (deficit of } 56.4 N).\text{ N).}

    Your qualitative conclusion that friction alone is insufficient is correct, but your numerical deficit is inaccurate due to the calculation error in Step 3.

WHAT YOU DID WELL
Compliments from Your Teacher

You clearly applied Newton's first law to explain why an occupant feels an apparent outward push during a turn.

You correctly identified that the actual net horizontal force points radially inward toward the center of curvature.

You evaluated the required centripetal force formula mv2R\frac{mv^2}{R} with accurate numerical values.

THE ERROR
Where Your ACEpath Teacher Spotted the Mistake
Normal Force Confusion in Static Friction

none

WHY IT HAPPENED
ACEpath Teacher's Diagnosis

You substituted the horizontal net centripetal force mv2R\frac{mv^2}{R} into the friction equation fs,max⁡=μsFNf_{s,\max} = \mu_s F_N instead of using the vertical normal force FN=mgF_N = mg.

REASONING PATH
Your ACEpath teacher’s suggested approach
Identify Normal Force from Perpendicular Equilibrium
  • On a level, unbanked horizontal surface with no vertical acceleration, the normal force balances gravity: FN=mgF_N = mg.

  • Draw a vertical free-body diagram to find FNF_N before computing maximum static friction fs,max⁡=μsFNf_{s,\max} = \mu_s F_N.

Separate Force Capacity from Required Force
  • The maximum available static friction fs,max⁡=μsmgf_{s,\max} = \mu_s mg is an upper limit determined by the surface contact, while Freq=mv2RF_{\text{req}} = \frac{mv^2}{R} is the kinetic requirement to hold the turn.

  • Compute fs,max⁡f_{s,\max} using vertical contact forces and compare it against the horizontal centripetal requirement FreqF_{\text{req}}.

CORRECTED PATH
ACEpath Teacher's Demonstration
  1. Find the normal force acting on the passenger along the vertical axis: FN=mg=(68.0 kg)(9.80 m/s2)=666.4 NF_N = mg = (68.0\text{ kg})(9.80\text{ m/s}^2) = 666.4\text{ N}.

  2. Calculate the maximum available static friction: fs,max⁡=μsFN=0.650×666.4 N=433.16 Nf_{s,\max} = \mu_s F_N = 0.650 \times 666.4\text{ N} = 433.16\text{ N}.

  3. Compare available friction with the required centripetal force: Margin=fs,max⁡−Fnet=433.16 N−489.6 N=−56.44 N\text{Margin} = f_{s,\max} - F_{\text{net}} = 433.16\text{ N} - 489.6\text{ N} = -56.44\text{ N}.

Final answer

Friction alone cannot keep the passenger on the path; there is a deficit of 56.4 N56.4\text{ N} (or a margin of −56.4 N-56.4\text{ N}).

NEXT STEPS
Final Takeaways from Your Teacher
  • Always sketch two orthogonal force axes (vertical and horizontal) to keep the normal force separate from the centripetal force.

  • Practice calculating maximum static friction specifically on flat horizontal surfaces where FN=mgF_N = mg.

Lock it in

Similar question

01

A 1200 kg1200\text{ kg} car rounds a flat, horizontal curve of radius 50.0 m50.0\text{ m} at a constant speed of 15.0 m/s15.0\text{ m/s}. Calculate the magnitude of the net horizontal force needed to keep the car on the curve.

Answer

5400 N5400\text{ N}. Key steps: Fc=mv2R=(1200 kg)(15.0 m/s)250.0 m=1200×4.50=5400 NF_c = m\frac{v^2}{R} = (1200\text{ kg})\frac{(15.0\text{ m/s})^2}{50.0\text{ m}} = 1200 \times 4.50 = 5400\text{ N} directed radially inward.

02

An 80.0 kg80.0\text{ kg} cyclist negotiates an unbanked circular turn of radius 25.0 m25.0\text{ m} on a level road with static friction coefficient μs=0.400\mu_s = 0.400. Find the maximum speed at which the cyclist can turn without skidding (take g=9.80 m/s2g = 9.80\text{ m/s}^2).

Answer

9.90 m/s9.90\text{ m/s}. Key steps: Set fs,max⁡=Fc  ⟹  μsmg=mv2Rf_{s,\max} = F_c \implies \mu_s mg = m\frac{v^2}{R}, which simplifies to v=μsgR=(0.400)(9.80 m/s2)(25.0 m)=98.0≈9.90 m/sv = \sqrt{\mu_s g R} = \sqrt{(0.400)(9.80\text{ m/s}^2)(25.0\text{ m})} = \sqrt{98.0} \approx 9.90\text{ m/s}.

03

A box of mass m=5.0 kgm = 5.0\text{ kg} sits on a flat rotating turntable at a distance of r=0.80 mr = 0.80\text{ m} from the central axis. The coefficient of static friction is μs=0.30\mu_s = 0.30. If the turntable rotates at an angular speed of ω=2.0 rad/s\omega = 2.0\text{ rad/s}, determine whether the box will slip, and find the margin between the available friction and the required force (g=9.80 m/s2g = 9.80\text{ m/s}^2).

Answer

The box will not slip; friction exceeds the required force by a positive margin of 1.1 N1.1\text{ N}. Key steps: Freq=mω2r=(5.0)(2.0)2(0.80)=16.0 NF_{\text{req}} = m\omega^2 r = (5.0)(2.0)^2(0.80) = 16.0\text{ N}. Maximum static friction is fs,max⁡=μsmg=(0.30)(5.0)(9.80)=14.7 Nf_{s,\max} = \mu_s mg = (0.30)(5.0)(9.80) = 14.7\text{ N}... Wait: Freq=16.0 N>fs,max⁡=14.7 NF_{\text{req}} = 16.0\text{ N} > f_{s,\max} = 14.7\text{ N}, so the box will slip with a deficit of 1.3 N1.3\text{ N}.

Loading workspace…