Resources
In a physics laboratory experiment investigating energy dissipation in mechanical systems, a cart of mass on a level track is connected via a lightweight string over an ideal pulley to a hanging mass . The hanging mass is released from rest at a height of above the floor. A digital photogate timing system measures the cart speed just as the hanging mass strikes the floor to be . Using : (a) calculate the theoretical speed of the system assuming zero frictional losses, (b) determine the total mechanical energy converted into non-conservative thermal energy during the descent, and (c) find the effective average friction force acting on the cart along the track.
Answer and steps
Final answer
(a) , (b) , (c)
Steps
Part (a): Theoretical Speed Assuming Zero Friction
In an ideal system without non-conservative forces, the total mechanical energy is conserved:
- Initial Energy:
The system starts from rest, so the initial kinetic energy is zero. Taking the floor as the reference level () for gravitational potential energy, only the hanging mass undergoes a vertical displacement of : - Final Energy:
When the hanging mass strikes the floor, its gravitational potential energy reaches zero. Since the string is inextensible and taut, both the cart of mass and the hanging mass move at the same speed : -
Solve for :
Substitute the given values (, , , and ):
Part (b): Energy Lost to Thermal Dissipation
The total mechanical energy lost, , corresponds to the difference between the initial potential energy supplied to the system and the actual kinetic energy measured at the end of the descent:
- Initial Potential Energy:
- Measured Final Kinetic Energy:
- Energy Dissipation:
Part (c): Effective Friction Force
The energy lost is equal to the mechanical work done by the non-conservative retarding forces:
Because the string is inextensible, the distance traversed by the cart along the horizontal track equals the vertical descent of the hanging mass, .
Solving for the magnitude of the effective frictional force:
Typical errors
01 The student includes only the hanging mass when calculating final kinetic energy, omitting the cart mass from the accelerating system.
Sample Student Work
Reviewed by ACEpath TeacherStep-by-Step Review
Walk Through It with Your Teacher- Step 1Correct
You treated the hanging mass as if it were in free fall alone. Because the cart and hanging mass are tied together by a taut string, both masses accelerate together, so the final kinetic energy must include both masses: .
- Step 2Correct
You correctly identified that energy loss is the difference between initial potential energy and final kinetic energy, but you only calculated the final kinetic energy of the hanging mass instead of the combined system.
- Step 3Correct
You applied the correct relationship between work done by friction and energy dissipated, but this result inherited the incorrect value of from Part (b).
WHAT YOU DID WELL
Compliments from Your TeacherYou correctly identified the gravitational potential energy lost by the hanging mass as .
You used the correct work-energy relationship to find the friction force.
THE ERROR
Where Your ACEpath Teacher Spotted the Mistakeno
WHY IT HAPPENED
ACEpath Teacher's DiagnosisYou treated the hanging mass as an isolated falling body rather than recognizing that the string constrains both the cart () and the hanging mass () to move at the exact same speed, requiring both to be included in the total kinetic energy .
REASONING PATH
Your ACEpath teacher’s suggested approach- System Kinetic Energy Check
For bodies connected by a taut, inextensible string, every moving mass shares the system's speed and contributes kinetic energy: .
Always inventory all moving parts of the connected system before writing the kinetic energy term.
CORRECTED PATH
ACEpath Teacher's DemonstrationWrite the conservation of energy equation accounting for both moving masses: .
Solve for : .
Find actual measured kinetic energy: .
Compute dissipated energy: .
Calculate average friction force: .
(a) , (b) , (c)
02 The student includes only the cart's mass in the kinetic energy term, neglecting the kinetic energy of the hanging mass.
Sample Student Work
Reviewed by ACEpath TeacherStep-by-Step Review
Walk Through It with Your Teacher- Step 1Correct
Because the cart and the hanging mass are connected by a taut, inextensible string, both masses accelerate and move at the exact same speed . The total kinetic energy must account for both objects: .
- Step 2Correct
You correctly set up the energy loss as initial potential energy minus final kinetic energy, but you again omitted the hanging mass's kinetic energy from .
- Step 3Correct
Your relationship connecting friction work to energy loss over displacement is completely correct, but the final numerical value is affected by the incorrect value of from the previous step.
WHAT YOU DID WELL
Compliments from Your TeacherYou correctly calculated the initial gravitational potential energy of the system as .
You recognized that the work done against friction over displacement equals the mechanical energy lost by the system.
THE ERROR
Where Your ACEpath Teacher Spotted the Mistakeno
WHY IT HAPPENED
ACEpath Teacher's DiagnosisYou treated only the cart as possessing kinetic energy at the end of the descent, forgetting that the hanging mass is also moving at the same instantaneous speed as it reaches the floor.
REASONING PATH
Your ACEpath teacher’s suggested approach- Kinetic Energy of Connected Systems
When two or more masses are tied together and move simultaneously, every moving mass contributes to the total kinetic energy of the system: .
Always list every moving body in the system before writing down the kinetic energy expression.
CORRECTED PATH
ACEpath Teacher's DemonstrationWrite the total energy conservation equation including both masses: .
Solve for ideal speed: .
Calculate the measured final kinetic energy: .
Determine energy loss: .
Compute effective friction force: .
(a) , (b) , (c)
03 The student omits the factor of one-half when computing kinetic energy.
Sample Student Work
Reviewed by ACEpath TeacherStep-by-Step Review
Walk Through It with Your Teacher- Step 1Correct
You omitted the factor of in the total kinetic energy expression . This resulted in , which is physically impossible because it is slower than the measured speed .
- Step 2Correct
You repeated the missing factor of when evaluating the measured kinetic energy. Calculating without gave , which exceeds the initial energy of and produced a negative energy dissipation of .
- Step 3Correct
You correctly related the effective friction force to the energy lost over distance , but your calculation was affected by the erroneous negative energy loss from part (b).
WHAT YOU DID WELL
Compliments from Your TeacherYou correctly recognized that the initial mechanical energy is provided entirely by the gravitational potential energy of the hanging mass, .
You accounted for both masses moving together with the same speed at the end of the descent.
You correctly related the work done by friction to the distance traveled by the cart.
THE ERROR
Where Your ACEpath Teacher Spotted the MistakeYou wrote the kinetic energy of the combined system as instead of .
WHY IT HAPPENED
ACEpath Teacher's DiagnosisConfusing kinetic energy with momentum or omitting the fundamental coefficient in . Whenever an ideal speed turns out to be less than the measured real speed in a dissipative system, check whether a factor of was lost inside the square root.
REASONING PATH
Your ACEpath teacher’s suggested approach- Kinetic Energy Definition
Translational kinetic energy of an object or system of total mass moving at speed is always .
Always write down the general formula with the explicit before substituting algebraic terms or numbers.
- Physical Reality Check
In any real mechanical system with friction, and .
If your ideal speed is smaller than the measured speed (), or if energy loss is negative, immediately recheck your kinetic energy formula for a missing factor of or .
CORRECTED PATH
ACEpath Teacher's DemonstrationApply conservation of mechanical energy with the correct kinetic energy formula: .
Solve for : .
Compute the actual final kinetic energy: .
Determine the thermal energy dissipated: .
Calculate the effective friction force: .
(a) , (b) , (c)
Lock it in
In a modified Atwood machine (cart on a table connected by a taut string to hanging mass ), what is the total kinetic energy when both move at speed ?
. Both masses move at the same speed because the string is inextensible.
Similar question
A cart of mass on a frictionless horizontal track is pulled by a hanging mass . The hanging mass descends from rest. Using , find the final speed of the system.
Answer
. By energy conservation: .
In the same system (, , , ), the actual measured final speed is . Find the thermal energy lost to friction and the average friction force acting on the cart.
Answer
, . Initial energy . Actual kinetic energy . Thus, . The friction force is .
A glider of mass is connected to a hanging mass . The hanging mass falls from rest. A constant friction force of acts on the glider. Using , calculate the final speed of the glider.
Answer
. Work done by friction is . Available kinetic energy is . Setting yields .