Resources
A package of mass is pulled across a flat, frictionless horizontal factory floor at a constant speed by a taut cable exerting a tension of . The cable is oriented at an upward angle above the horizontal. If the magnitude of the upward normal force exerted on the package by the floor is measured to be , and taking : (a) Identify all contact and non-contact forces acting on the package. (b) Calculate the pulling angle of the cable in degrees.
Answer and steps
Final answer
(a) Non-contact force: Gravitational force (downward, magnitude ). Contact forces: Normal force (upward, magnitude ) and Tension force (angled upward and forward, magnitude ). (b) .
Steps
Part (a): Identifying the Forces
Forces acting on an object are classified into non-contact (action-at-a-distance) forces and contact forces:
-
Non-Contact Force:
- Gravitational Force (): Exerted downward toward the center of the Earth by gravity. This force acts vertically downward without physical contact.
-
Contact Forces:
- Normal Force (): Exerted perpendicular to and upward from the flat floor to support the package, with a measured magnitude of .
- Tension Force (): Exerted by the taut pulling cable, directed upward at an angle relative to the horizontal, with a magnitude of .
- (Note: Since the floor is specified as frictionless, there is no frictional contact force.)
Part (b): Calculating the Angle
-
Resolve forces along the vertical axis (-axis):
- The package remains in contact with the level floor, meaning there is no vertical acceleration ().
- By Newton's second law for the vertical direction:
- The vertical component of the tension is directed upward:
- Set up the vertical equilibrium equation:
- Substitute the known values:
- Solve for the angle :
Common Pitfall: A frequent mistake is assuming the normal force always equals the full gravitational weight (). Because the cable pulls partially upward, the vertical component of tension () supports some of the package's weight, reducing the required normal force from the floor ().
Typical errors
01 The student confuses the trigonometric components and uses cos θ instead of sin θ for the vertical component of tension, resulting in an incorrect angle of 52.2°.
Sample Student Work
Reviewed by ACEpath TeacherStep-by-Step Review
Walk Through It with Your Teacher- Step 1
Contact forces: normal force, tension ⟹ Non-contact force: gravity
- Step 2
- Step 3Correct
Because the angle is measured above the horizontal, the vertical component of the tension is opposite to , which requires the sine function (), while the horizontal component adjacent to is .
- Step 4Correct
Your algebraic rearrangement and arithmetic were carried out correctly, but the resulting angle of is the complementary angle because it stems from using cosine instead of sine.
WHAT YOU DID WELL
Compliments from Your TeacherYou correctly classified the contact forces (normal force and tension) and the non-contact force (gravity).
You calculated the gravitational weight accurately using .
You correctly set up vertical equilibrium showing that upward forces balance downward gravity.
You executed the algebraic steps and inverse trigonometric calculation with clean precision.
THE ERROR
Where Your ACEpath Teacher Spotted the MistakeYou swapped sine and cosine when resolving the tension vector along the vertical -axis.
WHY IT HAPPENED
ACEpath Teacher's DiagnosisYou associated the vertical component with instead of checking which leg of the right triangle is opposite to the angle . Since is defined relative to the horizontal floor, the adjacent side lies along the horizontal axis () and the opposite side lies along the vertical axis ().
REASONING PATH
Your ACEpath teacher’s suggested approach- SOH-CAH-TOA Vector Decomposition
For a vector of magnitude at an angle relative to the horizontal: and .
Always sketch the right triangle formed by the vector and its components, marking the given angle to confirm whether the component you need is adjacent (use cosine) or opposite (use sine).
CORRECTED PATH
ACEpath Teacher's DemonstrationWrite the vertical equilibrium condition: .
Substitute : .
Isolate the trigonometric term: .
Solve for the sine value: .
Take the inverse sine: .
(a) Contact forces: normal force () and tension (); Non-contact force: gravity (). (b)
02 The student subtracts the vertical tension component from gravity instead of adding it with normal force, setting FN = mg + T sin θ, which produces an impossible sine value greater than 1 or a negative calculation.
Sample Student Work
Reviewed by ACEpath TeacherStep-by-Step Review
Walk Through It with Your Teacher- Step 1
Contact forces: normal force, tension Non-contact force: gravitational force
- Step 2
- Step 3Correct
Both the normal force and the vertical component of the tension act in the upward direction. In vertical equilibrium, the sum of all upward forces must equal the downward gravitational force: .
- Step 4Correct
This calculation followed directly from the incorrect sign in your vertical equilibrium equation.
WHAT YOU DID WELL
Compliments from Your TeacherYou correctly classified the forces into contact and non-contact categories.
You computed the gravitational force correctly from the package mass and .
You correctly recognized that the vertical component of tension is .
THE ERROR
Where Your ACEpath Teacher Spotted the MistakeYou assigned opposite signs to the normal force and the vertical tension component, treating upward tension as if it acted downward.
WHY IT HAPPENED
ACEpath Teacher's DiagnosisA free-body diagram was not drawn or carefully checked for vector directions, leading to a confusion between forces sharing the same direction () versus opposing directions.
REASONING PATH
Your ACEpath teacher’s suggested approach- Identify Force Directions First
Draw a free-body diagram and list the direction of each vertical force: for upward forces, for downward forces.
Label both and as upward () and as downward ().
- Vertical Equilibrium Formula
When an object rests or moves horizontally on a level surface without lifting off, , so .
Write , which gives .
CORRECTED PATH
ACEpath Teacher's DemonstrationWrite the vertical equilibrium equation with both upward forces having positive signs: .
Rearrange for the vertical tension component: .
Substitute the known values: .
Solve for : .
Compute the inverse sine: .
(a) Non-contact force: gravitational force; Contact forces: normal force and tension. (b) .
03 The student assumes normal force must equal the total gravitational weight mg without accounting for the vertical component of the cable tension, leading to sin θ = 0 and θ = 0°.
Sample Student Work
Reviewed by ACEpath TeacherStep-by-Step Review
Walk Through It with Your Teacher- Step 1
Contact forces: normal force, tension ⟹ Non-contact force: gravity
- Step 2
F_N = mg = 90.0 ⟹ T\sin = mg - F_N = 90.0 - 90.0 = 0
Correctmg = (12.0)(9.80^2) = 117.6 ⟹ T\sin = mg - F_N = 117.6 - 90.0 = 27.6
You assumed that the gravitational force equals the measured normal force of . The actual gravitational force is . Because the upward component of the cable tension helps support the package, the normal force is less than the weight ().
- Step 3
45.0\sin = 0 ⟹ \sin = 0 ⟹ = 0^
Correct45.0\sin = 27.6 ⟹ \sin 0.613 ⟹ 38.0^
Carrying forward the zero vertical component from the previous step led to and .
WHAT YOU DID WELL
Compliments from Your TeacherYou correctly categorized gravity as a non-contact force and both the normal force and tension as contact forces.
You correctly formulated the vertical force balance relationship .
THE ERROR
Where Your ACEpath Teacher Spotted the MistakeYou equated the gravitational force directly to the measured normal force instead of computing from the given mass.
WHY IT HAPPENED
ACEpath Teacher's DiagnosisConfusing measured normal force with gravitational weight or assuming regardless of other vertical forces acting on the object.
REASONING PATH
Your ACEpath teacher’s suggested approach- Always Calculate Weight Independently
Gravitational force near Earth's surface depends only on mass: .
Always compute using the given mass and before substituting into equilibrium equations.
- Normal Force Depends on Vertical Balance
Normal force adjusts to satisfy ; it is not inherently equal to when angled forces or vertical accelerations are present.
Draw a free-body diagram and resolve all vertical components to write .
CORRECTED PATH
ACEpath Teacher's DemonstrationCompute the gravitational force: .
Substitute into vertical equilibrium: .
Divide by the cable tension: .
Take the inverse sine: .
Lock it in
When a force is oriented at an angle above the horizontal ground, which trigonometric function gives its vertical component?
. The vertical side is opposite to the angle measured from the horizontal.
Similar question
A sled of mass rests on a horizontal frictionless surface. A rope pulls it with a tension of directed at an angle of above the horizontal. Taking , find the magnitude of the normal force exerted by the surface on the sled.
Answer
.
A lawnmower is pushed forward and downward along flat ground with a force of applied along the handle, which makes an angle of below the horizontal. If the lawnmower's mass is and , determine the normal force exerted by the ground.
Answer
. (Because the push has a downward component, the normal force increases.)
A trunk of mass is pulled at constant speed along a flat floor by a strap exerting tension at an angle above the horizontal. If the floor exerts a normal force of on the trunk and , calculate the pulling angle in degrees.
Answer
Vertical balance requires . Thus .