Resources

A crate with a mass of m=45.0 kgm = 45.0\text{ kg} rests on the flat, frictionless horizontal bed of a delivery truck. The truck is initially moving forward along a straight, level road at a constant velocity of v⃗0=+18.0 m/s  i^\vec{v}_0 = +18.0\text{ m/s}\;\hat{i}. The driver suddenly applies the brakes, causing the truck to undergo a uniform deceleration of magnitude atruck=4.20 m/s2a_{\text{truck}} = 4.20\text{ m/s}^2 until it comes to a complete stop. (a) In the inertial frame of reference of the roadway, identify the net horizontal force acting on the crate while the truck is braking. (b) Explain how Newton's first law accounts for the crate's motion relative to the road immediately after braking begins. (c) If the front wall of the truck bed is initially located d=6.50 md = 6.50\text{ m} ahead of the crate, determine the time tt elapsed from the instant braking begins until the crate collides with the front wall.

Answer and steps

Final answer

(a) The net horizontal force acting on the crate is ΣFx=0 N\Sigma F_x = 0\text{ N} because the truck bed is frictionless and no horizontal interactions exist. (b) By Newton's first law (the law of inertia), an object with zero net external force maintains its state of constant velocity; hence, the crate continues moving forward relative to the road at a constant speed of 18.0 m/s  i^18.0\text{ m/s}\;\hat{i}. (c) t=1.76 st = 1.76\text{ s}

Steps

Part (a): Net Horizontal Force on the Crate

To find the net horizontal force on the crate from the perspective of the road (an inertial reference frame), analyze the physical contact and interactions:

  • In the vertical direction, the downward gravitational force is balanced by the upward normal force exerted by the bed: ΣFy=FN−mg=0 N\Sigma F_y = F_N - mg = 0\text{ N}.
  • In the horizontal direction, the truck bed is explicitly stated to be frictionless, and air resistance is negligible. Consequently, no surface can exert a horizontal contact force on the crate.

Therefore, the net horizontal force acting on the crate is: ΣFx=0 N\Sigma F_x = 0\text{ N}


Part (b): Application of Newton's First Law

Newton's first law of motion (the law of inertia) states that an object continues in its state of rest or of uniform velocity along a straight line unless acted upon by a net external force:

If ΣF⃗=0,then a⃗=0 and v⃗=constant\text{If } \Sigma \vec{F} = 0, \quad \text{then } \vec{a} = 0 \text{ and } \vec{v} = \text{constant}

Because ΣFx=0 N\Sigma F_x = 0\text{ N} horizontally, the crate has zero horizontal acceleration relative to the road. Although the truck slows down because of the friction between its tires and the roadway, no horizontal force acts on the crate to decelerate it. As a result, the crate continues to travel forward relative to the ground at its initial velocity: v⃗crate=+18.0 m/s  i^\vec{v}_{\text{crate}} = +18.0\text{ m/s}\;\hat{i}

Common Pitfall: To an observer inside the truck cab, the crate appears to be thrown forward by a "force." This perceived force is merely a fictitious (inertial) force arising because the truck is a non-inertial, accelerating reference frame. In reality, the crate simply maintains its state of motion while the truck slows down beneath it.


Part (c): Time Elapsed Until Collision

We can solve for the time tt by analyzing the relative motion between the crate and the truck.

  1. Relative Acceleration: Define the forward direction as positive (i^\hat{i}).

    • Acceleration of the crate relative to the ground: acrate=0 m/s2a_{\text{crate}} = 0\text{ m/s}^2
    • Acceleration of the truck relative to the ground: atruck=−4.20 m/s2a_{\text{truck}} = -4.20\text{ m/s}^2

    The acceleration of the crate relative to the truck bed is: arel=acrate−atruck=0−(−4.20 m/s2)=+4.20 m/s2a_{\text{rel}} = a_{\text{crate}} - a_{\text{truck}} = 0 - (-4.20\text{ m/s}^2) = +4.20\text{ m/s}^2

  2. Kinematic Equation for Relative Displacement: Initially, both the truck and the crate travel at 18.0 m/s18.0\text{ m/s}, so their initial relative velocity is zero: vrel,0=0 m/sv_{\text{rel}, 0} = 0\text{ m/s}

    The crate must cover a relative distance of d=6.50 md = 6.50\text{ m} to hit the front wall: d=vrel,0t+12arelt2d = v_{\text{rel}, 0} t + \frac{1}{2} a_{\text{rel}} t^2

    Substituting the known values: 6.50=0+12(4.20)t26.50 = 0 + \frac{1}{2}(4.20) t^2 6.50=2.10t26.50 = 2.10 t^2 t2=6.502.10≈3.095t^2 = \frac{6.50}{2.10} \approx 3.095 t=3.095≈1.76 st = \sqrt{3.095} \approx 1.76\text{ s}

(Note: The truck takes tstop=18.04.20≈4.29 st_{\text{stop}} = \frac{18.0}{4.20} \approx 4.29\text{ s} to come to a complete halt, confirming that the collision takes place well before the truck stops.)

Typical errors

OverviewACEpath Teacher's Diagnosis

01 The student invents a fictitious forward inertial force in the roadway inertial frame by multiplying the crate's mass by the truck's deceleration.

Sample Student Work

Reviewed by ACEpath Teacher
Step-by-Step Review
Walk Through It with Your Teacher
Partially correct
  1. Step 1

    Fnet=m⋅atruck  ⟹  Fnet=45.0⋅4.20=189 N forwardF_{\text{net}} = m \cdot a_{\text{truck}} \implies F_{\text{net}} = 45.0 \cdot 4.20 = 189\text{ N forward}

    Correct

    ΣFx=0 N\Sigma F_x = 0\text{ N}

    In an inertial frame of reference such as the roadway, real forces require a physical interaction. Because the truck bed is frictionless and air resistance is neglected, no horizontal contact force acts on the crate.

  2. Step 2

    By Newton's first law, the crate wants to keep moving forward, so it pushes forward on the bed with a force of 189 N189\text{ N}.

    Correct

    By Newton's first law, since ΣFx=0 N\Sigma F_x = 0\text{ N}, the crate maintains its constant horizontal velocity of +18.0 m/s  i^+18.0\text{ m/s}\;\hat{i} relative to the road with zero horizontal acceleration.

    Inertia is a property of matter to resist changes in velocity, not a force that an object exerts to keep moving. With zero net horizontal force, the crate simply continues moving forward at its initial speed while the truck slows down beneath it.

  3. Step 3

    d=12arelt2  ⟹  6.50=0.5⋅4.20⋅t2  ⟹  t=6.502.10≈1.76 sd = \frac{1}{2} a_{\text{rel}} t^2 \implies 6.50 = 0.5 \cdot 4.20 \cdot t^2 \implies t = \sqrt{\frac{6.50}{2.10}} \approx 1.76\text{ s}

WHAT YOU DID WELL
Compliments from Your Teacher

You correctly identified that the crate continues forward relative to the braking truck.

You accurately calculated the relative acceleration between the crate and the truck bed.

You correctly applied kinematic equations to determine the elapsed collision time of 1.76 s1.76\text{ s}.

THE ERROR
Where Your ACEpath Teacher Spotted the Mistake
Fictitious Force Treated as Real Force

None. Your kinematic calculation in part (c) was completely sound.

WHY IT HAPPENED
ACEpath Teacher's Diagnosis

You confused inertia with an active applied force (m⋅am \cdot a). In an inertial reference frame, an object maintains its velocity without any forward force; ma⃗m \vec{a} represents the mass times acceleration, not an extra force exerted by the object.

REASONING PATH
Your ACEpath teacher’s suggested approach
Identify Physical Interactions
  • In an inertial frame, every real force must correspond to a physical interaction (such as gravity, normal force, tension, or friction).

  • Ask yourself what physical object is pushing or pulling the crate horizontally; if the surface is frictionless and air is negligible, ΣFx=0\Sigma F_x = 0.

Newton's First Law Means Zero Net Force
  • Constant velocity requires ΣF⃗=0\Sigma \vec{F} = 0, not a forward force to maintain motion.

  • State that the object simply keeps moving at v⃗=constant\vec{v} = \text{constant} because no net force acts to change its state of motion.

CORRECTED PATH
ACEpath Teacher's Demonstration
  1. Draw a free-body diagram for the crate in the roadway frame: downward gravity mgmg and upward normal force FNF_N.

  2. Observe that the bed is frictionless, meaning no surface can exert a horizontal contact force: ΣFx=0 N\Sigma F_x = 0\text{ N}.

  3. Apply Newton's first law: with ΣFx=0 N\Sigma F_x = 0\text{ N}, the crate does not accelerate relative to the ground and continues forward at +18.0 m/s  i^+18.0\text{ m/s}\;\hat{i}.

Final answer

(a) ΣFx=0 N\Sigma F_x = 0\text{ N}; (b) By Newton's first law, since ΣFx=0 N\Sigma F_x = 0\text{ N}, the crate continues moving forward at a constant velocity of +18.0 m/s  i^+18.0\text{ m/s}\;\hat{i}; (c) t=1.76 st = 1.76\text{ s}

NEXT STEPS
Final Takeaways from Your Teacher
  • Practice drawing free-body diagrams strictly in inertial reference frames by identifying specific agent-object pairs for each force.

  • Review the distinction between the resultant vector ma⃗m\vec{a} and the physical forces that sum to produce ΣF⃗\Sigma \vec{F}.

OverviewACEpath Teacher's Diagnosis

02 The student misinterprets the relative acceleration as that of an object slowing down rather than speeding up toward the front wall, using a deceleration formula with initial velocity 18.0 m/s.

Sample Student Work

Reviewed by ACEpath Teacher
Step-by-Step Review
Walk Through It with Your Teacher
Partially correct
  1. Step 1

    Fnet=0 NF_{\text{net}} = 0\text{ N}

  2. Step 2

    According to Newton's first law, because net force is zero, the crate continues at a constant forward velocity of 18.0 m/s18.0\text{ m/s}.

  3. Step 3

    d=v0∗t−12∗a∗t2  ⟹  6.50=18.0∗t−2.10∗t2d = v_0 * t - \frac{1}{2} * a * t^2 \implies 6.50 = 18.0 * t - 2.10 * t^2

    Correct

    d=vrel,0t+12arelt2  ⟹  6.50=0+12(4.20)t2d = v_{\text{rel}, 0} t + \frac{1}{2} a_{\text{rel}} t^2 \implies 6.50 = 0 + \frac{1}{2}(4.20) t^2

    You used the truck's ground speed of 18.0 m/s18.0\text{ m/s} as the initial velocity for the relative separation d=6.50 md = 6.50\text{ m}. Because both the crate and the truck initially move forward at 18.0 m/s18.0\text{ m/s}, their initial relative velocity is vrel,0=0 m/sv_{\text{rel}, 0} = 0\text{ m/s}. In the truck frame, the crate accelerates toward the front wall at arel=4.20 m/s2a_{\text{rel}} = 4.20\text{ m/s}^2 from rest.

  4. Step 4

    2.10∗t2−18.0∗t+6.50=0  ⟹  t=18.0−324−54.64.20  ⟹  t≈0.38 s2.10 * t^2 - 18.0 * t + 6.50 = 0 \implies t = \frac{18.0 - \sqrt{324 - 54.6}}{4.20} \implies t \approx 0.38\text{ s}

    Correct

    t=6.502.10≈1.76 st = \sqrt{\frac{6.50}{2.10}} \approx 1.76\text{ s}

    Your quadratic formula calculation followed correctly from your setup equation, but the resulting time was affected by the incorrect initial velocity term.

WHAT YOU DID WELL
Compliments from Your Teacher

You correctly identified that the frictionless surface exerts zero net horizontal force on the crate.

You clearly applied Newton's first law to explain why the crate continues moving forward at constant velocity relative to the road.

THE ERROR
Where Your ACEpath Teacher Spotted the Mistake
Reference Frame Kinematics Confusion

You substituted the ground speed of the truck (18.0 m/s18.0\text{ m/s}) into the displacement equation for the gap between the crate and the front wall.

WHY IT HAPPENED
ACEpath Teacher's Diagnosis

Confusing ground-frame kinematic variables with relative-frame kinematic variables when analyzing approaching bodies.

REASONING PATH
Your ACEpath teacher’s suggested approach
Define the Reference Frame Consistently
  • Relative displacement Δxrel\Delta x_{\text{rel}} requires relative initial velocity vrel,0=v1,0−v2,0v_{\text{rel}, 0} = v_{1,0} - v_{2,0} and relative acceleration arel=a1−a2a_{\text{rel}} = a_1 - a_2.

  • Always compute vrel,0v_{\text{rel}, 0} and arela_{\text{rel}} explicitly before substituting values into kinematic formulas.

CORRECTED PATH
ACEpath Teacher's Demonstration
  1. Determine the initial relative velocity: vrel,0=vcrate,0−vtruck,0=18.0 m/s−18.0 m/s=0 m/sv_{\text{rel}, 0} = v_{\text{crate}, 0} - v_{\text{truck}, 0} = 18.0\text{ m/s} - 18.0\text{ m/s} = 0\text{ m/s}.

  2. Determine the relative acceleration: taking forward as positive, acrate=0 m/s2a_{\text{crate}} = 0\text{ m/s}^2 and atruck=−4.20 m/s2a_{\text{truck}} = -4.20\text{ m/s}^2, so arel=acrate−atruck=0−(−4.20)=+4.20 m/s2a_{\text{rel}} = a_{\text{crate}} - a_{\text{truck}} = 0 - (-4.20) = +4.20\text{ m/s}^2.

  3. Set up the relative kinematics equation for distance d=6.50 md = 6.50\text{ m}: d=vrel,0t+12arelt2  ⟹  6.50=0+2.10t2d = v_{\text{rel}, 0}t + \frac{1}{2}a_{\text{rel}}t^2 \implies 6.50 = 0 + 2.10t^2.

  4. Solve for tt: t2=6.502.10≈3.095  ⟹  t≈1.76 st^2 = \frac{6.50}{2.10} \approx 3.095 \implies t \approx 1.76\text{ s}.

Final answer

t≈1.76 st \approx 1.76\text{ s}

NEXT STEPS
Final Takeaways from Your Teacher
  • Practice separating relative kinematic quantities (xrel,vrel,arelx_{\text{rel}}, v_{\text{rel}}, a_{\text{rel}}) from ground-frame quantities.

  • When solving catch-up or collision problems, verify whether solving in the relative frame or writing separate ground-frame position functions is easier.

OverviewACEpath Teacher's Diagnosis

03 The student omits the factor of 1/2 in the kinematic equation for displacement from rest, using d = a * t² instead of d = (1/2) * a * t².

Sample Student Work

Reviewed by ACEpath Teacher
Step-by-Step Review
Walk Through It with Your Teacher
Partially correct
  1. Step 1

    Fnet=0 NF_{\text{net}} = 0\text{ N}

  2. Step 2

    According to Newton's first law, an object with no net force maintains a constant velocity, so the crate moves forward at 18.0 m/s18.0\text{ m/s} relative to the road.

  3. Step 3

    d=arel∗t2  ⟹  6.50=4.20∗t2d = a_{\text{rel}} * t^2 \implies 6.50 = 4.20 * t^2

    Correct

    d=vrel,0t+12arelt2=12(4.20)t2d = v_{\text{rel}, 0} t + \frac{1}{2} a_{\text{rel}} t^2 = \frac{1}{2}(4.20)t^2

    You correctly identified the relative acceleration as 4.20 m/s24.20\text{ m/s}^2 and the initial relative velocity as zero, but you omitted the factor of 12\frac{1}{2} in the constant-acceleration displacement formula.

  4. Step 4

    t2=6.50/4.20≈1.55  ⟹  t≈1.24 st^2 = 6.50 / 4.20 \approx 1.55 \implies t \approx 1.24\text{ s}

    Correct

    t=2darel=2(6.50)4.20≈1.76 st = \sqrt{\frac{2d}{a_{\text{rel}}}} = \sqrt{\frac{2(6.50)}{4.20}} \approx 1.76\text{ s}

    Your algebra and square-root evaluation were carried out properly, but the numerical answer is incorrect due to the missing factor of 12\frac{1}{2} from the previous step.

WHAT YOU DID WELL
Compliments from Your Teacher

You correctly identified that the net horizontal force on the crate is zero.

You clearly explained how Newton's first law keeps the crate moving at constant speed relative to the road.

You correctly determined that the relative acceleration between the truck and crate has magnitude 4.20 m/s24.20\text{ m/s}^2.

THE ERROR
Where Your ACEpath Teacher Spotted the Mistake
Omitted Factor of 1/2 in Kinematics Equation

You wrote d=at2d = a t^2 instead of d=12at2d = \frac{1}{2} a t^2 when calculating displacement under constant acceleration from rest.

WHY IT HAPPENED
ACEpath Teacher's Diagnosis

Conflating dimensional proportionality (d∝at2d \propto a t^2) with the exact kinematic identity derived from calculus or average velocity (d=vavgt=0+at2t=12at2d = v_{\text{avg}} t = \frac{0 + at}{2} t = \frac{1}{2} a t^2).

REASONING PATH
Your ACEpath teacher’s suggested approach
Average Velocity Check
  • For motion with constant acceleration starting from rest (v0=0v_0 = 0), the average velocity over time interval tt is vavg=v0+v2=12atv_{\text{avg}} = \frac{v_0 + v}{2} = \frac{1}{2} a t.

  • Always verify that displacement satisfies Δx=vavgt=12at2\Delta x = v_{\text{avg}} t = \frac{1}{2} a t^2 rather than at2a t^2.

CORRECTED PATH
ACEpath Teacher's Demonstration
  1. Write the complete kinematic equation for displacement from rest: d=12arelt2d = \frac{1}{2} a_{\text{rel}} t^2.

  2. Substitute the known values: 6.50=12(4.20)t2=2.10t26.50 = \frac{1}{2}(4.20) t^2 = 2.10 t^2.

  3. Solve for t2t^2: t2=6.502.10≈3.095t^2 = \frac{6.50}{2.10} \approx 3.095.

  4. Take the square root: t=3.095≈1.76 st = \sqrt{3.095} \approx 1.76\text{ s}.

Final answer

(a) ΣFx=0 N\Sigma F_x = 0\text{ N}; (b) By Newton's first law, the crate maintains its constant velocity of +18.0 m/s  i^+18.0\text{ m/s}\;\hat{i}; (c) t≈1.76 st \approx 1.76\text{ s}

NEXT STEPS
Final Takeaways from Your Teacher
  • Double-check standard kinematic formulas before substituting values, especially verifying the 12\frac{1}{2} factor on quadratic time terms.

  • Perform a quick sense check using average velocity: with vf=at=4.20×1.76≈7.39 m/sv_f = at = 4.20 \times 1.76 \approx 7.39\text{ m/s}, the average relative speed is ≈3.70 m/s\approx 3.70\text{ m/s}, giving 3.70×1.76≈6.51 m3.70 \times 1.76 \approx 6.51\text{ m}.

Lock it in

Similar question

01

A 2.0 kg2.0\text{ kg} textbook rests on a smooth, frictionless horizontal cart moving rightward at 4.0 m/s4.0\text{ m/s} relative to the ground. The cart suddenly decelerates at 3.0 m/s23.0\text{ m/s}^2. What is the horizontal acceleration of the textbook relative to the ground while the cart is decelerating?

Answer

0 m/s20\text{ m/s}^2. Because the contact surface is frictionless, there is no horizontal force acting on the book in the ground frame (ΣFx=0\Sigma F_x = 0), so by Newton's first law its acceleration relative to the ground is a=0 m/s2a = 0\text{ m/s}^2.

02

A frictionless cart carries a 5.0 kg5.0\text{ kg} block. The cart and block are initially traveling at 12.0 m/s12.0\text{ m/s} along a level track when the cart hits a braking zone and decelerates uniformly at 2.5 m/s22.5\text{ m/s}^2. If the block is initially 1.25 m1.25\text{ m} away from the front lip of the cart, how long does it take for the block to reach the lip?

Answer

t=1.0 st = 1.0\text{ s}. Relative to the ground, ablock=0 m/s2a_{\text{block}} = 0\text{ m/s}^2 and acart=−2.5 m/s2a_{\text{cart}} = -2.5\text{ m/s}^2. Thus, the relative acceleration is arel=2.5 m/s2a_{\text{rel}} = 2.5\text{ m/s}^2. Using d=12arelt2d = \frac{1}{2} a_{\text{rel}} t^2, we have 1.25=12(2.5)t2  ⟹  t2=1.0  ⟹  t=1.0 s1.25 = \frac{1}{2}(2.5) t^2 \implies t^2 = 1.0 \implies t = 1.0\text{ s}.

03

A 10.0 kg10.0\text{ kg} box sits on a flat truck bed with coefficient of kinetic friction μk=0.20\mu_k = 0.20. The truck moves forward at 20.0 m/s20.0\text{ m/s} and brakes with a deceleration of magnitude 5.0 m/s25.0\text{ m/s}^2. In the inertial reference frame of the road, find the magnitude and direction of the net horizontal force acting on the box while it slides forward along the truck bed. Take g=9.80 m/s2g = 9.80\text{ m/s}^2.

Answer

19.6 N19.6\text{ N} backward. The only horizontal force on the box is kinetic friction between the box and the bed. Since the box slides forward relative to the truck bed, kinetic friction opposes this relative motion, acting backward on the box: fk=μkFN=μkmg=(0.20)(10.0 kg)(9.80 m/s2)=19.6 Nf_k = \mu_k F_N = \mu_k mg = (0.20)(10.0\text{ kg})(9.80\text{ m/s}^2) = 19.6\text{ N}. Thus, ΣFx=19.6 N\Sigma F_x = 19.6\text{ N} directed backward.

Loading workspace…