Resources
An industrial refrigeration unit operates between an interior cold compartment at and an ambient outdoor exhaust at . The system must extract heat from the cold space at a rate of . Convert all temperatures to kelvins and find the theoretical minimum electrical input power in kilowatts required to operate this refrigerator at the Carnot thermodynamic limit.
Answer and steps
Final answer
Steps
Convert Temperatures to Kelvins
Thermodynamic equations for thermal cycles require absolute temperatures in kelvins ():
The temperature difference between the hot and cold reservoirs is:
Common Pitfall: Never use temperatures in Celsius directly inside Carnot efficiency or coefficient of performance formulas, as they are ratios based on the absolute Kelvin scale.
Convert Heat Extraction Rate to Kilowatts
Convert the cooling capacity from kilojoules per minute to kilojoules per second (kilowatts):
Determine the Carnot Coefficient of Performance ()
A refrigerator's coefficient of performance () measures the heat removed from the cold space per unit of work input. At the thermodynamic (Carnot) limit, the maximum theoretical coefficient of performance depends solely on the operating reservoir temperatures:
Substitute the absolute temperatures:
Calculate the Minimum Work Input Rate ()
By definition, the coefficient of performance relates cooling rate and input power:
Rearranging to solve for the minimum power input:
Thus, the theoretical minimum input power required is .
Typical errors
01 The student uses the heat pump coefficient of performance formula instead of the refrigerator formula, overestimating the COP and underestimating the required power.
Sample Student Work
Reviewed by ACEpath TeacherStep-by-Step Review
Walk Through It with Your Teacher- Step 1
- Step 2
- Step 3Correct
You used the coefficient of performance formula for a heat pump () rather than for a refrigerator ().
- Step 4Correct
Your power calculation method was set up correctly, but your numerical answer is smaller than the true minimum power because it relied on the overestimated COP from Step 3.
WHAT YOU DID WELL
Compliments from Your TeacherYou correctly converted all given temperatures from degrees Celsius to absolute kelvins.
You accurately converted the cooling capacity from kilojoules per minute into kilowatts.
You correctly related power input, cooling load, and the coefficient of performance.
THE ERROR
Where Your ACEpath Teacher Spotted the MistakeNo, this is an underlying conceptual confusion between cooling performance (refrigerator) and heating performance (heat pump).
WHY IT HAPPENED
ACEpath Teacher's DiagnosisYou selected the numerator instead of . A refrigerator's objective is heat removal from the cold space (), so its performance ratio is governed by . Using in the numerator applies to a heat pump, which overstates the cycle's cooling efficiency and underestimates the electrical power needed.
REASONING PATH
Your ACEpath teacher’s suggested approach- Identify the Desired Output
Check whether the system's purpose is cooling (desired heat is ) or heating (desired heat is ).
- Select the Corresponding Carnot COP
and
Put the cold reservoir temperature in the numerator whenever you analyze a refrigeration or air-conditioning cycle.
CORRECTED PATH
ACEpath Teacher's DemonstrationSubstitute the cold reservoir absolute temperature into the Carnot refrigerator COP formula: .
Divide the cooling load by the corrected COP: .
02 The student forgets to convert the heat extraction rate from kilojoules per minute to kilowatts, resulting in an input power that is sixty times too large.
Sample Student Work
Reviewed by ACEpath TeacherStep-by-Step Review
Walk Through It with Your Teacher- Step 1
- Step 2
- Step 3Correct
You substituted directly without dividing by . This gave an answer in kilojoules per minute rather than kilowatts (kilojoules per second).
WHAT YOU DID WELL
Compliments from Your TeacherYou correctly shifted both Celsius temperatures to the absolute Kelvin scale using the standard offset.
You selected the correct Carnot refrigerator formula and computed its numerical value accurately.
THE ERROR
Where Your ACEpath Teacher Spotted the MistakeYou substituted the heat extraction rate in directly into the power equation while labeling the final numerical result as .
WHY IT HAPPENED
ACEpath Teacher's DiagnosisYou treated kilowatt () as if it matched any rate of energy transfer without checking whether the time unit in the numerator was seconds rather than minutes.
REASONING PATH
Your ACEpath teacher’s suggested approach- Define Power Base Units
Whenever a thermal transfer rate is given in or , convert the time dimension to seconds before calculating power in watts or kilowatts.
- Unit Tracking in Quotients
Divide by first so that .
CORRECTED PATH
ACEpath Teacher's DemonstrationConvert the heat extraction rate into kilowatts: .
Apply the power definition using the Carnot COP: .
03 The student applies the Carnot heat engine thermal efficiency formula instead of the refrigerator coefficient of performance, multiplying heat rate by efficiency.
Sample Student Work
Reviewed by ACEpath TeacherStep-by-Step Review
Walk Through It with Your Teacher- Step 1
- Step 2
- Step 3Correct
You applied the thermal efficiency formula , which governs a heat engine producing work from heat. A refrigeration cycle removes heat by consuming work, so its thermodynamic limit is described by the coefficient of performance .
- Step 4Correct
Because you evaluated heat engine efficiency rather than refrigerator COP, you multiplied the cooling rate by instead of dividing it by .
WHAT YOU DID WELL
Compliments from Your TeacherYou correctly converted Celsius temperatures to absolute temperatures in kelvins.
You accurately converted the cooling capacity rate from kilojoules per minute to kilowatts.
THE ERROR
Where Your ACEpath Teacher Spotted the MistakeNo algebraic or conversion slip occurred; your units and arithmetic were executed carefully.
WHY IT HAPPENED
ACEpath Teacher's DiagnosisYou selected the Carnot efficiency formula for a power-producing heat engine () rather than the coefficient of performance for a reversed heat cycle (). A refrigerator does not generate work with efficiency ; it pumps heat from cold to hot by consuming work , meaning often exceeds .
REASONING PATH
Your ACEpath teacher’s suggested approach- Device Purpose: Engine vs. Refrigerator
A heat engine converts heat input from a hot reservoir into work (), whereas a refrigerator transfers heat from a cold reservoir using work input ().
Identify whether the device extracts work (heat engine) or removes heat from a low-temperature space (refrigerator/heat pump) before choosing a performance metric.
- Carnot Limit Formulation
For a reversible refrigerator operating between and , .
Set up when computing minimum power input, then compute .
CORRECTED PATH
ACEpath Teacher's DemonstrationCalculate the Carnot coefficient of performance: .
Relate cooling power to input electrical power: .
Lock it in
What is the fundamental difference between the numerator of and ?
has in the numerator because the goal is removing heat from the cold space, whereas has because the goal is supplying heat to the warm space.
Similar question
A laboratory freezer maintains an interior temperature of in a room at . Find the maximum theoretical coefficient of performance () of this refrigeration cycle.
Answer
Key steps:
- Convert to kelvins: , .
- Compute temperature span: .
- Calculate refrigerator COP: .
An air conditioner operating reversibly removes heat from an indoor room at and exhausts it outdoors at . If the cooling rate required is , calculate the minimum electrical power input in kilowatts.
Answer
Key steps:
- Convert temperatures: , , .
- Determine Carnot cooling COP: .
- Calculate minimum power: .
A dual-mode thermal system operates between an underground thermal reservoir at and a building interior at . Compute the theoretical Carnot COP when operating in cooling mode (refrigerator cooling the underground space) versus heating mode (heat pump warming the building), and verify their algebraic relationship.
Answer
, ; their difference is exactly .
Key steps:
- Convert temperatures: , , .
- Cooling COP: .
- Heating COP: .
- Verification: .