Resources

A wooden crate of mass m=24.0 kgm = 24.0\text{ kg} rests on a flat horizontal warehouse floor. The coefficient of static friction between the crate and the floor is μs=0.450\mu_s = 0.450, and the coefficient of kinetic friction is μk=0.320\mu_k = 0.320. A worker pushes horizontally on the crate with a constant applied force of F=85.0 NF = 85.0\text{ N}. Using g=9.80 m/s2g = 9.80\text{ m/s}^2, determine the state of motion of the crate (at rest or in motion) and the exact magnitude of the friction force ff exerted by the floor on the crate.

Answer and steps

Final answer

The crate remains at rest, and the magnitude of the static friction force is fs=85.0 Nf_s = 85.0\text{ N}.

Steps

01

Calculate the Normal Force

The crate rests on a flat horizontal floor with no vertical motion, so the vertical forces are balanced:

FN=mgF_N = mg

Substitute the given values for mass and gravitational acceleration:

FN=(24.0 kg)(9.80 m/s2)=235.2 NF_N = (24.0\text{ kg})(9.80\text{ m/s}^2) = 235.2\text{ N}


02

Determine the Maximum Static Friction Force

Static friction prevents an object from sliding until the applied force exceeds the maximum static friction threshold, fs,max⁡f_{s,\max}:

fs,max⁡=μsFNf_{s,\max} = \mu_s F_N

Substitute the static friction coefficient and normal force:

fs,max⁡=(0.450)(235.2 N)=105.84 Nf_{s,\max} = (0.450)(235.2\text{ N}) = 105.84\text{ N}


03

Determine the State of Motion

Compare the applied horizontal force F=85.0 NF = 85.0\text{ N} to the maximum static friction:

F=85.0 N<105.84 N=fs,max⁡F = 85.0\text{ N} < 105.84\text{ N} = f_{s,\max}

Because the applied force does not exceed the maximum threshold required to initiate motion, the crate cannot overcome static friction and remains at rest.


04

Find the Actual Friction Force

According to Newton's first law, an object remaining at rest in equilibrium must have a net force of zero along the horizontal direction:

ΣFx=F−fs=0  ⟹  fs=F\Sigma F_x = F - f_s = 0 \implies f_s = F

Therefore:

fs=85.0 Nf_s = 85.0\text{ N}

Common Pitfall: A frequent mistake is using fs=μsFN=105.84 Nf_s = \mu_s F_N = 105.84\text{ N} as the actual friction force. The formula μsFN\mu_s F_N only determines the upper limit (threshold) of static friction. Up to that threshold, static friction is a self-adjusting force that matches the applied pushing force exactly to maintain equilibrium.

Typical errors

OverviewACEpath Teacher's Diagnosis

01 The student assumes that the static friction force always equals its maximum value μs * N even when the crate remains at rest.

Sample Student Work

Reviewed by ACEpath Teacher
Step-by-Step Review
Walk Through It with Your Teacher
Partially correct
  1. Step 1

    N=m⋅g=24.0⋅9.80=235.2 NN = m \cdot g = 24.0 \cdot 9.80 = 235.2\text{ N}

  2. Step 2

    fs,max⁡=0.450⋅235.2=105.84 N  ⟹  F=85.0 N<105.84 N  ⟹  crate remains at restf_{s,\max} = 0.450 \cdot 235.2 = 105.84\text{ N} \implies F = 85.0\text{ N} < 105.84\text{ N} \implies \text{crate remains at rest}

  3. Step 3

    f=μs⋅N=0.450⋅235.2=105.84 N  ⟹  f=105.84 Nf = \mu_s \cdot N = 0.450 \cdot 235.2 = 105.84\text{ N} \implies f = 105.84\text{ N}

    Correct

    ΣFx=0  ⟹  fs=F=85.0 N\Sigma F_x = 0 \implies f_s = F = 85.0\text{ N}

    The formula fs,max⁡=μsFNf_{s,\max} = \mu_s F_N gives only the upper limit of static friction. Because the crate is stationary, static friction self-adjusts to match the applied horizontal force: fs=F=85.0 Nf_s = F = 85.0\text{ N}.

WHAT YOU DID WELL
Compliments from Your Teacher

You correctly calculated the normal force acting on the crate.

You accurately computed the maximum possible static friction force.

You correctly concluded that the crate remains at rest because the applied force does not exceed the static friction threshold.

THE ERROR
Where Your ACEpath Teacher Spotted the Mistake
Static friction formula confusion

no

WHY IT HAPPENED
ACEpath Teacher's Diagnosis

You treated the maximum static friction formula fs,max⁡=μsNf_{s,\max} = \mu_s N as the actual static friction force, overlooking that static friction is an adjustable force governed by equilibrium (fs≤μsNf_s \le \mu_s N).

REASONING PATH
Your ACEpath teacher’s suggested approach
Nature of Static Friction
  • Static friction satisfies the inequality 0≤fs≤μsFN0 \le f_s \le \mu_s F_N. It only reaches μsFN\mu_s F_N when an object is on the verge of slipping.

  • When an object is at rest and not on the verge of sliding, use Newton's first law (ΣFx=0\Sigma F_x = 0) to set fs=Fappliedf_s = F_{\text{applied}}.

CORRECTED PATH
ACEpath Teacher's Demonstration
  1. Apply Newton's first law along the horizontal axis for an object in static equilibrium: ΣFx=F−fs=0\Sigma F_x = F - f_s = 0.

  2. Solve for the static friction force: fs=F=85.0 Nf_s = F = 85.0\text{ N}.

Final answer

The crate remains at rest, and the magnitude of the friction force is fs=85.0 Nf_s = 85.0\text{ N}.

NEXT STEPS
Final Takeaways from Your Teacher
  • Review the difference between the actual static friction fsf_s and the impending motion limit fs,max⁡f_{s,\max}.

  • Practice identifying when to use ΣF=0\Sigma F = 0 versus the empirical limit formula μsFN\mu_s F_N.

OverviewACEpath Teacher's Diagnosis

02 The student assumes any applied force causes motion and calculates kinetic friction using μk * N.

Sample Student Work

Reviewed by ACEpath Teacher
Step-by-Step Review
Walk Through It with Your Teacher
Incorrect
  1. Step 1

    N=m∗g=24.0∗9.80=235.2 NN = m * g = 24.0 * 9.80 = 235.2\text{ N}

  2. Step 2

    Crate is in motion

    Correct

    fs,max⁡=μsFN=(0.450)(235.2 N)=105.84 Nf_{s,\max} = \mu_s F_N = (0.450)(235.2\text{ N}) = 105.84\text{ N}. Since F=85.0 N<fs,max⁡F = 85.0\text{ N} < f_{s,\max}, the crate remains at rest.

    An object initially at rest does not move unless the horizontal applied force exceeds the maximum static friction force (fs,max⁡=μsFNf_{s,\max} = \mu_s F_N). Here, 85.0 N<105.84 N85.0\text{ N} < 105.84\text{ N}, so static friction prevents the crate from moving.

  3. Step 3

    fk=μk∗N=0.320∗235.2=75.264 N  ⟹  f=75.264 Nf_k = \mu_k * N = 0.320 * 235.2 = 75.264\text{ N} \implies f = 75.264\text{ N}

    Correct

    ΣFx=F−fs=0  ⟹  fs=F=85.0 N\Sigma F_x = F - f_s = 0 \implies f_s = F = 85.0\text{ N}

    Because the crate remains stationary, static friction acts on it rather than kinetic friction. By Newton's first law, static friction matches the applied horizontal force exactly, giving f=85.0 Nf = 85.0\text{ N}.

WHAT YOU DID WELL
Compliments from Your Teacher

You correctly calculated the normal force using FN=mgF_N = mg.

THE ERROR
Where Your ACEpath Teacher Spotted the Mistake
Assumed motion without checking static friction threshold

You jumped straight to kinetic friction without testing whether the applied force could overcome static friction.

WHY IT HAPPENED
ACEpath Teacher's Diagnosis

You treated any nonzero applied force as sufficient to cause motion, overlooking the role of static friction as a threshold barrier that must be exceeded before sliding can begin.

REASONING PATH
Your ACEpath teacher’s suggested approach
Compute the static friction threshold
  • Before assuming sliding, calculate the maximum possible static friction: fs,max⁡=μsFNf_{s,\max} = \mu_s F_N.

  • Multiply μs\mu_s by the normal force to find the threshold force needed to initiate motion.

Compare applied force to threshold
  • If Fapplied≤fs,max⁡F_{\text{applied}} \le f_{s,\max}, the object remains at rest and fs=Fappliedf_s = F_{\text{applied}}. If Fapplied>fs,max⁡F_{\text{applied}} > f_{s,\max}, it slides and fk=μkFNf_k = \mu_k F_N.

  • Check whether 85.0 N85.0\text{ N} is greater than 105.84 N105.84\text{ N} before selecting a friction formula.

CORRECTED PATH
ACEpath Teacher's Demonstration
  1. Calculate maximum static friction: fs,max⁡=μsFN=0.450×235.2 N=105.84 Nf_{s,\max} = \mu_s F_N = 0.450 \times 235.2\text{ N} = 105.84\text{ N}.

  2. Compare applied force to maximum static friction: F=85.0 N<105.84 NF = 85.0\text{ N} < 105.84\text{ N}, so the crate remains at rest.

  3. Apply horizontal equilibrium for an object at rest: ΣFx=F−fs=0  ⟹  fs=85.0 N\Sigma F_x = F - f_s = 0 \implies f_s = 85.0\text{ N}.

Final answer

The crate remains at rest, and the friction force is f=85.0 Nf = 85.0\text{ N}.

NEXT STEPS
Final Takeaways from Your Teacher
  • Always calculate fs,max⁡=μsFNf_{s,\max} = \mu_s F_N first whenever an object starts from rest.

  • Remember that static friction is self-adjusting: when at rest, fsf_s equals the applied parallel force, not μsFN\mu_s F_N.

OverviewACEpath Teacher's Diagnosis

03 The student compares the applied force directly to the static friction coefficient μs instead of the maximum static friction force fs,max, falsely concluding the crate moves.

Sample Student Work

Reviewed by ACEpath Teacher
Step-by-Step Review
Walk Through It with Your Teacher
Incorrect
  1. Step 1

    F=85.0 N>0.450F = 85.0\text{ N} > 0.450, so crate is in motion

    Correct

    fs,max⁡=μsN=(0.450)(235.2 N)=105.84 N  ⟹  F=85.0 N<fs,max⁡f_{s,\max} = \mu_s N = (0.450)(235.2\text{ N}) = 105.84\text{ N} \implies F = 85.0\text{ N} < f_{s,\max}, so crate remains at rest

    You compared a force (85.0 N85.0\text{ N}) directly to a dimensionless coefficient (μs=0.450\mu_s = 0.450). To decide whether an object begins to slide, compare the applied horizontal force to the maximum static friction threshold, fs,max⁡=μsNf_{s,\max} = \mu_s N.

  2. Step 2

    N=24.0∗9.80=235.2 NN = 24.0 * 9.80 = 235.2\text{ N}

  3. Step 3

    f=μk∗N=0.320∗235.2=75.264 Nf = \mu_k * N = 0.320 * 235.2 = 75.264\text{ N}

    Correct

    ΣFx=0  ⟹  fs=F=85.0 N\Sigma F_x = 0 \implies f_s = F = 85.0\text{ N}

    Because the crate does not move, kinetic friction does not act. Instead, static friction self-adjusts to balance the applied force, giving fs=85.0 Nf_s = 85.0\text{ N}.

WHAT YOU DID WELL
Compliments from Your Teacher

You correctly calculated the magnitude of the normal force as N=235.2 NN = 235.2\text{ N}.

You correctly recalled the formula for kinetic friction as fk=μkNf_k = \mu_k N.

THE ERROR
Where Your ACEpath Teacher Spotted the Mistake
dimensional mismatch / comparing force to coefficient

Comparing a force in newtons directly to the unitless static friction coefficient μs\mu_s.

WHY IT HAPPENED
ACEpath Teacher's Diagnosis

You treated the coefficient of static friction μs\mu_s as a force threshold on its own, overlooking that friction depends on the normal force (fs,max⁡=μsNf_{s,\max} = \mu_s N) and that static friction self-adjusts to balance applied forces below that threshold.

REASONING PATH
Your ACEpath teacher’s suggested approach
Dimensional Consistency
  • A force with units of newtons (FF) can only be compared to another quantity with units of newtons (fs,max⁡f_{s,\max}).

  • Multiply μs\mu_s by the normal force NN to find the force threshold fs,max⁡=μsNf_{s,\max} = \mu_s N before comparing it with the applied force FF.

Static Equilibrium Condition
  • If F≤fs,max⁡F \le f_{s,\max}, the object remains static and the static friction force exactly balances the applied force: fs=Ff_s = F.

  • Do not use μkN\mu_k N or μsN\mu_s N for the friction force when an object remains at rest; set fs=Fappliedf_s = F_{\text{applied}}.

CORRECTED PATH
ACEpath Teacher's Demonstration
  1. Calculate the maximum static friction threshold: fs,max⁡=μsN=(0.450)(235.2 N)=105.84 Nf_{s,\max} = \mu_s N = (0.450)(235.2\text{ N}) = 105.84\text{ N}.

  2. Compare the applied force to the threshold: F=85.0 N<105.84 NF = 85.0\text{ N} < 105.84\text{ N}, so the crate does not move and remains at rest.

  3. Apply horizontal equilibrium (ΣFx=0\Sigma F_x = 0): fs=F=85.0 Nf_s = F = 85.0\text{ N}.

Final answer

The crate remains at rest, and the friction force is fs=85.0 Nf_s = 85.0\text{ N}.

NEXT STEPS
Final Takeaways from Your Teacher
  • Always calculate the normal force NN first before checking motion conditions.

  • Form the maximum static friction force fs,max⁡=μsNf_{s,\max} = \mu_s N so that both quantities in your comparison have units of newtons.

  • Remember that when F<fs,max⁡F < f_{s,\max}, friction is static and equals FF, not μsN\mu_s N or μkN\mu_k N.

Lock it in

Similar question

01

A 15.0 kg15.0\text{ kg} box rests on a horizontal floor where μs=0.400\mu_s = 0.400 and g=9.80 m/s2g = 9.80\text{ m/s}^2. A horizontal force of 35.0 N35.0\text{ N} is applied to the box. Determine whether the box moves and find the magnitude of the friction force.

Answer

fs,max⁡=μsmg=(0.400)(15.0)(9.80)=58.8 Nf_{s,\max} = \mu_s mg = (0.400)(15.0)(9.80) = 58.8\text{ N}. Since F=35.0 N<58.8 NF = 35.0\text{ N} < 58.8\text{ N}, the box remains at rest. By horizontal equilibrium, fs=F=35.0 Nf_s = F = 35.0\text{ N}.

02

A 50.0 kg50.0\text{ kg} crate rests on a horizontal surface (μs=0.350\mu_s = 0.350, μk=0.250\mu_k = 0.250, g=9.80 m/s2g = 9.80\text{ m/s}^2). What horizontal force FF must be applied to just start the crate moving, and what is the friction force acting on the crate right after it starts sliding?

Answer

To initiate motion, the applied force must exceed fs,max⁡=μsmg=(0.350)(50.0)(9.80)=171.5 Nf_{s,\max} = \mu_s mg = (0.350)(50.0)(9.80) = 171.5\text{ N}. Once in motion, kinetic friction acts: fk=μkmg=(0.250)(50.0)(9.80)=122.5 Nf_k = \mu_k mg = (0.250)(50.0)(9.80) = 122.5\text{ N}.

03

A 10.0 kg10.0\text{ kg} block on a horizontal floor has μs=0.500\mu_s = 0.500. A pulling force of magnitude T=40.0 NT = 40.0\text{ N} is applied at an angle of 30.0∘30.0^\circ above the horizontal. Using g=9.80 m/s2g = 9.80\text{ m/s}^2, determine if the block moves and calculate the friction force.

Answer

Vertical equilibrium: FN=mg−Tsin⁡(30.0∘)=(10.0)(9.80)−40.0(0.5)=78.0 NF_N = mg - T\sin(30.0^\circ) = (10.0)(9.80) - 40.0(0.5) = 78.0\text{ N}. Maximum static friction: fs,max⁡=μsFN=0.500(78.0)=39.0 Nf_{s,\max} = \mu_s F_N = 0.500(78.0) = 39.0\text{ N}. The horizontal pulling force is Tx=Tcos⁡(30.0∘)=40.0(0.866)=34.64 NT_x = T\cos(30.0^\circ) = 40.0(0.866) = 34.64\text{ N}. Since Tx<fs,max⁡T_x < f_{s,\max} (34.64 N<39.0 N34.64\text{ N} < 39.0\text{ N}), the block remains at rest and fs=Tx=34.6 Nf_s = T_x = 34.6\text{ N}.

Loading workspace…