Resources
In an optical bench laboratory experiment, an illuminated crosshairs target (the object) and a viewing screen are fixed at the opposite ends of a precision optical bench track separated by a total distance . A thin biconvex lens mounted on a sliding carriage is translated between them. The experimenter locates exactly two distinct carriage positions, separated by a displacement distance , where a sharply focused real image forms on the screen (the Bessel displacement method). Using the analytical Bessel relation , calculate the focal length of the lens, and determine the ratio of the image height of the magnified image to that of the diminished image, .
Answer and steps
Final answer
,
Steps
Calculate the Focal Length
In Bessel's displacement method, an illuminated object and a screen are placed at a fixed separation . For a converging lens of focal length , there exist two distinct positions of the lens that form a sharp, real image on the screen. If the separation between these two lens positions is , the focal length is given by:
Substitute the given values, and :
Determine Object and Image Distances for Both Positions
By the reversibility of light and the symmetry of the thin lens equation , the object distance and image distance interchange between the two sharp image configurations:
- For the first position (closer to the object, forming a magnified image):
- For the second position (closer to the screen, forming a diminished image):
Calculate the Magnification Ratio
The lateral magnification magnitude is , so the image height is :
- For the magnified image:
- For the diminished image:
Taking the ratio of the two image heights:
Common Pitfall: Avoid calculating the image ratio simply as the ratio of displacements . The image height is proportional to linear magnification , meaning the ratio of the two heights depends quadratically on the distance ratio: .
Typical errors
01 The student confuses the magnification of the magnified image with the ratio of the two image heights, reporting m₁ instead of m₁/m₂.
Sample Student Work
Reviewed by ACEpath TeacherStep-by-Step Review
Walk Through It with Your Teacher- Step 1
- Step 2
- Step 3Correct
You calculated the linear magnification of the magnified image relative to the object (), rather than the ratio between the heights of the two images (). Because the second image has magnification , the ratio of their heights is .
WHAT YOU DID WELL
Compliments from Your TeacherYou correctly substituted the track distance and lens displacement into Bessel's formula to find the focal length.
You correctly calculated the object and image distances for the first lens position using the displacement geometry.
THE ERROR
Where Your ACEpath Teacher Spotted the Mistakeno
WHY IT HAPPENED
ACEpath Teacher's DiagnosisYou treated the ratio of the two image heights as the ratio of image distance to object distance for a single lens position (), overlooking that the denominator is the diminished image height rather than the original object height .
REASONING PATH
Your ACEpath teacher’s suggested approach- Distinguish single magnification from image-to-image ratio
For an object of height , the individual image heights are and . Therefore, .
Always write down the heights in terms of both magnifications before simplifying, ensuring that the object height cancels out properly.
- Use conjugate symmetry in Bessel's method
Because the two lens positions interchange object and image distances, and .
Express the ratio of image heights as .
CORRECTED PATH
ACEpath Teacher's DemonstrationIdentify the magnification of the first (magnified) image: .
Identify the magnification of the second (diminished) image by conjugate symmetry: .
Compute the ratio of the two image heights: .
02 The student forgets the factor of 4 in the denominator of the Bessel formula, resulting in a focal length four times too large.
Sample Student Work
Reviewed by ACEpath TeacherStep-by-Step Review
Walk Through It with Your Teacher- Step 1
f = f = f = = 84.0
Correctf = = = 21.0
You omitted the factor of in the denominator of Bessel's displacement formula. The relation is , which yields . Notice also that a real image requires ; a focal length of with would make real image formation impossible.
- Step 2
u_1 = (100.0 - 40.0)/2 = 30.0 v_1 = 70.0 u_2 = 70.0,, v_2 = 30.0
- Step 3
m_1 = 70.0/30.0 = ,, m_2 = = h_{i,1}/h_{i,2} = =
WHAT YOU DID WELL
Compliments from Your TeacherYou correctly used the displacement relation to find the conjugate object and image distances and .
You correctly identified the two magnifications as reciprocal values using optical reversibility.
You calculated the ratio of image heights accurately.
THE ERROR
Where Your ACEpath Teacher Spotted the MistakeYou wrote instead of , forgetting the factor of in the denominator.
WHY IT HAPPENED
ACEpath Teacher's DiagnosisIn Bessel's method, the two lens positions satisfy and . Substituting these into gives numerator and denominator , leading directly to . Omission of the factor 4 also violates the physical condition necessary for real image formation on a screen.
REASONING PATH
Your ACEpath teacher’s suggested approach- Bessel Formula Structure
For fixed object-screen distance and displacement , the focal length is .
Always verify that the denominator has , which arises from .
- Physical Reality Sanity Check
A thin converging lens can project a real image onto a screen only if the object-screen separation satisfies .
Check if your computed focal length satisfies . A value of is greater than , which immediately flags an error.
CORRECTED PATH
ACEpath Teacher's DemonstrationWrite the standard Bessel relation: .
Substitute and : .
Divide: .
,
03 The student inverts the requested ratio and calculates the ratio of the diminished image height to the magnified image height.
Sample Student Work
Reviewed by ACEpath TeacherStep-by-Step Review
Walk Through It with Your Teacher- Step 1
- Step 2
- Step 3
- Step 4Correct
Because image height is directly proportional to magnification (), the ratio of the first (magnified) image height to the second (diminished) image height must be , not .
WHAT YOU DID WELL
Compliments from Your TeacherYou correctly substituted the track separation and displacement into Bessel's formula to find the focal length.
You correctly identified that the object and image distances swap between the two sharp image configurations.
You accurately calculated the individual lateral magnifications and .
THE ERROR
Where Your ACEpath Teacher Spotted the MistakeYou equated the ratio of image heights to instead of .
WHY IT HAPPENED
ACEpath Teacher's DiagnosisYou accidentally applied an inverse-proportion relationship instead of a direct-proportion relationship between image height and magnification, or you mismatched the subscripts between image heights and magnifications.
REASONING PATH
Your ACEpath teacher’s suggested approach- Direct Proportion Check
Since and the object height is fixed, image height is directly proportional to magnification: .
Always verify that the indices align directly on both sides of the ratio ( on top, on the bottom).
- Physical Sanity Check
The ratio of a magnified image () to a diminished image () must always be strictly greater than .
Check your final numerical ratio: if it is less than , you have inverted the intended comparison.
CORRECTED PATH
ACEpath Teacher's DemonstrationExpress the ratio of image heights directly in terms of magnifications: .
Substitute the calculated values and : .
Lock it in
In Bessel's displacement method, what is the mathematical relationship between the magnifications and at the two conjugate sharp-focus lens positions?
(or ). By the reversibility of light, the object and image distances interchange between the two positions: and .
Similar question
In a Bessel displacement setup, the distance between the object and the screen is . A converging lens produces two sharp images when placed at two positions separated by . Find the ratio of the larger image height to the smaller image height, .
Answer
. First find and . The magnification of the larger image is . By conjugate symmetry, , so .
A converging lens forms two sharp images of an object of unknown height on a screen placed away. The height of the magnified image is and the height of the diminished image is . Determine the object height and the displacement distance between the two lens positions.
Answer
. The object height is the geometric mean . The magnifications are and . Since , we solve .
In an optical bench experiment with fixed object-to-screen distance , a thin lens of focal length is moved between the two focus positions. Calculate the displacement between the two positions, and determine the percentage difference between the magnification ratio and the single magnification relative to the true ratio.
Answer
, true ratio , and the single magnification underestimates the true ratio by . Using , we have . The conjugate distances are and , giving . The true ratio is . The percentage difference is .