Resources

A spacecraft thruster expels gas bursts to provide an impulse J0=1.20×103 N⋅sJ_0 = 1.20\times 10^3\text{ N}\cdot\text{s} over a burn duration τ\tau. The thrust force profile is modeled as an isosceles triangle: F(t)=2Fmax⁡τtF(t) = \frac{2F_{\max}}{\tau}t for 0≤t≤τ20 \le t \le \frac{\tau}{2}, and F(t)=2Fmax⁡(1−tτ)F(t) = 2F_{\max}\left(1 - \frac{t}{\tau}\right) for τ2≤t≤τ\frac{\tau}{2} \le t \le \tau. (a) Derive the relationship between Fmax⁡F_{\max}, J0J_0, and τ\tau, and calculate Fmax⁡F_{\max} when τ=0.400 s\tau = 0.400\text{ s}. (b) Evaluate the asymptotic limit of the instantaneous peak force Fmax⁡F_{\max} as the burn duration τ→0\tau \to 0 while total impulse J0J_0 remains strictly constant, and state the physical interpretation of this limit.

Answer and steps

Final answer

(a) Fmax⁡=2J0τ=6.00×103 NF_{\max} = \frac{2J_0}{\tau} = 6.00\times 10^3\text{ N}; (b) lim⁡τ→0Fmax⁡=∞\lim_{\tau \to 0} F_{\max} = \infty, representing the mathematical idealization of an instantaneous collision governed by the Dirac delta impulse J⃗(t)=J0δ(t)n^\vec{J}(t) = J_0\delta(t)\hat{n} with infinite peak force

Steps

Part (a): Relationship Between Fmax⁡F_{\max}, J0J_0, and τ\tau

  1. Understand the definition of impulse: Impulse J0J_0 represents the time integral of the force over the interaction interval, which corresponds geometrically to the area under the force-versus-time graph F(t)F(t): J0=∫0τF(t) dtJ_0 = \int_{0}^{\tau} F(t)\,dt
  2. Calculate the area of the force profile: The force profile is an isosceles triangle with:

    • Base length =τ= \tau
    • Height =Fmax⁡= F_{\max}

    Using the geometric formula for the area of a triangle: Area=12⋅base⋅height=12τFmax⁡\text{Area} = \frac{1}{2} \cdot \text{base} \cdot \text{height} = \frac{1}{2}\tau F_{\max}

    (Alternative verification via calculus:) J0=∫0τ/22Fmax⁡τt dt+∫τ/2τ2Fmax⁡(1−tτ)dt=14Fmax⁡τ+14Fmax⁡τ=12Fmax⁡τJ_0 = \int_{0}^{\tau/2} \frac{2F_{\max}}{\tau}t\,dt + \int_{\tau/2}^{\tau} 2F_{\max}\left(1 - \frac{t}{\tau}\right)dt = \frac{1}{4}F_{\max}\tau + \frac{1}{4}F_{\max}\tau = \frac{1}{2}F_{\max}\tau

  3. Solve for Fmax⁡F_{\max}: J0=12Fmax⁡τ  ⟹  Fmax⁡=2J0τJ_0 = \frac{1}{2}F_{\max}\tau \implies F_{\max} = \frac{2J_0}{\tau}
  4. Calculate Fmax⁡F_{\max} for τ=0.400 s\tau = 0.400\text{ s}: Substitute J0=1.20×103 N⋅sJ_0 = 1.20\times 10^3\text{ N}\cdot\text{s} and τ=0.400 s\tau = 0.400\text{ s}: Fmax⁡=2(1.20×103 N⋅s)0.400 s=6.00×103 NF_{\max} = \frac{2(1.20\times 10^3\text{ N}\cdot\text{s})}{0.400\text{ s}} = 6.00\times 10^3\text{ N}

Part (b): Asymptotic Limit and Physical Interpretation

  1. Evaluate the limit as τ→0\tau \to 0: Holding the total delivered impulse J0J_0 strictly constant while the duration τ\tau shrinks toward zero gives: lim⁡τ→0Fmax⁡=lim⁡τ→0(2J0τ)=∞\lim_{\tau \to 0} F_{\max} = \lim_{\tau \to 0} \left(\frac{2J_0}{\tau}\right) = \infty
  2. Physical interpretation:

    • In real physical systems, a force cannot become infinite. However, as the duration of an impact or thrust becomes negligibly small compared to the overall timescale of motion, the force profile narrows and spikes.
    • In the theoretical limit τ→0\tau \to 0, the force approaches a Dirac delta function: F⃗(t)=J0 δ(t) n^\vec{F}(t) = J_0\,\delta(t)\,\hat{n}
    • This represents an idealized instantaneous collision or impulse, where a finite change in momentum occurs in zero elapsed time through an infinite instantaneous peak force.

Typical errors

OverviewACEpath Teacher's Diagnosis

01 The student treats the thrust force as constant rather than triangular, omitting the factor of 1/2 from the area.

Sample Student Work

Reviewed by ACEpath Teacher
Step-by-Step Review
Walk Through It with Your Teacher
Partially correct
  1. Step 1

    J0=Fmax⁡⋅τ  ⟹  Fmax⁡=J0τJ_0 = F_{\max} \cdot \tau \implies F_{\max} = \frac{J_0}{\tau}

    Correct

    J0=12Fmax⁡τ  ⟹  Fmax⁡=2J0τJ_0 = \frac{1}{2}F_{\max}\tau \implies F_{\max} = \frac{2J_0}{\tau}

    The thrust profile is triangular, so the impulse equals the area of a triangle, Area=12⋅base⋅height=12Fmax⁡τ\text{Area} = \frac{1}{2} \cdot \text{base} \cdot \text{height} = \frac{1}{2}F_{\max}\tau. By writing J0=Fmax⁡τJ_0 = F_{\max}\tau, you omitted the factor of 12\frac{1}{2}.

  2. Step 2

    Fmax⁡=1.20×103 N⋅s0.400 s=3.00×103 NF_{\max} = \frac{1.20 \times 10^3\text{ N}\cdot\text{s}}{0.400\text{ s}} = 3.00 \times 10^3\text{ N}

    Correct

    Fmax⁡=2(1.20×103 N⋅s)0.400 s=6.00×103 NF_{\max} = \frac{2(1.20 \times 10^3\text{ N}\cdot\text{s})}{0.400\text{ s}} = 6.00 \times 10^3\text{ N}

    You correctly substituted your values into your derived equation, but the missing factor of 22 from Step 1 caused the numerical value to be halved.

  3. Step 3

    lim⁡τ→0Fmax⁡=lim⁡τ→0(J0τ)=∞\lim_{\tau \to 0} F_{\max} = \lim_{\tau \to 0} \left(\frac{J_0}{\tau}\right) = \infty ⟹ As burn duration goes to zero, the peak force diverges to infinity to deliver a non-zero impulse instantaneously, representing an idealized impact.

WHAT YOU DID WELL
Compliments from Your Teacher

You correctly recognized that the asymptotic limit of peak force as τ→0\tau \to 0 is infinite.

You clearly explained that an infinite peak force over zero duration represents an idealized instantaneous impact delivering finite impulse.

THE ERROR
Where Your ACEpath Teacher Spotted the Mistake
Omission of Geometric Area Factor in Impulse Integral

You treated the thrust profile as a constant rectangular force Fmax⁡F_{\max} over time τ\tau instead of an isosceles triangle with area 12Fmax⁡τ\frac{1}{2}F_{\max}\tau.

WHY IT HAPPENED
ACEpath Teacher's Diagnosis

Confusing average force with peak force in time-varying profiles. For a constant force, J=FΔtJ = F\Delta t, but for linear ramp-up and ramp-down profiles, the total impulse corresponds to the geometric area under F(t)F(t), which requires the triangular factor of 12\frac{1}{2}.

REASONING PATH
Your ACEpath teacher’s suggested approach
Impulse as Geometric Area
  • Impulse is defined as J=∫F(t) dtJ = \int F(t)\,dt, which geometrically equals the area under the F–tF\text{--}t curve.

  • Always sketch the F(t)F(t) graph or check its geometric shape (rectangle, triangle, half-sine) before relating peak force to impulse.

Peak Force vs. Average Force
  • For a symmetric triangular pulse with peak Fmax⁡F_{\max}, the average force is Favg=12Fmax⁡F_{\text{avg}} = \frac{1}{2}F_{\max}.

  • Use J=FavgΔt=12Fmax⁡τJ = F_{\text{avg}}\Delta t = \frac{1}{2}F_{\max}\tau, giving Fmax⁡=2JτF_{\max} = \frac{2J}{\tau}.

CORRECTED PATH
ACEpath Teacher's Demonstration
  1. Set the impulse equal to the area of the triangular force profile: J0=12Fmax⁡τJ_0 = \frac{1}{2}F_{\max}\tau.

  2. Solve for the peak force: Fmax⁡=2J0τF_{\max} = \frac{2J_0}{\tau}.

  3. Substitute J0=1.20×103 N⋅sJ_0 = 1.20 \times 10^3\text{ N}\cdot\text{s} and τ=0.400 s\tau = 0.400\text{ s}: Fmax⁡=2(1.20×103)0.400=6.00×103 NF_{\max} = \frac{2(1.20 \times 10^3)}{0.400} = 6.00 \times 10^3\text{ N}.

Final answer

(a) Fmax⁡=2J0τ=6.00×103 NF_{\max} = \frac{2J_0}{\tau} = 6.00 \times 10^3\text{ N}; (b) lim⁡τ→0Fmax⁡=∞\lim_{\tau \to 0} F_{\max} = \infty, representing an idealized instantaneous impulse (Dirac delta force).

NEXT STEPS
Final Takeaways from Your Teacher
  • Review the area formulas for common force-time pulse profiles (triangular, trapezoidal, sinusoidal).

  • Practice converting between peak force Fmax⁡F_{\max} and average force FavgF_{\text{avg}} before calculating impulse.

OverviewACEpath Teacher's Diagnosis

02 The student integrates over only the first half of the triangular pulse from 0 to τ/2, calculating half of the total impulse.

Sample Student Work

Reviewed by ACEpath Teacher
Step-by-Step Review
Walk Through It with Your Teacher
Partially correct
  1. Step 1

    J0=∫0τ/22Fmax⁡τt dt=(2Fmax⁡τ)[t22]0τ/2=14Fmax⁡τJ_0 = \int_0^{\tau/2} \frac{2F_{\max}}{\tau} t\,dt = \left(\frac{2F_{\max}}{\tau}\right)\left[\frac{t^2}{2}\right]_0^{\tau/2} = \frac{1}{4}F_{\max}\tau

    Correct

    J0=∫0τF(t) dt=2∫0τ/22Fmax⁡τt dt=12Fmax⁡τJ_0 = \int_0^{\tau} F(t)\,dt = 2\int_0^{\tau/2} \frac{2F_{\max}}{\tau} t\,dt = \frac{1}{2}F_{\max}\tau

    You integrated over only the ramp-up phase from t=0t = 0 to t=τ2t = \frac{\tau}{2}. The total burn lasts for the full duration τ\tau. Because the pulse is symmetric, the total impulse is twice this integral, or simply the area of the whole triangle: 12×base×height=12Fmax⁡τ\frac{1}{2} \times \text{base} \times \text{height} = \frac{1}{2}F_{\max}\tau.

  2. Step 2

    Fmax⁡=4J0τF_{\max} = \frac{4J_0}{\tau}

    Correct

    Fmax⁡=2J0τF_{\max} = \frac{2J_0}{\tau}

    You rearranged your impulse equation correctly, but this formula inherits the missing factor of 22 from the truncated integration interval in Step 1.

  3. Step 3

    Fmax⁡=4⋅1.20×1030.400=1.20×104 NF_{\max} = \frac{4 \cdot 1.20 \times 10^3}{0.400} = 1.20 \times 10^4\text{ N}

    Correct

    Fmax⁡=2(1.20×103 N⋅s)0.400 s=6.00×103 NF_{\max} = \frac{2(1.20 \times 10^3\text{ N}\cdot\text{s})}{0.400\text{ s}} = 6.00 \times 10^3\text{ N}

    You substituted the numerical parameters and evaluated the arithmetic accurately, but the result is double the correct value due to the upstream factor of 44.

  4. Step 4

    lim⁡τ→0Fmax⁡=lim⁡τ→0(4J0τ)=∞  ⟹  An instantaneous impulse delivering finite momentum requires an infinitely large force spike.\lim_{\tau \to 0} F_{\max} = \lim_{\tau \to 0} \left(\frac{4J_0}{\tau}\right) = \infty \implies \text{An instantaneous impulse delivering finite momentum requires an infinitely large force spike.}

WHAT YOU DID WELL
Compliments from Your Teacher

You correctly recognized that impulse is the integral of the force profile over time.

You executed the definite integration polynomial power rule and boundary substitution accurately.

You correctly evaluated the limit as τ→0\tau \to 0 and gave a clear physical interpretation of an instantaneous impulse.

THE ERROR
Where Your ACEpath Teacher Spotted the Mistake
Truncated Integration Domain

You integrated only up to t=τ2t = \frac{\tau}{2} instead of accounting for the entire triangular force profile up to t=τt = \tau.

WHY IT HAPPENED
ACEpath Teacher's Diagnosis

Conflating the domain of a piecewise definition with the entire interaction interval. When a profile is piecewise defined, the total impulse must be obtained by summing integrals across all piecewise sub-intervals or by exploiting symmetry across the whole domain.

REASONING PATH
Your ACEpath teacher’s suggested approach
Verify Domain Bounds
  • Total impulse J0=∫titfF(t) dtJ_0 = \int_{t_i}^{t_f} F(t)\,dt requires integration over the complete duration from tit_i to tft_f.

  • Always verify that the upper limit of integration covers the end of the force interaction, or multiply by 22 when using half-interval symmetry.

Geometric Sanity Check
  • For standard geometric force profiles (triangles, rectangles, trapezoids), Area under F(t)F(t) must equal ∫F(t) dt\int F(t)\,dt.

  • Check your calculus result against basic geometry: for a triangle, Area =12×base×height=12τFmax⁡= \frac{1}{2} \times \text{base} \times \text{height} = \frac{1}{2}\tau F_{\max}.

CORRECTED PATH
ACEpath Teacher's Demonstration
  1. Set up the total impulse as the area under the full triangular profile: J0=12τFmax⁡J_0 = \frac{1}{2}\tau F_{\max}.

  2. Solve for peak force: Fmax⁡=2J0τF_{\max} = \frac{2J_0}{\tau}.

  3. Substitute values: Fmax⁡=2(1.20×103 N⋅s)0.400 s=6.00×103 NF_{\max} = \frac{2(1.20\times 10^3\text{ N}\cdot\text{s})}{0.400\text{ s}} = 6.00\times 10^3\text{ N}.

Final answer

(a) Fmax⁡=2J0τ=6.00×103 NF_{\max} = \frac{2J_0}{\tau} = 6.00\times 10^3\text{ N}; (b) lim⁡τ→0Fmax⁡=∞\lim_{\tau \to 0} F_{\max} = \infty, representing an idealized instantaneous collision (Dirac delta force).

NEXT STEPS
Final Takeaways from Your Teacher
  • Always perform a geometric area check ( 12bh \,\frac{1}{2}bh\,) before doing piecewise integration for simple shapes.

  • Double-check that piecewise integrals include all time segments from t=0t = 0 to t=τt = \tau.

OverviewACEpath Teacher's Diagnosis

03 The student confuses the duration approaching zero with total impulse approaching zero, incorrectly concluding that peak force vanishes.

Sample Student Work

Reviewed by ACEpath Teacher
Step-by-Step Review
Walk Through It with Your Teacher
Partially correct
  1. Step 1

    J0=12⋅τ⋅Fmax⁡  ⟹  Fmax⁡=2J0τJ_0 = \frac{1}{2} \cdot \tau \cdot F_{\max} \implies F_{\max} = \frac{2J_0}{\tau}

  2. Step 2

    Fmax⁡=2(1.20×103)0.400=6.00×103 NF_{\max} = \frac{2(1.20 \times 10^3)}{0.400} = 6.00 \times 10^3\text{ N}

  3. Step 3

    lim⁡τ→0Fmax⁡=0\lim_{\tau \to 0} F_{\max} = 0

    Correct

    lim⁡τ→0Fmax⁡=lim⁡τ→0(2J0τ)=∞\lim_{\tau \to 0} F_{\max} = \lim_{\tau \to 0} \left(\frac{2J_0}{\tau}\right) = \infty

    Because J0J_0 is held strictly constant in the numerator and τ\tau in the denominator approaches zero from the right, the quotient grows without bound toward +∞+\infty, not 00.

  4. Step 4

    When the burn duration shrinks to zero, no thrust can be produced so the peak force drops to zero.

    Correct

    As τ→0\tau \to 0 with constant impulse J0J_0, the force profile concentrates into an infinitely tall, infinitely narrow spike modeled by the Dirac delta impulse F⃗(t)=J0δ(t)n^\vec{F}(t) = J_0\delta(t)\hat{n}, representing an idealized instantaneous impulse.

    You reasoned that no burn duration means no force, but keeping total impulse constant requires the force to spike to infinity to deliver the full momentum transfer in vanishing time.

WHAT YOU DID WELL
Compliments from Your Teacher

You correctly modeled the total impulse as the geometric area under the triangular force-time curve.

You solved algebraically for the peak force in terms of impulse and burn duration.

You accurately calculated the numerical peak force for τ=0.400 s\tau = 0.400\text{ s}.

THE ERROR
Where Your ACEpath Teacher Spotted the Mistake
Fixed-area reciprocal scaling error

no

WHY IT HAPPENED
ACEpath Teacher's Diagnosis

You treated the limit intuitively as 'shorter duration means less action' rather than applying the algebraic reciprocal relationship lim⁡τ→02J0τ\lim_{\tau \to 0} \frac{2J_0}{\tau}, which enforces that a fixed area over a vanishing width requires an infinite height.

REASONING PATH
Your ACEpath teacher’s suggested approach
Reciprocal Limit Check
  • For a constant C>0C > 0, lim⁡x→0+Cx=+∞\lim_{x \to 0^+} \frac{C}{x} = +\infty.

  • Always substitute your derived algebraic expression into the limit before interpreting the physical behavior.

Constant Area Constraint
  • Impulse is the area under F(t)F(t). If area is fixed and base width τ→0\tau \to 0, the height must blow up to infinity.

  • Picture squeezing the base of a triangle while keeping its area constant: the peak must grow taller, approaching a Dirac delta function.

CORRECTED PATH
ACEpath Teacher's Demonstration
  1. Take the limit of your derived formula Fmax⁡=2J0τF_{\max} = \frac{2J_0}{\tau} as τ→0+\tau \to 0^+, holding J0J_0 constant: lim⁡τ→0Fmax⁡=lim⁡τ→0(2J0τ)=∞\lim_{\tau \to 0} F_{\max} = \lim_{\tau \to 0} \left(\frac{2J_0}{\tau}\right) = \infty.

  2. Interpret the physical meaning: delivering a finite change in momentum in zero time requires an infinitely large instantaneous force, mathematically described by a Dirac delta function F⃗(t)=J0δ(t)n^\vec{F}(t) = J_0\delta(t)\hat{n}.

Final answer

lim⁡τ→0Fmax⁡=∞\lim_{\tau \to 0} F_{\max} = \infty, representing an idealized instantaneous collision modeled by a Dirac delta impulse.

NEXT STEPS
Final Takeaways from Your Teacher
  • Practice evaluating limits where an integrated quantity (like impulse or work) remains constant while the interval shrinks to zero.

  • Review the connection between narrow, high-force pulses and the Dirac delta function idealization in impulse-momentum problems.

Lock it in

Similar question

01

A hammer strikes a nail delivering a total impulse of J=45.0 N⋅sJ = 45.0\text{ N}\cdot\text{s} over a collision time of Δt=1.50×10−2 s\Delta t = 1.50 \times 10^{-2}\text{ s}. Assuming the force profile is symmetric and triangular, calculate the maximum force Fmax⁡F_{\max} exerted on the nail.

Answer

Fmax⁡=6.00×103 NF_{\max} = 6.00 \times 10^3\text{ N}. Key steps: Area of triangle is J=12Fmax⁡Δt  ⟹  Fmax⁡=2JΔt=2(45.0)1.50×10−2=6.00×103 NJ = \frac{1}{2}F_{\max}\Delta t \implies F_{\max} = \frac{2J}{\Delta t} = \frac{2(45.0)}{1.50 \times 10^{-2}} = 6.00 \times 10^3\text{ N}.

02

An actuator delivers an impulse J0J_0 using a trapezoidal force profile: force ramps up linearly from 00 to Fmax⁡F_{\max} over time τ4\frac{\tau}{4}, stays constant at Fmax⁡F_{\max} for time τ2\frac{\tau}{2}, and ramps down linearly to 00 over time τ4\frac{\tau}{4}. Express Fmax⁡F_{\max} in terms of J0J_0 and τ\tau.

Answer

Fmax⁡=4J03τF_{\max} = \frac{4J_0}{3\tau}. Key steps: The trapezoid has parallel bases b1=τb_1 = \tau and b2=τ2b_2 = \frac{\tau}{2}, with height Fmax⁡F_{\max}. Area is J0=b1+b22Fmax⁡=τ+0.5τ2Fmax⁡=34τFmax⁡  ⟹  Fmax⁡=4J03τJ_0 = \frac{b_1 + b_2}{2}F_{\max} = \frac{\tau + 0.5\tau}{2}F_{\max} = \frac{3}{4}\tau F_{\max} \implies F_{\max} = \frac{4J_0}{3\tau}.

03

A force profile is given by a half-sine wave F(t)=Fmax⁡sin⁡(πtτ)F(t) = F_{\max}\sin\left(\frac{\pi t}{\tau}\right) for 0≤t≤τ0 \le t \le \tau. (a) Determine the ratio of peak force Fmax⁡F_{\max} to average force FavgF_{\text{avg}}. (b) If J0=50.0 N⋅sJ_0 = 50.0\text{ N}\cdot\text{s} and τ=0.0500 s\tau = 0.0500\text{ s}, calculate Fmax⁡F_{\max}.

Answer

(a) Fmax⁡Favg=π2≈1.57\frac{F_{\max}}{F_{\text{avg}}} = \frac{\pi}{2} \approx 1.57; (b) Fmax⁡=1.57×103 NF_{\max} = 1.57 \times 10^3\text{ N}. Key steps: J0=∫0τFmax⁡sin⁡(πt/τ) dt=2πFmax⁡τJ_0 = \int_0^\tau F_{\max}\sin(\pi t / \tau)\,dt = \frac{2}{\pi}F_{\max}\tau. Since J0=FavgτJ_0 = F_{\text{avg}}\tau, Favg=2πFmax⁡  ⟹  Fmax⁡Favg=π2F_{\text{avg}} = \frac{2}{\pi}F_{\max} \implies \frac{F_{\max}}{F_{\text{avg}}} = \frac{\pi}{2}. Then Fmax⁡=πJ02τ=π(50.0)2(0.0500)=500π≈1571 NF_{\max} = \frac{\pi J_0}{2\tau} = \frac{\pi(50.0)}{2(0.0500)} = 500\pi \approx 1571\text{ N}.

Loading workspace…