Resources

In a Young's double-slit experiment performed in air, monochromatic light illuminates two narrow parallel slits separated by a distance d=0.180 mmd = 0.180\text{ mm}. An interference pattern is observed on a flat screen placed parallel to the slit plane at a distance L=2.40 mL = 2.40\text{ m}. Using a precision traveling microscope, a student measures the linear spatial separation between the central maximum (m=0m = 0) and the third bright fringe (m=3m = 3) to be Δy=2.14 cm\Delta y = 2.14\text{ cm}. Calculate: (a) the angular separation θ3\theta_3 of the third-order bright fringe in degrees, and (b) the wavelength λ\lambda of the incident monochromatic light source in nanometers.

Answer and steps

Final answer

(a) θ3=0.511∘\theta_3 = 0.511^\circ; (b) λ=535 nm\lambda = 535\text{ nm}

Steps

Part (a): Calculate the Angular Separation θ3\theta_3

  1. Understand the geometry of the fringe position: In Young's double-slit experiment, the linear distance on the screen from the central maximum (m=0m = 0) to the mm-th fringe is denoted by ymy_m. The line from the midpoint between the two slits to the fringe forms an angle θm\theta_m with the central axis perpendicular to the screen. From the right triangle formed by the screen distance LL and the fringe position y3y_3: tan⁡θ3=y3L\tan\theta_3 = \frac{y_3}{L}
  2. Substitute the given values into the trigonometric relation:

    • Linear position of the third bright fringe: y3=2.14 cm=2.14×10−2 my_3 = 2.14\text{ cm} = 2.14 \times 10^{-2}\text{ m}
    • Screen distance: L=2.40 mL = 2.40\text{ m}

    tan⁡θ3=2.14×10−2 m2.40 m≈8.917×10−3\tan\theta_3 = \frac{2.14 \times 10^{-2}\text{ m}}{2.40\text{ m}} \approx 8.917 \times 10^{-3}

  3. Solve for θ3\theta_3 in degrees: θ3=arctan⁡(8.917×10−3)≈8.916×10−3 rad\theta_3 = \arctan(8.917 \times 10^{-3}) \approx 8.916 \times 10^{-3}\text{ rad}

    Convert the angle from radians to degrees: θ3=8.916×10−3 rad×180∘π rad≈0.511∘\theta_3 = 8.916 \times 10^{-3}\text{ rad} \times \frac{180^\circ}{\pi\text{ rad}} \approx 0.511^\circ


Part (b): Calculate the Incident Wavelength λ\lambda

  1. Apply the condition for constructive interference (bright fringes): The path difference between the waves arriving at the screen from the two slits is given by: Δr=dsin⁡θm=mλ\Delta r = d \sin\theta_m = m\lambda where:

    • dd is the slit separation (0.180 mm=0.180×10−3 m0.180\text{ mm} = 0.180 \times 10^{-3}\text{ m}),
    • mm is the fringe order (m=3m = 3 for the third bright fringe),
    • λ\lambda is the wavelength of the light.
  2. Rearrange for the wavelength λ\lambda: λ=dsin⁡θ3m\lambda = \frac{d \sin\theta_3}{m}

    Because θ3≈0.511∘\theta_3 \approx 0.511^\circ is very small (θ≪1 rad\theta \ll 1\text{ rad}), the small-angle approximation applies: sin⁡θ3≈tan⁡θ3=y3L\sin\theta_3 \approx \tan\theta_3 = \frac{y_3}{L}

    Substituting this into the fringe equation: λ=d⋅y3mL\lambda = \frac{d \cdot y_3}{m L}

  3. Substitute the values and compute λ\lambda: λ=(0.180×10−3 m)(2.14×10−2 m)3⋅(2.40 m)\lambda = \frac{(0.180 \times 10^{-3}\text{ m})(2.14 \times 10^{-2}\text{ m})}{3 \cdot (2.40\text{ m})} λ=3.852×10−6 m27.20 m=5.35×10−7 m\lambda = \frac{3.852 \times 10^{-6}\text{ m}^2}{7.20\text{ m}} = 5.35 \times 10^{-7}\text{ m}
  4. Convert to nanometers (1 nm=10−9 m1\text{ nm} = 10^{-9}\text{ m}): λ=5.35×10−7 m=535 nm\lambda = 5.35 \times 10^{-7}\text{ m} = 535\text{ nm}

Common Pitfall: Always ensure that all lengths (dd, yy, and LL) are converted to the same base SI units (meters) before computing angles and wavelengths. Mixing centimeters and millimeters without conversion is a frequent source of order-of-magnitude errors.

Typical errors

OverviewACEpath Teacher's Diagnosis

01 The student forgets to convert the angular separation from radians into degrees for part (a).

Sample Student Work

Reviewed by ACEpath Teacher
Step-by-Step Review
Walk Through It with Your Teacher
Partially correct
  1. Step 1

    tan⁡θ3=ΔyL  ⟹  θ3≈0.02142.40=0.00892 rad\tan\theta_3 = \frac{\Delta y}{L} \implies \theta_3 \approx \frac{0.0214}{2.40} = 0.00892\text{ rad}

    Correct

    tan⁡θ3=ΔyL  ⟹  θ3≈0.008917 rad×180∘π rad≈0.511∘\tan\theta_3 = \frac{\Delta y}{L} \implies \theta_3 \approx 0.008917\text{ rad} \times \frac{180^\circ}{\pi\text{ rad}} \approx 0.511^\circ

    You correctly set up the trigonometric relation and found the angle in radians, but you did not convert your result to degrees as required by the question.

  2. Step 2

    dsin⁡θ3=3λ  ⟹  λ=0.180×10−3×0.008923=5.35×10−7 md\sin\theta_3 = 3\lambda \implies \lambda = \frac{0.180 \times 10^{-3} \times 0.00892}{3} = 5.35 \times 10^{-7}\text{ m}

  3. Step 3

    λ=535 nm\lambda = 535\text{ nm}

WHAT YOU DID WELL
Compliments from Your Teacher

You correctly related the fringe spacing on the screen to the slit-to-screen distance using the tangent function.

You correctly applied the small-angle approximation sin⁡θ≈θ\sin\theta \approx \theta when calculating the wavelength in part (b).

You properly converted all initial values into meters and stated the final wavelength in nanometers.

THE ERROR
Where Your ACEpath Teacher Spotted the Mistake
Missing Unit Conversion

You found the correct numerical angle in radians (0.00892 rad0.00892\text{ rad}), but you missed the final conversion step to degrees requested in part (a).

WHY IT HAPPENED
ACEpath Teacher's Diagnosis

You overlooked the specific unit specified in the prompt for part (a) after finishing the intermediate radian calculation.

REASONING PATH
Your ACEpath teacher’s suggested approach
Angle Unit Conversion
  • To convert an angle from radians to degrees, multiply by 180∘π rad\frac{180^\circ}{\pi\text{ rad}}.

  • Check the requested unit before boxing your angular answer; if degrees are requested, multiply radians by 180π\frac{180}{\pi}.

CORRECTED PATH
ACEpath Teacher's Demonstration
  1. Multiply the angle in radians by the unit conversion factor 180∘π rad\frac{180^\circ}{\pi\text{ rad}}.

  2. θ3=0.008917 rad×180∘π rad≈0.511∘\theta_3 = 0.008917\text{ rad} \times \frac{180^\circ}{\pi\text{ rad}} \approx 0.511^\circ

Final answer

(a) θ3=0.511∘\theta_3 = 0.511^\circ; (b) λ=535 nm\lambda = 535\text{ nm}

NEXT STEPS
Final Takeaways from Your Teacher
  • Re-read the question after completing each part to verify that every requested unit matches your final reported value.

  • Practice converting between radians and degrees on small angles encountered in wave optics.

OverviewACEpath Teacher's Diagnosis

02 The student misidentifies the third bright fringe as having order m = 2 due to counting starting from 1 instead of 0, resulting in an overestimated wavelength of 803 nm.

Sample Student Work

Reviewed by ACEpath Teacher
Step-by-Step Review
Walk Through It with Your Teacher
Partially correct
  1. Step 1

    tan⁡θ3=ΔyL=0.02142.40=0.00892  ⟹  θ3=0.00892×(180π)=0.511∘\tan\theta_3 = \frac{\Delta y}{L} = \frac{0.0214}{2.40} = 0.00892 \implies \theta_3 = 0.00892 \times \left(\frac{180}{\pi}\right) = 0.511^\circ

  2. Step 2

    dsin⁡θ3=mλwith m=2d\sin\theta_3 = m\lambda \quad \text{with } m = 2

    Correct

    dsin⁡θ3=mλwith m=3d\sin\theta_3 = m\lambda \quad \text{with } m = 3

    The central bright maximum corresponds to order m=0m = 0. Counting outward, the first fringe is m=1m = 1, the second is m=2m = 2, and the third bright fringe corresponds to m=3m = 3.

  3. Step 3

    λ=0.180×10−3×sin⁡(0.511∘)2  ⟹  λ=8.03×10−7 m=803 nm\lambda = \frac{0.180 \times 10^{-3} \times \sin(0.511^\circ)}{2} \implies \lambda = 8.03 \times 10^{-7}\text{ m} = 803\text{ nm}

    Correct

    λ=0.180×10−3 m×sin⁡(0.511∘)3=5.35×10−7 m=535 nm\lambda = \frac{0.180 \times 10^{-3}\text{ m} \times \sin(0.511^\circ)}{3} = 5.35 \times 10^{-7}\text{ m} = 535\text{ nm}

    Your arithmetic and unit conversion to nanometers followed correctly from your formula, but the final numerical value was altered because of the earlier substitution of m=2m = 2.

WHAT YOU DID WELL
Compliments from Your Teacher

You converted Δy=2.14 cm\Delta y = 2.14\text{ cm} into meters accurately.

You used the correct trigonometric relation tan⁡θ=ΔyL\tan\theta = \frac{\Delta y}{L} to determine the angular position.

You converted your angular answer from radians to degrees correctly.

You correctly identified the constructive interference formula dsin⁡θ=mλd\sin\theta = m\lambda.

THE ERROR
Where Your ACEpath Teacher Spotted the Mistake
Interference fringe order indexing error

no

WHY IT HAPPENED
ACEpath Teacher's Diagnosis

You indexed the bright fringes starting from 11 at the central fringe or subtracted one from the fringe order, forgetting that the central maximum is defined as order m=0m = 0, making the third bright fringe m=3m = 3.

REASONING PATH
Your ACEpath teacher’s suggested approach
Fringe Order Indexing
  • For double-slit bright fringes (maxima), m=0m = 0 is the central maximum, m=1m = 1 is the first maximum, m=2m = 2 is the second, and m=Nm = N is the NN-th maximum.

  • Always label the central axis as m=0m = 0 before counting outward to match the given fringe number directly to mm.

CORRECTED PATH
ACEpath Teacher's Demonstration
  1. Set the interference condition for the third maximum: dsin⁡θ3=3λd\sin\theta_3 = 3\lambda.

  2. Substitute d=0.180×10−3 md = 0.180 \times 10^{-3}\text{ m} and θ3=0.511∘\theta_3 = 0.511^\circ: λ=(0.180×10−3 m)sin⁡(0.511∘)3\lambda = \frac{(0.180 \times 10^{-3}\text{ m}) \sin(0.511^\circ)}{3}.

  3. Evaluate the numerator: (0.180×10−3)(8.919×10−3)≈1.605×10−6 m(0.180 \times 10^{-3})(8.919 \times 10^{-3}) \approx 1.605 \times 10^{-6}\text{ m}.

  4. Divide by 33: λ=5.35×10−7 m=535 nm\lambda = 5.35 \times 10^{-7}\text{ m} = 535\text{ nm}.

Final answer

(a) θ3=0.511∘\theta_3 = 0.511^\circ; (b) λ=535 nm\lambda = 535\text{ nm}

NEXT STEPS
Final Takeaways from Your Teacher
  • Review the numbering convention for constructive interference fringes starting at the central zero order.

  • Practice identifying the difference in order numbers between bright fringes (m=0,1,2,…m = 0, 1, 2, \dots) and dark fringes (m=0,1,2,…m = 0, 1, 2, \dots corresponding to path differences of (m+12)λ(m + \frac{1}{2})\lambda).

  • Solve the practice problems below to master fringe order selection.

OverviewACEpath Teacher's Diagnosis

03 The student fails to convert the slit separation d from millimeters to meters, leading to a wavelength off by a factor of 1000.

Sample Student Work

Reviewed by ACEpath Teacher
Step-by-Step Review
Walk Through It with Your Teacher
Partially correct
  1. Step 1

    θ3=0.02142.40×180π=0.511∘\theta_3 = \frac{0.0214}{2.40} \times \frac{180}{\pi} = 0.511^\circ

  2. Step 2

    λ=d×Δy3×L\lambda = \frac{d \times \Delta y}{3 \times L}

  3. Step 3

    λ=0.180×0.02143×2.40=5.35×10−4 m\lambda = \frac{0.180 \times 0.0214}{3 \times 2.40} = 5.35 \times 10^{-4}\text{ m}

    Correct

    λ=(0.180×10−3 m)(0.0214 m)3×2.40 m=5.35×10−7 m\lambda = \frac{(0.180 \times 10^{-3}\text{ m})(0.0214\text{ m})}{3 \times 2.40\text{ m}} = 5.35 \times 10^{-7}\text{ m}

    You substituted d=0.180d = 0.180 without converting millimeters to meters (0.180 mm=0.180×10−3 m0.180\text{ mm} = 0.180 \times 10^{-3}\text{ m}), which made your value 10310^3 times too large.

  4. Step 4

    λ=5.35×105 nm\lambda = 5.35 \times 10^5\text{ nm}

    Correct

    λ=5.35×10−7 m=535 nm\lambda = 5.35 \times 10^{-7}\text{ m} = 535\text{ nm}

    You correctly multiplied by 10910^9 to convert meters to nanometers, but the final value carries the unit error from Step 3.

WHAT YOU DID WELL
Compliments from Your Teacher

You correctly computed the angular position θ3=0.511∘\theta_3 = 0.511^\circ using standard triangle geometry.

You identified the correct double-slit constructive interference formula λ=dΔymL\lambda = \frac{d \Delta y}{m L}.

You converted Δy=2.14 cm\Delta y = 2.14\text{ cm} into 0.0214 m0.0214\text{ m} properly.

THE ERROR
Where Your ACEpath Teacher Spotted the Mistake
Unit Conversion Error

You substituted the slit separation dd as 0.1800.180 rather than 0.180×10−3 m0.180 \times 10^{-3}\text{ m}.

WHY IT HAPPENED
ACEpath Teacher's Diagnosis

In multi-parameter wave optics formulas, mixing different metric prefixes (such as millimeters for slit separation and meters for screen distance) without standardizing all lengths to SI base units (meters) causes power-of-ten errors.

REASONING PATH
Your ACEpath teacher’s suggested approach
Standardize to SI Base Units
  • Every distance quantity in λ=dΔymL\lambda = \frac{d \Delta y}{m L} must be expressed in meters before evaluating.

  • Write out d=0.180 mm=0.180×10−3 md = 0.180\text{ mm} = 0.180 \times 10^{-3}\text{ m} explicitly before substituting.

Visible Light Sanity Check
  • Visible light wavelengths fall in the range of approximately 400 nm400\text{ nm} to 700 nm700\text{ nm} (10−7 m10^{-7}\text{ m}).

  • If your computed wavelength is orders of magnitude outside this range, re-verify your metric prefix conversions.

CORRECTED PATH
ACEpath Teacher's Demonstration
  1. Convert the slit separation: d=0.180 mm=0.180×10−3 md = 0.180\text{ mm} = 0.180 \times 10^{-3}\text{ m}.

  2. Substitute SI units into the fringe formula: λ=(0.180×10−3 m)(0.0214 m)3×2.40 m=5.35×10−7 m\lambda = \frac{(0.180 \times 10^{-3}\text{ m})(0.0214\text{ m})}{3 \times 2.40\text{ m}} = 5.35 \times 10^{-7}\text{ m}.

  3. Convert meters to nanometers: λ=5.35×10−7 m×109 nm/m=535 nm\lambda = 5.35 \times 10^{-7}\text{ m} \times 10^9\text{ nm/m} = 535\text{ nm}.

Final answer

(a) θ3=0.511∘\theta_3 = 0.511^\circ; (b) λ=535 nm\lambda = 535\text{ nm}

NEXT STEPS
Final Takeaways from Your Teacher
  • Write down a unit conversion checklist next to the given values before plugging them into algebraic formulas.

  • Practice checking whether your calculated optical wavelength falls within the expected physical window (400 nm−700 nm400\text{ nm} - 700\text{ nm} for visible light).

Lock it in

Similar question

01

In a double-slit experiment, the second bright fringe (m=2m = 2) is located at an angle of θ2=0.00620 rad\theta_2 = 0.00620\text{ rad}. Express this angle in degrees to three significant figures.

Answer

θ2=0.00620 rad×180∘π rad≈0.355∘\theta_2 = 0.00620\text{ rad} \times \frac{180^\circ}{\pi\text{ rad}} \approx 0.355^\circ.

02

Monochromatic light of wavelength λ=600 nm\lambda = 600\text{ nm} passes through two slits separated by d=0.200 mmd = 0.200\text{ mm}. A screen is located 1.50 m1.50\text{ m} away. Calculate the angular position θ1\theta_1 of the first bright fringe in degrees.

Answer

Using dsin⁡θ1=λd\sin\theta_1 = \lambda, we have sin⁡θ1≈θ1=600×10−9 m0.200×10−3 m=3.00×10−3 rad\sin\theta_1 \approx \theta_1 = \frac{600 \times 10^{-9}\text{ m}}{0.200 \times 10^{-3}\text{ m}} = 3.00 \times 10^{-3}\text{ rad}. Converting to degrees: θ1=3.00×10−3×180∘π≈0.172∘\theta_1 = 3.00 \times 10^{-3} \times \frac{180^\circ}{\pi} \approx 0.172^\circ.

03

In a double-slit setup with screen distance L=3.00 mL = 3.00\text{ m}, the distance between the central maximum and the fourth dark fringe (m=3m = 3, path difference 3.5λ3.5\lambda) is 3.15 cm3.15\text{ cm}. Find: (a) the angular separation θ\theta of this dark fringe in degrees, and (b) the slit spacing dd if λ=500 nm\lambda = 500\text{ nm}.

Answer

(a) θ≈yL=0.0315 m3.00 m=0.0105 rad\theta \approx \frac{y}{L} = \frac{0.0315\text{ m}}{3.00\text{ m}} = 0.0105\text{ rad}. In degrees: θ=0.0105×180∘π≈0.602∘\theta = 0.0105 \times \frac{180^\circ}{\pi} \approx 0.602^\circ. (b) Using dsin⁡θ=(m+0.5)λ=3.5λd\sin\theta = (m + 0.5)\lambda = 3.5\lambda: d=3.5(500×10−9 m)0.0105=1.67×10−4 m=0.167 mmd = \frac{3.5(500 \times 10^{-9}\text{ m})}{0.0105} = 1.67 \times 10^{-4}\text{ m} = 0.167\text{ mm}.

Loading workspace…