Resources
Water at (density , dynamic viscosity ) flows through a horizontal tube of inner diameter . To prevent flow instability and audible turbulence, the flow must remain strictly laminar, defined by the critical threshold Reynolds number . Determine the maximum allowable flow speed and the corresponding maximum volumetric flow rate through the tube at this laminar boundary.
Answer and steps
Final answer
, (or )
Steps
Step 1: Identify Given Values and Standard Units
Extract the fluid and pipe parameters, converting all units to standard SI units:
- Fluid density:
- Dynamic viscosity:
- Pipe inner diameter:
- Critical Reynolds number:
Step 2: Calculate the Maximum Flow Speed ()
The Reynolds number for flow through a circular pipe is given by:
To ensure the flow remains laminar, the maximum speed corresponds to the critical threshold :
Substitute the values:
Step 3: Calculate the Maximum Volumetric Flow Rate ()
The cross-sectional area of the circular tube is:
The volumetric flow rate is the product of the cross-sectional area and the average velocity:
Substitute and the unrounded value of :
To express this in liters per second ():
Common Pitfall: Always convert the diameter from centimeters to meters before calculating the area or substituting into the Reynolds number formula to prevent errors by powers of ten.
Typical errors
01 The student forgets to convert the tube diameter from centimeters to meters, resulting in a flow speed and volumetric flow rate that are off by two orders of magnitude.
Sample Student Work
Reviewed by ACEpath TeacherStep-by-Step Review
Walk Through It with Your Teacher- Step 1Correct
You rearranged the formula correctly, but you substituted the diameter as instead of converting into SI base units (). This made your flow speed 100 times smaller than the true value.
- Step 2
- Step 3Correct
Your relationship and your conversion of area from to are correct, but your final answer inherits the incorrect velocity value from Step 1.
WHAT YOU DID WELL
Compliments from Your TeacherYou correctly solved the Reynolds number definition for the velocity variable.
You correctly calculated the circular tube cross-sectional area.
You converted to correctly in the flow rate calculation.
THE ERROR
Where Your ACEpath Teacher Spotted the MistakeYou substituted the diameter directly as without converting centimeters to meters.
WHY IT HAPPENED
ACEpath Teacher's DiagnosisFailing to convert all given input dimensions to base SI units () before entering them into formulas containing other SI quantities (such as density in and viscosity in ).
REASONING PATH
Your ACEpath teacher’s suggested approach- Check SI Base Units
Every linear dimension must be in meters () when paired with standard SI fluid constants (, ).
Write down right at the beginning before plugging values into algebraic equations.
CORRECTED PATH
ACEpath Teacher's DemonstrationConvert pipe diameter to meters: .
Recalculate laminar limit speed: .
Compute maximum volumetric flow rate: .
, (or )
02 The student confuses the tube diameter with the radius when calculating the cross-sectional area, using D instead of D/2 in πr².
Sample Student Work
Reviewed by ACEpath TeacherStep-by-Step Review
Walk Through It with Your Teacher- Step 1
- Step 2Correct
You used the diameter directly in . The area of a circle is .
- Step 3Correct
You correctly multiplied your calculated area by the flow velocity, but the result is 4 times too large due to the error in the area formula.
WHAT YOU DID WELL
Compliments from Your TeacherYou converted the tube diameter from centimeters to meters accurately.
You correctly solved for from the Reynolds number definition.
You correctly recognized that volumetric flow rate is the product of cross-sectional area and average velocity.
THE ERROR
Where Your ACEpath Teacher Spotted the MistakeYou substituted the diameter into the formula without dividing by , effectively using .
WHY IT HAPPENED
ACEpath Teacher's DiagnosisConfusing diameter and radius in the circular area formula , leading to an area that is times too large.
REASONING PATH
Your ACEpath teacher’s suggested approach- Circular Cross-Section Area
Area of a circle expressed with diameter is , or first convert diameter to radius and use .
Whenever given diameter , either explicitly compute first or write before plugging in numbers.
CORRECTED PATH
ACEpath Teacher's Demonstration, (or )
03 The student inverts the Reynolds number formula when solving for velocity, writing v_max = (Re · ρ · D) / μ instead of isolating v correctly.
Sample Student Work
Reviewed by ACEpath TeacherStep-by-Step Review
Walk Through It with Your Teacher- Step 1
- Step 2Correct
Starting from , isolating requires multiplying both sides by and dividing by , giving .
- Step 3
- Step 4Correct
You used the correct relationship , but your answer inherited the error from the incorrect velocity in Step 2.
WHAT YOU DID WELL
Compliments from Your TeacherYou correctly converted the pipe diameter from centimeters to meters.
You correctly determined the tube's cross-sectional area from the radius.
You identified and applied the correct flow rate formula .
THE ERROR
Where Your ACEpath Teacher Spotted the MistakeYou multiplied by instead of dividing by when solving for .
WHY IT HAPPENED
ACEpath Teacher's DiagnosisYou misplaced numerator and denominator terms during variable isolation, confusing the inverse relationship between velocity and fluid density/diameter at a fixed Reynolds number.
REASONING PATH
Your ACEpath teacher’s suggested approach- Isolate a Factor from a Fraction
For an equation , isolating yields .
Always perform isolation in two clear steps: first multiply across by the denominator, then divide by the remaining factors in the numerator.
- Physical Sanity Check
Laminar water flow in household-scale plumbing typically has speeds between and .
Check whether a calculated speed of nearly (one-tenth the speed of light) is physically plausible for water in a pipe.
CORRECTED PATH
ACEpath Teacher's DemonstrationIsolate from :
Substitute the values:
Calculate the flow rate:
, (or )
Lock it in
Why must a pipe diameter in centimeters be converted to meters before calculating the Reynolds number ?
Density and viscosity are defined in SI base units ( and ). Leaving in creates a unit mismatch and distorts results by a factor of 100.
Similar question
Water (, ) flows through a pipe of diameter . Find the maximum flow velocity for laminar flow ().
Answer
. Convert , then compute .
For the same pipe (), calculate the maximum volumetric flow rate in both and at the laminar threshold .
Answer
. Compute , then .
Engine oil (, dynamic viscosity ) flows through a horizontal tube of inner diameter . If the flow is at the critical limit , find the maximum allowable volumetric flow rate in .
Answer
. Convert diameter: . Calculate velocity: . Calculate area: . Thus .