Resources

A crate with a mass of m=18.0 kgm = 18.0\text{ kg} is pulled from rest along a horizontal concrete floor by a constant horizontal pulling force of F=85.0 NF = 85.0\text{ N}. A constant kinetic friction force opposes the motion with a coefficient of kinetic friction μk=0.280\mu_k = 0.280. Using the Work-Energy Theorem and taking the acceleration due to gravity as g=9.80 m/s2g = 9.80\text{ m/s}^2, calculate the final speed vfv_f of the crate after it has displaced a distance of d=6.50 md = 6.50\text{ m}.

Answer and steps

Final answer

vf=5.07 m/sv_f = 5.07\text{ m/s}

Steps

01

State the Work-Energy Theorem

The Work-Energy Theorem states that the net work done on an object by all forces acting on it is equal to the change in its kinetic energy:

Wnet=ΔK=Kf−KiW_{\text{net}} = \Delta K = K_f - K_i

Since the crate starts from rest, its initial kinetic energy is zero (Ki=0K_i = 0):

Wnet=12mvf2W_{\text{net}} = \frac{1}{2}mv_f^2


02

Determine the Normal Force and Friction Force

The crate moves horizontally, so there is no vertical acceleration (ay=0a_y = 0). Balancing forces in the vertical direction gives:

FN−mg=0  ⟹  FN=mgF_N - mg = 0 \implies F_N = mg

Substitute the given values:

FN=(18.0 kg)(9.80 m/s2)=176.4 NF_N = (18.0\text{ kg})(9.80\text{ m/s}^2) = 176.4\text{ N}

The magnitude of the kinetic friction force fkf_k opposing the motion is:

fk=μkFN=0.280⋅176.4 N=49.392 Nf_k = \mu_k F_N = 0.280 \cdot 176.4\text{ N} = 49.392\text{ N}


03

Calculate the Net Work Done

The normal force FNF_N and the gravitational force mgmg act perpendicular to the displacement (90∘90^\circ), so they perform zero work.

The net horizontal force in the direction of motion is:

Fnet=F−fk=85.0 N−49.392 N=35.608 NF_{\text{net}} = F - f_k = 85.0\text{ N} - 49.392\text{ N} = 35.608\text{ N}

The net work done over the displacement d=6.50 md = 6.50\text{ m} is:

Wnet=Fnet⋅d=(35.608 N)(6.50 m)=231.452 JW_{\text{net}} = F_{\text{net}} \cdot d = (35.608\text{ N})(6.50\text{ m}) = 231.452\text{ J}

Common Pitfall: Be careful with signs when calculating work individually. The applied force does positive work (WF=F⋅dW_F = F \cdot d), while friction acts opposite to the displacement and does negative work (Wf=−fk⋅dW_f = -f_k \cdot d). Summing them gives the same net work: Wnet=WF+WfW_{\text{net}} = W_F + W_f.


04

Solve for the Final Speed vfv_f

Using the Work-Energy Theorem:

231.452 J=12(18.0 kg)vf2231.452\text{ J} = \frac{1}{2}(18.0\text{ kg})v_f^2

231.452=9.00⋅vf2231.452 = 9.00 \cdot v_f^2

vf2=231.4529.00≈25.717 m2/s2v_f^2 = \frac{231.452}{9.00} \approx 25.717\text{ m}^2/\text{s}^2

vf=25.717≈5.07 m/sv_f = \sqrt{25.717} \approx 5.07\text{ m/s}

Typical errors

OverviewACEpath Teacher's Diagnosis

01 The student ignores the opposing friction force and calculates the work done using only the applied pulling force, resulting in an overstated final speed of 7.83 m/s.

Sample Student Work

Reviewed by ACEpath Teacher
Step-by-Step Review
Walk Through It with Your Teacher
Incorrect
  1. Step 1

    W = Fd = (85.0 N\text{ N})(6.50 m\text{ m}) = 552.5 J\text{ J}

    Correct

    W_{net\text{net}} = (F - f_k)d = [85.0 N\text{ N} - (0.280)(18.0 kg\text{ kg})(9.80 m/s\text{ m/s}^2)](6.50 m\text{ m}) ≈\approx 231.45 J\text{ J}_

    The Work-Energy Theorem requires the net work WnetW_{\text{net}} done by all forces acting along the line of motion. Because kinetic friction opposes the pull, you must subtract the work done by friction (or find the net horizontal force Fnet=F−fkF_{\text{net}} = F - f_k) before multiplying by displacement.

  2. Step 2

    W = 12\frac{1}{2} m v_f^2   ⟹  \implies 552.5 = 12\frac{1}{2}(18.0) v_f^2   ⟹  \implies 552.5 = 9.00 v_f^2   ⟹  \implies v_f^2 = 61.39   ⟹  \implies v_f = 7.83 m/s\text{ m/s}

    Correct

    W_{net\text{net}} = 12\frac{1}{2} m v_f^2   ⟹  \implies 231.45 = 9.00 v_f^2   ⟹  \implies v_f = 231.459.00\sqrt{\frac{231.45}{9.00}} ≈\approx 5.07 m/s\text{ m/s}_

    Your algebraic method of equating work to kinetic energy and solving for vfv_f was carried out correctly, but the resulting speed is overstated because it inherited the incorrect work value from Step 1.

WHAT YOU DID WELL
Compliments from Your Teacher

You correctly identified that the change in kinetic energy from rest is given by ΔK=12mvf2\Delta K = \frac{1}{2}mv_f^2.

You executed the algebraic steps to isolate and solve for vfv_f cleanly and without arithmetic errors.

THE ERROR
Where Your ACEpath Teacher Spotted the Mistake
Omission of Friction in Net Work

You used only the applied pulling force FF to find the work done rather than finding the net force or summing all individual work contributions.

WHY IT HAPPENED
ACEpath Teacher's Diagnosis

Confusing the work done by a single applied force (WFW_F) with the net work (WnetW_{\text{net}}) required by the Work-Energy Theorem when resistive forces like friction are present.

REASONING PATH
Your ACEpath teacher’s suggested approach
Check all forces along the axis of motion
  • Wnet=∑Wi=FnetdW_{\text{net}} = \sum W_i = F_{\text{net}} d

  • Draw a quick free-body diagram to check whether friction or other opposing forces act along the displacement.

Calculate kinetic friction from the normal force
  • f_k = μ\mu_k F_N = μ\mu_k m g  (on a horizontal surface)\text{ (on a horizontal surface)}

  • Ensure the normal force is balanced vertically before calculating friction, then include fkf_k opposing the motion.

CORRECTED PATH
ACEpath Teacher's Demonstration
  1. Find the magnitude of kinetic friction: fk=μkmg=(0.280)(18.0 kg)(9.80 m/s2)=49.392 Nf_k = \mu_k m g = (0.280)(18.0\text{ kg})(9.80\text{ m/s}^2) = 49.392\text{ N}.

  2. Find the net horizontal force: Fnet=F−fk=85.0 N−49.392 N=35.608 NF_{\text{net}} = F - f_k = 85.0\text{ N} - 49.392\text{ N} = 35.608\text{ N}.

  3. Calculate net work: Wnet=Fnetd=(35.608 N)(6.50 m)=231.452 JW_{\text{net}} = F_{\text{net}} d = (35.608\text{ N})(6.50\text{ m}) = 231.452\text{ J}.

  4. Apply the Work-Energy Theorem: 231.452 J=12(18.0 kg)vf2=9.00vf2231.452\text{ J} = \frac{1}{2}(18.0\text{ kg})v_f^2 = 9.00 v_f^2.

  5. Solve for final speed: vf=231.4529.00≈5.07 m/sv_f = \sqrt{\frac{231.452}{9.00}} \approx 5.07\text{ m/s}.

Final answer

v_f ≈\approx 5.07 m/s\text{ m/s}

NEXT STEPS
Final Takeaways from Your Teacher
  • Practice drawing free-body diagrams before writing work equations to guarantee no non-conservative forces are missed.

  • Solve problems where both an applied force and friction act simultaneously to reinforce the habit of finding WnetW_{\text{net}}.

OverviewACEpath Teacher's Diagnosis

02 The student adds friction to the applied force instead of subtracting it when finding net force and net work, leading to an incorrect final speed of 9.85 m/s.

Sample Student Work

Reviewed by ACEpath Teacher
Step-by-Step Review
Walk Through It with Your Teacher
Incorrect
  1. Step 1

    N=mg=(18.0)(9.8)=176.4 N  ⟹  fk=μkN=0.280(176.4)=49.392 NN = mg = (18.0)(9.8) = 176.4\text{ N} \implies f_k = \mu_k N = 0.280(176.4) = 49.392\text{ N}

  2. Step 2

    Fnet=F+fk=85.0+49.392=134.392 NF_{\text{net}} = F + f_k = 85.0 + 49.392 = 134.392\text{ N}

    Correct

    Fnet=F−fk=85.0 N−49.392 N=35.608 NF_{\text{net}} = F - f_k = 85.0\text{ N} - 49.392\text{ N} = 35.608\text{ N}

    Because kinetic friction acts in the direction opposite to the crate's displacement, its force opposes the pulling force and must be subtracted to find the net horizontal force.

  3. Step 3

    Wnet=Fnetd=(134.392)(6.50)=873.548 JW_{\text{net}} = F_{\text{net}} d = (134.392)(6.50) = 873.548\text{ J}

    Correct

    Wnet=Fnetd=(35.608 N)(6.50 m)=231.452 JW_{\text{net}} = F_{\text{net}} d = (35.608\text{ N})(6.50\text{ m}) = 231.452\text{ J}

    Your formula for work is correct, but the value is affected by the incorrect net force from the previous step.

  4. Step 4

    Wnet=12mvf2  ⟹  873.548=9.00vf2  ⟹  vf2=97.06  ⟹  vf=9.85 m/sW_{\text{net}} = \frac{1}{2}mv_f^2 \implies 873.548 = 9.00v_f^2 \implies v_f^2 = 97.06 \implies v_f = 9.85\text{ m/s}

    Correct

    231.452 J=12(18.0 kg)vf2  ⟹  vf2=231.4529.00≈25.717 m2/s2  ⟹  vf≈5.07 m/s231.452\text{ J} = \frac{1}{2}(18.0\text{ kg})v_f^2 \implies v_f^2 = \frac{231.452}{9.00} \approx 25.717\text{ m}^2/\text{s}^2 \implies v_f \approx 5.07\text{ m/s}

    You applied the Work-Energy Theorem and solved for velocity with correct algebraic steps, but the result is inflated due to the propagated net work error.

WHAT YOU DID WELL
Compliments from Your Teacher

You correctly identified that the normal force balances gravity on a level horizontal surface.

You used the friction coefficient formula accurately to find the magnitude of kinetic friction.

You correctly related the net work done on the object to its change in kinetic energy.

THE ERROR
Where Your ACEpath Teacher Spotted the Mistake
Incorrect force sign in net horizontal force

no

WHY IT HAPPENED
ACEpath Teacher's Diagnosis

You treated friction as an additive force rather than an opposing resistive force when determining the net horizontal force acting along the direction of motion.

REASONING PATH
Your ACEpath teacher’s suggested approach
Direction of Kinetic Friction
  • Kinetic friction always opposes the relative motion (sliding direction) of the contact surface.

  • Always draw a free-body diagram or arrow for each horizontal force and define a positive direction along the motion before summing forces.

Sign of Work Done by Friction
  • Wf=fkdcos⁡(180∘)=−fkdW_f = f_k d \cos(180^\circ) = -f_k d

  • Verify that work done by friction is negative whenever motion occurs against friction.

CORRECTED PATH
ACEpath Teacher's Demonstration
  1. Subtract the friction force from the applied pulling force: Fnet=F−fk=85.0 N−49.392 N=35.608 NF_{\text{net}} = F - f_k = 85.0\text{ N} - 49.392\text{ N} = 35.608\text{ N}.

  2. Calculate the correct net work over the displacement: Wnet=Fnetd=(35.608 N)(6.50 m)=231.452 JW_{\text{net}} = F_{\text{net}} d = (35.608\text{ N})(6.50\text{ m}) = 231.452\text{ J}.

  3. Set the net work equal to the final kinetic energy: 231.452 J=12(18.0 kg)vf2=9.00vf2231.452\text{ J} = \frac{1}{2}(18.0\text{ kg})v_f^2 = 9.00 v_f^2.

  4. Solve for final speed: vf=231.4529.00≈5.07 m/sv_f = \sqrt{\frac{231.452}{9.00}} \approx 5.07\text{ m/s}.

Final answer

vf≈5.07 m/sv_f \approx 5.07\text{ m/s}

NEXT STEPS
Final Takeaways from Your Teacher
  • Sketch a quick free-body diagram showing the direction of displacement and each force vector before writing equations.

  • Practice computing net work by summing individual works: Wnet=WF+Wf=Fd−fkdW_{\text{net}} = W_F + W_f = F d - f_k d to make the opposing sign explicit.

OverviewACEpath Teacher's Diagnosis

03 The student forgets to take the square root of v_f² when solving the kinetic energy formula, giving a final speed of 25.7 m/s.

Sample Student Work

Reviewed by ACEpath Teacher
Step-by-Step Review
Walk Through It with Your Teacher
Partially correct
  1. Step 1

    N=(18.0)(9.80)=176.4 N  ⟹  fk=0.280(176.4)=49.392 NN = (18.0)(9.80) = 176.4\text{ N} \implies f_k = 0.280(176.4) = 49.392\text{ N}

  2. Step 2

    Fnet=85.0−49.392=35.608 N  ⟹  Wnet=(35.608)(6.50)=231.45 JF_{\text{net}} = 85.0 - 49.392 = 35.608\text{ N} \implies W_{\text{net}} = (35.608)(6.50) = 231.45\text{ J}

  3. Step 3

    Wnet=(12)mvf2W_{\text{net}} = \left(\frac{1}{2}\right) m v_f^2

  4. Step 4

    231.45=9.00vf231.45 = 9.00 v_f

    Correct

    231.45=12(18.0)vf2  ⟹  231.45=9.00vf2231.45 = \frac{1}{2}(18.0)v_f^2 \implies 231.45 = 9.00 v_f^2

    When substituting 12m=9.00 kg\frac{1}{2}m = 9.00\text{ kg}, you omitted the exponent 22 on vfv_f, writing 9.00vf9.00 v_f instead of 9.00vf29.00 v_f^2.

  5. Step 5

    vf=25.7 m/sv_f = 25.7\text{ m/s}

    Correct

    vf2=25.72  ⟹  vf=25.72≈5.07 m/sv_f^2 = 25.72 \implies v_f = \sqrt{25.72} \approx 5.07\text{ m/s}

    Because the exponent was dropped in the previous step, you solved a linear equation rather than taking the square root of vf2v_f^2.

WHAT YOU DID WELL
Compliments from Your Teacher

You correctly calculated the normal force and the opposing kinetic friction force.

You accurately determined the net horizontal force and the total work done on the crate.

You selected the correct Work-Energy Theorem relationship linking net work to kinetic energy.

THE ERROR
Where Your ACEpath Teacher Spotted the Mistake
Omitted Exponent in Kinetic Energy

You accidentally dropped the exponent 22 from vf2v_f^2 when evaluating 12mvf2\frac{1}{2}mv_f^2, writing 9.00vf9.00 v_f instead of 9.00vf29.00 v_f^2.

WHY IT HAPPENED
ACEpath Teacher's Diagnosis

A transcription lapse when moving from the algebraic formula K=12mv2K = \frac{1}{2}mv^2 to numbers caused you to treat the unknown as velocity rather than velocity squared, skipping the square-root step.

REASONING PATH
Your ACEpath teacher’s suggested approach
Track Powers of Variables
  • Kinetic energy depends on speed squared (K=12mv2K = \frac{1}{2}mv^2), not linear speed.

  • Circle or highlight exponents on variables before substituting numerical values to ensure they carry through to the next algebraic line.

Dimensional and Magnitude Sanity Check
  • Dividing work (J) by mass (kg) yields specific energy with units of m2/s2\text{m}^2/\text{s}^2, not m/s\text{m/s}.

  • Check whether the calculated speed makes physical sense; a crate pulled just 6.5 m6.5\text{ m} under a modest net force is unlikely to reach highway speed (25.7 m/s≈93 km/h25.7\text{ m/s} \approx 93\text{ km/h}). Taking the square root gives a realistic 5.07 m/s5.07\text{ m/s}.

CORRECTED PATH
ACEpath Teacher's Demonstration
  1. 231.45 J=12(18.0 kg)vf2231.45\text{ J} = \frac{1}{2}(18.0\text{ kg})v_f^2

  2. 231.45=9.00vf2231.45 = 9.00 v_f^2

  3. vf2=231.459.00≈25.717 m2/s2v_f^2 = \frac{231.45}{9.00} \approx 25.717\text{ m}^2/\text{s}^2

  4. vf=25.717≈5.07 m/sv_f = \sqrt{25.717} \approx 5.07\text{ m/s}

Final answer

vf≈5.07 m/sv_f \approx 5.07\text{ m/s}

NEXT STEPS
Final Takeaways from Your Teacher
  • Practice solving for speed from kinetic energy by explicitly writing the intermediate line v2=…v^2 = \dots before taking the square root.

  • Run a quick physical reasonableness check on final speeds whenever an object accelerates from rest over short distances.

Lock it in

Similar question

01

A 12.0 kg12.0\text{ kg} sled initially at rest is pulled along a horizontal snow path by a horizontal force of 40.0 N40.0\text{ N}. The coefficient of kinetic friction is μk=0.150\mu_k = 0.150. Using g=9.80 m/s2g = 9.80\text{ m/s}^2, find the speed of the sled after it travels 10.0 m10.0\text{ m}.

Answer

vf≈6.10 m/sv_f \approx 6.10\text{ m/s}. Key steps: fk=(0.150)(12.0)(9.80)=17.64 Nf_k = (0.150)(12.0)(9.80) = 17.64\text{ N}; Fnet=40.0−17.64=22.36 NF_{\text{net}} = 40.0 - 17.64 = 22.36\text{ N}; Wnet=(22.36)(10.0)=223.6 JW_{\text{net}} = (22.36)(10.0) = 223.6\text{ J}; 12(12.0)vf2=223.6  ⟹  vf=37.27≈6.10 m/s\frac{1}{2}(12.0)v_f^2 = 223.6 \implies v_f = \sqrt{37.27} \approx 6.10\text{ m/s}.

02

A 5.00 kg5.00\text{ kg} box slides on a horizontal floor with an initial speed of 4.00 m/s4.00\text{ m/s}. A person pushes it forward with a constant horizontal force of 25.0 N25.0\text{ N} over a distance of 3.00 m3.00\text{ m}. The kinetic friction between the box and floor is a constant 12.0 N12.0\text{ N}. Find the final speed of the box.

Answer

vf≈5.62 m/sv_f \approx 5.62\text{ m/s}. Key steps: Wnet=(F−fk)d=(25.0−12.0)(3.00)=39.0 JW_{\text{net}} = (F - f_k)d = (25.0 - 12.0)(3.00) = 39.0\text{ J}; Ki=12(5.00)(4.00)2=40.0 JK_i = \frac{1}{2}(5.00)(4.00)^2 = 40.0\text{ J}; Kf=Ki+Wnet=40.0+39.0=79.0 JK_f = K_i + W_{\text{net}} = 40.0 + 39.0 = 79.0\text{ J}; 12(5.00)vf2=79.0  ⟹  vf=31.6≈5.62 m/s\frac{1}{2}(5.00)v_f^2 = 79.0 \implies v_f = \sqrt{31.6} \approx 5.62\text{ m/s}.

03

A 20.0 kg20.0\text{ kg} crate is pulled across a rough horizontal floor by a force of 100 N100\text{ N} directed at an angle of 30.0∘30.0^\circ above the horizontal. The coefficient of kinetic friction is μk=0.200\mu_k = 0.200. Taking g=9.80 m/s2g = 9.80\text{ m/s}^2, determine the final speed of the crate after moving 8.00 m8.00\text{ m} from rest.

Answer

vf≈7.04 m/sv_f \approx 7.04\text{ m/s}. Key steps: Vertical equilibrium gives FN=mg−Fsin⁡30.0∘=(20.0)(9.80)−100(0.500)=146 NF_N = mg - F\sin 30.0^\circ = (20.0)(9.80) - 100(0.500) = 146\text{ N}; fk=μkFN=0.200(146)=29.2 Nf_k = \mu_k F_N = 0.200(146) = 29.2\text{ N}; Fnet,x=Fcos⁡30.0∘−fk=100cos⁡30.0∘−29.2≈86.60−29.2=57.40 NF_{\text{net}, x} = F\cos 30.0^\circ - f_k = 100\cos 30.0^\circ - 29.2 \approx 86.60 - 29.2 = 57.40\text{ N}; Wnet=(57.40)(8.00)=459.2 JW_{\text{net}} = (57.40)(8.00) = 459.2\text{ J}; 12(20.0)vf2=459.2  ⟹  vf=45.92≈7.04 m/s\frac{1}{2}(20.0)v_f^2 = 459.2 \implies v_f = \sqrt{45.92} \approx 7.04\text{ m/s}.

Loading workspace…