Resources

Monochromatic light of wavelength λ=500 nm\lambda = 500\text{ nm} is incident perpendicularly upon a single slit of width a=2.40 μma = 2.40\ \mu\text{m}. Find the total number of dark fringes (diffraction minima) that can physically appear on an infinitely wide viewing screen positioned far behind the slit, and calculate the exact diffraction angle θ\theta of the outermost physically observable minimum.

Answer and steps

Final answer

Total minima: 88 (44 on each side of the central maximum); outermost minimum angle: θ=56.4∘\theta = 56.4^\circ

Steps

01

Determine the Maximum Order of Minima

Condition for Single-Slit Diffraction Minima

When monochromatic light of wavelength λ\lambda passes through a single slit of width aa, destructive interference occurs across the wavefront, producing dark fringes (minima) at angles θ\theta governed by: asin⁡θ=mλ,where m=±1,±2,±3,…a \sin\theta = m\lambda, \quad \text{where } m = \pm 1, \pm 2, \pm 3, \dots Here:

  • a=2.40 μm=2.40×10−6 ma = 2.40\ \mu\text{m} = 2.40 \times 10^{-6}\text{ m}
  • λ=500 nm=0.500 μm=5.00×10−7 m\lambda = 500\text{ nm} = 0.500\ \mu\text{m} = 5.00 \times 10^{-7}\text{ m}
  • mm is a non-zero integer representing the order of the minimum. Notice that m=0m = 0 corresponds to the central maximum, not a minimum.

For light to project onto a screen placed behind the slit, the physical diffraction angle must satisfy:

∣sin⁡θ∣≤1|\sin\theta| \le 1

Substitute the condition for diffraction minima into this physical bound:

∣m∣=a∣sin⁡θ∣λ≤aλ|m| = \frac{a |\sin\theta|}{\lambda} \le \frac{a}{\lambda}

Calculate the numerical ratio:

aλ=2.40 μm0.500 μm=4.8\frac{a}{\lambda} = \frac{2.40\ \mu\text{m}}{0.500\ \mu\text{m}} = 4.8

Because the order mm must be an integer, the maximum possible order is:

mmax⁡=⌊4.8⌋=4m_{\max} = \lfloor 4.8 \rfloor = 4


02

Find the Total Number of Observable Minima

The diffraction pattern is symmetric about the central maximum (θ=0∘\theta = 0^\circ). The allowed integer values for mm are:

m∈{−4,−3,−2,−1,+1,+2,+3,+4}m \in \{-4, -3, -2, -1, +1, +2, +3, +4\}

  • Minima on one side of the central maximum: 44
  • Minima on the other side of the central maximum: 44

Total minima=2×mmax⁡=2×4=8\text{Total minima} = 2 \times m_{\max} = 2 \times 4 = 8

(Pitfall to avoid: Unlike double-slit interference where m=0m=0 is a principal maximum, in single-slit diffraction m=0m=0 does not represent a minimum, so zero is not included in the count.)


03

Calculate the Outermost Diffraction Angle

The outermost observable minimum corresponds to the highest order, m=4m = 4:

sin⁡θ=mλa=4×0.500 μm2.40 μm=2.002.40=56≈0.8333\sin\theta = \frac{m\lambda}{a} = \frac{4 \times 0.500\ \mu\text{m}}{2.40\ \mu\text{m}} = \frac{2.00}{2.40} = \frac{5}{6} \approx 0.8333

Taking the inverse sine:

θ=arcsin⁡(56)≈56.44∘≈56.4∘\theta = \arcsin\left(\frac{5}{6}\right) \approx 56.44^\circ \approx 56.4^\circ

Typical errors

OverviewACEpath Teacher's Diagnosis

01 The student rounds the ratio a / λ to the nearest integer 5 instead of taking the floor, predicting 5 orders on each side.

Sample Student Work

Reviewed by ACEpath Teacher
Step-by-Step Review
Walk Through It with Your Teacher
Incorrect
  1. Step 1

    asin⁡θ=mλ  ⟹  m=aλ=2400 nm500 nm=4.8a \sin\theta = m\lambda \implies m = \frac{a}{\lambda} = \frac{2400\text{ nm}}{500\text{ nm}} = 4.8

  2. Step 2

    mmax⁡=5m_{\max} = 5

    Correct

    m≤aλ=4.8  ⟹  mmax⁡=⌊4.8⌋=4m \le \frac{a}{\lambda} = 4.8 \implies m_{\max} = \lfloor 4.8 \rfloor = 4

    Because ∣sin⁡θ∣≤1|\sin\theta| \le 1, the physical order must satisfy m≤4.8m \le 4.8. Since mm must be an integer, you must round down (take the floor) to mmax⁡=4m_{\max} = 4, rather than rounding to the nearest integer.

  3. Step 3

    Total dark fringes=2×5=10\text{Total dark fringes} = 2 \times 5 = 10

    Correct

    Total dark fringes=2×mmax⁡=2×4=8\text{Total dark fringes} = 2 \times m_{\max} = 2 \times 4 = 8

    This step followed your calculation of mmax⁡=5m_{\max} = 5, but with mmax⁡=4m_{\max} = 4 there are 44 minima on each side of the central maximum, giving a total of 88.

  4. Step 4

    sin⁡θ=5λa=54.8=1.04>1, so θ cannot be evaluated\sin\theta = \frac{5\lambda}{a} = \frac{5}{4.8} = 1.04 > 1\text{, so }\theta\text{ cannot be evaluated}

    Correct

    sin⁡θ=4λa=44.8=56  ⟹  θ=arcsin⁡(56)≈56.4∘\sin\theta = \frac{4\lambda}{a} = \frac{4}{4.8} = \frac{5}{6} \implies \theta = \arcsin\left(\frac{5}{6}\right) \approx 56.4^\circ

    You correctly noticed that sin⁡θ=1.04>1\sin\theta = 1.04 > 1 is physically impossible. That contradiction was the clue that m=5m=5 cannot exist, so the outermost physical minimum occurs at the true maximum integer order m=4m=4.

WHAT YOU DID WELL
Compliments from Your Teacher

You correctly stated the single-slit destructive interference condition asin⁡θ=mλa \sin\theta = m\lambda.

You correctly converted units and evaluated aλ=4.8\frac{a}{\lambda} = 4.8.

You recognized that the diffraction pattern is symmetric on both sides of the central maximum.

You correctly identified that a value of sin⁡θ>1\sin\theta > 1 is mathematically and physically impossible.

THE ERROR
Where Your ACEpath Teacher Spotted the Mistake
Rounding Up Bound Instead of Flooring

no

WHY IT HAPPENED
ACEpath Teacher's Diagnosis

You rounded the theoretical upper bound aλ=4.8\frac{a}{\lambda} = 4.8 to the nearest integer (55) rather than applying the physical constraint ∣sin⁡θ∣≤1|\sin\theta| \le 1, which requires m≤4.8m \le 4.8 and therefore mmax⁡=⌊4.8⌋=4m_{\max} = \lfloor 4.8 \rfloor = 4.

REASONING PATH
Your ACEpath teacher’s suggested approach
Physical Angle Constraint
  • The diffraction angle on a flat screen must satisfy ∣sin⁡θ∣≤1|\sin\theta| \le 1.

  • Always set up the inequality m=asin⁡θλ≤aλm = \frac{a\sin\theta}{\lambda} \le \frac{a}{\lambda} and take the integer floor: mmax⁡=⌊a/λ⌋m_{\max} = \lfloor a / \lambda \rfloor.

CORRECTED PATH
ACEpath Teacher's Demonstration
  1. Apply the physical boundary ∣sin⁡θ∣≤1|\sin\theta| \le 1 to obtain m≤aλ=4.8m \le \frac{a}{\lambda} = 4.8.

  2. Determine the maximum integer order: mmax⁡=⌊4.8⌋=4m_{\max} = \lfloor 4.8 \rfloor = 4.

  3. Count the total minima across both sides: N=2×4=8N = 2 \times 4 = 8.

  4. Calculate the outermost angle using m=4m = 4: sin⁡θ=44.8=56\sin\theta = \frac{4}{4.8} = \frac{5}{6}, which yields θ=arcsin⁡(56)≈56.4∘\theta = \arcsin\left(\frac{5}{6}\right) \approx 56.4^\circ.

Final answer

Total minima: 88; outermost angle: θ=56.4∘\theta = 56.4^\circ

NEXT STEPS
Final Takeaways from Your Teacher
  • When finding maximum interference or diffraction orders, always use the floor function ⌊bound⌋\lfloor \text{bound} \rfloor rather than standard rounding.

  • Whenever you calculate sin⁡θ>1\sin\theta > 1, treat it as an alert to drop down to the previous integer order.

OverviewACEpath Teacher's Diagnosis

02 The student forgets that diffraction minima occur symmetrically on both sides of the central peak and only counts m = 1, 2, 3, 4.

Sample Student Work

Reviewed by ACEpath Teacher
Step-by-Step Review
Walk Through It with Your Teacher
Partially correct
  1. Step 1

    asin⁡θ=mλ  ⟹  m<aλ=2.40 μm0.50 μm=4.8a \sin\theta = m\lambda \implies m < \frac{a}{\lambda} = \frac{2.40\ \mu\text{m}}{0.50\ \mu\text{m}} = 4.8

  2. Step 2

    Possible orders are m=1,2,3,4  ⟹  Total dark fringes=4m = 1, 2, 3, 4 \implies \text{Total dark fringes} = 4

    Correct

    m∈{±1,±2,±3,±4}  ⟹  Total dark fringes=2×4=8m \in \{\pm 1, \pm 2, \pm 3, \pm 4\} \implies \text{Total dark fringes} = 2 \times 4 = 8

    You only counted the orders on one side of the central peak. Minima appear symmetrically on both sides of θ=0∘\theta = 0^\circ, corresponding to m=±1,±2,±3,±4m = \pm 1, \pm 2, \pm 3, \pm 4, giving 88 total dark fringes.

  3. Step 3

    sin⁡θ=4×(0.502.40)=56  ⟹  θ=arcsin⁡(56)≈56.44∘\sin\theta = 4 \times \left(\frac{0.50}{2.40}\right) = \frac{5}{6} \implies \theta = \arcsin\left(\frac{5}{6}\right) \approx 56.44^\circ

WHAT YOU DID WELL
Compliments from Your Teacher

You correctly identified the diffraction minimum condition asin⁡θ=mλa \sin\theta = m\lambda.

You correctly determined the cutoff ratio aλ=4.8\frac{a}{\lambda} = 4.8 and the maximum integer order 44.

You accurately solved for the outermost angle θ=arcsin⁡(5/6)≈56.44∘\theta = \arcsin(5/6) \approx 56.44^\circ.

THE ERROR
Where Your ACEpath Teacher Spotted the Mistake
Single-slit fringe counting: missing negative orders

no

WHY IT HAPPENED
ACEpath Teacher's Diagnosis

You treated the order number mm strictly as a positive count rather than a signed integer index representing symmetric physical diffraction orders on both sides (+θ+\theta and −θ-\theta) of the central maximum.

REASONING PATH
Your ACEpath teacher’s suggested approach
Symmetry of diffraction fringes
  • Diffraction patterns are symmetric around θ=0∘\theta = 0^\circ. Every positive order +m+m has an identical counterpart −m-m on the opposite side.

  • Always multiply the maximum order by 22 to account for both sides: Total minima=2×mmax⁡\text{Total minima} = 2 \times m_{\max}.

Exclude the central peak
  • For single-slit diffraction, m=0m = 0 corresponds to the central maximum, not a minimum.

  • Never add 11 for m=0m=0 when counting single-slit dark fringes.

CORRECTED PATH
ACEpath Teacher's Demonstration
  1. Recognize that diffraction minima appear on both sides of the central maximum at angles satisfying sin⁡θ=mλa\sin\theta = \frac{m\lambda}{a}.

  2. List all allowed non-zero integer values for mm within [−4,4][-4, 4]: m∈{−4,−3,−2,−1,+1,+2,+3,+4}m \in \{-4, -3, -2, -1, +1, +2, +3, +4\}.

  3. Count the total number of allowed integers: 2×4=82 \times 4 = 8.

Final answer

Total dark fringes: 88; outermost minimum angle: θ≈56.4∘\theta \approx 56.4^\circ (or 56.44∘56.44^\circ)

NEXT STEPS
Final Takeaways from Your Teacher
  • Review the distinction between single-slit minima (m=±1,±2,…m = \pm 1, \pm 2, \dots, excluding 00) and double-slit interference maxima (m=0,±1,±2,…m = 0, \pm 1, \pm 2, \dots, including 00).

  • Practice sketch-and-count problems where you explicitly draw both lobes of the diffraction pattern before writing down the total.

OverviewACEpath Teacher's Diagnosis

03 The student misapplies the small-angle approximation sin θ ≈ θ to find the outermost angle where θ is large.

Sample Student Work

Reviewed by ACEpath Teacher
Step-by-Step Review
Walk Through It with Your Teacher
Partially correct
  1. Step 1

    asin⁡θ=mλ  ⟹  mmax⁡<2.40×10−6 m500×10−9 m=4.8  ⟹  mmax⁡=4  ⟹  Total dark fringes=2×4=8a \sin\theta = m\lambda \implies m_{\max} < \frac{2.40 \times 10^{-6}\text{ m}}{500 \times 10^{-9}\text{ m}} = 4.8 \implies m_{\max} = 4 \implies \text{Total dark fringes} = 2 \times 4 = 8

  2. Step 2

    For m=4,θ≈4λa  ⟹  θ=44.8=0.833 rad  ⟹  θ=0.833×(180∘π)≈47.7∘\text{For } m = 4, \theta \approx \frac{4\lambda}{a} \implies \theta = \frac{4}{4.8} = 0.833\text{ rad} \implies \theta = 0.833 \times \left(\frac{180^\circ}{\pi}\right) \approx 47.7^\circ

    Correct

    sin⁡θ=4λa=44.8=56  ⟹  θ=arcsin⁡(56)≈56.4∘\sin\theta = \frac{4\lambda}{a} = \frac{4}{4.8} = \frac{5}{6} \implies \theta = \arcsin\left(\frac{5}{6}\right) \approx 56.4^\circ

    You substituted sin⁡θ≈θ\sin\theta \approx \theta in radians. However, the value 4λa=0.833\frac{4\lambda}{a} = 0.833 corresponds to sin⁡θ\sin\theta, not θ\theta. Because sin⁡θ=0.833\sin\theta = 0.833 is relatively close to 11 (yielding θ>50∘\theta > 50^\circ), the small-angle approximation is invalid and introduces significant error. You need to take the inverse sine directly: θ=arcsin⁡(0.833)≈56.4∘\theta = \arcsin(0.833) \approx 56.4^\circ.

WHAT YOU DID WELL
Compliments from Your Teacher

You stated the correct single-slit diffraction condition for dark fringes, asin⁡θ=mλa \sin\theta = m\lambda.

You set the upper bound ∣sin⁡θ∣≤1|\sin\theta| \le 1 to determine the maximum integer order mmax⁡=4m_{\max} = 4.

You correctly doubled mmax⁡m_{\max} to count the dark fringes symmetrically on both sides of the central maximum.

THE ERROR
Where Your ACEpath Teacher Spotted the Mistake
Inappropriate small-angle approximation

You equated θ\theta directly to mλa\frac{m\lambda}{a} instead of computing θ=arcsin⁡(mλa)\theta = \arcsin\left(\frac{m\lambda}{a}\right).

WHY IT HAPPENED
ACEpath Teacher's Diagnosis

Habitual reliance on the small-angle approximation (sin⁡θ≈θ\sin\theta \approx \theta) from paraxial optics problems, even when calculating high-order or outermost diffraction features where angles frequently exceed 10∘10^\circ–15∘15^\circ.

REASONING PATH
Your ACEpath teacher’s suggested approach
Check the magnitude of $\sin\theta$
  • The small-angle approximation sin⁡θ≈θ\sin\theta \approx \theta (in radians) is only valid within about 1%1\% error when θ≤10∘\theta \le 10^\circ to 14∘14^\circ (or sin⁡θ≤0.17\sin\theta \le 0.17 to 0.240.24).

  • Whenever you compute sin⁡θ\sin\theta, check if it exceeds 0.20.2. If it does, always evaluate θ=arcsin⁡(… )\theta = \arcsin(\dots) exactly using a calculator.

Solve for the trigonometric function first
  • Diffraction formulas always relate slit geometry directly to sin⁡θ\sin\theta: sin⁡θ=mλa\sin\theta = \frac{m\lambda}{a}.

  • Write sin⁡θ=…\sin\theta = \dots explicitly as your intermediate step before solving for θ\theta, avoiding the automatic shortcut θ≈mλa\theta \approx \frac{m\lambda}{a}.

CORRECTED PATH
ACEpath Teacher's Demonstration
  1. Calculate the exact sine ratio: sin⁡θ=4×0.500 μm2.40 μm=2.002.40=56≈0.8333\sin\theta = \frac{4 \times 0.500\ \mu\text{m}}{2.40\ \mu\text{m}} = \frac{2.00}{2.40} = \frac{5}{6} \approx 0.8333.

  2. Apply the inverse sine function: θ=arcsin⁡(56)≈0.9851 rad\theta = \arcsin\left(\frac{5}{6}\right) \approx 0.9851\text{ rad}.

  3. Convert to degrees: θ≈0.9851×(180∘π)≈56.44∘≈56.4∘\theta \approx 0.9851 \times \left(\frac{180^\circ}{\pi}\right) \approx 56.44^\circ \approx 56.4^\circ.

Final answer

θ≈56.4∘\theta \approx 56.4^\circ

NEXT STEPS
Final Takeaways from Your Teacher
  • Practice computing angles from diffraction gratings and single slits by always writing sin⁡θ=…\sin\theta = \dots before deciding whether to approximate.

  • Compare θ\theta and sin⁡θ\sin\theta for various angles between 5∘5^\circ and 60∘60^\circ to develop an intuitive feel for where the approximation breaks down.

Lock it in

Similar question

01

Light of wavelength λ=600 nm\lambda = 600\text{ nm} passes through a single slit of width a=1.90 μma = 1.90\ \mu\text{m}. Find the total number of dark fringes observable on a distant screen and the angle of the highest-order dark fringe.

Answer

66 dark fringes; θ≈71.8∘\theta \approx 71.8^\circ. Key steps: aλ=1.900.60≈3.17\frac{a}{\lambda} = \frac{1.90}{0.60} \approx 3.17, so mmax⁡=⌊3.17⌋=3m_{\max} = \lfloor 3.17 \rfloor = 3. Total dark fringes =2×3=6= 2 \times 3 = 6. For m=3m = 3, sin⁡θ=3×0.601.90=1.801.90≈0.9474  ⟹  θ=arcsin⁡(0.9474)≈71.8∘\sin\theta = \frac{3 \times 0.60}{1.90} = \frac{1.80}{1.90} \approx 0.9474 \implies \theta = \arcsin(0.9474) \approx 71.8^\circ.

02

A single slit is illuminated with light of wavelength λ=450 nm\lambda = 450\text{ nm}. Exactly 1212 diffraction minima are observed on an infinitely wide viewing screen. What is the allowable range for the slit width aa?

Answer

2.70 μm≤a<3.15 μm2.70\ \mu\text{m} \le a < 3.15\ \mu\text{m}. Key steps: With 1212 total minima, there are 66 on each side, so mmax⁡=6m_{\max} = 6. This requires 6≤aλ<76 \le \frac{a}{\lambda} < 7. Multiplying by λ=450 nm=0.450 μm\lambda = 450\text{ nm} = 0.450\ \mu\text{m} gives 6×0.450 μm≤a<7×0.450 μm6 \times 0.450\ \mu\text{m} \le a < 7 \times 0.450\ \mu\text{m}, or 2.70 μm≤a<3.15 μm2.70\ \mu\text{m} \le a < 3.15\ \mu\text{m}.

03

In a single-slit diffraction experiment, the second minimum (m=2m = 2) appears at θ=30.0∘\theta = 30.0^\circ. Determine the total number of minima physically observable and find the angle of the outermost minimum.

Answer

88 minima; θ≈56.4∘\theta \approx 56.4^\circ. Key steps: From asin⁡30.0∘=2λa \sin 30.0^\circ = 2\lambda, we find a(0.5)=2λ  ⟹  aλ=4.0a(0.5) = 2\lambda \implies \frac{a}{\lambda} = 4.0. The boundary sin⁡θ=1\sin\theta = 1 gives θ=90∘\theta = 90^\circ, which is grazing and not cast onto a screen behind the slit, or strictly m<4.0m < 4.0 for viewing on a flat screen (m≤4m \le 4 with m=4m=4 at sin⁡θ=1\sin\theta=1). In standard geometry with finite viewing angles, mmax⁡=4m_{\max} = 4 gives sin⁡θ=1.0\sin\theta = 1.0 (grazing). If θ=30.0∘\theta = 30.0^\circ for m=2m=2, then aλ=4.0\frac{a}{\lambda} = 4.0, total minima =2×4=8= 2 \times 4 = 8 (or 66 if θ<90∘\theta < 90^\circ strictly).

Loading workspace…