Resources
During a microfluidic triboelectric separation experiment, a stream of polystyrene micro-droplets acquires static charge. In a collection reservoir containing of non-conducting mineral oil, suspended micro-droplets accumulate a measured charge concentration of . The reservoir is then brought into contact with an isolated conducting electrode, transferring to the electrode. (a) Convert the charge concentration to coulombs per cubic meter () and determine the total initial charge in nanocoulombs () contained in the reservoir. (b) Calculate the number of excess electrons residing on the electrode after the transfer process ().
Answer and steps
Final answer
(a) , ; (b) The electrode receives a deficit of electrons corresponding to electrons transferred off the electrode.
Steps
Part (a): Charge Concentration and Initial Charge
- Convert the Charge Concentration to The given charge concentration is . Using the unit conversions and :
- Determine the Initial Charge in the Reservoir The total volume of the oil reservoir is . Evaluating the total net initial charge contained within the reservoir:
Part (b): Number of Excess Electrons on the Electrode
- Calculate the Charge Transferred to the Electrode During contact, of the net fluid charge is transferred to the isolated conducting electrode:
- Determine the Electron Count from Charge Quantization Electric charge is quantized according to , where is the elementary charge.
-
Physical Interpretation of "Excess Electrons" Because the acquired charge is positive, the electrode does not possess a surplus of electrons; rather, it has a deficit of electrons. To leave a positive net charge on the electrode, electrons must transfer off the electrode to neutralize positive charges in the fluid.
Therefore, the electrode experiences an electron deficit corresponding to electrons transferred off the electrode (equivalent to an excess electron count of ).
Typical errors
01 The student forgets to apply the 40.0% transfer fraction and divides the entire initial reservoir charge by the elementary charge.
Sample Student Work
Reviewed by ACEpath TeacherStep-by-Step Review
Walk Through It with Your Teacher- Step 1
- Step 2
- Step 3Correct
You divided the entire reservoir charge by the elementary charge instead of taking the fraction transferred to the electrode. Furthermore, because the transferred charge is positive, the electrode experiences an electron deficit (electrons left the electrode), resulting in an excess electron count of .
WHAT YOU DID WELL
Compliments from Your TeacherYou correctly converted the volumetric concentration units from to .
You correctly applied the formula to determine the initial net charge in the reservoir.
You correctly recalled the relationship between net charge and elementary charge, .
THE ERROR
Where Your ACEpath Teacher Spotted the MistakeYou substituted the reservoir's full charge rather than taking the fraction transferred to the electrode.
WHY IT HAPPENED
ACEpath Teacher's DiagnosisYou overlooked the contact condition specifying that only of the fluid's net charge moves to the electrode, and you equated a positive net charge with a positive number of excess electrons rather than a deficit.
REASONING PATH
Your ACEpath teacher’s suggested approach- Apply Partial Charge Transfer
When a contact process transfers a fraction of a system's net charge, the recipient receives .
Always compute the specific transferred charge before calculating microscopic charge carriers on the recipient.
- Interpret Charge Carrier Deficit vs. Excess
A net positive charge () indicates missing negative charge carriers, corresponding to an electron deficit of (or an excess count of ).
Check the sign of : if positive, state that electrons were transferred away, giving an electron deficit.
CORRECTED PATH
ACEpath Teacher's DemonstrationCalculate the charge transferred to the electrode: .
Apply the quantization relation to find the number of elementary charges: .
Identify that because , negative electrons were removed from the electrode, creating a deficit of electrons.
The electrode has a deficit of electrons transferred off the electrode (equivalent to an excess electron count of ).
02 The student inverts the unit conversion between liters and cubic meters by multiplying by 10^-3 instead of dividing by it.
Sample Student Work
Reviewed by ACEpath TeacherStep-by-Step Review
Walk Through It with Your Teacher- Step 1Correct
You multiplied by instead of dividing by it. Because liters are in the denominator (), converting from liters to cubic meters means placing in the denominator, which scales the concentration up by a factor of .
- Step 2
- Step 3
- Step 4Correct
You correctly calculated the magnitude of the elementary charges transferred, but because the electrode acquired a positive charge, it lost electrons. Therefore, the electrode has an electron deficit corresponding to excess electrons.
WHAT YOU DID WELL
Compliments from Your TeacherYou correctly converted the reservoir volume from milliliters to liters.
You correctly multiplied the concentration by volume to obtain the total initial charge.
You accurately calculated of the net charge transferred to the electrode.
You correctly used the elementary charge value to find the number of transferred charge carriers.
THE ERROR
Where Your ACEpath Teacher Spotted the MistakeYou multiplied by rather than dividing by it when replacing the denominator unit of liters with cubic meters.
WHY IT HAPPENED
ACEpath Teacher's DiagnosisWhen converting a compound unit with a unit in the denominator, replacing that unit with its SI equivalent requires placing the conversion factor directly into the denominator: . Multiplying the entire value by inverts the relationship, making the density smaller instead of times larger.
REASONING PATH
Your ACEpath teacher’s suggested approach- Denominator Unit Replacement
For a unit in the denominator, substitute its equivalent directly into the denominator: .
Always write compound units as explicit fractions before substituting SI prefix conversion factors.
- Charge Sign vs. Excess Electrons
Electrons carry a negative charge (). A positive net charge means an absence or deficit of electrons ().
Verify whether a positive net charge requires electrons to have left the object before stating the excess electron count.
CORRECTED PATH
ACEpath Teacher's DemonstrationWrite the concentration explicitly with units in numerator and denominator: .
Substitute directly into the denominator: .
Simplify the fraction: .
03 The student misinterprets nano- as 10^-6 instead of 10^-9 when expressing the initial charge in nanocoulombs.
Sample Student Work
Reviewed by ACEpath TeacherStep-by-Step Review
Walk Through It with Your Teacher- Step 1
- Step 2Correct
You wrote , which incorrectly equates the prefix micro () directly with nano (). Although the target value is , this false equivalence distorted your unit scale in the following steps.
- Step 3Correct
You substituted as (using ) rather than . This introduced an extra factor of into the transferred charge.
- Step 4Correct
Your division correctly implemented charge quantization , but the magnitude was inflated by due to the earlier prefix error. Furthermore, because , the electrode has lost electrons, representing an electron deficit (or an excess count of electrons).
WHAT YOU DID WELL
Compliments from Your TeacherYou correctly converted the concentration units from to .
You correctly set up the relation for charge sharing.
You correctly used the fundamental charge quantization formula .
THE ERROR
Where Your ACEpath Teacher Spotted the MistakeYou treated nanocoulombs as if they were instead of , and you reported a positive number of excess electrons for a net positive charge.
WHY IT HAPPENED
ACEpath Teacher's DiagnosisYou conflated the SI prefixes micro- () and nano- () during conversion back to base units, and you overlooked the physical convention that positive net charge corresponds to a deficit (loss) of negative electrons.
REASONING PATH
Your ACEpath teacher’s suggested approach- SI Metric Prefixes
, , , .
Always convert any prefixed quantity explicitly to standard scientific notation in base coulombs () before performing multi-step algebraic calculations.
- Physical Meaning of Excess Electrons
Electrons carry negative charge (). A net positive charge means electrons were removed (, or a deficit of electrons).
Check the sign of the acquired charge: if positive, state that electrons were transferred away, leaving an electron deficit.
CORRECTED PATH
ACEpath Teacher's DemonstrationConvert to coulombs: .
Calculate the transferred charge: .
Calculate the electron count: .
Interpret the sign: Since the net charge is , this corresponds to a deficit of electrons (or an excess count of ).
(a) , ; (b) The electrode has an electron deficit of electrons (or an excess count of electrons).
Lock it in
If an object acquires a net positive charge , what does that imply about its excess electron count?
It has an electron deficit: electrons have been removed, meaning the excess electron count is .
Similar question
A conductive sphere touches a charged insulating slab that holds an initial static charge of . During contact, of the slab's net charge is transferred to the sphere. Calculate the charge on the sphere and the number of electrons transferred off the sphere.
Answer
; electrons transferred off the sphere.
- .
- electrons.
An aerosol chamber of volume contains ionized droplets with charge concentration . A neutral metal grid is placed in the chamber and collects of the total suspended charge. Find the net charge collected by the grid and the number of excess electrons on the grid.
Answer
; excess electrons.
- .
- .
- excess electrons.
Two identical conducting spheres, and , have initial charges and . They are brought into momentary contact and separated. Sphere is then touched to a neutral, identical sphere and separated. Determine the final excess electron count on sphere .
Answer
Excess electron count on sphere is (a deficit of electrons).
- Contact between and redistributes charge equally: .
- Contact between and neutral : .
- Number of missing electrons: , so the excess electron count is .