Resources
Two bumper blocks on a smooth horizontal floor, () and (), undergo a direct, collinear collision. Block is initially at rest () while block approaches at . Depending on the deformation of their front bumpers, their separation speed after impact is governed by the coefficient of restitution . Determine the final velocities of both blocks and the percentage of kinetic energy converted into non-mechanical forms at the exact physical boundaries: (a) the ideal upper bound of perfect elasticity (), and (b) the lower threshold of maximum possible kinetic energy loss without external adhesion ().
Answer and steps
Final answer
(a) For : , , kinetic energy lost is ; (b) For : , , kinetic energy lost is .
Steps
Conservation of Linear Momentum
Because the horizontal surface is frictionless and no net external horizontal force acts on the two-block system, total linear momentum is conserved in all collisions:
Substitute the given values (, , , and ):
Dividing both sides by gives the momentum constraint:
Initial Mechanical Kinetic Energy
Before impact, only block is moving:
Case (a): Perfect Elasticity ()
The coefficient of restitution relates relative separation speed to relative approach speed:
For :
We now have a system of two linear equations:
Adding the two equations:
Substituting back into either equation yields:
Now compute the final kinetic energy:
The percentage of kinetic energy converted to non-mechanical energy is:
Case (b): Completely Inelastic Collision ()
For , the relative velocity of separation is zero:
Substitute this into the momentum equation:
Both blocks move together at :
Calculate the final kinetic energy:
The kinetic energy lost to internal deformation, heat, and sound is:
The percentage of kinetic energy lost is:
Key Pitfall: Even in a completely inelastic collision (), mechanical kinetic energy cannot drop to zero unless the system's total initial momentum was zero. Because total linear momentum must be conserved, the blocks must retain the kinetic energy associated with the motion of their center of mass.
Typical errors
01 The student confuses the sign of relative velocity in the coefficient of restitution formula, writing vAf - vBf instead of vBf - vAf, leading to inverted velocities for part (a).
Sample Student Work
Reviewed by ACEpath TeacherStep-by-Step Review
Walk Through It with Your Teacher- Step 1
- Step 2Correct
The coefficient of restitution is defined as separation speed over approach speed: or . Reversing the indices in the numerator without adding a negative sign inverts the direction of relative separation.
- Step 3Correct
Carrying forward your reversed restitution equation led you to conclude that block keeps moving at its initial velocity while block remains stationary, which violates physical separation.
- Step 4
- Step 5
- Step 6
WHAT YOU DID WELL
Compliments from Your TeacherYou correctly formulated and simplified the conservation of linear momentum equation.
You demonstrated a solid understanding of completely inelastic collisions by setting and finding the shared velocity.
You computed kinetic energy and percentage loss accurately in both cases.
THE ERROR
Where Your ACEpath Teacher Spotted the MistakeIn step 2, you wrote the numerator as instead of .
WHY IT HAPPENED
ACEpath Teacher's DiagnosisConflating relative separation velocity with relative approach velocity. In 1D along the axis, when object trails object , approach speed is (positive since ), while separation speed after impact requires to move faster than , so separation speed is .
REASONING PATH
Your ACEpath teacher’s suggested approach- Restitution Formula Sign Convention
Always verify that both the numerator and denominator evaluate to positive scalar speeds for a standard head-on collision.
- Physical Sanity Check
In a 1D collision where strikes stationary from behind, cannot pass through . Thus, .
Check your calculated velocities: if after impact, the blocks would be overlapping or passing through each other, signaling a reversed sign.
CORRECTED PATH
ACEpath Teacher's DemonstrationWrite the coefficient of restitution as .
Substitute , , and : .
Combine with momentum conservation by adding the equations: .
Substitute back to find .
(a) For : , , kinetic energy lost is ; (b) For : , , kinetic energy lost is .
02 The student misinterprets a completely inelastic collision (e = 0.00) as losing 100% of the initial kinetic energy rather than calculating the non-zero kinetic energy of the coalesced mass.
Sample Student Work
Reviewed by ACEpath TeacherStep-by-Step Review
Walk Through It with Your Teacher- Step 1
⟹ ⟹
- Step 2
⟹ ⟹
- Step 3
⟹ ⟹
- Step 4Correct
A coefficient of restitution corresponds to a completely inelastic collision, which causes the maximum kinetic energy loss consistent with conservation of momentum—not a loss. Because the total momentum is non-zero, the moving blocks still retain kinetic energy ().
WHAT YOU DID WELL
Compliments from Your TeacherYou correctly set up and solved the simultaneous equations for a perfectly elastic collision in part (a).
You evaluated the initial and final kinetic energies for part (a) to confirm zero energy loss.
You correctly determined that both blocks share the same final velocity of in part (b).
THE ERROR
Where Your ACEpath Teacher Spotted the Mistakeno
WHY IT HAPPENED
ACEpath Teacher's DiagnosisYou conflated relative separation speed being zero () with total final velocity being zero, incorrectly assuming that 'completely inelastic' implies kinetic energy dissipation rather than computing from the surviving center-of-mass motion.
REASONING PATH
Your ACEpath teacher’s suggested approach- Meaning of $e = 0$
A completely inelastic collision () means the objects stick together or move at the same velocity (). It does not mean the system stops moving.
Always compute using the non-zero common velocity obtained from linear momentum conservation.
- Minimum Kinetic Energy Bound
Because linear momentum is conserved, the kinetic energy of center-of-mass motion cannot be converted to non-mechanical energy without external forces.
Calculate remaining kinetic energy as to verify how much energy actually remains.
CORRECTED PATH
ACEpath Teacher's DemonstrationCalculate the kinetic energy of the combined mass moving at : .
Compute the kinetic energy converted into non-mechanical forms: .
Determine the percentage loss: .
(a) ; (b)
03 The student forgets to square the velocity in the kinetic energy formula when computing final kinetic energy in part (b), underestimating Kf and overestimating energy loss.
Sample Student Work
Reviewed by ACEpath TeacherStep-by-Step Review
Walk Through It with Your Teacher- Step 1
and
- Step 2
- Step 3
- Step 4Correct
You wrote the exponent on , but calculated , omitting the squaring step: , which gives .
- Step 5Correct
Your percentage formula is set up correctly, but the result is affected by substituting the incorrect value of instead of .
WHAT YOU DID WELL
Compliments from Your TeacherYou correctly applied the conservation of linear momentum across both collision regimes.
You correctly used the definition of the coefficient of restitution to set up relative separation speeds for both and .
You used the correct formula for percentage kinetic energy loss in both parts.
THE ERROR
Where Your ACEpath Teacher Spotted the MistakeYou wrote in your kinetic energy expression, but evaluated without squaring the velocity.
WHY IT HAPPENED
ACEpath Teacher's DiagnosisIn multi-step arithmetic involving kinetic energy expressions, velocity was treated as a linear factor during numerical evaluation rather than squaring it first () according to order of operations.
REASONING PATH
Your ACEpath teacher’s suggested approach- Evaluate Exponents First
In , the exponent applies strictly to velocity before multiplication by .
Always write out the squared numerical value explicitly, such as , before multiplying by mass and the half factor.
- Center-of-Mass Energy Sanity Check
For equal masses colliding with one initially at rest, a completely inelastic collision must conserve exactly half the initial kinetic energy: .
Check if your final kinetic energy matches , meaning the loss must be .
CORRECTED PATH
ACEpath Teacher's DemonstrationEvaluate the squared speed explicitly: .
Calculate final kinetic energy: .
Compute energy converted: .
Compute percentage loss: .
(a) , , loss is ; (b) , , loss is .
Lock it in
How is the coefficient of restitution defined in terms of approach and separation speeds?
. Both speeds are positive magnitudes when approaches from behind.
Similar question
A cart of mass traveling at strikes a stationary cart of mass elastically (). Find the final velocity of each cart.
Answer
Using and , adding gives , and .
A glider () moving at hits glider () moving in the same direction at . The collision has . Determine the final velocities and .
Answer
Momentum: . Restitution: . Solving yields and .
In a 1D collision, ball 1 (, ) hits ball 2 (, ). If , find the final velocities and the total kinetic energy dissipated.
Answer
Momentum: . Restitution: . Solving gives , . Initial , final , energy lost = .