Resources
A compact medical solenoid designed for localized magnetic therapies is wound with . An engineering technician measures the internal axial magnetic field to be (gauss). (a) Convert the winding density to turns per meter () and the magnetic field to teslas (). (b) Calculate the required operating current in amperes. (c) A flat circular exploration probe with an area of is inserted inside the central bore of the solenoid. Calculate the magnetic flux through the probe in webers () and maxwells () when the probe's surface normal is tilted at an angle of relative to the central field lines.
Answer and steps
Final answer
(a) , ; (b) ; (c)
Steps
Part (a): Unit Conversions
- Winding density ():
The number of turns per centimeter is converted to SI units (turns per meter) using the conversion factor : - Magnetic field ():
Gauss () relates to tesla () by the relation :
Part (b): Operating Current ()
The magnetic field inside an ideal, tightly wound long solenoid is uniform along its central axis and given by Ampère's Law:
where is the permeability of free space.
Rearranging to solve for the current :
Substitute the values:
Part (c): Magnetic Flux ()
Magnetic flux through a flat surface of area in a uniform magnetic field is defined as:
where:
- is the angle between the probe's surface normal vector and the magnetic field
Common Pitfall: Always verify whether the given angle is measured between the field and the surface normal or the surface plane. Here, the angle is explicitly between the surface normal and the field lines, so applies directly.
- In Webers ():
- In Maxwells ():
Since :
Typical errors
01 The student forgets to square the linear conversion factor when converting the probe area from cm² to m², using 10⁻² instead of 10⁻⁴.
Sample Student Work
Reviewed by ACEpath TeacherStep-by-Step Review
Walk Through It with Your Teacher- Step 1
⟹
- Step 2
⟹
- Step 3Correct
You used the linear conversion prefix rather than squaring it for area. Because , .
- Step 4
⟹
Correct⟹
Your formula and angle setup were completely correct, but the calculated flux values were off by a factor of due to the area conversion in Step 3.
WHAT YOU DID WELL
Compliments from Your TeacherYou converted both linear turn density and gauss to SI units accurately in part (a).
You used the correct solenoid field equation and solved for the operating current precisely.
You correctly used the surface normal angle directly in and knew the conversion factor between webers and maxwells ().
THE ERROR
Where Your ACEpath Teacher Spotted the MistakeYou wrote instead of squaring the metric prefix to obtain .
WHY IT HAPPENED
ACEpath Teacher's DiagnosisApplying linear SI prefixes directly to derived geometric units (area or volume) without raising the conversion factor to the corresponding power ( for area, for volume).
REASONING PATH
Your ACEpath teacher’s suggested approach- Square the prefix for area
Always write out parentheses around both the value and the unit prefix before squaring: .
- Reasonableness check on area
A sheet of paper is roughly ; an area of is a square.
Check whether your calculated area matches physical scale: a small probe of cannot be a substantial fraction of a square meter.
CORRECTED PATH
ACEpath Teacher's DemonstrationConvert area properly: .
Substitute into the flux formula: .
Convert to maxwells: .
(a) , ; (b) ; (c)
02 The student uses the sine of the angle rather than the cosine when calculating magnetic flux, confusing the surface normal angle with the plane angle.
Sample Student Work
Reviewed by ACEpath TeacherStep-by-Step Review
Walk Through It with Your Teacher- Step 1
⟹
- Step 2
⟹
- Step 3
⟹
CorrectYou used instead of . Magnetic flux is defined by the dot product , where is the angle between the magnetic field and the surface normal.
- Step 4Correct
Your unit conversion factor from webers to maxwells () was correct, but the final value carried over the error from using sine.
WHAT YOU DID WELL
Compliments from Your TeacherYou correctly converted the solenoid winding density to and the magnetic field to teslas.
You set up and evaluated the magnetic field inside an ideal solenoid to find the current .
You converted the probe area accurately to and used the correct factor .
THE ERROR
Where Your ACEpath Teacher Spotted the Mistakeno
WHY IT HAPPENED
ACEpath Teacher's DiagnosisYou confused the angle between the magnetic field and the surface normal with the angle between the magnetic field and the plane of the loop. The dot product definition of flux directly takes when is measured with respect to the normal vector.
REASONING PATH
Your ACEpath teacher’s suggested approach- Identifying the Reference Axis for $\theta$
In , must be measured from the surface normal to .
Check whether the problem specifies the angle relative to the 'surface normal' (use ) or the 'plane of the surface' (use or ).
CORRECTED PATH
ACEpath Teacher's DemonstrationRecognize that is measured directly from the surface normal to , so .
Calculate flux in webers: .
Convert to maxwells using : .
(a) , ; (b) ; (c)
03 The student divides by 100 instead of multiplying by 100 when converting turns/cm to turns/m, resulting in an incorrect turns per meter value of 0.45 turns/m.
Sample Student Work
Reviewed by ACEpath TeacherStep-by-Step Review
Walk Through It with Your Teacher- Step 1Correct
Centimeters are in the denominator of . Since , there are times more turns in one full meter than in one centimeter, so you need to multiply by rather than divide.
- Step 2
- Step 3Correct
Your algebraic rearrangement and substitution structure were completely correct, but the calculation inherited your incorrect winding density from Step 1.
- Step 4
WHAT YOU DID WELL
Compliments from Your TeacherYou correctly converted gauss to teslas using the standard factor .
You correctly applied Ampère's law for a long solenoid, , and rearranged it to isolate current .
You properly converted square centimeters to square meters and evaluated the magnetic flux through the tilted probe in both SI and CGS units.
THE ERROR
Where Your ACEpath Teacher Spotted the MistakeDividing by when converting a unit whose length dimension is in the denominator ( to ).
WHY IT HAPPENED
ACEpath Teacher's DiagnosisYou treated the centimeter-to-meter conversion as a standard direct length conversion (dividing by ) rather than recognizing that centimeters appear in the denominator of linear density ().
REASONING PATH
Your ACEpath teacher’s suggested approach- Denominator Unit Cancellation
When a prefix is in the denominator, the conversion factor must place that unit in the numerator to cancel: .
Write unit conversion factors with explicit fraction bars and cancel units explicitly before multiplying or dividing numerical values.
- Physical Sanity Check for Solenoid Density
A meter is times longer than a centimeter, so a tight coil must pack times more wire loops in a meter than in a centimeter.
Ask yourself whether the physical quantity should get larger or smaller over a longer distance before finalizing your arithmetic.
CORRECTED PATH
ACEpath Teacher's DemonstrationSubstitute the correct winding density into .
Evaluate the denominator: .
Compute the current: .
(a) , ; (b) ; (c)
Lock it in
How do you convert an area given in square centimeters () into square meters ()?
Multiply by (or divide by ). Since , squaring both sides gives .
Similar question
A square sensor with side length is placed perpendicular to a uniform magnetic field of . Calculate the magnetic flux through the sensor in webers.
Answer
. Key steps: (or ). With , .
A solenoid of radius has an axial internal field of . A small circular loop of area sits inside the solenoid with its flat face tilted at an angle of relative to the solenoid's axis (meaning the loop's surface normal is tilted at to the field lines). Find the magnetic flux through the loop in both webers () and maxwells ().
Answer
. Key steps: ; ; ; in maxwells, .
A compact magnetic pickup coil has , each of cross-sectional area . It is positioned inside a magnetic field that collapses from to zero in . If the normal to the coil faces is aligned parallel to the field, calculate the magnitude of the average induced electromotive force (EMF) across the coil.
Answer
. Key steps: Area per turn ; total flux linkage change ; by Faraday's law, .