Resources
Two artillery shells, Shell A and Shell B, are fired simultaneously from flat ground with identical muzzle speeds at complementary angles: Shell A at and Shell B at above the horizontal. While both projectiles achieve the exact same horizontal range, their intermediate trajectories differ substantially. For each shell, calculate: (a) the initial component velocities ( and ), (b) the maximum altitude , and (c) the total time of flight . Take .
Answer and steps
Final answer
Shell A: , , , ; Shell B: , , ,
Steps
Resolve Initial Velocities into Components
Any initial velocity vector launched at an angle above the horizontal can be resolved into independent horizontal and vertical components:
- Shell A ():
- Shell B ():
Determine the Maximum Altitude ()
At peak height, the vertical velocity momentarily reaches zero (). Using the kinematic relationship :
- Shell A:
- Shell B:
Common Pitfall: A frequent mistake is using the full muzzle speed instead of the vertical component when finding the peak height. Gravity acts only along the vertical axis, so horizontal motion has no effect on height.
Determine Total Time of Flight ()
For level terrain (), vertical displacement is given by . Solving for non-zero time :
- Shell A:
- Shell B:
Although complementary launch angles ( and ) yield the same horizontal range because is identical, the projectile fired at the steeper angle has a significantly larger vertical component, resulting in a much higher peak and longer air time.
Typical errors
01 The student swaps the trigonometric functions for horizontal and vertical components, setting vx with sine and vy with cosine.
Sample Student Work
Reviewed by ACEpath TeacherStep-by-Step Review
Walk Through It with Your Teacher- Step 1
Shell A: , ⟹ Shell B: ,
CorrectShell A: , ⟹ Shell B: ,
Because the launch angle is measured above the horizontal, the horizontal component is adjacent to the angle () and the vertical component is opposite to the angle (). You reversed these definitions, setting and .
- Step 2
Shell A: ⟹ Shell B:
CorrectShell A: ⟹ Shell B:
You used the correct kinematic relation and evaluated it accurately, but your results were swapped because of the inverted initial velocity components from Step 1.
- Step 3
Shell A: ⟹ Shell B:
CorrectShell A: ⟹ Shell B:
You applied the correct time-of-flight formula with correct arithmetic, but your final values are inverted due to using the incorrect vertical velocity components.
WHAT YOU DID WELL
Compliments from Your TeacherYou correctly identified and applied the formula for maximum projectile height.
You correctly identified and applied the formula for total time of flight over level ground.
You performed accurate arithmetic calculations throughout all steps.
THE ERROR
Where Your ACEpath Teacher Spotted the MistakeYou associated the horizontal component with sine and the vertical component with cosine.
WHY IT HAPPENED
ACEpath Teacher's DiagnosisYou swapped the adjacent and opposite sides of the reference right triangle when breaking the velocity vector into orthogonal components relative to the horizontal.
REASONING PATH
Your ACEpath teacher’s suggested approach- Reference Triangle Angle Check
For an angle measured relative to the horizontal, the horizontal side is adjacent () and the vertical side is opposite ().
Draw a right triangle with as the hypotenuse and identify which leg lies along the ground before writing formulas.
- Steepness Sanity Check
A steeper launch angle closer to must yield a larger vertical velocity than horizontal velocity.
Compare and for : verify that before moving on.
CORRECTED PATH
ACEpath Teacher's DemonstrationRecalculate the initial components using and :
Shell A (): and .
Shell B (): and .
Substitute the corrected into to find and .
Substitute the corrected into to find and .
Shell A: , , , ; Shell B: , , ,
02 The student forgets the factor of 2 in the denominator of the maximum height formula, calculating v0y² / g instead of v0y² / (2g).
Sample Student Work
Reviewed by ACEpath TeacherStep-by-Step Review
Walk Through It with Your Teacher- Step 1
Shell A: , ; Shell B: ,
- Step 2
Shell A: ; Shell B:
CorrectShell A: ; Shell B:
You used instead of . From the kinematic equation , setting at the peak gives , which introduces a factor of in the denominator.
- Step 3
Shell A: ; Shell B:
WHAT YOU DID WELL
Compliments from Your TeacherYou correctly resolved the initial velocity vectors into horizontal and vertical components using standard trigonometric functions.
You recognized that only the vertical velocity component governs vertical motion parameters like maximum height and time of flight.
You correctly computed the total flight time for both shells using .
THE ERROR
Where Your ACEpath Teacher Spotted the MistakeYou wrote rather than , forgetting the coefficient of 2 that comes from .
WHY IT HAPPENED
ACEpath Teacher's DiagnosisConfusing the time-to-peak formula with displacement formulas, or memorizing without re-deriving it from or work-energy conservation ().
REASONING PATH
Your ACEpath teacher’s suggested approach- Derive from the Third Kinematic Equation
At maximum altitude, vertical velocity is momentarily zero: .
Set and solve for to ensure the factor of 2 is preserved.
- Verify with Work-Energy Principles
Vertical kinetic energy converts completely into gravitational potential energy at the peak: .
Divide both sides by to see immediately that the produces a in the denominator.
CORRECTED PATH
ACEpath Teacher's DemonstrationShell A: .
Shell B: .
Shell A: , , , ; Shell B: , , ,
03 The student calculates the time to reach the apex instead of the total flight time, omitting the factor of 2.
Sample Student Work
Reviewed by ACEpath TeacherStep-by-Step Review
Walk Through It with Your Teacher- Step 1
Shell A: , ⟹ Shell B: ,
- Step 2
Shell A: ⟹ Shell B:
- Step 3
⟹ Shell A: ⟹ Shell B:
Correct⟹ Shell A: ⟹ Shell B:
The formula represents the time to reach the apex (). For a projectile launched and landing on flat ground, the total flight time includes both ascending and descending phases, which doubles the duration to .
WHAT YOU DID WELL
Compliments from Your TeacherYou correctly resolved both launch velocity vectors into their orthogonal components.
You used the vertical velocity component properly in the kinematic equation to obtain maximum altitude.
THE ERROR
Where Your ACEpath Teacher Spotted the MistakeYou set up from , which solves for the moment the projectile reaches its highest point rather than when it lands back on flat ground.
WHY IT HAPPENED
ACEpath Teacher's DiagnosisConfusing the condition for maximum height (, giving ) with the condition for completing the flight over level ground (, giving ). Because projectile motion on flat ground is vertically symmetric, the total flight time is exactly twice the time to the apex.
REASONING PATH
Your ACEpath teacher’s suggested approach- Identify the Terminal Vertical Condition
Apex corresponds to , whereas landing on level ground corresponds to .
Always verify whether the question asks for time to peak altitude () or the full round trip ().
- Apply Trajectory Symmetry
For launch and landing at equal elevation, time of ascent equals time of descent: .
Multiply by whenever finding the full air time over horizontal terrain.
CORRECTED PATH
ACEpath Teacher's DemonstrationUse the level-ground flight time formula: .
For Shell A: .
For Shell B: .
Shell A: , , , ; Shell B: , , ,
Lock it in
When a projectile is launched at an angle above the horizontal, which trigonometric function gives the horizontal component ?
. The horizontal side is adjacent to the angle measured from the ground.
Similar question
A soccer ball is kicked from level ground with an initial speed of at an angle of above the horizontal. Taking and , find: (a) the initial component velocities and , and (b) the maximum height reached ().
Answer
(a) , . (b) .
A rescue package is dropped from an airplane in a dive at speed at an angle of below the horizontal. Write down the initial horizontal velocity and vertical velocity (defining downward as negative).
Answer
; . Both components have magnitude .
A cannon on level ground fires a shell with muzzle speed at an angle of above the horizontal. Calculate its total time of flight and maximum altitude, taking .
Answer
. Time of flight: . Maximum height: .