Resources
In a precision physics laboratory, a Faraday ice pail connected to a calibrated digital electrometer is used to verify Faraday's law of charge conservation during electrostatic induction and contact transfer. A conducting proof plane mounted on an insulating handle carries an unknown initial charge . The proof plane is completely lowered inside the conductive inner bucket of the Faraday ice pail without touching the walls, producing an electrometer reading of . The effective input capacitance of the pail-electrometer system is . Next, the proof plane is allowed to touch the interior surface of the inner bucket and is then completely withdrawn. (a) Calculate the magnitude and sign of the charge on the proof plane prior to contact. (b) Predict the electrometer voltage reading while the proof plane touches the interior wall and after it is withdrawn. (c) What is the final net charge remaining on the proof plane after removal from the pail?
Answer and steps
Final answer
(a) ; (b) The electrometer voltage remains during contact and stays at after withdrawal; (c) (all excess charge resides entirely on the exterior surface of the outer system).
Steps
Part (a): Determining the Initial Charge on the Proof Plane
When a charged object carrying charge is lowered deep inside a closed or nearly closed hollow conductor (a Faraday ice pail) without making contact:
- By electrostatic induction, an equal and opposite charge, , is drawn to the inner surface of the pail.
- By the conservation of electric charge, a charge is pushed to the outer surface of the pail and the connected electrometer.
The relationship between the charge on the outer surface, , the system's effective capacitance , and the measured potential difference is:
Substitute the given values ( and ):
Because the electrometer measures a positive potential (), the charge is positive:
Part (b): Electrometer Voltage During and After Contact
- During contact: When the proof plane touches the inner wall of the pail, it temporarily forms a single continuous conductor with the bucket. In electrostatic equilibrium, any net excess charge resides strictly on the outer surface of a conductor (by Gauss's law, inside the conducting material). The charge on the inner surface neutralizes the charge on the proof plane. The total charge residing on the outer surface remains exactly . Therefore, the electrometer voltage remains constant at:
- After withdrawal: Since the neutralization occurred inside the hollow cavity and all excess charge remains distributed over the external surface, withdrawing the uncharged proof plane causes no redistribution of charge. The electrometer voltage stays at:
Part (c): Final Net Charge on the Proof Plane
Because all excess charge transferred completely to the exterior surface of the pail system during contact, no charge remains on the interior surface or on the proof plane.
Therefore, upon removal, the final net charge on the proof plane is:
Typical errors
01 The student forgets that electrostatic induction redistributes opposite charge to the outer surface, mistakenly believing the electrometer measures an opposite induced charge, yielding a negative initial charge.
Sample Student Work
Reviewed by ACEpath TeacherStep-by-Step Review
Walk Through It with Your Teacher- Step 1Correct
You added a negative sign to the formula. When a positive charge enters the pail, it induces an opposite charge on the inner surface and an equal like charge on the outer surface connected to the electrometer. Since the electrometer measures , the outer charge and the source charge are both positive.
- Step 2Correct
You recognized that the voltage remains unchanged during contact and after removal, which is physically correct. However, your values inherited the incorrect negative sign from your initial step instead of matching the measured .
- Step 3
WHAT YOU DID WELL
Compliments from Your TeacherYou correctly applied the capacitance relation to calculate the magnitude of the charge.
You correctly recognized that the electrometer voltage does not change during contact or after withdrawal.
You correctly identified that the final net charge on the proof plane is zero after contacting the interior wall.
THE ERROR
Where Your ACEpath Teacher Spotted the MistakeYou mistook the charge on the outer surface of the Faraday pail for the induced inner charge rather than the like charge displaced to the electrometer.
WHY IT HAPPENED
ACEpath Teacher's DiagnosisConfusing the sign of the induced inner surface charge () with the sign of the charge pushed to the exterior surface and electrometer (). By Gauss's law, a Gaussian surface inside the conducting walls encloses zero net charge, so the inner surface acquires . By conservation of charge on the initially neutral pail, the exterior receives .
REASONING PATH
Your ACEpath teacher’s suggested approach- Outer Surface Charge Rule
An enclosed charge induces on the inner wall and on the exterior of an isolated neutral hollow conductor.
Always set the exterior charge (and electrometer reading) to the same sign as the enclosed object.
- Cavity Contact Transfer
Touching the inner wall allows the enclosed charge to neutralize the inner induced charge, leaving all excess charge on the outer wall.
Keep the electrometer reading constant at its pre-contact value throughout contact and withdrawal.
CORRECTED PATH
ACEpath Teacher's DemonstrationIdentify that the electrometer connects to the exterior surface of the Faraday pail.
Apply charge conservation: .
Calculate .
State that the electrometer continues to measure the exterior potential: during contact and after withdrawal.
(a) ; (b) during contact and after withdrawal; (c)
02 The student incorrectly treats contact with the interior bucket as sharing charge between two isolated conductors in parallel rather than realizing all charge resides on the outer surface of a hollow conductor.
Sample Student Work
Reviewed by ACEpath TeacherStep-by-Step Review
Walk Through It with Your Teacher- Step 1
- Step 2Correct
You correctly identified that the potential remains during contact. However, after withdrawal, the reading does not drop to ; it remains because no charge leaves the bucket with the proof plane.
- Step 3Correct
When a charged conductor touches the interior wall of a hollow conductor, it becomes part of the interior cavity. In electrostatic equilibrium, all excess charge resides strictly on the outer surface of the outer conductor, leaving on the proof plane.
WHAT YOU DID WELL
Compliments from Your TeacherYou correctly used the electrostatic capacitance equation to calculate the magnitude and sign of the initial charge.
You correctly recognized that the electrometer voltage remains while the proof plane is in contact with the inner wall.
THE ERROR
Where Your ACEpath Teacher Spotted the MistakeYou assumed contact inside a Faraday ice pail behaves like two identical isolated conductors sharing charge equally.
WHY IT HAPPENED
ACEpath Teacher's DiagnosisYou overlooked Gauss's law for conductors in electrostatic equilibrium, which requires that any net excess charge on a hollow conductor reside entirely on its outermost surface, transferring of the internal charge to the pail's exterior.
REASONING PATH
Your ACEpath teacher’s suggested approach- Gauss's Law inside a Conductor
Inside conducting material in electrostatic equilibrium, , so Gaussian surfaces enclosing the interior cavity prove that zero net charge can reside on interior surfaces after contact.
Whenever an object touches the inside of a hollow conducting container, transfer of its excess charge to the exterior surface.
- Electrometer Independence after Contact Transfer
Because all excess charge resides on the exterior surface of the pail, removing an uncharged object from the interior cavity does not alter the exterior charge or the measured voltage.
Keep the electrometer reading constant before contact, during contact, and after withdrawing the neutralized probe.
CORRECTED PATH
ACEpath Teacher's DemonstrationRecognize that upon touching the inner wall, the proof plane and the pail form a single continuous conductor.
By electrostatic equilibrium and Gauss's law, all excess charge moves to the exterior surface of the outer bucket.
The inner surface and the proof plane neutralize completely to .
Withdrawing the completely discharged proof plane leaves all on the exterior bucket.
Because the exterior charge remains , the voltage stays .
(a) ; (b) during contact and after withdrawal; (c)
03 The student misinterprets withdrawing the proof plane as removing the inducing charge from the bucket, concluding the electrometer reading drops to zero after removal.
Sample Student Work
Reviewed by ACEpath TeacherStep-by-Step Review
Walk Through It with Your Teacher- Step 1
- Step 2
- Step 3Correct
Because the proof plane touched the interior surface, its excess charge transferred completely to the pail system. Withdrawing the now-neutral proof plane does not remove charge from the bucket, so the reading remains .
- Step 4
WHAT YOU DID WELL
Compliments from Your TeacherYou correctly related the induced outer charge to the electrometer capacitance and voltage.
You correctly identified that the voltage reading stays constant while contact is maintained.
You correctly determined that the proof plane retains zero charge upon removal.
THE ERROR
Where Your ACEpath Teacher Spotted the Mistakeno
WHY IT HAPPENED
ACEpath Teacher's DiagnosisYou conflated electrostatics without contact (where withdrawing the inducing object restores the initial neutral state of ) with contact transfer inside a Faraday ice pail (where touching the interior transfers all charge permanently to the outer bucket surface).
REASONING PATH
Your ACEpath teacher’s suggested approach- Gauss's Law and Hollow Conductors
In electrostatic equilibrium, all net charge resides on the exterior surface of a closed conducting cavity, leaving zero charge on inner surfaces.
When an object touches the inside of a hollow conductor, it becomes part of the interior and loses all its charge to the outer surface.
- Induction vs. Transfer
If no contact occurs, withdrawing the charged object removes the inducing field and returns the exterior potential to zero. If contact occurs, the charge transfer is permanent.
Check whether contact occurred before withdrawal; if contact happened, the charge remains on the container and the electrometer continues to read the transferred charge.
CORRECTED PATH
ACEpath Teacher's DemonstrationUpon contact, the proof plane and bucket form one continuous conductor, pushing all excess charge permanently to the outer surface.
The inner surface and proof plane neutralize each other to .
Withdrawing the uncharged proof plane carries away no charge.
The pail retains , so the electrometer reading remains .
After withdrawal,
Lock it in
When a positive charge is suspended inside an uncharged hollow conductor without touching, what charges appear on the inner and outer surfaces?
on the inner surface and on the outer surface, preserving overall neutrality.
Similar question
A charged sphere carrying is lowered into a neutral Faraday ice pail connected to an electrometer with effective capacitance . What voltage does the electrometer read before contact?
Answer
. An enclosed charge of induces on the inner surface and pushes to the outer surface: .
A Faraday ice pail setup with capacitance reads when a charged rod is lowered inside. The rod touches the inner wall, is removed, and is then touched to the outside of an identical, uncharged second pail (). What does the electrometer on the second pail read?
Answer
. Touching the inside of the first pail completely neutralizes the rod (), so transferring it to the second pail transfers no charge.
An uncharged Faraday pail () has a positively charged bead inserted, reading . While the bead remains suspended inside without touching, the outside of the pail is momentarily grounded and then ungrounded. What does the electrometer read (a) while the bead is still inside after ungrounding, and (b) after the bead is completely withdrawn without touching?
Answer
(a) ; (b) . Grounding removes the outer leaving . The inner surface retains . When the bead is removed, the remaining redistributes to the outer surface, yielding .