Resources

An aircraft cruising horizontally at a ground speed of vplane=324 km/hv_{\text{plane}} = 324\text{ km/h} at an altitude of H=750 mH = 750\text{ m} releases an emergency supply crate into an open field. At the moment of release, an atmospheric crosswind imparts a steady downward vertical gust of wy=−18.0 km/hw_y = -18.0\text{ km/h} to the crate. Convert all initial velocities to SI units (m/s\text{m/s}), establish the initial velocity components (v0xv_{0x} and v0yv_{0y}), and calculate the vertical velocity component vyv_y of the crate when it reaches the ground. Neglect horizontal air resistance and take g=9.80 m/s2g = 9.80\text{ m/s}^2.

Answer and steps

Final answer

v0x=90.0 m/sv_{0x} = 90.0\text{ m/s}, v0y=−5.00 m/sv_{0y} = -5.00\text{ m/s}, vy=−121 m/sv_y = -121\text{ m/s}

Steps

01

Convert Initial Velocities to SI Units

To convert velocities from kilometers per hour (km/h\text{km/h}) to meters per second (m/s\text{m/s}), divide by 3.63.6:

vplane=324 km/h3.6=90.0 m/sv_{\text{plane}} = \frac{324\text{ km/h}}{3.6} = 90.0\text{ m/s}

wy=−18.0 km/h3.6=−5.00 m/sw_y = \frac{-18.0\text{ km/h}}{3.6} = -5.00\text{ m/s}


02

Establish the Initial Velocity Components

Define a standard Cartesian coordinate system where the positive xx-axis points in the forward horizontal direction and the positive yy-axis points vertically upward.

  • Horizontal initial velocity (v0xv_{0x}): The crate inherits the horizontal forward velocity of the aircraft: v0x=90.0 m/sv_{0x} = 90.0\text{ m/s}
  • Vertical initial velocity (v0yv_{0y}): The downward gust imparts an initial downward velocity: v0y=−5.00 m/sv_{0y} = -5.00\text{ m/s}

03

Calculate the Final Vertical Velocity (vyv_y)

Because horizontal and vertical motions are completely independent, the vertical velocity can be analyzed purely in the yy-direction:

  • Initial position: y0=750 my_0 = 750\text{ m}
  • Final position at the ground: y=0 my = 0\text{ m}
  • Vertical displacement: Δy=y−y0=−750 m\Delta y = y - y_0 = -750\text{ m}
  • Vertical acceleration: ay=−g=−9.80 m/s2a_y = -g = -9.80\text{ m/s}^2

Use the kinematic equation relating velocity, acceleration, and displacement:

vy2=v0y2+2ayΔyv_y^2 = v_{0y}^2 + 2 a_y \Delta y

Substitute the known values:

vy2=(−5.00 m/s)2+2(−9.80 m/s2)(−750 m)v_y^2 = (-5.00\text{ m/s})^2 + 2(-9.80\text{ m/s}^2)(-750\text{ m})

vy2=25.0+14700=14725 m2/s2v_y^2 = 25.0 + 14700 = 14725\text{ m}^2/\text{s}^2

Taking the square root:

∣vy∣=14725≈121.35 m/s|v_y| = \sqrt{14725} \approx 121.35\text{ m/s}

Since the crate is moving downward as it impacts the ground, the vertical component is negative:

vy=−121 m/s(to three significant figures)v_y = -121\text{ m/s}\quad\text{(to three significant figures)}

Typical errors

OverviewACEpath Teacher's Diagnosis

01 The student ignores the initial downward gust velocity v0y, assuming the crate has zero initial vertical velocity.

Sample Student Work

Reviewed by ACEpath Teacher
Step-by-Step Review
Walk Through It with Your Teacher
Partially correct
  1. Step 1

    v0x=3243.6=90.0 m/sv_{0x} = \frac{324}{3.6} = 90.0\text{ m/s}

  2. Step 2

    v0y=0 m/sv_{0y} = 0\text{ m/s}

    Correct

    v0y=−18.0 km/h3.6=−5.00 m/sv_{0y} = \frac{-18.0\text{ km/h}}{3.6} = -5.00\text{ m/s}

    The problem states that a steady downward vertical gust of −18.0 km/h-18.0\text{ km/h} acts on the crate at the moment of release. Converting this gives an initial vertical velocity of v0y=−5.00 m/sv_{0y} = -5.00\text{ m/s}, not 0 m/s0\text{ m/s}.

  3. Step 3

    vy2=2∗g∗H  ⟹  vy2=2∗9.80∗750=14700 m2/s2v_y^2 = 2 * g * H \implies v_y^2 = 2 * 9.80 * 750 = 14700\text{ m}^2/\text{s}^2

    Correct

    vy2=v0y2+2(−g)Δy=(−5.00 m/s)2+2(−9.80 m/s2)(−750 m)=14725 m2/s2v_y^2 = v_{0y}^2 + 2(-g)\Delta y = (-5.00\text{ m/s})^2 + 2(-9.80\text{ m/s}^2)(-750\text{ m}) = 14725\text{ m}^2/\text{s}^2

    Because you set v0y=0 m/sv_{0y} = 0\text{ m/s}, the kinematic formula vy2=v0y2+2ayΔyv_y^2 = v_{0y}^2 + 2a_y\Delta y missed the initial kinetic energy term v0y2=(−5.00)2=25.0 m2/s2v_{0y}^2 = (-5.00)^2 = 25.0\text{ m}^2/\text{s}^2.

  4. Step 4

    vy=−14700≈−121.24 m/sv_y = -\sqrt{14700} \approx -121.24\text{ m/s}

    Correct

    vy=−14725≈−121 m/sv_y = -\sqrt{14725} \approx -121\text{ m/s}

    You correctly chose the negative root for downward motion, but the numerical value is slightly off due to the missing initial vertical speed.

WHAT YOU DID WELL
Compliments from Your Teacher

You accurately converted km/h\text{km/h} to m/s\text{m/s} using the factor of 3.63.6.

You selected the appropriate kinematic relation connecting displacement, acceleration, and velocity.

You correctly assigned a negative sign to the final downward vertical velocity.

THE ERROR
Where Your ACEpath Teacher Spotted the Mistake
Initial Condition Omission

You treated the drop as a standard horizontal release from rest vertically, overlooking the gust mentioned in the prompt.

WHY IT HAPPENED
ACEpath Teacher's Diagnosis

Defaulting to the prototype horizontal-projectile template (v0y=0v_{0y} = 0) without checking for non-zero vertical initial conditions specified in the problem statement.

REASONING PATH
Your ACEpath teacher’s suggested approach
Initial Velocity Decomposition
  • Every initial velocity component must be explicitly checked: v0x=vobject,x+vwind,xv_{0x} = v_{\text{object}, x} + v_{\text{wind}, x} and v0y=vobject,y+vwind,yv_{0y} = v_{\text{object}, y} + v_{\text{wind}, y}.

  • Scan the problem text for phrases like 'gust', 'launch angle', or 'thrown downward' before assuming v0y=0v_{0y} = 0.

Full Kinematic Equation
  • For constant vertical acceleration: vy2=v0y2+2ayΔyv_y^2 = v_{0y}^2 + 2a_y\Delta y.

  • Always write out v0y2v_{0y}^2 explicitly in the formula before deciding whether it equals zero.

CORRECTED PATH
ACEpath Teacher's Demonstration
  1. Include the vertical gust in the initial conditions: v0y=−18.0 km/h3.6=−5.00 m/sv_{0y} = \frac{-18.0\text{ km/h}}{3.6} = -5.00\text{ m/s}.

  2. Substitute v0yv_{0y} into the kinematic relation: vy2=(−5.00 m/s)2+2(−9.80 m/s2)(−750 m)=25.0+14700=14725 m2/s2v_y^2 = (-5.00\text{ m/s})^2 + 2(-9.80\text{ m/s}^2)(-750\text{ m}) = 25.0 + 14700 = 14725\text{ m}^2/\text{s}^2.

  3. Take the square root with a negative sign to indicate downward motion: vy=−14725≈−121 m/sv_y = -\sqrt{14725} \approx -121\text{ m/s}.

Final answer

v0x=90.0 m/sv_{0x} = 90.0\text{ m/s}, v0y=−5.00 m/sv_{0y} = -5.00\text{ m/s}, vy=−121 m/sv_y = -121\text{ m/s}

NEXT STEPS
Final Takeaways from Your Teacher
  • Review problems where projectiles are launched with an initial non-zero vertical component (angles above or below the horizontal).

  • Practice identifying external initial velocity contributions such as wind gusts or moving launch platforms.

OverviewACEpath Teacher's Diagnosis

02 The student multiplies by 3.6 instead of dividing by 3.6 when converting km/h to m/s.

Sample Student Work

Reviewed by ACEpath Teacher
Step-by-Step Review
Walk Through It with Your Teacher
Incorrect
  1. Step 1

    v0x=324∗3.6=1166.4 m/sv_{0x} = 324 * 3.6 = 1166.4\text{ m/s} ⟹ v0y=−18.0∗3.6=−64.8 m/sv_{0y} = -18.0 * 3.6 = -64.8\text{ m/s}

    Correct

    v0x=324 km/h3.6=90.0 m/sv_{0x} = \frac{324\text{ km/h}}{3.6} = 90.0\text{ m/s} ⟹ v0y=−18.0 km/h3.6=−5.00 m/sv_{0y} = \frac{-18.0\text{ km/h}}{3.6} = -5.00\text{ m/s}

    To convert from kilometers per hour to meters per second, you must divide by 3.63.6 because 1 km=1000 m1\text{ km} = 1000\text{ m} and 1 h=3600 s1\text{ h} = 3600\text{ s}, which gives 10003600=13.6\frac{1000}{3600} = \frac{1}{3.6}. You multiplied by 3.63.6 instead.

  2. Step 2

    vy2=v0y2+2∗g∗Hv_y^2 = v_{0y}^2 + 2 * g * H ⟹ vy2=(−64.8)2+2∗9.80∗750v_y^2 = (-64.8)^2 + 2 * 9.80 * 750 ⟹ vy2=4199.04+14700=18899.04 m2/s2v_y^2 = 4199.04 + 14700 = 18899.04\text{ m}^2/\text{s}^2

    Correct

    vy2=(−5.00 m/s)2+2(9.80 m/s2)(750 m)=25.0+14700=14725 m2/s2v_y^2 = (-5.00\text{ m/s})^2 + 2(9.80\text{ m/s}^2)(750\text{ m}) = 25.0 + 14700 = 14725\text{ m}^2/\text{s}^2

    Your kinematic formula and algebraic evaluation are mathematically sound, but this step carries over the incorrect value of v0yv_{0y} from the unit conversion error.

  3. Step 3

    vy=−18899.04≈−137.47 m/sv_y = -\sqrt{18899.04} \approx -137.47\text{ m/s}

    Correct

    vy=−14725 m2/s2≈−121 m/sv_y = -\sqrt{14725\text{ m}^2/\text{s}^2} \approx -121\text{ m/s}

    You correctly recognized that the downward motion requires the negative square root, but the numerical answer is incorrect due to the propagated conversion error.

WHAT YOU DID WELL
Compliments from Your Teacher

You correctly isolated the vertical component to determine the vertical velocity.

You selected the appropriate kinematic formula relating velocities, acceleration, and displacement.

You correctly chose the negative sign for the final vertical velocity to indicate downward direction.

THE ERROR
Where Your ACEpath Teacher Spotted the Mistake
Unit Conversion Inversion

no

WHY IT HAPPENED
ACEpath Teacher's Diagnosis

You inverted the conversion factor between kilometers per hour and meters per second by multiplying by 3.63.6 rather than dividing by 3.63.6.

REASONING PATH
Your ACEpath teacher’s suggested approach
Speed Unit Conversion
  • 1 km/h=1000 m3600 s=13.6 m/s1\text{ km/h} = \frac{1000\text{ m}}{3600\text{ s}} = \frac{1}{3.6}\text{ m/s}

  • Divide the speed in km/h\text{km/h} by 3.63.6 to obtain m/s\text{m/s}, and multiply by 3.63.6 when converting from m/s\text{m/s} to km/h\text{km/h}.

CORRECTED PATH
ACEpath Teacher's Demonstration
  1. Convert velocities by dividing by 3.63.6: v0x=3243.6=90.0 m/sv_{0x} = \frac{324}{3.6} = 90.0\text{ m/s} and v0y=−18.03.6=−5.00 m/sv_{0y} = \frac{-18.0}{3.6} = -5.00\text{ m/s}.

  2. Substitute v0y=−5.00 m/sv_{0y} = -5.00\text{ m/s} into the vertical kinematic equation: vy2=(−5.00)2+2(9.80)(750)=25.0+14700=14725 m2/s2v_y^2 = (-5.00)^2 + 2(9.80)(750) = 25.0 + 14700 = 14725\text{ m}^2/\text{s}^2.

  3. Take the negative root for downward motion: vy=−14725≈−121 m/sv_y = -\sqrt{14725} \approx -121\text{ m/s}.

Final answer

v0x=90.0 m/sv_{0x} = 90.0\text{ m/s}, v0y=−5.00 m/sv_{0y} = -5.00\text{ m/s}, vy=−121 m/sv_y = -121\text{ m/s}

NEXT STEPS
Final Takeaways from Your Teacher
  • Always write out the dimensional fractions 1000 m1 km×1 h3600 s\frac{1000\text{ m}}{1\text{ km}} \times \frac{1\text{ h}}{3600\text{ s}} when converting speeds to ensure units cancel correctly.

  • Perform a quick sanity check: the numerical value in m/s\text{m/s} should always be smaller than the numerical value in km/h\text{km/h}.

OverviewACEpath Teacher's Diagnosis

03 The student confuses horizontal and vertical velocity components and uses the horizontal velocity v0x in the vertical kinematic equation.

Sample Student Work

Reviewed by ACEpath Teacher
Step-by-Step Review
Walk Through It with Your Teacher
Partially correct
  1. Step 1

    v0x=3243.6=90.0 m/s  ⟹  v0y=−18.03.6=−5.00 m/sv_{0x} = \frac{324}{3.6} = 90.0\text{ m/s} \implies v_{0y} = \frac{-18.0}{3.6} = -5.00\text{ m/s}

  2. Step 2

    vy2=v0x2+2⋅g⋅H  ⟹  vy2=90.02+2⋅9.80⋅750  ⟹  vy2=8100+14700=22800 m2/s2v_y^2 = v_{0x}^2 + 2 \cdot g \cdot H \implies v_y^2 = 90.0^2 + 2 \cdot 9.80 \cdot 750 \implies v_y^2 = 8100 + 14700 = 22800\text{ m}^2/\text{s}^2

    Correct

    vy2=v0y2+2gH=(−5.00)2+2(9.80)(750)=25.0+14700=14725 m2/s2v_y^2 = v_{0y}^2 + 2gH = (-5.00)^2 + 2(9.80)(750) = 25.0 + 14700 = 14725\text{ m}^2/\text{s}^2

    You mixed horizontal and vertical components by placing v0xv_{0x} into the vertical motion equation. Horizontal and vertical motions are independent, so the vertical equation must use v0y=−5.00 m/sv_{0y} = -5.00\text{ m/s}.

  3. Step 3

    vy=−22800≈−151.00 m/sv_y = -\sqrt{22800} \approx -151.00\text{ m/s}

    Correct

    vy=−14725≈−121 m/sv_y = -\sqrt{14725} \approx -121\text{ m/s}

    You correctly assigned the negative sign for downward motion and evaluated the square root, but the numerical result was affected by using v0xv_{0x} in the previous step.

WHAT YOU DID WELL
Compliments from Your Teacher

You correctly converted kilometers per hour to meters per second by dividing by 3.63.6.

You correctly identified that the crate is moving downward upon landing and assigned a negative sign to vyv_y.

THE ERROR
Where Your ACEpath Teacher Spotted the Mistake
Component Confusion in 2D Kinematics

no

WHY IT HAPPENED
ACEpath Teacher's Diagnosis

You treated the horizontal velocity v0xv_{0x} as the initial vertical speed in the vertical kinematic equation, overlooking the independence of perpendicular kinematic components.

REASONING PATH
Your ACEpath teacher’s suggested approach
Independence of Axes
  • Every kinematic equation must use quantities belonging strictly to a single axis: vy2=v0y2+2ayΔyv_y^2 = v_{0y}^2 + 2 a_y \Delta y, never mixing xx and yy variables.

  • Before writing an equation, write the axis label (xx or yy) beside it and check that every subscript matches that axis.

CORRECTED PATH
ACEpath Teacher's Demonstration
  1. Apply the kinematic formula strictly along the vertical (yy) axis: vy2=v0y2+2ayΔyv_y^2 = v_{0y}^2 + 2 a_y \Delta y.

  2. Substitute the vertical values: vy2=(−5.00 m/s)2+2(−9.80 m/s2)(−750 m)=25.0+14700=14725 m2/s2v_y^2 = (-5.00\text{ m/s})^2 + 2(-9.80\text{ m/s}^2)(-750\text{ m}) = 25.0 + 14700 = 14725\text{ m}^2/\text{s}^2.

  3. Take the square root and apply the downward direction: vy=−14725≈−121 m/sv_y = -\sqrt{14725} \approx -121\text{ m/s}.

Final answer

vy=−121 m/sv_y = -121\text{ m/s}

NEXT STEPS
Final Takeaways from Your Teacher
  • Organize your known kinematic variables into two distinct columns (xx-axis and yy-axis) before choosing an equation.

  • Verify that every term in your kinematic equation shares the same coordinate subscript (xx or yy).

Lock it in

Similar question

01

A drone flying horizontally at 15 m/s15\text{ m/s} at an altitude of 80.0 m80.0\text{ m} releases a sensor. A downward wind imparts an initial vertical speed of 4.0 m/s4.0\text{ m/s} downward (v0y=−4.0 m/sv_{0y} = -4.0\text{ m/s}). Taking g=9.80 m/s2g = 9.80\text{ m/s}^2, calculate the vertical velocity component vyv_y upon impact.

Answer

vy=−39.8 m/sv_y = -39.8\text{ m/s}. Use vy2=v0y2+2(−g)Δy=(−4.0)2+2(−9.80)(−80.0)=16+1568=1584 m2/s2v_y^2 = v_{0y}^2 + 2(-g)\Delta y = (-4.0)^2 + 2(-9.80)(-80.0) = 16 + 1568 = 1584\text{ m}^2/\text{s}^2. Then vy=−1584≈−39.8 m/sv_y = -\sqrt{1584} \approx -39.8\text{ m/s}.

02

A helicopter hovers at an altitude of 120 m120\text{ m} while descending vertically at 6.0 m/s6.0\text{ m/s}. It launches a flare horizontally forward at 25 m/s25\text{ m/s}. Find the components of the initial velocity (v0x,v0y)(v_{0x}, v_{0y}) and the flare's final vertical velocity vyv_y just before hitting the ground (g=9.80 m/s2g = 9.80\text{ m/s}^2).

Answer

v0x=25 m/sv_{0x} = 25\text{ m/s}, v0y=−6.0 m/sv_{0y} = -6.0\text{ m/s}, and vy=−48.9 m/sv_y = -48.9\text{ m/s}. The descending helicopter imparts v0y=−6.0 m/sv_{0y} = -6.0\text{ m/s}. Then vy2=(−6.0)2+2(−9.80)(−120)=36+2352=2388 m2/s2v_y^2 = (-6.0)^2 + 2(-9.80)(-120) = 36 + 2352 = 2388\text{ m}^2/\text{s}^2, giving vy=−2388≈−48.9 m/sv_y = -\sqrt{2388} \approx -48.9\text{ m/s}.

03

A supply package is dropped from an altitude H=500 mH = 500\text{ m} from an aircraft moving at angle 30.0∘30.0^\circ below the horizontal at a total speed of 72.0 m/s72.0\text{ m/s}. Determine v0xv_{0x}, v0yv_{0y}, and the final vertical velocity vyv_y at the ground (g=9.80 m/s2g = 9.80\text{ m/s}^2).

Answer

v0x=62.4 m/sv_{0x} = 62.4\text{ m/s}, v0y=−36.0 m/sv_{0y} = -36.0\text{ m/s}, and vy=−105 m/sv_y = -105\text{ m/s}. Resolve initial velocities: v0x=72.0cos⁡(30.0∘)≈62.4 m/sv_{0x} = 72.0\cos(30.0^\circ) \approx 62.4\text{ m/s}, v0y=−72.0sin⁡(30.0∘)=−36.0 m/sv_{0y} = -72.0\sin(30.0^\circ) = -36.0\text{ m/s}. Then vy2=(−36.0)2+2(−9.80)(−500)=1296+9800=11096 m2/s2v_y^2 = (-36.0)^2 + 2(-9.80)(-500) = 1296 + 9800 = 11096\text{ m}^2/\text{s}^2, yielding vy=−11096≈−105 m/sv_y = -\sqrt{11096} \approx -105\text{ m/s}.

Loading workspace…