Resources

A real distribution transformer with primary turns Np=1000N_p = 1000 and secondary turns Ns=100N_s = 100 operates at Vp=2400 V (rms)V_p = 2400\text{ V (rms)} at f=60.0 Hzf = 60.0\text{ Hz}. In the asymptotic limit where the secondary load resistance approaches infinity (RL→∞R_L \to \infty, an open-circuit secondary condition): (a) Explain why the primary current does not approach zero, and identify the physical role of this asymptotic primary current. (b) If the open-circuit core requires a magnetizing inductance of Lm=12.7 HL_m = 12.7\text{ H} in parallel with an equivalent core-loss resistance of Rc=48.0 kΩR_c = 48.0\text{ k}\Omega, compute the magnitude of the steady-state no-load primary current I0I_{0} drawn from the line.

Answer and steps

Final answer

(a) As RL→∞R_L \to \infty, the primary still draws an excitation (no-load) current I0I_0 consisting of a magnetizing current to establish the alternating magnetic core flux ΦB(t)\Phi_B(t) and a core-loss current to supply hysteresis and eddy-current dissipations; (b) I0=0.504 AI_0 = 0.504\text{ A}

Steps

01

Find the angular frequency and magnetizing reactance

Part (a): Physical Role of the No-Load Primary Current

In an ideal transformer with an open-circuit secondary (RL→∞R_L \to \infty), the secondary current is zero (Is=0I_s = 0), which would suggest zero primary current. However, in a real transformer, the primary winding must still draw a non-zero current called the excitation current (or no-load current, I0I_0). This current does not vanish for two fundamental physical reasons:

  1. Establishing the Magnetic Flux (Magnetizing Component, ImI_m): According to Faraday's law, a back electromotive force (EMF) must be induced in the primary winding to oppose the applied alternating voltage VpV_p: ep(t)=−NpdΦBdte_p(t) = -N_p \frac{d\Phi_B}{dt} To produce the time-varying magnetic flux ΦB(t)\Phi_B(t) inside the ferromagnetic core, the core material requires an alternating magnetizing force (Ampere's law, NpIm≈∮H⃗⋅dℓ⃗N_p I_m \approx \oint \vec{H} \cdot d\vec{\ell}). Because the magnetic permeability of the core is finite (not infinite), a magnetizing current ImI_m is necessary to sustain this magnetic field. This component lags the applied primary voltage by 90∘90^\circ.
  2. Supplying Core Losses (Core-Loss Component, IcI_c): The continuously alternating magnetic field causes real power dissipation in the ferromagnetic core due to:
    • Hysteresis losses: Work done in repeatedly realigning magnetic domains.
    • Eddy-current losses: Joule heating from induced circulating currents within the conductive iron core laminations. To supply this real power, the primary draws a component IcI_c that is in phase with the applied voltage VpV_p. Therefore, even with an open secondary, I0I_0 persists as the vector sum of the magnetizing current and the core-loss current: I⃗0=I⃗c+I⃗m\vec{I}_0 = \vec{I}_c + \vec{I}_m

Part (b): Calculation of the Magnitude of I0I_0

The angular frequency ω\omega of the 60.0 Hz60.0\text{ Hz} supply is: ω=2πf=2π(60.0 s−1)≈377.0 rad/s\omega = 2\pi f = 2\pi (60.0\text{ s}^{-1}) \approx 377.0\text{ rad/s}

The inductive reactance associated with the magnetizing branch LmL_m is: Xm=ωLm=(376.99 rad/s)(12.7 H)≈4788 ΩX_m = \omega L_m = (376.99\text{ rad/s})(12.7\text{ H}) \approx 4788\ \Omega

02

Calculate the individual current components

The equivalent parallel no-load branch has the core-loss resistance Rc=48.0 kΩ=48 000 ΩR_c = 48.0\text{ k}\Omega = 48\,000\ \Omega and the magnetizing reactance XmX_m directly across the applied voltage Vp=2400 VV_p = 2400\text{ V}:

  • In-phase core-loss current: Ic=VpRc=2400 V48 000 Ω=0.0500 AI_c = \frac{V_p}{R_c} = \frac{2400\text{ V}}{48\,000\ \Omega} = 0.0500\text{ A}
  • Quadrature magnetizing current: Im=VpXm=2400 V4787.8 Ω≈0.5013 AI_m = \frac{V_p}{X_m} = \frac{2400\text{ V}}{4787.8\ \Omega} \approx 0.5013\text{ A}
03

Combine the orthogonal components

Because IcI_c is in phase with the voltage and ImI_m lags the voltage by 90∘90^\circ, they are orthogonal (90∘90^\circ apart in the phasor domain): I0=Ic2+Im2I_0 = \sqrt{I_c^2 + I_m^2}

Substituting the calculated values: I0=(0.0500 A)2+(0.5013 A)2=0.00250+0.25130 A=0.2538 A≈0.504 AI_0 = \sqrt{(0.0500\text{ A})^2 + (0.5013\text{ A})^2} = \sqrt{0.00250 + 0.25130}\text{ A} = \sqrt{0.2538}\text{ A} \approx 0.504\text{ A}

Common Pitfall: Do not simply add IcI_c and ImI_m arithmetically (0.050 A+0.501 A=0.551 A0.050\text{ A} + 0.501\text{ A} = 0.551\text{ A}). Because the magnetizing branch is purely inductive and the core-loss branch is resistive, their branch currents are 90∘90^\circ out of phase and must be added in quadrature (as vectors/phasors).

Typical errors

OverviewACEpath Teacher's Diagnosis

01 The student adds the parallel branch currents algebraically rather than in quadrature via phasors, leading to an overstated total current.

Sample Student Work

Reviewed by ACEpath Teacher
Step-by-Step Review
Walk Through It with Your Teacher
Partially correct
  1. Step 1

    The primary current does not approach zero because the core requires current to establish alternating flux and supply iron losses as excitation current.

  2. Step 2

    Xm=2π(60.0)(12.7)=4788 ΩX_m = 2\pi(60.0)(12.7) = 4788\ \Omega

  3. Step 3

    Im=24004788=0.501 A  ⟹  Ic=240048000=0.050 AI_m = \frac{2400}{4788} = 0.501\text{ A} \implies I_c = \frac{2400}{48000} = 0.050\text{ A}

  4. Step 4

    I0=Ic+Im=0.050+0.501=0.551 AI_0 = I_c + I_m = 0.050 + 0.501 = 0.551\text{ A}

    Correct

    I0=Ic2+Im2=(0.050 A)2+(0.501 A)2≈0.504 AI_0 = \sqrt{I_c^2 + I_m^2} = \sqrt{(0.050\text{ A})^2 + (0.501\text{ A})^2} \approx 0.504\text{ A}

    The core-loss current IcI_c is in phase with the applied voltage, while the magnetizing current ImI_m lags the voltage by 90∘90^\circ. Because these two currents are orthogonal in the phasor plane, their magnitudes must be combined using the Pythagorean relation Ic2+Im2\sqrt{I_c^2 + I_m^2}, not added algebraically.

WHAT YOU DID WELL
Compliments from Your Teacher

You clearly identified both the flux-establishment and core-loss components of the excitation current.

You correctly calculated the magnetizing reactance XmX_m using the supply frequency.

You properly applied Ohm's law to find the individual magnitudes of ImI_m and IcI_c.

THE ERROR
Where Your ACEpath Teacher Spotted the Mistake
Phasor vs. Scalar Addition

none

WHY IT HAPPENED
ACEpath Teacher's Diagnosis

You treated AC branch currents in parallel resistive and inductive branches as scalar algebraic quantities rather than recognizing that they have a 90∘90^\circ phase difference and must be added in quadrature.

REASONING PATH
Your ACEpath teacher’s suggested approach
Orthogonal AC Current Components
  • In an AC parallel circuit, purely resistive current and purely inductive current are 90∘90^\circ out of phase: I⃗=IR−jIL\vec{I} = I_R - jI_L, so ∣I⃗∣=IR2+IL2|\vec{I}| = \sqrt{I_R^2 + I_L^2}.

  • Always draw or write out the phasor relationship before combining branch currents across reactive and resistive elements.

CORRECTED PATH
ACEpath Teacher's Demonstration
  1. Recognize that IcI_c is along the real axis (in phase with voltage) and ImI_m is along the imaginary axis (lagging voltage by 90∘90^\circ): I⃗0=Ic−jIm\vec{I}_0 = I_c - jI_m.

  2. Calculate the magnitude using quadrature addition: I0=Ic2+Im2=0.0502+0.5012 AI_0 = \sqrt{I_c^2 + I_m^2} = \sqrt{0.050^2 + 0.501^2}\text{ A}.

  3. Evaluate: I0=0.0025+0.2510 A=0.2535 A≈0.504 AI_0 = \sqrt{0.0025 + 0.2510}\text{ A} = \sqrt{0.2535}\text{ A} \approx 0.504\text{ A}.

Final answer

0.504 A0.504\text{ A}

NEXT STEPS
Final Takeaways from Your Teacher
  • Review parallel AC phasor diagrams to see why currents in orthogonal branches do not add algebraically.

  • Practice finding total current in parallel R-L circuits using the Pythagorean relationship.

OverviewACEpath Teacher's Diagnosis

02 The student treats the magnetizing inductance and core-loss resistance as connected in series rather than in parallel, computing an incorrect equivalent impedance.

Sample Student Work

Reviewed by ACEpath Teacher
Step-by-Step Review
Walk Through It with Your Teacher
Partially correct
  1. Step 1

    Current must still flow to magnetize the core and cover eddy current and hysteresis losses in the iron core.

  2. Step 2

    Xm=2π(60.0)(12.7)=4788 ΩX_m = 2\pi (60.0)(12.7) = 4788\ \Omega

  3. Step 3

    Z=Rc2+Xm2=480002+47882=48238 ΩZ = \sqrt{R_c^2 + X_m^2} = \sqrt{48000^2 + 4788^2} = 48238\ \Omega

    Correct

    Ic=VpRc=2400 V48 000 Ω=0.0500 AI_c = \frac{V_p}{R_c} = \frac{2400\text{ V}}{48\,000\ \Omega} = 0.0500\text{ A}, Im=VpXm=2400 V4788 Ω≈0.5013 AI_m = \frac{V_p}{X_m} = \frac{2400\text{ V}}{4788\ \Omega} \approx 0.5013\text{ A} (or 1Z=1Rc2+1Xm2\frac{1}{Z} = \sqrt{\frac{1}{R_c^2} + \frac{1}{X_m^2}})

    You used the series impedance formula Z=R2+X2Z = \sqrt{R^2 + X^2}, but the problem specifies that the core-loss resistance RcR_c and magnetizing reactance XmX_m are connected in parallel across the primary voltage.

  4. Step 4

    I0=240048238=0.0498 AI_0 = \frac{2400}{48238} = 0.0498\text{ A}

    Correct

    I0=Ic2+Im2=0.05002+0.50132 A≈0.504 AI_0 = \sqrt{I_c^2 + I_m^2} = \sqrt{0.0500^2 + 0.5013^2}\text{ A} \approx 0.504\text{ A}

    Because the equivalent impedance was calculated using a series model, dividing the supply voltage by this impedance yielded an incorrect no-load current magnitude.

WHAT YOU DID WELL
Compliments from Your Teacher

You clearly explained the physical origins of the excitation current, including both magnetization and core losses.

You correctly calculated the magnetizing reactance Xm=ωLmX_m = \omega L_m.

THE ERROR
Where Your ACEpath Teacher Spotted the Mistake
Series vs Parallel Excitation Branch Misconception

no

WHY IT HAPPENED
ACEpath Teacher's Diagnosis

You applied the series impedance relationship Z=R2+X2Z = \sqrt{R^2 + X^2} to a parallel circuit model. In a transformer excitation branch, RcR_c and XmX_m are in parallel across the primary EMF, meaning the branch currents add in quadrature (I0=Ic2+Im2I_0 = \sqrt{I_c^2 + I_m^2}) rather than sharing the same current in series.

REASONING PATH
Your ACEpath teacher’s suggested approach
Check circuit topology
  • For elements in parallel across a common voltage VV, calculate individual branch currents first: IR=VRI_R = \frac{V}{R} and IX=VXI_X = \frac{V}{X}.

  • Verify whether the problem specifies a parallel or series equivalent circuit before writing down an impedance formula.

Combine parallel AC currents
  • A resistive current is in phase with voltage and an inductive current lags by 90∘90^\circ; total current is I0=IR2+IL2I_0 = \sqrt{I_R^2 + I_L^2}.

  • Add the orthogonal branch currents via the Pythagorean theorem rather than combining resistances and reactances as if they were in series.

CORRECTED PATH
ACEpath Teacher's Demonstration
  1. Calculate the core-loss current: Ic=VpRc=2400 V48 000 Ω=0.0500 AI_c = \frac{V_p}{R_c} = \frac{2400\text{ V}}{48\,000\ \Omega} = 0.0500\text{ A}.

  2. Calculate the magnetizing current: Im=VpXm=2400 V4787.8 Ω≈0.5013 AI_m = \frac{V_p}{X_m} = \frac{2400\text{ V}}{4787.8\ \Omega} \approx 0.5013\text{ A}.

  3. Combine the two orthogonal phasor currents in quadrature: I0=Ic2+Im2=(0.0500 A)2+(0.5013 A)2≈0.504 AI_0 = \sqrt{I_c^2 + I_m^2} = \sqrt{(0.0500\text{ A})^2 + (0.5013\text{ A})^2} \approx 0.504\text{ A}.

Final answer

I0≈0.504 AI_0 \approx 0.504\text{ A}

NEXT STEPS
Final Takeaways from Your Teacher
  • Review the parallel equivalent circuit diagram of a real transformer excitation branch.

  • Practice finding total current in parallel RL AC circuits by computing branch currents before combining them.

  • Work through the flashcards below to solidify the difference between series and parallel phasor addition.

OverviewACEpath Teacher's Diagnosis

03 The student uses the inductance directly in place of inductive reactance when computing current, omitting the angular frequency factor 2πf.

Sample Student Work

Reviewed by ACEpath Teacher
Step-by-Step Review
Walk Through It with Your Teacher
Partially correct
  1. Step 1

    The primary still draws current to produce the magnetic field in the core and provide power for core losses.

  2. Step 2

    Im=240012.7=189.0 AI_m = \frac{2400}{12.7} = 189.0\text{ A}

    Correct

    Xm=2πfLm=2π(60.0 Hz)(12.7 H)≈4788 Ω  ⟹  Im=VpXm=2400 V4788 Ω≈0.501 AX_m = 2\pi f L_m = 2\pi(60.0\text{ Hz})(12.7\text{ H}) \approx 4788\ \Omega \implies I_m = \frac{V_p}{X_m} = \frac{2400\text{ V}}{4788\ \Omega} \approx 0.501\text{ A}

    You divided the voltage by the inductance LmL_m (in henries) rather than the inductive reactance Xm=ωLm=2πfLmX_m = \omega L_m = 2\pi f L_m (in ohms). In AC steady state, opposition to current through an inductor is given by its reactance XmX_m, not its inductance alone.

  3. Step 3

    Ic=240048000=0.050 AI_c = \frac{2400}{48000} = 0.050\text{ A}

  4. Step 4

    I0=189.02+0.0502=189.0 AI_0 = \sqrt{189.0^2 + 0.050^2} = 189.0\text{ A}

    Correct

    I0=Ic2+Im2=(0.0500 A)2+(0.5013 A)2≈0.504 AI_0 = \sqrt{I_c^2 + I_m^2} = \sqrt{(0.0500\text{ A})^2 + (0.5013\text{ A})^2} \approx 0.504\text{ A}

    Your phasor combination method was completely sound, but your numerical answer was skewed by the earlier value of ImI_m.

WHAT YOU DID WELL
Compliments from Your Teacher

You provided a concise and accurate physical explanation for part (a).

You correctly calculated the core-loss current IcI_c across the shunt resistance.

You recognized that IcI_c and ImI_m are 90∘90^\circ out of phase and must be summed in quadrature.

THE ERROR
Where Your ACEpath Teacher Spotted the Mistake
Omission of Angular Frequency in Reactance

You treated inductance LL as if it were an impedance in ohms rather than calculating inductive reactance XL=ωLX_L = \omega L.

WHY IT HAPPENED
ACEpath Teacher's Diagnosis

Confusing an inductor's physical property (inductance LL, measured in henries H\text{H}) with its AC circuit opposition (inductive reactance XL=2πfLX_L = 2\pi f L, measured in ohms Ω\Omega).

REASONING PATH
Your ACEpath teacher’s suggested approach
Reactance vs. Inductance
  • Ohm's law for an AC inductor requires impedance or reactance: IL=VXLI_L = \frac{V}{X_L}, where XL=ωL=2πfLX_L = \omega L = 2\pi f L.

  • Always convert inductance LL (in H\text{H}) to reactance XLX_L (in Ω\Omega) by multiplying by ω=2πf\omega = 2\pi f before dividing into AC voltage.

Unit Dimensionality Check
  • Current has dimensions of VoltsOhms\frac{\text{Volts}}{\text{Ohms}}, not VoltsHenries\frac{\text{Volts}}{\text{Henries}}.

  • Check that the denominator carries units of ohms (Ω\Omega) to ensure dimensional consistency.

CORRECTED PATH
ACEpath Teacher's Demonstration
  1. Calculate angular frequency: ω=2π(60.0 s−1)≈377.0 rad/s\omega = 2\pi(60.0\text{ s}^{-1}) \approx 377.0\text{ rad/s}.

  2. Calculate magnetizing reactance: Xm=ωLm=(377.0 rad/s)(12.7 H)≈4788 ΩX_m = \omega L_m = (377.0\text{ rad/s})(12.7\text{ H}) \approx 4788\ \Omega.

  3. Calculate magnetizing current: Im=2400 V4788 Ω≈0.5013 AI_m = \frac{2400\text{ V}}{4788\ \Omega} \approx 0.5013\text{ A}.

  4. Combine orthogonal components: I0=Ic2+Im2=(0.0500 A)2+(0.5013 A)2≈0.504 AI_0 = \sqrt{I_c^2 + I_m^2} = \sqrt{(0.0500\text{ A})^2 + (0.5013\text{ A})^2} \approx 0.504\text{ A}.

Final answer

I0≈0.504 AI_0 \approx 0.504\text{ A}

NEXT STEPS
Final Takeaways from Your Teacher
  • Review the formula for inductive reactance XL=2πfLX_L = 2\pi f L and practice checking dimensional units whenever an inductance is given.

  • Solve additional problems involving parallel excitation branches in transformers to reinforce phasor addition.

Lock it in

Similar question

01

A 120 V (rms)120\text{ V (rms)}, 60 Hz60\text{ Hz} supply feeds a parallel circuit consisting of a 60 Ω60\ \Omega resistor and an inductor with reactance XL=80 ΩX_L = 80\ \Omega. Compute the total rms current drawn from the source.

Answer

2.5 A2.5\text{ A}. First find the branch currents: IR=120 V60 Ω=2.0 AI_R = \frac{120\text{ V}}{60\ \Omega} = 2.0\text{ A} and IL=120 V80 Ω=1.5 AI_L = \frac{120\text{ V}}{80\ \Omega} = 1.5\text{ A}. Because the currents are 90∘90^\circ apart, combine them in quadrature: I=2.02+1.52=4.0+2.25=6.25=2.5 AI = \sqrt{2.0^2 + 1.5^2} = \sqrt{4.0 + 2.25} = \sqrt{6.25} = 2.5\text{ A}.

02

A real transformer has an open-circuit secondary. The core-loss current is measured as Ic=0.12 AI_c = 0.12\text{ A}, and the total excitation current drawn is I0=0.37 AI_0 = 0.37\text{ A}. Find the magnetizing current ImI_m and the power factor of this no-load transformer.

Answer

Im≈0.35 AI_m \approx 0.35\text{ A}, PF≈0.324\text{PF} \approx 0.324 lagging. Since I0=Ic2+Im2I_0 = \sqrt{I_c^2 + I_m^2}, solve for Im=I02−Ic2=0.372−0.122=0.1369−0.0144=0.1225=0.35 AI_m = \sqrt{I_0^2 - I_c^2} = \sqrt{0.37^2 - 0.12^2} = \sqrt{0.1369 - 0.0144} = \sqrt{0.1225} = 0.35\text{ A}. The power factor is cos⁡ϕ=IcI0=0.120.37≈0.324\cos\phi = \frac{I_c}{I_0} = \frac{0.12}{0.37} \approx 0.324 lagging.

03

A step-down transformer connected to a 480 V (rms)480\text{ V (rms)}, 50 Hz50\text{ Hz} supply has a no-load primary current of 0.80 A0.80\text{ A} with a no-load power dissipation (core loss) of 96 W96\text{ W}. Determine the values of the equivalent parallel core-loss resistance RcR_c and magnetizing inductance LmL_m.

Answer

Rc=2400 ΩR_c = 2400\ \Omega, Lm≈1.96 HL_m \approx 1.96\text{ H}. Core-loss current is Ic=PcoreVp=96 W480 V=0.20 AI_c = \frac{P_{\text{core}}}{V_p} = \frac{96\text{ W}}{480\text{ V}} = 0.20\text{ A}, giving Rc=VpIc=480 V0.20 A=2400 ΩR_c = \frac{V_p}{I_c} = \frac{480\text{ V}}{0.20\text{ A}} = 2400\ \Omega. The magnetizing current is Im=I02−Ic2=0.802−0.202=0.60≈0.7746 AI_m = \sqrt{I_0^2 - I_c^2} = \sqrt{0.80^2 - 0.20^2} = \sqrt{0.60} \approx 0.7746\text{ A}. Magnetizing reactance is Xm=480 V0.7746 A≈619.7 ΩX_m = \frac{480\text{ V}}{0.7746\text{ A}} \approx 619.7\ \Omega. Thus, Lm=Xm2πf=619.72π(50)≈1.96 HL_m = \frac{X_m}{2\pi f} = \frac{619.7}{2\pi(50)} \approx 1.96\text{ H}.

Loading workspace…