Resources

An acoustic loudspeaker emits a sinusoidal sound wave with a pressure amplitude of ΔP1=0.200 Pa\Delta P_1 = 0.200\text{ Pa} into standard air, producing an initial sound level of β1=60.0 dB\beta_1 = 60.0\text{ dB}. The audio engineer adjusts the amplifier gain so that the displacement amplitude of the air molecules increases by a factor of 3.003.00 while keeping the driving frequency and air temperature constant. Given that acoustic intensity is directly proportional to the square of the pressure amplitude (I∝(ΔP)2I \propto (\Delta P)^2) and that perceived sound level in decibels is defined as β=(10 dB)log⁡10(I/I0)\beta = (10\text{ dB})\log_{10}(I/I_0), calculate: (a) the new pressure amplitude ΔP2\Delta P_2, (b) the factor by which the acoustic intensity increases, and (c) the new sound level β2\beta_2 in decibels.

Answer and steps

Final answer

(a) ΔP2=0.600 Pa\Delta P_2 = 0.600\text{ Pa}; (b) The intensity increases by a factor of 9.009.00; (c) β2=69.5 dB\beta_2 = 69.5\text{ dB}.

Steps

Part (a): Determine the New Pressure Amplitude ΔP2\Delta P_2

In a harmonic acoustic wave traveling through a uniform medium, the pressure amplitude ΔP\Delta P is directly proportional to the molecular displacement amplitude smax⁡s_{\max}:

ΔP=ρvωsmax⁡=2πfρvsmax⁡\Delta P = \rho v \omega s_{\max} = 2\pi f \rho v s_{\max}

where ρ\rho is the density of air, vv is the speed of sound, and ff is the wave frequency.

Because the driving frequency and air properties remain constant, ρ\rho, vv, and ω\omega do not change. Thus, the pressure amplitude scales linearly with the displacement amplitude:

ΔP2ΔP1=smax⁡,2smax⁡,1=3.00\frac{\Delta P_2}{\Delta P_1} = \frac{s_{\max, 2}}{s_{\max, 1}} = 3.00

Substitute the given initial pressure amplitude:

ΔP2=3.00⋅ΔP1=3.00⋅0.200 Pa=0.600 Pa\Delta P_2 = 3.00 \cdot \Delta P_1 = 3.00 \cdot 0.200\text{ Pa} = 0.600\text{ Pa}


Part (b): Determine the Intensity Increase Factor

Acoustic intensity II is directly proportional to the square of the pressure amplitude:

I∝(ΔP)2I \propto (\Delta P)^2

Therefore, the ratio of the new intensity I2I_2 to the initial intensity I1I_1 is:

I2I1=(ΔP2ΔP1)2=(3.00)2=9.00\frac{I_2}{I_1} = \left(\frac{\Delta P_2}{\Delta P_1}\right)^2 = (3.00)^2 = 9.00

The acoustic intensity increases by a factor of 9.009.00.


Part (c): Calculate the New Sound Level β2\beta_2

The sound level in decibels (dB\text{dB}) is related to intensity by:

β=(10 dB)log⁡10(II0)\beta = (10\text{ dB})\log_{10}\left(\frac{I}{I_0}\right)

where I0I_0 is the reference threshold of hearing. When comparing two sound levels, the change in sound level depends solely on the ratio of the intensities:

β2−β1=(10 dB)log⁡10(I2I1)\beta_2 - \beta_1 = (10\text{ dB})\log_{10}\left(\frac{I_2}{I_1}\right)

Substitute I2I1=9.00\frac{I_2}{I_1} = 9.00 and β1=60.0 dB\beta_1 = 60.0\text{ dB}:

β2−60.0 dB=(10 dB)log⁡10(9.00)\beta_2 - 60.0\text{ dB} = (10\text{ dB})\log_{10}(9.00)

Using log⁡10(9.00)≈0.9542\log_{10}(9.00) \approx 0.9542:

β2−60.0 dB≈10⋅0.9542 dB≈9.54 dB\beta_2 - 60.0\text{ dB} \approx 10 \cdot 0.9542\text{ dB} \approx 9.54\text{ dB}

β2=60.0 dB+9.54 dB≈69.5 dB\beta_2 = 60.0\text{ dB} + 9.54\text{ dB} \approx 69.5\text{ dB}

Common Pitfall: A common mistake is to assume that multiplying the wave amplitude by 33 triples the decibel level (60 dB×3=180 dB60\text{ dB} \times 3 = 180\text{ dB}). Because the decibel scale is logarithmic, a multiplicative increase in amplitude or intensity corresponds to an additive increase in decibels.

Typical errors

OverviewACEpath Teacher's Diagnosis

01 The student forgets that intensity depends quadratically on amplitude, mistakenly assuming intensity scales linearly with displacement amplitude.

Sample Student Work

Reviewed by ACEpath Teacher
Step-by-Step Review
Walk Through It with Your Teacher
Partially correct
  1. Step 1

    ΔP2=3.00×ΔP1  ⟹  ΔP2=3.00×0.200 Pa=0.600 Pa\Delta P_2 = 3.00 \times \Delta P_1 \implies \Delta P_2 = 3.00 \times 0.200\text{ Pa} = 0.600\text{ Pa}

  2. Step 2

    I2I1\frac{I_2}{I_1} = ΔP2ΔP1\frac{\Delta P_2}{\Delta P_1} = 3.00   ⟹  \implies Intensity increases by a factor of \text{Intensity increases by a factor of } 3.00

    Correct

    I2I1\frac{I_2}{I_1} = (ΔP2ΔP1)\left(\frac{\Delta P_2}{\Delta P_1}\right)^2 = (3.00)^2 = 9.00

    Acoustic wave intensity is proportional to the square of the pressure amplitude (I∝(ΔP)2I \propto (\Delta P)^2). When amplitude increases by a factor of 3.003.00, the intensity increases by a factor of 3.002=9.003.00^2 = 9.00.

  3. Step 3

    \Delta$$\beta = 10 \log_{10}(3.00) dB\text{ dB} = 4.77 dB\text{ dB}   ⟹  \implies β\beta_2 = 60.0 dB\text{ dB} + 4.77 dB\text{ dB} = 64.8$\text{ dB}$$

    Correct

    β\beta2 = β\beta1 + 10\log{10}(9.00) dB\text{ dB} = 60.0 dB\text{ dB} + 9.54 dB\text{ dB} = 69.5 dB\text{ dB}

    Your decibel difference method Δβ=10log⁡10(I2/I1)\Delta\beta = 10\log_{10}(I_2/I_1) was conceptually sound, but propagating the incorrect intensity ratio 3.003.00 led to 64.8 dB64.8\text{ dB} instead of 69.5 dB69.5\text{ dB}.

WHAT YOU DID WELL
Compliments from Your Teacher

You correctly calculated the new pressure amplitude as 0.600 Pa0.600\text{ Pa}.

You correctly applied the logarithmic relation Δβ=10log⁡10(I2/I1) dB\Delta\beta = 10\log_{10}(I_2/I_1)\text{ dB} to find the change in sound level.

THE ERROR
Where Your ACEpath Teacher Spotted the Mistake
Linear vs. Quadratic Scaling Error

No, this is a conceptual error regarding wave energy/intensity dependence on amplitude rather than an arithmetic slip.

WHY IT HAPPENED
ACEpath Teacher's Diagnosis

You treated the ratio of wave intensities as directly proportional to the amplitude ratio (I2/I1=ΔP2/ΔP1I_2/I_1 = \Delta P_2/\Delta P_1) rather than quadratic (I2/I1=(ΔP2/ΔP1)2I_2/I_1 = (\Delta P_2/\Delta P_1)^2).

REASONING PATH
Your ACEpath teacher’s suggested approach
Wave Intensity Scaling Law
  • For harmonic waves, acoustic intensity II is proportional to the square of the wave amplitude (I∝(ΔP)2∝smax⁡2I \propto (\Delta P)^2 \propto s_{\max}^2).

  • Whenever wave amplitude changes by a factor of kk, always square that factor (k2k^2) to find the change in intensity.

CORRECTED PATH
ACEpath Teacher's Demonstration
  1. Use the quadratic intensity scaling relationship: I2I1=(ΔP2ΔP1)2=(3.00)2=9.00\frac{I_2}{I_1} = \left(\frac{\Delta P_2}{\Delta P_1}\right)^2 = (3.00)^2 = 9.00.

  2. Substitute the correct ratio into the decibel formula: Δβ=10log⁡10(9.00) dB≈9.54 dB\Delta\beta = 10\log_{10}(9.00)\text{ dB} \approx 9.54\text{ dB}.

  3. Add the increase to the original sound level: β2=60.0 dB+9.54 dB=69.5 dB\beta_2 = 60.0\text{ dB} + 9.54\text{ dB} = 69.5\text{ dB}.

Final answer

(a) ΔP2=0.600 Pa\Delta P_2 = 0.600\text{ Pa}; (b) The intensity increases by a factor of 9.009.00; (c) β2=69.5 dB\beta_2 = 69.5\text{ dB}

NEXT STEPS
Final Takeaways from Your Teacher
  • Review the mechanical definition of wave intensity to remember why power per unit area depends on the square of particle displacement and pressure amplitudes.

  • Practice calculating decibel changes directly from amplitude ratios using Δβ=20log⁡10(A2/A1)\Delta\beta = 20\log_{10}(A_2/A_1) to avoid forgetting the exponent.

OverviewACEpath Teacher's Diagnosis

02 The student misremembers the decibel formula by using a factor of 20 instead of 10 for the intensity ratio, confusing the intensity decibel definition with the pressure ratio definition.

Sample Student Work

Reviewed by ACEpath Teacher
Step-by-Step Review
Walk Through It with Your Teacher
Partially correct
  1. Step 1

    ΔP2=3.00×0.200 Pa=0.600 Pa\Delta P_2 = 3.00 \times 0.200\text{ Pa} = 0.600\text{ Pa}

  2. Step 2

    I2I1=(3.00)2=9.00  ⟹  Intensity increases by a factor of 9.00\frac{I_2}{I_1} = (3.00)^2 = 9.00 \implies \text{Intensity increases by a factor of } 9.00

  3. Step 3

    Δβ=20log⁡10(I2I1)=20log⁡10(9.00) dB=19.1 dB\Delta \beta = 20\log_{10}\left(\frac{I_2}{I_1}\right) = 20\log_{10}(9.00)\text{ dB} = 19.1\text{ dB}

    Correct

    Δβ=10log⁡10(I2I1)=10log⁡10(9.00) dB≈9.54 dB\Delta \beta = 10\log_{10}\left(\frac{I_2}{I_1}\right) = 10\log_{10}(9.00)\text{ dB} \approx 9.54\text{ dB}

    The decibel formula for an intensity ratio uses a factor of 1010, not 2020: Δβ=10log⁡10(I2/I1)\Delta \beta = 10\log_{10}(I_2/I_1). A factor of 2020 is only used when taking the logarithm of an amplitude or pressure ratio because I∝(ΔP)2I \propto (\Delta P)^2 brings out an exponent of 22.

  4. Step 4

    β2=60.0 dB+19.1 dB=79.1 dB\beta_2 = 60.0\text{ dB} + 19.1\text{ dB} = 79.1\text{ dB}

    Correct

    β2=60.0 dB+9.54 dB≈69.5 dB\beta_2 = 60.0\text{ dB} + 9.54\text{ dB} \approx 69.5\text{ dB}

    Your addition method was correct, but the final value was affected by the error in the decibel change calculation.

WHAT YOU DID WELL
Compliments from Your Teacher

You correctly related the displacement amplitude to the pressure amplitude.

You accurately applied the quadratic scaling relation I∝(ΔP)2I \propto (\Delta P)^2 to find the intensity factor.

You recognized that an increase in intensity leads to an additive change in decibels.

THE ERROR
Where Your ACEpath Teacher Spotted the Mistake
Decibel formula prefactor confusion

no

WHY IT HAPPENED
ACEpath Teacher's Diagnosis

You mixed up the decibel formula for intensity ratios, Δβ=10log⁡10(I2/I1)\Delta \beta = 10\log_{10}(I_2/I_1), with the formula for pressure or amplitude ratios, Δβ=20log⁡10(ΔP2/ΔP1)\Delta \beta = 20\log_{10}(\Delta P_2/\Delta P_1).

REASONING PATH
Your ACEpath teacher’s suggested approach
Decibel Prefactor Rule
  • Use 10log⁡10(power or intensity ratio)10\log_{10}(\text{power or intensity ratio}), but 20log⁡10(field or amplitude ratio)20\log_{10}(\text{field or amplitude ratio}).

  • Check whether the argument of your logarithm is an intensity ratio (I2/I1I_2/I_1) or an amplitude ratio (A2/A1A_2/A_1). If it is intensity, use 1010; if amplitude, use 2020.

CORRECTED PATH
ACEpath Teacher's Demonstration
  1. Apply the intensity decibel definition: Δβ=10log⁡10(I2I1)=10log⁡10(9.00) dB≈9.54 dB\Delta \beta = 10\log_{10}\left(\frac{I_2}{I_1}\right) = 10\log_{10}(9.00)\text{ dB} \approx 9.54\text{ dB}.

  2. Add the decibel increase to the initial sound level: β2=β1+Δβ=60.0 dB+9.54 dB=69.54 dB≈69.5 dB\beta_2 = \beta_1 + \Delta \beta = 60.0\text{ dB} + 9.54\text{ dB} = 69.54\text{ dB} \approx 69.5\text{ dB}.

Final answer

(a) ΔP2=0.600 Pa\Delta P_2 = 0.600\text{ Pa}; (b) The intensity increases by a factor of 9.009.00; (c) β2=69.5 dB\beta_2 = 69.5\text{ dB}

NEXT STEPS
Final Takeaways from Your Teacher
  • Review the distinction between power-quantity decibels (10log⁡1010\log_{10}) and root-power quantity decibels (20log⁡1020\log_{10}).

  • Practice converting between sound pressure level (SPL) using ΔP\Delta P and sound intensity level using II.

OverviewACEpath Teacher's Diagnosis

03 The student treats the logarithmic decibel scale as linear by directly multiplying the initial sound level in decibels by the amplitude scaling factor.

Sample Student Work

Reviewed by ACEpath Teacher
Step-by-Step Review
Walk Through It with Your Teacher
Partially correct
  1. Step 1

    ΔP2=3.00×0.200 Pa=0.600 Pa\Delta P_2 = 3.00 \times 0.200\text{ Pa} = 0.600\text{ Pa}

  2. Step 2

    I2/I1=(ΔP2ΔP1)2=3.002=9.00  ⟹  Intensity increases by a factor of 9.00I_2/I_1 = \left(\frac{\Delta P_2}{\Delta P_1}\right)^2 = 3.00^2 = 9.00 \implies \text{Intensity increases by a factor of } 9.00

  3. Step 3

    β2=3.00×β1  ⟹  β2=3.00×60.0 dB=180 dB\beta_2 = 3.00 \times \beta_1 \implies \beta_2 = 3.00 \times 60.0\text{ dB} = 180\text{ dB}

    Correct

    β2=β1+(10 dB)log⁡10(I2I1)=60.0 dB+(10 dB)log⁡10(9.00)≈69.5 dB\beta_2 = \beta_1 + (10\text{ dB})\log_{10}\left(\frac{I_2}{I_1}\right) = 60.0\text{ dB} + (10\text{ dB})\log_{10}(9.00) \approx 69.5\text{ dB}

    You multiplied the initial decibel level directly by the factor of 3.003.00. Because the decibel scale is logarithmic, a multiplicative increase in intensity corresponds to an additive increase in sound level: β2=β1+10log⁡10(I2/I1)\beta_2 = \beta_1 + 10\log_{10}(I_2/I_1).

WHAT YOU DID WELL
Compliments from Your Teacher

You correctly related the molecular displacement amplitude to the pressure amplitude to find ΔP2=0.600 Pa\Delta P_2 = 0.600\text{ Pa}.

You accurately squared the amplitude ratio to deduce that the intensity increases by a factor of 9.009.00.

THE ERROR
Where Your ACEpath Teacher Spotted the Mistake
Linear scaling of logarithmic decibel level

Multiplying the decibel value directly by the amplitude factor rather than adding 10log⁡10(I2/I1)10\log_{10}(I_2/I_1).

WHY IT HAPPENED
ACEpath Teacher's Diagnosis

The decibel scale is defined logarithmically as β=(10 dB)log⁡10(I/I0)\beta = (10\text{ dB})\log_{10}(I/I_0). Multiplying the physical intensity by a factor KK shifts the decibel value additively by Δβ=(10 dB)log⁡10(K)\Delta \beta = (10\text{ dB})\log_{10}(K), rather than scaling the sound level by KK or K\sqrt{K}.

REASONING PATH
Your ACEpath teacher’s suggested approach
Decibel Change Rule
  • When intensity changes by a factor of I2I1\frac{I_2}{I_1}, the decibel level changes by Δβ=(10 dB)log⁡10(I2I1)\Delta \beta = (10\text{ dB})\log_{10}\left(\frac{I_2}{I_1}\right).

  • Calculate the intensity ratio first, take its base-10 logarithm, multiply by 10 dB10\text{ dB}, and add that result to the initial decibel level.

CORRECTED PATH
ACEpath Teacher's Demonstration
  1. Use the sound level difference formula: β2−β1=(10 dB)log⁡10(I2I1)\beta_2 - \beta_1 = (10\text{ dB})\log_{10}\left(\frac{I_2}{I_1}\right).

  2. Substitute I2I1=9.00\frac{I_2}{I_1} = 9.00: Δβ=(10 dB)log⁡10(9.00)≈10⋅0.9542 dB=9.54 dB\Delta\beta = (10\text{ dB})\log_{10}(9.00) \approx 10 \cdot 0.9542\text{ dB} = 9.54\text{ dB}.

  3. Add the increase to the initial level: β2=60.0 dB+9.54 dB=69.54 dB≈69.5 dB\beta_2 = 60.0\text{ dB} + 9.54\text{ dB} = 69.54\text{ dB} \approx 69.5\text{ dB}.

Final answer

β2=69.5 dB\beta_2 = 69.5\text{ dB}

NEXT STEPS
Final Takeaways from Your Teacher
  • Review how multiplying an input inside a logarithm converts into an added term outside the logarithm: log⁡10(a⋅b)=log⁡10(a)+log⁡10(b)\log_{10}(a \cdot b) = \log_{10}(a) + \log_{10}(b).

  • Memorize common decibel benchmarks: doubling the intensity (2×2\times) adds approximately +3.0 dB+3.0\text{ dB}, and increasing intensity tenfold (10×10\times) adds +10.0 dB+10.0\text{ dB}.

Lock it in

Similar question

01

A sound source increases its displacement amplitude by a factor of 4.04.0 with no change in frequency or medium. By what factor does the sound intensity increase, and by how many decibels does the sound level rise?

Answer

Intensity factor =4.02=16= 4.0^2 = 16. Sound level change Δβ=10log⁡10(16) dB≈12.0 dB\Delta\beta = 10\log_{10}(16)\text{ dB} \approx 12.0\text{ dB}.

02

An audio engineer observes that the sound level of a musical tone increases from 70.0 dB70.0\text{ dB} to 80.0 dB80.0\text{ dB}. By what factor did (a) the intensity increase, and (b) the wave's pressure amplitude increase?

Answer

(a) Δβ=10.0 dB  ⟹  I2/I1=1010/10=10\Delta\beta = 10.0\text{ dB} \implies I_2/I_1 = 10^{10/10} = 10. (b) Since I∝(ΔP)2I \propto (\Delta P)^2, the pressure amplitude increases by 10≈3.16\sqrt{10} \approx 3.16.

03

Two identical flutes play the same note in phase. One flute alone produces a pressure amplitude of ΔP0\Delta P_0 and a sound level of 65.0 dB65.0\text{ dB}. When both play together, constructive interference doubles the pressure amplitude to 2ΔP02\Delta P_0. Find the resulting sound level βtotal\beta_{\text{total}}.

Answer

Doubling the amplitude gives Itotal/I0=(2)2=4.0I_{\text{total}}/I_0 = (2)^2 = 4.0. The sound level becomes βtotal=65.0 dB+10log⁡10(4.0) dB=65.0 dB+6.02 dB≈71.0 dB\beta_{\text{total}} = 65.0\text{ dB} + 10\log_{10}(4.0)\text{ dB} = 65.0\text{ dB} + 6.02\text{ dB} \approx 71.0\text{ dB}.

Loading workspace…