Resources

In a photoelectric experiment utilizing a potassium emitter (work function Φ=2.29 eV\Phi = 2.29\text{ eV}), incident ultraviolet radiation causes electrons to be ejected. A retarding potential is applied with the collector held negative relative to the emitter, and the stopping potential is measured to be V0=1.15 VV_0 = 1.15\text{ V} (such that the required stopping work is Wstop=−eV0W_{\text{stop}} = -e V_0). Taking care of electrostatic work signs, calculate: (a) the maximum kinetic energy KmaxK_{\text{max}} of the emitted electrons in both eV\text{eV} and joules (J\text{J}), and (b) the wavelength λ\lambda of the incident light in nanometers (nm\text{nm}).

Answer and steps

Final answer

(a) Kmax=1.15 eV=1.84×10−19 JK_{\text{max}} = 1.15\text{ eV} = 1.84 \times 10^{-19}\text{ J}; (b) λ=361 nm\lambda = 361\text{ nm}

Steps

Part (a): Maximum Kinetic Energy (KmaxK_{\text{max}})

  1. Relate Stopping Potential to Kinetic Energy Using the Work-Energy Theorem: When electrons travel from the emitter to the negatively biased collector, the retarding electric force performs negative work on them. For the fastest electrons (those with maximum kinetic energy KmaxK_{\text{max}}), the stopping potential V0V_0 is the minimum voltage necessary to bring them to rest just before reaching the collector: ΔK=Welec\Delta K = W_{\text{elec}} 0−Kmax=qΔV=(−e)(Vcollector−Vemitter)0 - K_{\text{max}} = q \Delta V = (-e)(V_{\text{collector}} - V_{\text{emitter}})

    Because the collector is at a lower electric potential by V0V_0, ΔV=−V0\Delta V = -V_0: −Kmax=(−e)(−V0)=−eV0  ⟹  Kmax=eV0-K_{\text{max}} = (-e)(-V_0) = -e V_0 \implies K_{\text{max}} = e V_0

  2. Compute KmaxK_{\text{max}} in Electron-Volts (eV\text{eV}): Kmax=e(1.15 V)=1.15 eVK_{\text{max}} = e(1.15\text{ V}) = 1.15\text{ eV}
  3. Convert KmaxK_{\text{max}} to Joules (J\text{J}): Using the elementary charge conversion factor 1 eV=1.602×10−19 J1\text{ eV} = 1.602 \times 10^{-19}\text{ J}: Kmax=1.15⋅(1.602×10−19 J)≈1.84×10−19 JK_{\text{max}} = 1.15 \cdot (1.602 \times 10^{-19}\text{ J}) \approx 1.84 \times 10^{-19}\text{ J}

Common Pitfall: Watch the signs of charge and potential difference carefully. Both the electron charge q=−eq = -e and the potential drop ΔV=−V0\Delta V = -V_0 are negative, leading to a positive maximum kinetic energy Kmax=eV0K_{\text{max}} = e V_0.


Part (b): Incident Photon Wavelength (λ\lambda)

  1. Find Incident Photon Energy (EphotonE_{\text{photon}}): According to Einstein's photoelectric equation, the total energy of an incident photon equals the work function of the metal plus the maximum kinetic energy of the liberated electron: Ephoton=Φ+KmaxE_{\text{photon}} = \Phi + K_{\text{max}} Ephoton=2.29 eV+1.15 eV=3.44 eVE_{\text{photon}} = 2.29\text{ eV} + 1.15\text{ eV} = 3.44\text{ eV}
  2. Calculate the Wavelength (λ\lambda): The energy of a photon relates to its wavelength by Ephoton=hcλE_{\text{photon}} = \frac{hc}{\lambda}, which rearranges to: λ=hcEphoton\lambda = \frac{hc}{E_{\text{photon}}}

    Using Planck's constant h=6.626×10−34 J⋅sh = 6.626 \times 10^{-34}\text{ J}\cdot\text{s}, the speed of light c=3.00×108 m/sc = 3.00 \times 10^8\text{ m/s}, and Ephoton=3.44⋅(1.602×10−19 J)=5.51×10−19 JE_{\text{photon}} = 3.44 \cdot (1.602 \times 10^{-19}\text{ J}) = 5.51 \times 10^{-19}\text{ J}: λ=(6.626×10−34 J⋅s)(3.00×108 m/s)5.51×10−19 J≈3.61×10−7 m=361 nm\lambda = \frac{(6.626 \times 10^{-34}\text{ J}\cdot\text{s})(3.00 \times 10^8\text{ m/s})}{5.51 \times 10^{-19}\text{ J}} \approx 3.61 \times 10^{-7}\text{ m} = 361\text{ nm}

Typical errors

OverviewACEpath Teacher's Diagnosis

01 The student subtracts the stopping energy from the work function instead of adding them when setting up Einstein's photoelectric equation.

Sample Student Work

Reviewed by ACEpath Teacher
Step-by-Step Review
Walk Through It with Your Teacher
Partially correct
  1. Step 1

    Kmax=e⋅V0=1.15 eV  ⟹  Kmax=1.15⋅1.602×10−19 J=1.84×10−19 JK_{\text{max}} = e \cdot V_0 = 1.15\text{ eV} \implies K_{\text{max}} = 1.15 \cdot 1.602 \times 10^{-19}\text{ J} = 1.84 \times 10^{-19}\text{ J}

  2. Step 2

    E=Φ−Kmax  ⟹  E=2.29 eV−1.15 eV=1.14 eVE = \Phi - K_{\text{max}} \implies E = 2.29\text{ eV} - 1.15\text{ eV} = 1.14\text{ eV}

    Correct

    E=Φ+Kmax=2.29 eV+1.15 eV=3.44 eVE = \Phi + K_{\text{max}} = 2.29\text{ eV} + 1.15\text{ eV} = 3.44\text{ eV}

    According to Einstein's photoelectric equation, the total energy of the incident photon is split into overcoming the binding energy (the work function Φ\Phi) and the kinetic energy of the ejected electron (KmaxK_{\text{max}}). Therefore, the photon energy must be the sum, E=Φ+KmaxE = \Phi + K_{\text{max}}, not the difference.

  3. Step 3

    λ=12401.14=1088 nm\lambda = \frac{1240}{1.14} = 1088\text{ nm}

    Correct

    λ=hcE≈1240 eV⋅nm3.44 eV≈360.5 nm≈361 nm\lambda = \frac{hc}{E} \approx \frac{1240\text{ eV}\cdot\text{nm}}{3.44\text{ eV}} \approx 360.5\text{ nm} \approx 361\text{ nm}

    You applied the correct shortcut formula λ=1240 eV⋅nmE\lambda = \frac{1240\text{ eV}\cdot\text{nm}}{E}, but the resulting wavelength was distorted because of the incorrect photon energy carried over from Step 2.

WHAT YOU DID WELL
Compliments from Your Teacher

You correctly related the stopping potential to the maximum kinetic energy via Kmax=eV0K_{\text{max}} = e V_0.

You converted electron-volts to joules using the correct conversion factor.

You correctly identified that the photon wavelength is inversely related to photon energy using λ=hcE\lambda = \frac{hc}{E}.

THE ERROR
Where Your ACEpath Teacher Spotted the Mistake
Sign / rearrangement error in Einstein's photoelectric equation

no

WHY IT HAPPENED
ACEpath Teacher's Diagnosis

You rearranged Einstein's photoelectric equation incorrectly as E=Φ−KmaxE = \Phi - K_{\text{max}}. In the photoelectric effect, the incident photon is the source of all the energy, meaning its energy EE must be strictly greater than the work function Φ\Phi. Energy conservation requires Ephoton=Φ+KmaxE_{\text{photon}} = \Phi + K_{\text{max}}.

REASONING PATH
Your ACEpath teacher’s suggested approach
Photon as the Energy Source
  • An incoming photon delivers energy that first overcomes the binding energy (Φ\Phi) and then imparts kinetic energy (KmaxK_{\text{max}}).

  • Always verify that Ephoton≥ΦE_{\text{photon}} \ge \Phi; write the balance as E=Φ+KmaxE = \Phi + K_{\text{max}} before rearranging.

CORRECTED PATH
ACEpath Teacher's Demonstration
  1. Write energy conservation for the photoelectric effect: E=Φ+KmaxE = \Phi + K_{\text{max}}.

  2. Substitute the known values: E=2.29 eV+1.15 eV=3.44 eVE = 2.29\text{ eV} + 1.15\text{ eV} = 3.44\text{ eV}.

  3. Calculate the incident wavelength: λ=1240 eV⋅nm3.44 eV≈360.5 nm≈361 nm\lambda = \frac{1240\text{ eV}\cdot\text{nm}}{3.44\text{ eV}} \approx 360.5\text{ nm} \approx 361\text{ nm}.

Final answer

(a) Kmax=1.15 eV=1.84×10−19 JK_{\text{max}} = 1.15\text{ eV} = 1.84 \times 10^{-19}\text{ J}; (b) λ=361 nm\lambda = 361\text{ nm}

NEXT STEPS
Final Takeaways from Your Teacher
  • Review energy conservation diagrams for the photoelectric effect to reinforce that photon energy equals the work function plus kinetic energy.

  • Before calculating the wavelength, perform a quick sanity check: verify whether E>ΦE > \Phi, because photoelectric emission cannot occur if the photon energy is less than the work function.

OverviewACEpath Teacher's Diagnosis

02 The student equates the photon energy directly to the stopping energy alone, neglecting the work function of the emitter.

Sample Student Work

Reviewed by ACEpath Teacher
Step-by-Step Review
Walk Through It with Your Teacher
Partially correct
  1. Step 1

    Kmax⁡=1.15 eV  ⟹  Kmax⁡=1.15×1.602×10−19 J=1.84×10−19 JK_{\max} = 1.15\text{ eV} \implies K_{\max} = 1.15 \times 1.602 \times 10^{-19}\text{ J} = 1.84 \times 10^{-19}\text{ J}

  2. Step 2

    E=Kmax⁡=1.15 eVE = K_{\max} = 1.15\text{ eV}

    Correct

    E=Φ+Kmax⁡=2.29 eV+1.15 eV=3.44 eVE = \Phi + K_{\max} = 2.29\text{ eV} + 1.15\text{ eV} = 3.44\text{ eV}

    An incident photon must provide enough energy to overcome the binding energy (work function Φ\Phi) before giving the remaining energy to the electron as kinetic energy.

  3. Step 3

    λ=hcE=12401.15  ⟹  λ=1078 nm\lambda = \frac{hc}{E} = \frac{1240}{1.15} \implies \lambda = 1078\text{ nm}

    Correct

    λ=hcE=1240 eV⋅nm3.44 eV≈361 nm\lambda = \frac{hc}{E} = \frac{1240\text{ eV}\cdot\text{nm}}{3.44\text{ eV}} \approx 361\text{ nm}

    Your formula and substitution method were sound, but the final wavelength was distorted because it inherited the incorrect photon energy from Step 2.

WHAT YOU DID WELL
Compliments from Your Teacher

You correctly calculated the maximum kinetic energy from the stopping potential in electron-volts.

You accurately converted energy from electron-volts to joules using the elementary charge factor.

You correctly identified the inverse relation between photon energy and wavelength λ=hcE\lambda = \frac{hc}{E}.

THE ERROR
Where Your ACEpath Teacher Spotted the Mistake
Omission of Work Function in Photoelectric Energy Conservation

No, this was a conceptual omission of the metal's binding energy rather than an arithmetic slip.

WHY IT HAPPENED
ACEpath Teacher's Diagnosis

You assumed that the stopping potential energy represents the entire photon energy, overlooking that an incident photon must first supply the work function Φ\Phi to liberate the electron from the potassium surface before imparting kinetic energy.

REASONING PATH
Your ACEpath teacher’s suggested approach
Energy Conservation in Photoelectric Effect
  • Ephoton=Φ+Kmax⁡=Φ+eV0E_{\text{photon}} = \Phi + K_{\max} = \Phi + e V_0

  • Always add the metal's work function Φ\Phi to the maximum kinetic energy Kmax⁡K_{\max} to find the total energy carried by each incident photon.

CORRECTED PATH
ACEpath Teacher's Demonstration
  1. Use Einstein's photoelectric equation: E=Φ+Kmax⁡E = \Phi + K_{\max}

  2. Substitute the given work function and calculated kinetic energy: E=2.29 eV+1.15 eV=3.44 eVE = 2.29\text{ eV} + 1.15\text{ eV} = 3.44\text{ eV}

  3. Calculate the wavelength using λ=hcE=1240 eV⋅nm3.44 eV≈360.5 nm≈361 nm\lambda = \frac{hc}{E} = \frac{1240\text{ eV}\cdot\text{nm}}{3.44\text{ eV}} \approx 360.5\text{ nm} \approx 361\text{ nm}

Final answer

(a) Kmax⁡=1.15 eV=1.84×10−19 JK_{\max} = 1.15\text{ eV} = 1.84 \times 10^{-19}\text{ J}; (b) λ=361 nm\lambda = 361\text{ nm}

NEXT STEPS
Final Takeaways from Your Teacher
  • Write down Einstein's photoelectric equation hν=Φ+Kmax⁡h\nu = \Phi + K_{\max} at the start of every photoelectric effect problem before isolating any variable.

  • Check whether the resulting photon energy is strictly greater than the surface work function; if it is not, photoemission could not have occurred.

OverviewACEpath Teacher's Diagnosis

03 The student misinterprets the stopping potential equation as K_max = Φ - e*V_0, resulting in an incorrect maximum kinetic energy and subsequent wavelength.

Sample Student Work

Reviewed by ACEpath Teacher
Step-by-Step Review
Walk Through It with Your Teacher
Incorrect
  1. Step 1

    Kmax⁡=Φ−e⋅V0  ⟹  Kmax⁡=2.29 eV−1.15 eV=1.14 eVK_{\max} = \Phi - e \cdot V_0 \implies K_{\max} = 2.29\text{ eV} - 1.15\text{ eV} = 1.14\text{ eV}

    Correct

    Kmax⁡=eV0=1.15 eVK_{\max} = e V_0 = 1.15\text{ eV}

    The stopping potential V0V_0 directly measures the maximum kinetic energy of the emitted electrons through the work-energy theorem: the electrostatic stopping work required to halt the fastest electron is eV0e V_0, giving Kmax⁡=eV0K_{\max} = e V_0. The work function Φ\Phi should not be subtracted here.

  2. Step 2

    Kmax⁡=1.14×1.602×10−19 J=1.83×10−19 JK_{\max} = 1.14 \times 1.602 \times 10^{-19}\text{ J} = 1.83 \times 10^{-19}\text{ J}

    Correct

    Kmax⁡=1.15×(1.602×10−19 J)≈1.84×10−19 JK_{\max} = 1.15 \times (1.602 \times 10^{-19}\text{ J}) \approx 1.84 \times 10^{-19}\text{ J}

    Your conversion factor from electron-volts to joules is correct, but the numerical result is affected by the incorrect value of Kmax⁡K_{\max} from the previous step.

  3. Step 3

    E=Kmax⁡+Φ=1.14 eV+2.29 eV=3.43 eVE = K_{\max} + \Phi = 1.14\text{ eV} + 2.29\text{ eV} = 3.43\text{ eV}

    Correct

    E=Φ+Kmax⁡=2.29 eV+1.15 eV=3.44 eVE = \Phi + K_{\max} = 2.29\text{ eV} + 1.15\text{ eV} = 3.44\text{ eV}

    You set up Einstein's photoelectric energy balance correctly, but the resulting total photon energy carries forward the previous calculation error.

  4. Step 4

    λ=12403.43=362 nm\lambda = \frac{1240}{3.43} = 362\text{ nm}

    Correct

    λ=hcE=1240 eV⋅nm3.44 eV≈361 nm\lambda = \frac{hc}{E} = \frac{1240\text{ eV}\cdot\text{nm}}{3.44\text{ eV}} \approx 361\text{ nm}

    You correctly used the shortcut formula λ=hcE\lambda = \frac{hc}{E} with hc≈1240 eV⋅nmhc \approx 1240\text{ eV}\cdot\text{nm}, but the final wavelength is slightly off due to the carried-forward value of EE.

WHAT YOU DID WELL
Compliments from Your Teacher

You correctly used the conversion factor 1 eV=1.602×10−19 J1\text{ eV} = 1.602 \times 10^{-19}\text{ J} to convert between energy units.

You correctly recognized that the incident photon energy is the sum of the work function and the maximum kinetic energy.

You correctly related the photon energy to wavelength using λ=hcE\lambda = \frac{hc}{E}.

THE ERROR
Where Your ACEpath Teacher Spotted the Mistake
Misapplied stopping potential relation

no

WHY IT HAPPENED
ACEpath Teacher's Diagnosis

You conflated the stopping potential definition (Kmax⁡=eV0K_{\max} = e V_0) with Einstein's photoelectric equation (Kmax⁡=hf−ΦK_{\max} = hf - \Phi), mistakenly subtracting the electrostatic energy from the work function instead of setting Kmax⁡K_{\max} directly equal to eV0e V_0.

REASONING PATH
Your ACEpath teacher’s suggested approach
Direct Measurement of Kinetic Energy
  • Kmax⁡=eV0K_{\max} = e V_0

  • Whenever a stopping potential V0V_0 is given, equate the maximum kinetic energy directly to eV0e V_0 in electron-volts without subtracting or adding Φ\Phi.

Photoelectric Energy Balance
  • Ephoton=hf=Φ+Kmax⁡=Φ+eV0E_{\text{photon}} = hf = \Phi + K_{\max} = \Phi + e V_0

  • Use the work function only when linking the incident photon energy to the electron's kinetic energy.

CORRECTED PATH
ACEpath Teacher's Demonstration
  1. Set the maximum kinetic energy equal to the stopping potential energy: Kmax⁡=eV0=1.15 eVK_{\max} = e V_0 = 1.15\text{ eV}.

  2. Convert Kmax⁡K_{\max} to joules: Kmax⁡=1.15×1.602×10−19 J≈1.84×10−19 JK_{\max} = 1.15 \times 1.602 \times 10^{-19}\text{ J} \approx 1.84 \times 10^{-19}\text{ J}.

  3. Compute the total photon energy: Ephoton=Φ+Kmax⁡=2.29 eV+1.15 eV=3.44 eVE_{\text{photon}} = \Phi + K_{\max} = 2.29\text{ eV} + 1.15\text{ eV} = 3.44\text{ eV}.

  4. Calculate the incident photon wavelength: λ=hcEphoton=1240 eV⋅nm3.44 eV≈361 nm\lambda = \frac{hc}{E_{\text{photon}}} = \frac{1240\text{ eV}\cdot\text{nm}}{3.44\text{ eV}} \approx 361\text{ nm}.

Final answer

(a) Kmax⁡=1.15 eV=1.84×10−19 JK_{\max} = 1.15\text{ eV} = 1.84 \times 10^{-19}\text{ J}; (b) λ=361 nm\lambda = 361\text{ nm}

NEXT STEPS
Final Takeaways from Your Teacher
  • Review the physical meaning of stopping potential as the voltage needed to turn around the most energetic electrons, which gives Kmax⁡=eV0K_{\max} = e V_0 directly.

  • Practice separating the experimental measurement step (V0→Kmax⁡V_0 \to K_{\max}) from the photon conservation step (Ephoton=Φ+Kmax⁡E_{\text{photon}} = \Phi + K_{\max}).

  • Work through the practice cards below to reinforce the distinction between stopping potential and the photoelectric work function.

Lock it in

Similar question

01

A cesium surface has a work function Φ=2.14 eV\Phi = 2.14\text{ eV}. When illuminated with monochromatic light, the stopping potential of the photoelectrons is measured to be V0=0.86 VV_0 = 0.86\text{ V}. Find the energy of the incident photons in eV\text{eV} and the corresponding wavelength λ\lambda in nm\text{nm}. (Use hc≈1240 eV⋅nmhc \approx 1240\text{ eV}\cdot\text{nm}).

Answer

E=3.00 eVE = 3.00\text{ eV}, λ≈413 nm\lambda \approx 413\text{ nm}. Key steps: Kmax=eV0=0.86 eVK_{\text{max}} = e V_0 = 0.86\text{ eV}. Energy conservation gives E=Φ+Kmax=2.14 eV+0.86 eV=3.00 eVE = \Phi + K_{\text{max}} = 2.14\text{ eV} + 0.86\text{ eV} = 3.00\text{ eV}. Then λ=12403.00≈413.3 nm\lambda = \frac{1240}{3.00} \approx 413.3\text{ nm}.

02

Light of wavelength λ=250 nm\lambda = 250\text{ nm} strikes a clean aluminum surface (Φ=4.08 eV\Phi = 4.08\text{ eV}). Calculate: (a) the energy of an incident photon in eV\text{eV}, and (b) the stopping potential V0V_0 required to reduce the photocurrent to zero.

Answer

(a) E≈4.96 eVE \approx 4.96\text{ eV}; (b) V0=0.88 VV_0 = 0.88\text{ V}. Key steps: E=1240 eV⋅nm250 nm=4.96 eVE = \frac{1240\text{ eV}\cdot\text{nm}}{250\text{ nm}} = 4.96\text{ eV}. Rearranging Einstein's equation gives Kmax=E−Φ=4.96 eV−4.08 eV=0.88 eVK_{\text{max}} = E - \Phi = 4.96\text{ eV} - 4.08\text{ eV} = 0.88\text{ eV}. Since Kmax=eV0K_{\text{max}} = e V_0, V0=0.88 VV_0 = 0.88\text{ V}.

03

In a photoelectric setup, radiation of frequency f1=1.20×1015 Hzf_1 = 1.20 \times 10^{15}\text{ Hz} produces electrons with a stopping potential of 2.50 V2.50\text{ V}. When the frequency is changed to f2f_2, the stopping potential drops to 1.00 V1.00\text{ V}. Using h≈4.136×10−15 eV⋅sh \approx 4.136 \times 10^{-15}\text{ eV}\cdot\text{s}, determine the work function Φ\Phi of the target metal and the second frequency f2f_2.

Answer

Φ≈2.46 eV\Phi \approx 2.46\text{ eV}, f2≈8.37×1014 Hzf_2 \approx 8.37 \times 10^{14}\text{ Hz}. Key steps: Photon energy 1 is E1=hf1=(4.136×10−15)(1.20×1015)≈4.963 eVE_1 = h f_1 = (4.136 \times 10^{-15})(1.20 \times 10^{15}) \approx 4.963\text{ eV}. Since Kmax,1=2.50 eVK_{\text{max},1} = 2.50\text{ eV}, Φ=E1−Kmax,1=4.963−2.50=2.463 eV≈2.46 eV\Phi = E_1 - K_{\text{max},1} = 4.963 - 2.50 = 2.463\text{ eV} \approx 2.46\text{ eV}. For the second frequency, E2=Φ+Kmax,2=2.463+1.00=3.463 eVE_2 = \Phi + K_{\text{max},2} = 2.463 + 1.00 = 3.463\text{ eV}. Thus f2=E2h=3.463 eV4.136×10−15 eV⋅s≈8.37×1014 Hzf_2 = \frac{E_2}{h} = \frac{3.463\text{ eV}}{4.136 \times 10^{-15}\text{ eV}\cdot\text{s}} \approx 8.37 \times 10^{14}\text{ Hz}.

Loading workspace…