Resources

An instrument payload is lowered vertically into a test shaft by a crane cable. During the descent, the cable maintains a constant upward tension of T=382 NT = 382\text{ N}. High-speed tracking instruments determine that the payload decelerates downward from an initial downward speed of v0=8.40 m/sv_0 = 8.40\text{ m/s} to a complete stop over a vertical displacement of Δy=12.0 m\Delta y = 12.0\text{ m} with uniform acceleration. Assuming air resistance is negligible and using g=9.80 m/s2g = 9.80\text{ m/s}^2, calculate the unknown mass mm of the payload.

Answer and steps

Final answer

m=30.0 kgm = 30.0\text{ kg}

Steps

01

Determine the acceleration using kinematics

To find the mass of the payload, we first determine its acceleration from the kinematic data, then apply Newton's second law to the vertical forces acting on it.

Choose the upward vertical direction as positive. The given motion parameters are:

  • Initial velocity: v0=−8.40 m/sv_0 = -8.40\text{ m/s} (directed downward)
  • Final velocity: v=0 m/sv = 0\text{ m/s}
  • Vertical displacement: Δy=−12.0 m\Delta y = -12.0\text{ m} (directed downward)

Using the kinematic relation connecting velocities, constant acceleration aa, and displacement: v2=v02+2aΔyv^2 = v_0^2 + 2a\Delta y

Substitute the values into the equation: 02=(−8.40)2+2a(−12.0)0^2 = (-8.40)^2 + 2a(-12.0) 0=70.56−24.0a0 = 70.56 - 24.0a 24.0a=70.5624.0a = 70.56 a=70.5624.0=2.94 m/s2a = \frac{70.56}{24.0} = 2.94\text{ m/s}^2

Because a>0a > 0, the acceleration is directed upward. This makes physical sense: for an object moving downward to slow to a stop, the net acceleration must oppose the direction of motion.


02

Apply Newton's second law

Two forces act along the vertical axis on the payload:

  1. Upward tension from the cable: T=382 NT = 382\text{ N}
  2. Downward gravitational force (weight): W=mgW = mg

According to Newton's second law, ΣFy=ma\Sigma F_y = ma: T−mg=maT - mg = ma

Rearrange the equation to isolate the mass mm: T=m(g+a)T = m(g + a) m=Tg+am = \frac{T}{g + a}


03

Calculate the mass

Substitute T=382 NT = 382\text{ N}, g=9.80 m/s2g = 9.80\text{ m/s}^2, and a=2.94 m/s2a = 2.94\text{ m/s}^2: m=3829.80+2.94=38212.74≈30.0 kgm = \frac{382}{9.80 + 2.94} = \frac{382}{12.74} \approx 30.0\text{ kg}

Common Pitfall: A common error is assuming that because the payload is descending, the acceleration must be directed downward. Deceleration (slowing down) always means the acceleration vector points in the direction opposite to velocity. Since the velocity is downward, the acceleration must point upward, meaning T>mgT > mg.

Typical errors

OverviewACEpath Teacher's Diagnosis

01 The student assumes downward motion implies downward acceleration, erroneously setting T - mg = -ma or mg - T = ma, which subtracts acceleration from g.

Sample Student Work

Reviewed by ACEpath Teacher
Step-by-Step Review
Walk Through It with Your Teacher
Incorrect
  1. Step 1

    v2=v02+2ad  ⟹  0=8.402−2(a)(12.0)  ⟹  a=70.5624.0=2.94 m/s2v^2 = v_0^2 + 2ad \implies 0 = 8.40^2 - 2(a)(12.0) \implies a = \frac{70.56}{24.0} = 2.94\text{ m/s}^2

  2. Step 2

    mg−T=ma  ⟹  m(g−a)=T  ⟹  m(9.80−2.94)=382mg - T = ma \implies m(g - a) = T \implies m(9.80 - 2.94) = 382

    Correct

    T−mg=ma  ⟹  m(g+a)=T  ⟹  m(9.80+2.94)=382T - mg = ma \implies m(g + a) = T \implies m(9.80 + 2.94) = 382

    Because the payload is descending and slowing down, its acceleration points opposite to its motion (upward). Therefore, the upward tension must exceed the downward weight, leading to ΣFy=T−mg=ma\Sigma F_y = T - mg = ma rather than mg−T=mamg - T = ma.

  3. Step 3

    m=3826.86=55.7 kgm = \frac{382}{6.86} = 55.7\text{ kg}

    Correct

    m=38212.74≈30.0 kgm = \frac{382}{12.74} \approx 30.0\text{ kg}

    This numerical result was affected by the sign error in your Newton's second law equation.

WHAT YOU DID WELL
Compliments from Your Teacher

You selected the appropriate kinematic relationship to calculate the acceleration magnitude.

You correctly isolated the variable mm from your linear equation.

THE ERROR
Where Your ACEpath Teacher Spotted the Mistake
Sign error from conflating velocity direction with acceleration direction

no

WHY IT HAPPENED
ACEpath Teacher's Diagnosis

You assumed that because the object was moving downward, the net force and acceleration must also be directed downward, whereas a slowing downward object must have an upward net force and upward acceleration.

REASONING PATH
Your ACEpath teacher’s suggested approach
Deceleration Direction Rule
  • When an object slows down, its acceleration vector points in the opposite direction of its velocity vector.

  • Always sketch the velocity vector and check whether the object is speeding up or slowing down before assigning the direction of a⃗\vec{a}.

Net Force Consistency
  • Newton's second law requires ΣF⃗=ma⃗\Sigma \vec{F} = m\vec{a}, meaning the net force always points in the same direction as the acceleration.

  • Ensure the larger force pulls in the direction of acceleration: if a⃗\vec{a} is upward, T>mgT > mg, so T−mg=maT - mg = ma.

CORRECTED PATH
ACEpath Teacher's Demonstration
  1. Recognize that downward motion combined with deceleration means a⃗\vec{a} is directed upward.

  2. Apply Newton's second law with upward as positive: T−mg=maT - mg = ma.

  3. Factor out mass: T=m(g+a)T = m(g + a).

  4. Solve for mm: m=Tg+a=3829.80+2.94=38212.74=30.0 kgm = \frac{T}{g + a} = \frac{382}{9.80 + 2.94} = \frac{382}{12.74} = 30.0\text{ kg}.

Final answer

m=30.0 kgm = 30.0\text{ kg}

NEXT STEPS
Final Takeaways from Your Teacher
  • Draw a free-body diagram alongside velocity and acceleration arrows before writing ΣF=ma\Sigma F = ma.

  • Check whether your answer implies T>mgT > mg or T<mgT < mg and confirm it matches the physical situation.

OverviewACEpath Teacher's Diagnosis

02 The student omits the acceleration term altogether, incorrectly treating the payload as being in static equilibrium during its descent.

Sample Student Work

Reviewed by ACEpath Teacher
Step-by-Step Review
Walk Through It with Your Teacher
Incorrect
  1. Step 1

    T=mg  ⟹  382=m(9.80)T = mg \implies 382 = m(9.80)

    Correct

    ΣFy=T−mg=ma\Sigma F_y = T - mg = ma

    You treated the payload as having zero net acceleration. Because the payload slows down from 8.40 m/s8.40\text{ m/s} to a stop over 12.0 m12.0\text{ m}, it experiences an upward acceleration of a=2.94 m/s2a = 2.94\text{ m/s}^2, which means T−mg=maT - mg = ma rather than T=mgT = mg.

  2. Step 2

    m=382/9.80=39.0 kgm = 382 / 9.80 = 39.0\text{ kg}

    Correct

    m=Tg+a=3829.80+2.94=30.0 kgm = \frac{T}{g + a} = \frac{382}{9.80 + 2.94} = 30.0\text{ kg}

    Your arithmetic was carried out correctly based on your equilibrium equation, but the resulting mass is too large because the acceleration term was omitted.

WHAT YOU DID WELL
Compliments from Your Teacher

You correctly identified the tension force and gravitational force acting along the vertical axis.

You used the correct standard value for gravitational acceleration (g=9.80 m/s2g = 9.80\text{ m/s}^2).

THE ERROR
Where Your ACEpath Teacher Spotted the Mistake
Equilibrium assumption during accelerated motion

no

WHY IT HAPPENED
ACEpath Teacher's Diagnosis

You treated an object in accelerated motion as if it were in static equilibrium (a=0a = 0), overlooking the kinematic information provided to determine non-zero acceleration.

REASONING PATH
Your ACEpath teacher’s suggested approach
Check for changes in velocity
  • If an object's speed or direction changes, ΣF=ma≠0\Sigma F = ma \neq 0.

  • Calculate the acceleration using kinematic equations before setting up Newton's second law.

Identify acceleration direction when slowing down
  • When an object slows down, the acceleration vector points opposite to the velocity vector.

  • Since the payload moves downward and slows down, its acceleration points upward, requiring T>mgT > mg.

CORRECTED PATH
ACEpath Teacher's Demonstration
  1. Find acceleration from kinematics: v2=v02+2aΔy  ⟹  02=(−8.40)2+2a(−12.0)v^2 = v_0^2 + 2a\Delta y \implies 0^2 = (-8.40)^2 + 2a(-12.0), giving a=2.94 m/s2a = 2.94\text{ m/s}^2 (upward).

  2. Apply Newton's second law along the vertical axis: T−mg=maT - mg = ma.

  3. Factor out the mass: m(g+a)=T  ⟹  m=Tg+am(g + a) = T \implies m = \frac{T}{g + a}.

  4. Substitute the known values: m=3829.80+2.94=38212.74=30.0 kgm = \frac{382}{9.80 + 2.94} = \frac{382}{12.74} = 30.0\text{ kg}.

Final answer

m=30.0 kgm = 30.0\text{ kg}

NEXT STEPS
Final Takeaways from Your Teacher
  • Before writing force equations, always check whether the velocity is constant or changing.

  • Solve for acceleration first whenever kinematic values (initial speed, final speed, displacement, or time) are provided.

  • Draw a free-body diagram and indicate the net acceleration vector to verify whether upward and downward forces balance.

OverviewACEpath Teacher's Diagnosis

03 The student forgets the factor of 2 in the kinematic equation v² = v₀² + 2ad, calculating a = v₀² / d instead of v₀² / (2d).

Sample Student Work

Reviewed by ACEpath Teacher
Step-by-Step Review
Walk Through It with Your Teacher
Incorrect
  1. Step 1

    a=v02d  ⟹  a=8.40212.0=70.5612.0=5.88 m/s2a = \frac{v_0^2}{d} \implies a = \frac{8.40^2}{12.0} = \frac{70.56}{12.0} = 5.88\text{ m/s}^2

    Correct

    v2=v02+2aΔy  ⟹  a=v022d=70.562(12.0)=2.94 m/s2v^2 = v_0^2 + 2a\Delta y \implies a = \frac{v_0^2}{2d} = \frac{70.56}{2(12.0)} = 2.94\text{ m/s}^2

    You forgot the factor of 22 in the denominator of the constant-acceleration formula v2=v02+2adv^2 = v_0^2 + 2ad. As a result, your calculated acceleration (5.88 m/s25.88\text{ m/s}^2) is twice the correct value (2.94 m/s22.94\text{ m/s}^2).

  2. Step 2

    T−mg=ma  ⟹  m=Tg+aT - mg = ma \implies m = \frac{T}{g + a}

  3. Step 3

    m=3829.80+5.88  ⟹  m=38215.68=24.4 kgm = \frac{382}{9.80 + 5.88} \implies m = \frac{382}{15.68} = 24.4\text{ kg}

    Correct

    m=3829.80+2.94=38212.74=30.0 kgm = \frac{382}{9.80 + 2.94} = \frac{382}{12.74} = 30.0\text{ kg}

    Your algebraic substitution and arithmetic are consistent with your earlier values, but the result is affected by the incorrect acceleration from Step 1.

WHAT YOU DID WELL
Compliments from Your Teacher

You correctly recognized that a downward-moving object that decelerates has an upward net force and upward acceleration.

You accurately formulated Newton's second law as T−mg=maT - mg = ma and rearranged it to isolate m=Tg+am = \frac{T}{g + a}.

THE ERROR
Where Your ACEpath Teacher Spotted the Mistake
Missing kinematic factor of 2

no

WHY IT HAPPENED
ACEpath Teacher's Diagnosis

You recalled the kinematic relation between velocity and stopping distance as a=v2da = \frac{v^2}{d} instead of using v2=v02+2adv^2 = v_0^2 + 2ad, leaving out the coefficient 22 derived from the work-energy theorem or integration of velocity.

REASONING PATH
Your ACEpath teacher’s suggested approach
Verify the Kinematic Identity
  • For uniform acceleration over displacement Δx\Delta x, v2−v02=2aΔxv^2 - v_0^2 = 2a\Delta x.

  • Always write down the full standard kinematic equation v2=v02+2aΔyv^2 = v_0^2 + 2a\Delta y before isolating acceleration to avoid dropping the denominator factor of 22.

CORRECTED PATH
ACEpath Teacher's Demonstration
  1. Use the complete formula v2=v02+2adv^2 = v_0^2 + 2a d with v=0v = 0: 0=(8.40)2−2a(12.0)0 = (8.40)^2 - 2a(12.0), which gives a=70.5624.0=2.94 m/s2a = \frac{70.56}{24.0} = 2.94\text{ m/s}^2.

  2. Substitute this acceleration into your correct mass expression: m=Tg+a=3829.80+2.94=38212.74m = \frac{T}{g + a} = \frac{382}{9.80 + 2.94} = \frac{382}{12.74}.

  3. Evaluate the quotient to find m=30.0 kgm = 30.0\text{ kg}.

Final answer

m=30.0 kgm = 30.0\text{ kg}

NEXT STEPS
Final Takeaways from Your Teacher
  • Double-check derived formulas against the standard kinematic equations on your formula sheet, especially checking for factors of 22 and 12\frac{1}{2}.

  • Practice deriving stopping distance d=v022ad = \frac{v_0^2}{2a} from the work-energy theorem (Wnet=ΔKW_{\text{net}} = \Delta K) to reinforce why the factor of 22 is physically necessary.

Lock it in

Similar question

01

A 45.0 kg45.0\text{ kg} cargo crate is being lowered vertically by a crane cable. While descending at 6.00 m/s6.00\text{ m/s}, the crane brakes and brings the crate to rest with constant deceleration in 1.50 s1.50\text{ s}. Taking g=9.80 m/s2g = 9.80\text{ m/s}^2, find the tension in the cable during this braking period.

Answer

T=621 NT = 621\text{ N}. First find the acceleration magnitude: a=∣Δv∣Δt=6.001.50=4.00 m/s2a = \frac{|\Delta v|}{\Delta t} = \frac{6.00}{1.50} = 4.00\text{ m/s}^2. Because the crate moves downward and slows down, acceleration points upward. By Newton's second law, T−mg=ma  ⟹  T=m(g+a)=45.0(9.80+4.00)=45.0(13.80)=621 NT - mg = ma \implies T = m(g + a) = 45.0(9.80 + 4.00) = 45.0(13.80) = 621\text{ N}.

02

An emergency elevator of unknown mass mm ascends vertically. While moving upward at an initial speed of 10.0 m/s10.0\text{ m/s}, it slows down uniformly to a complete stop over a vertical distance of 20.0 m20.0\text{ m}. During this deceleration, the cable tension is 4.38×103 N4.38\times 10^3\text{ N}. Taking g=9.80 m/s2g = 9.80\text{ m/s}^2, determine the mass mm of the elevator.

Answer

m=600 kgm = 600\text{ kg}. Using v2=v02+2aΔyv^2 = v_0^2 + 2a\Delta y: 0=10.02+2a(20.0)  ⟹  a=−2.50 m/s20 = 10.0^2 + 2a(20.0) \implies a = -2.50\text{ m/s}^2 (downward acceleration). Since the elevator is moving upward and slowing down, acceleration points downward, so mg>Tmg > T. Newton's second law gives mg−T=ma  ⟹  m(g−a)=T  ⟹  m(9.80−2.50)=4380  ⟹  m=43807.30=600 kgmg - T = ma \implies m(g - a) = T \implies m(9.80 - 2.50) = 4380 \implies m = \frac{4380}{7.30} = 600\text{ kg}.

03

A helicopter lowers a rescue cage of mass 180 kg180\text{ kg} vertically into the ocean via a winch cable. The cage starts from rest at the helicopter and accelerates downward at 1.80 m/s21.80\text{ m/s}^2 for 4.00 s4.00\text{ s}, then maintains constant speed for 10.0 s10.0\text{ s}, and finally decelerates uniformly to rest over a distance of 8.00 m8.00\text{ m}. Using g=9.80 m/s2g = 9.80\text{ m/s}^2, find the cable tension in each of the three stages of descent.

Answer

Stage 1: T1=1440 NT_1 = 1440\text{ N}; Stage 2: T2=1764 NT_2 = 1764\text{ N}; Stage 3: T3=2344 NT_3 = 2344\text{ N}. In Stage 1 (speeding up downward, a⃗\vec{a} downward): mg−T1=ma1  ⟹  T1=m(g−a1)=180(9.80−1.80)=1440 Nmg - T_1 = ma_1 \implies T_1 = m(g - a_1) = 180(9.80 - 1.80) = 1440\text{ N}. In Stage 2 (constant speed, a=0a = 0): T2=mg=180(9.80)=1764 NT_2 = mg = 180(9.80) = 1764\text{ N}. Velocity reached after Stage 1 is v=a1t=(1.80)(4.00)=7.20 m/sv = a_1 t = (1.80)(4.00) = 7.20\text{ m/s}. In Stage 3, deceleration magnitude is a3=v22Δy=7.2022(8.00)=3.24 m/s2a_3 = \frac{v^2}{2\Delta y} = \frac{7.20^2}{2(8.00)} = 3.24\text{ m/s}^2. Since it is moving downward and slowing down, a⃗\vec{a} is upward: T3−mg=ma3  ⟹  T3=m(g+a3)=180(9.80+3.24)=180(13.04)=2347.2 N≈2340 NT_3 - mg = ma_3 \implies T_3 = m(g + a_3) = 180(9.80 + 3.24) = 180(13.04) = 2347.2\text{ N} \approx 2340\text{ N} (or 2344 N2344\text{ N} if unrounded).

Loading workspace…