Resources

A spacecraft orbits Earth in a circular orbit where the orbital speed is governed by v(r)=GMrv(r) = \sqrt{\frac{GM}{r}}, where GM=3.986×1014 m3/s2GM = 3.986 \times 10^{14}\text{ m}^3/\text{s}^2. (a) Derive an expression for the orbital angular speed ω\omega as a function of orbital radius rr, and evaluate lim⁡r→∞ω(r)\lim_{r \to \infty} \omega(r). (b) For a satellite in Low Earth Orbit at r1=6.70×106 mr_1 = 6.70 \times 10^6\text{ m} and a satellite in Geostationary Orbit at r2=4.22×107 mr_2 = 4.22 \times 10^7\text{ m}, calculate the respective linear speeds (v1,v2v_1, v_2) and angular speeds (ω1,ω2\omega_1, \omega_2). Round each numerical value to three significant figures.

Answer and steps

Final answer

(a) ω(r)=GMr3\omega(r) = \sqrt{\frac{GM}{r^3}}, and lim⁡r→∞ω(r)=0 rad/s\lim_{r \to \infty} \omega(r) = 0\text{ rad/s}; (b) For LEO: v1=7.71×103 m/sv_1 = 7.71 \times 10^3\text{ m/s}, ω1=1.15×10−3 rad/s\omega_1 = 1.15 \times 10^{-3}\text{ rad/s}; for GEO: v2=3.07×103 m/sv_2 = 3.07 \times 10^3\text{ m/s}, ω2=7.28×10−5 rad/s\omega_2 = 7.28 \times 10^{-5}\text{ rad/s}

Steps

Part (a): Deriving the Angular Speed and Its Limit

  1. Relate Linear Speed to Angular Speed
    For an object moving in a circle of radius rr, the linear speed vv is related to the angular speed ω\omega by the kinematic equation: v=ωr  ⟹  ω=vrv = \omega r \implies \omega = \frac{v}{r}
  2. Substitute the Orbital Speed Formula
    We are given the circular orbital speed: v(r)=GMrv(r) = \sqrt{\frac{GM}{r}}

    Substituting v(r)v(r) into the expression for ω\omega: ω(r)=1rGMr=GMr2⋅r=GMr3\omega(r) = \frac{1}{r}\sqrt{\frac{GM}{r}} = \sqrt{\frac{GM}{r^2 \cdot r}} = \sqrt{\frac{GM}{r^3}}

  3. Evaluate the Limit as r→∞r \to \infty
    As the orbital radius rr becomes arbitrarily large, the denominator r3→∞r^3 \to \infty while GMGM is a constant: lim⁡r→∞ω(r)=lim⁡r→∞GMr3=0 rad/s\lim_{r \to \infty} \omega(r) = \lim_{r \to \infty} \sqrt{\frac{GM}{r^3}} = 0\text{ rad/s}

Part (b): Numerical Calculations for LEO and GEO

Given GM=3.986×1014 m3/s2GM = 3.986 \times 10^{14}\text{ m}^3/\text{s}^2.

  1. Low Earth Orbit (LEO) at r1=6.70×106 mr_1 = 6.70 \times 10^6\text{ m}:

    • Linear Speed (v1v_1): v1=GMr1=3.986×1014 m3/s26.70×106 m=5.949×107 m2/s2≈7.71×103 m/sv_1 = \sqrt{\frac{GM}{r_1}} = \sqrt{\frac{3.986 \times 10^{14}\text{ m}^3/\text{s}^2}{6.70 \times 10^6\text{ m}}} = \sqrt{5.949 \times 10^7\text{ m}^2/\text{s}^2} \approx 7.71 \times 10^3\text{ m/s}
    • Angular Speed (ω1\omega_1): ω1=v1r1=7.713×103 m/s6.70×106 m≈1.15×10−3 rad/s\omega_1 = \frac{v_1}{r_1} = \frac{7.713 \times 10^3\text{ m/s}}{6.70 \times 10^6\text{ m}} \approx 1.15 \times 10^{-3}\text{ rad/s}
  2. Geostationary Orbit (GEO) at r2=4.22×107 mr_2 = 4.22 \times 10^7\text{ m}:

    • Linear Speed (v2v_2): v2=GMr2=3.986×1014 m3/s24.22×107 m=9.445×106 m2/s2≈3.07×103 m/sv_2 = \sqrt{\frac{GM}{r_2}} = \sqrt{\frac{3.986 \times 10^{14}\text{ m}^3/\text{s}^2}{4.22 \times 10^7\text{ m}}} = \sqrt{9.445 \times 10^6\text{ m}^2/\text{s}^2} \approx 3.07 \times 10^3\text{ m/s}
    • Angular Speed (ω2\omega_2): ω2=v2r2=3.073×103 m/s4.22×107 m≈7.28×10−5 rad/s\omega_2 = \frac{v_2}{r_2} = \frac{3.073 \times 10^3\text{ m/s}}{4.22 \times 10^7\text{ m}} \approx 7.28 \times 10^{-5}\text{ rad/s}

Pitfall Note: Be careful not to confuse the power of rr in the linear speed formula (∝r−1/2\propto r^{-1/2}) with that in the angular speed formula (∝r−3/2\propto r^{-3/2}). Because ω=v/r\omega = v/r, angular speed drops off much more rapidly with increasing distance than linear speed does.

Typical errors

OverviewACEpath Teacher's Diagnosis

01 The student misremembers the kinematic relationship between linear and angular speed as ω = v r instead of v = ω r, causing an incorrect dependence on radius.

Sample Student Work

Reviewed by ACEpath Teacher
Step-by-Step Review
Walk Through It with Your Teacher
Partially correct
  1. Step 1

    ω=v⋅r  ⟹  ω(r)=GMr⋅r=GM⋅r\omega = v \cdot r \implies \omega(r) = \sqrt{\frac{GM}{r}} \cdot r = \sqrt{GM \cdot r}

    Correct

    ω=vr  ⟹  ω(r)=1rGMr=GMr3\omega = \frac{v}{r} \implies \omega(r) = \frac{1}{r}\sqrt{\frac{GM}{r}} = \sqrt{\frac{GM}{r^3}}

    Linear speed relates to angular speed by v=ωrv = \omega r, so isolating angular speed gives ω=vr\omega = \frac{v}{r}, not ω=vr\omega = v r.

  2. Step 2

    lim⁡r→∞ω(r)=∞\lim_{r \to \infty} \omega(r) = \infty

    Correct

    lim⁡r→∞ω(r)=lim⁡r→∞GMr3=0 rad/s\lim_{r \to \infty} \omega(r) = \lim_{r \to \infty} \sqrt{\frac{GM}{r^3}} = 0\text{ rad/s}

    Because your expression had rr in the numerator, your limit evaluated to ∞\infty. With the correct formula where rr is in the denominator, the angular speed approaches 00 as r→∞r \to \infty.

  3. Step 3

    v1=3.986×10146.70×106=7.71×103 m/s  ⟹  v2=3.986×10144.22×107=3.07×103 m/sv_1 = \sqrt{\frac{3.986 \times 10^{14}}{6.70 \times 10^6}} = 7.71 \times 10^3\text{ m/s} \implies v_2 = \sqrt{\frac{3.986 \times 10^{14}}{4.22 \times 10^7}} = 3.07 \times 10^3\text{ m/s}

  4. Step 4

    ω1=v1⋅r1=5.17×1010 rad/s  ⟹  ω2=v2⋅r2=1.30×1011 rad/s\omega_1 = v_1 \cdot r_1 = 5.17 \times 10^{10}\text{ rad/s} \implies \omega_2 = v_2 \cdot r_2 = 1.30 \times 10^{11}\text{ rad/s}

    Correct

    ω1=v1r1≈1.15×10−3 rad/s  ⟹  ω2=v2r2≈7.28×10−5 rad/s\omega_1 = \frac{v_1}{r_1} \approx 1.15 \times 10^{-3}\text{ rad/s} \implies \omega_2 = \frac{v_2}{r_2} \approx 7.28 \times 10^{-5}\text{ rad/s}

    You performed the multiplication correctly based on your formula, but because the formula should divide by radius ( ω=v/r \,\omega = v/r\,), these numerical values are incorrect.

WHAT YOU DID WELL
Compliments from Your Teacher

You correctly calculated the linear orbital speeds v1v_1 and v2v_2 using the circular orbit velocity formula.

You correctly carried out algebraic simplification of square roots.

You properly evaluated the limit corresponding to your derived expression.

THE ERROR
Where Your ACEpath Teacher Spotted the Mistake
Inverted Kinematic Relationship

none

WHY IT HAPPENED
ACEpath Teacher's Diagnosis

You recalled the kinematic relation between linear and angular speed with the radius on the wrong side, writing ω=vr\omega = v r instead of v=ωrv = \omega r. Checking units ([ω]=s−1[\omega] = \text{s}^{-1} vs. [vr]=m2/s[v r] = \text{m}^2/\text{s}) immediately flags that angular speed must equal linear speed divided by radius.

REASONING PATH
Your ACEpath teacher’s suggested approach
Dimensional Verification of Rotational Kinematics
  • Linear speed has units m/s\text{m/s}, radius has units m\text{m}, and angular speed has units rad/s\text{rad/s} (or s−1\text{s}^{-1}). Therefore, v=ωrv = \omega r and ω=vr\omega = \frac{v}{r}.

  • Always verify that [linear]=[angular]×[radius][\text{linear}] = [\text{angular}] \times [\text{radius}] before rearranging.

CORRECTED PATH
ACEpath Teacher's Demonstration
  1. Set up the relationship between linear speed and angular speed: v=ωr  ⟹  ω=vrv = \omega r \implies \omega = \frac{v}{r}.

  2. Substitute v(r)=GMrv(r) = \sqrt{\frac{GM}{r}}: ω(r)=1rGMr=GMr3\omega(r) = \frac{1}{r} \sqrt{\frac{GM}{r}} = \sqrt{\frac{GM}{r^3}}.

  3. Evaluate the limit as r→∞r \to \infty: lim⁡r→∞GMr3=0 rad/s\lim_{r \to \infty} \sqrt{\frac{GM}{r^3}} = 0\text{ rad/s}.

  4. Calculate ω1=v1r1=7.713×103 m/s6.70×106 m≈1.15×10−3 rad/s\omega_1 = \frac{v_1}{r_1} = \frac{7.713 \times 10^3\text{ m/s}}{6.70 \times 10^6\text{ m}} \approx 1.15 \times 10^{-3}\text{ rad/s}.

  5. Calculate ω2=v2r2=3.073×103 m/s4.22×107 m≈7.28×10−5 rad/s\omega_2 = \frac{v_2}{r_2} = \frac{3.073 \times 10^3\text{ m/s}}{4.22 \times 10^7\text{ m}} \approx 7.28 \times 10^{-5}\text{ rad/s}.

Final answer

(a) ω(r)=GMr3\omega(r) = \sqrt{\frac{GM}{r^3}}, lim⁡r→∞ω(r)=0 rad/s\lim_{r \to \infty} \omega(r) = 0\text{ rad/s}; (b) v1=7.71×103 m/sv_1 = 7.71 \times 10^3\text{ m/s}, ω1=1.15×10−3 rad/s\omega_1 = 1.15 \times 10^{-3}\text{ rad/s}, v2=3.07×103 m/sv_2 = 3.07 \times 10^3\text{ m/s}, ω2=7.28×10−5 rad/s\omega_2 = 7.28 \times 10^{-5}\text{ rad/s}

NEXT STEPS
Final Takeaways from Your Teacher
  • Review the circular arc length definition s=rθs = r\theta and take time derivatives to anchor v=rωv = r\omega.

  • Use dimensional analysis as a quick self-check whenever you relate linear and angular quantities.

  • Recalculate angular frequency and period for satellite orbits to reinforce the r−3/2r^{-3/2} power dependence.

OverviewACEpath Teacher's Diagnosis

02 The student makes an algebraic error when bringing r into the square root, multiplying by r instead of r² under the radical to get ω = √(GM).

Sample Student Work

Reviewed by ACEpath Teacher
Step-by-Step Review
Walk Through It with Your Teacher
Partially correct
  1. Step 1

    v=ωr  ⟹  ω=vrv = \omega r \implies \omega = \frac{v}{r}

  2. Step 2

    ω(r)=1r⋅GMr=GMr⋅(1/r)=GM\omega(r) = \frac{1}{r} \cdot \sqrt{\frac{GM}{r}} = \sqrt{\frac{GM}{r \cdot (1/r)}} = \sqrt{GM}

    Correct

    ω(r)=1rGMr=GMr2⋅r=GMr3\omega(r) = \frac{1}{r}\sqrt{\frac{GM}{r}} = \sqrt{\frac{GM}{r^2 \cdot r}} = \sqrt{\frac{GM}{r^3}}

    To move a positive factor 1r\frac{1}{r} inside a square root, it must be squared: 1r=1r2\frac{1}{r} = \sqrt{\frac{1}{r^2}}. Moving it in without squaring caused rr to cancel out instead of yielding r3r^3 in the denominator.

  3. Step 3

    lim⁡r→∞ω(r)=GM\lim_{r \to \infty} \omega(r) = \sqrt{GM}

    Correct

    lim⁡r→∞ω(r)=lim⁡r→∞GMr3=0 rad/s\lim_{r \to \infty} \omega(r) = \lim_{r \to \infty} \sqrt{\frac{GM}{r^3}} = 0\text{ rad/s}

    This step evaluates the limit of your expression from Step 2. With the correct denominator of r3r^3, the limit approaches 00 as r→∞r \to \infty.

  4. Step 4

    v1=3.986×10146.70×106=7.71×103 m/sandv2=3.986×10144.22×107=3.07×103 m/sv_1 = \sqrt{\frac{3.986 \times 10^{14}}{6.70 \times 10^6}} = 7.71 \times 10^3\text{ m/s} \quad \text{and} \quad v_2 = \sqrt{\frac{3.986 \times 10^{14}}{4.22 \times 10^7}} = 3.07 \times 10^3\text{ m/s}

  5. Step 5

    ω1=3.986×1014=2.00×107 rad/sandω2=3.986×1014=2.00×107 rad/s\omega_1 = \sqrt{3.986 \times 10^{14}} = 2.00 \times 10^7\text{ rad/s} \quad \text{and} \quad \omega_2 = \sqrt{3.986 \times 10^{14}} = 2.00 \times 10^7\text{ rad/s}

    Correct

    ω1=v1r1=1.15×10−3 rad/sandω2=v2r2=7.28×10−5 rad/s\omega_1 = \frac{v_1}{r_1} = 1.15 \times 10^{-3}\text{ rad/s} \quad \text{and} \quad \omega_2 = \frac{v_2}{r_2} = 7.28 \times 10^{-5}\text{ rad/s}

    You evaluated your constant expression ω=GM\omega = \sqrt{GM} from Step 2. Using ω=vr\omega = \frac{v}{r} with the computed speeds gives the correct angular velocities.

WHAT YOU DID WELL
Compliments from Your Teacher

You correctly identified the kinematic formula relating linear velocity and angular velocity.

You correctly calculated the linear speeds for both Low Earth Orbit and Geostationary Orbit to three significant figures.

THE ERROR
Where Your ACEpath Teacher Spotted the Mistake
Algebraic radical simplification error

no

WHY IT HAPPENED
ACEpath Teacher's Diagnosis

You treated moving a factor into a square root as a linear operation rather than squaring it, writing 1rGMr\frac{1}{r}\sqrt{\frac{GM}{r}} as GMr⋅(1/r)\sqrt{\frac{GM}{r \cdot (1/r)}} instead of multiplying the denominator inside the radical by r2r^2.

REASONING PATH
Your ACEpath teacher’s suggested approach
Bringing Factors Under a Radical
  • For a>0a > 0, ab=a2ba\sqrt{b} = \sqrt{a^2 b} and 1ab=ba2\frac{1}{a}\sqrt{b} = \sqrt{\frac{b}{a^2}}.

  • Always square an outside factor when bringing it inside a square root.

Dimensional & Physical Sanity Check
  • As orbital radius increases, satellites take longer to complete an orbit, meaning angular speed ω\omega must decrease with rr.

  • Check whether your derived expression depends on rr and approaches zero as r→∞r \to \infty.

CORRECTED PATH
ACEpath Teacher's Demonstration
  1. Substitute v(r)=GMrv(r) = \sqrt{\frac{GM}{r}} into ω=vr\omega = \frac{v}{r}: ω(r)=1rGMr=1r2⋅GMr=GMr3\omega(r) = \frac{1}{r}\sqrt{\frac{GM}{r}} = \sqrt{\frac{1}{r^2} \cdot \frac{GM}{r}} = \sqrt{\frac{GM}{r^3}}.

  2. Evaluate the limit as r→∞r \to \infty: lim⁡r→∞GMr3=0 rad/s\lim_{r \to \infty} \sqrt{\frac{GM}{r^3}} = 0\text{ rad/s}.

  3. Calculate ω1\omega_1 for LEO: ω1=v1r1=7.713×103 m/s6.70×106 m≈1.15×10−3 rad/s\omega_1 = \frac{v_1}{r_1} = \frac{7.713 \times 10^3\text{ m/s}}{6.70 \times 10^6\text{ m}} \approx 1.15 \times 10^{-3}\text{ rad/s}.

  4. Calculate ω2\omega_2 for GEO: ω2=v2r2=3.073×103 m/s4.22×107 m≈7.28×10−5 rad/s\omega_2 = \frac{v_2}{r_2} = \frac{3.073 \times 10^3\text{ m/s}}{4.22 \times 10^7\text{ m}} \approx 7.28 \times 10^{-5}\text{ rad/s}.

Final answer

(a) ω(r)=GMr3\omega(r) = \sqrt{\frac{GM}{r^3}}, lim⁡r→∞ω(r)=0 rad/s\lim_{r \to \infty} \omega(r) = 0\text{ rad/s}; (b) v1=7.71×103 m/sv_1 = 7.71 \times 10^3\text{ m/s}, ω1=1.15×10−3 rad/s\omega_1 = 1.15 \times 10^{-3}\text{ rad/s}, v2=3.07×103 m/sv_2 = 3.07 \times 10^3\text{ m/s}, ω2=7.28×10−5 rad/s\omega_2 = 7.28 \times 10^{-5}\text{ rad/s}

NEXT STEPS
Final Takeaways from Your Teacher
  • Review the rule for taking coefficients inside square roots: cx=c2xc\sqrt{x} = \sqrt{c^2 x}.

  • Practice deriving Kepler's third law relations by combining v=ωr=2πrTv = \omega r = \frac{2\pi r}{T} with orbital velocity.

OverviewACEpath Teacher's Diagnosis

03 The student forgets to take the square root when computing orbital velocity, evaluating v = GM/r instead of √(GM/r).

Sample Student Work

Reviewed by ACEpath Teacher
Step-by-Step Review
Walk Through It with Your Teacher
Incorrect
  1. Step 1

    v=GMr  ⟹  ω=vr=GMr2v = \frac{GM}{r} \implies \omega = \frac{v}{r} = \frac{GM}{r^2}

    Correct

    ω(r)=v(r)r=1rGMr=GMr3\omega(r) = \frac{v(r)}{r} = \frac{1}{r}\sqrt{\frac{GM}{r}} = \sqrt{\frac{GM}{r^3}}

    You omitted the square root present in the given orbital speed equation v(r)=GMrv(r) = \sqrt{\frac{GM}{r}}. As a result, dividing by rr yielded GMr2\frac{GM}{r^2} rather than GMr3\sqrt{\frac{GM}{r^3}}.

  2. Step 2

    lim⁡r→∞ω(r)=0\lim_{r \to \infty} \omega(r) = 0

  3. Step 3

    v1=3.986×10146.70×106=5.95×107 m/s  ⟹  ω1=v1r1=5.95×1076.70×106=8.88 rad/sv_1 = \frac{3.986 \times 10^{14}}{6.70 \times 10^6} = 5.95 \times 10^7\text{ m/s} \implies \omega_1 = \frac{v_1}{r_1} = \frac{5.95 \times 10^7}{6.70 \times 10^6} = 8.88\text{ rad/s}

    Correct

    v1=3.986×1014 m3/s26.70×106 m≈7.71×103 m/s  ⟹  ω1=v1r1≈1.15×10−3 rad/sv_1 = \sqrt{\frac{3.986 \times 10^{14}\text{ m}^3/\text{s}^2}{6.70 \times 10^6\text{ m}}} \approx 7.71 \times 10^3\text{ m/s} \implies \omega_1 = \frac{v_1}{r_1} \approx 1.15 \times 10^{-3}\text{ rad/s}

    Your arithmetic correctly follows your written formulas, but your values are off because the square root was omitted from v1v_1.

  4. Step 4

    v2=3.986×10144.22×107=9.45×106 m/s  ⟹  ω2=v2r2=9.45×1064.22×107=0.224 rad/sv_2 = \frac{3.986 \times 10^{14}}{4.22 \times 10^7} = 9.45 \times 10^6\text{ m/s} \implies \omega_2 = \frac{v_2}{r_2} = \frac{9.45 \times 10^6}{4.22 \times 10^7} = 0.224\text{ rad/s}

    Correct

    v2=3.986×1014 m3/s24.22×107 m≈3.07×103 m/s  ⟹  ω2=v2r2≈7.28×10−5 rad/sv_2 = \sqrt{\frac{3.986 \times 10^{14}\text{ m}^3/\text{s}^2}{4.22 \times 10^7\text{ m}}} \approx 3.07 \times 10^3\text{ m/s} \implies \omega_2 = \frac{v_2}{r_2} \approx 7.28 \times 10^{-5}\text{ rad/s}

    Your calculations correctly followed your formulas, but the missing square root caused the calculated speed and angular frequency to be much too large.

WHAT YOU DID WELL
Compliments from Your Teacher

You remembered and applied the fundamental relationship ω=vr\omega = \frac{v}{r} between circular linear speed and angular speed.

You evaluated the limit of the rational decay as r→∞r \to \infty correctly to get 00.

THE ERROR
Where Your ACEpath Teacher Spotted the Mistake
Omitted square root in given formula

You accidentally copied v=GMrv = \frac{GM}{r} instead of v=GMrv = \sqrt{\frac{GM}{r}}, likely mixing up circular velocity v=GM/rv = \sqrt{GM/r} with gravitational potential energy per unit mass or the square of velocity v2=GMrv^2 = \frac{GM}{r}.

WHY IT HAPPENED
ACEpath Teacher's Diagnosis

Transcription slip of the circular orbital velocity relation, confusing v2=GMrv^2 = \frac{GM}{r} (obtained from mv2r=GMmr2\frac{mv^2}{r} = \frac{GMm}{r^2}) with linear speed vv itself.

REASONING PATH
Your ACEpath teacher’s suggested approach
Orbital velocity derivation check
  • Centripetal force equals gravity: mv2r=GMmr2  ⟹  v2=GMr  ⟹  v=GMr\frac{mv^2}{r} = \frac{GMm}{r^2} \implies v^2 = \frac{GM}{r} \implies v = \sqrt{\frac{GM}{r}}.

  • Always check units or perform a quick dimensional check: [GM/r]=m2/s2[GM/r] = \text{m}^2/\text{s}^2, which corresponds to v2v^2, so vv must take the square root.

Physical reasonableness of orbital speed
  • Low Earth Orbit speeds are on the order of kilometers per second (≈7.7×103 m/s\approx 7.7 \times 10^3\text{ m/s}), not tens of thousands of kilometers per second (speed of light is 3×108 m/s3 \times 10^8\text{ m/s}).

  • When calculating satellite orbital speeds, check whether the resulting speed exceeds orbital or relativistic scales.

CORRECTED PATH
ACEpath Teacher's Demonstration
  1. Start with the correct linear velocity equation: v(r)=GMr=(GM)1/2r−1/2v(r) = \sqrt{\frac{GM}{r}} = (GM)^{1/2} r^{-1/2}.

  2. Apply ω(r)=v(r)r=GM/rr=GMr3\omega(r) = \frac{v(r)}{r} = \frac{\sqrt{GM/r}}{r} = \sqrt{\frac{GM}{r^3}}.

  3. Substitute r1=6.70×106 mr_1 = 6.70 \times 10^6\text{ m} into v1=3.986×10146.70×106≈7.71×103 m/sv_1 = \sqrt{\frac{3.986 \times 10^{14}}{6.70 \times 10^6}} \approx 7.71 \times 10^3\text{ m/s}, and find ω1=v1r1≈1.15×10−3 rad/s\omega_1 = \frac{v_1}{r_1} \approx 1.15 \times 10^{-3}\text{ rad/s}.

  4. Substitute r2=4.22×107 mr_2 = 4.22 \times 10^7\text{ m} into v2=3.986×10144.22×107≈3.07×103 m/sv_2 = \sqrt{\frac{3.986 \times 10^{14}}{4.22 \times 10^7}} \approx 3.07 \times 10^3\text{ m/s}, and find ω2=v2r2≈7.28×10−5 rad/s\omega_2 = \frac{v_2}{r_2} \approx 7.28 \times 10^{-5}\text{ rad/s}.

Final answer

(a) ω(r)=GMr3\omega(r) = \sqrt{\frac{GM}{r^3}}, and lim⁡r→∞ω(r)=0 rad/s\lim_{r \to \infty} \omega(r) = 0\text{ rad/s}; (b) For LEO: v1=7.71×103 m/sv_1 = 7.71 \times 10^3\text{ m/s}, ω1=1.15×10−3 rad/s\omega_1 = 1.15 \times 10^{-3}\text{ rad/s}; for GEO: v2=3.07×103 m/sv_2 = 3.07 \times 10^3\text{ m/s}, ω2=7.28×10−5 rad/s\omega_2 = 7.28 \times 10^{-5}\text{ rad/s}

NEXT STEPS
Final Takeaways from Your Teacher
  • Review the centripetal derivation mv2r=GMmr2\frac{mv^2}{r} = \frac{GMm}{r^2} to solidify why orbital velocity has a square root.

  • Perform dimensional analysis on GMr\frac{GM}{r} to verify that it has units of velocity squared (m2/s2)(\text{m}^2/\text{s}^2).

  • Practice solving circular orbit problems where both vv and ω\omega are expressed in terms of radius rr.

Lock it in

Similar question

01

A bicycle wheel of radius 0.35 m0.35\text{ m} rolls without slipping at a linear speed of 7.0 m/s7.0\text{ m/s}. Find the angular speed ω\omega of the wheel.

Answer

ω=vr=7.0 m/s0.35 m=20 rad/s\omega = \frac{v}{r} = \frac{7.0\text{ m/s}}{0.35\text{ m}} = 20\text{ rad/s}.

02

A planet orbits a star at a radius of R=1.0×1011 mR = 1.0 \times 10^{11}\text{ m} with a constant linear speed of v=3.0×104 m/sv = 3.0 \times 10^4\text{ m/s}. (a) Determine the angular speed ω\omega. (b) Determine the orbital period TT.

Answer

(a) ω=vR=3.0×104 m/s1.0×1011 m=3.0×10−7 rad/s\omega = \frac{v}{R} = \frac{3.0 \times 10^4\text{ m/s}}{1.0 \times 10^{11}\text{ m}} = 3.0 \times 10^{-7}\text{ rad/s}. (b) T=2πω=2π3.0×10−7≈2.09×107 sT = \frac{2\pi}{\omega} = \frac{2\pi}{3.0 \times 10^{-7}} \approx 2.09 \times 10^7\text{ s}.

03

An artificial satellite has an orbital period of T=5400 sT = 5400\text{ s} in a circular orbit of radius r=6.60×106 mr = 6.60 \times 10^6\text{ m}. Derive expressions for and compute (a) its angular speed ω\omega, and (b) its tangential linear speed vv.

Answer

(a) ω=2πT=2π5400 s≈1.16×10−3 rad/s\omega = \frac{2\pi}{T} = \frac{2\pi}{5400\text{ s}} \approx 1.16 \times 10^{-3}\text{ rad/s}. (b) v=ωr=(1.164×10−3 rad/s)(6.60×106 m)≈7.68×103 m/sv = \omega r = (1.164 \times 10^{-3}\text{ rad/s})(6.60 \times 10^6\text{ m}) \approx 7.68 \times 10^3\text{ m/s}.

Loading workspace…