Resources

In an undergraduate physics laboratory experiment, students use a Kundt's tube apparatus coupled with an acoustic speaker and fine lycopodium powder to analyze standing wave patterns. A signal generator excites the air inside a horizontal glass tube closed at both ends of length L=0.900 mL = 0.900\text{ m} at resonant frequencies. At resonance, the lycopodium powder forms distinct, periodic quiescent heaps separated by violently agitated zones. (a) Identify whether the standing acoustic pattern inside the tube is formed by transverse or longitudinal waves, and identify what the quiescent powder heaps represent (displacement nodes or displacement antinodes). (b) If the air temperature is 20.0∘C20.0^\circ\text{C} (speed of sound v=343 m/sv = 343\text{ m/s}) and the powder settles into exactly 66 localized heaps along the length of the tube (corresponding to the fundamental mode having 11 heap per half-wavelength, such that the tube contains 66 half-wavelengths), calculate the driving frequency ff of the acoustic generator. (c) A student shines a polarized laser beam perpendicularly across the tube to illuminate the powder. State whether the laser light wave is transverse or longitudinal, and explain how the powder motion directly reveals the longitudinal oscillation direction of the air column.

Answer and steps

Final answer

(a) Longitudinal standing wave; the quiet powder heaps settle at displacement nodes (where air particle displacement and velocity are zero); (b) f=1.14×103 Hzf = 1.14\times 10^3\text{ Hz}; (c) The laser light is a transverse electromagnetic wave; the powder striations and motion align along the horizontal longitudinal axis of the tube, visually confirming that air parcel oscillations occur parallel to the tube axis rather than vertically across it.

Steps

Part (a): Nature of the Acoustic Wave and Meaning of the Heaps

  1. Wave Classification in Air:
    Sound waves propagating through air are longitudinal waves. The medium's fluid parcels oscillate back and forth parallel to the direction of wave propagation, creating alternating regions of compression and rarefaction. When trapped in a cavity, the interference of counter-propagating longitudinal sound waves establishes a longitudinal standing wave.
  2. Interpreting the Powder Heaps:

    • At displacement antinodes, the oscillating air parcels reach their maximum velocity and displacement amplitude, producing strong localized airflow that violently disperses the fine lycopodium powder.
    • At displacement nodes, the acoustic particle displacement and velocity are identically zero at all times. Because the air remains stationary at these points, the powder can settle undisturbed.
      Therefore, the quiescent powder heaps form directly at the displacement nodes (which also correspond to pressure antinodes).

Part (b): Calculating the Driving Frequency

  1. Relate Cavity Length to Wavelength:
    A standing wave in a tube closed at both ends forms displacement nodes at each rigid boundary. The condition for resonance is that the total tube length LL equals an integer number nn of half-wavelengths: L=nλ2L = n\frac{\lambda}{2}

    Given n=6n = 6 half-wavelengths and L=0.900 mL = 0.900\text{ m}: λ=2Ln=2(0.900 m)6=0.300 m\lambda = \frac{2L}{n} = \frac{2(0.900\text{ m})}{6} = 0.300\text{ m}

  2. Calculate the Resonant Frequency:
    Using the wave speed equation v=fλv = f\lambda: f=vλ=343 m/s0.300 m=1143.33… Hz≈1.14×103 Hzf = \frac{v}{\lambda} = \frac{343\text{ m/s}}{0.300\text{ m}} = 1143.33\dots\text{ Hz} \approx 1.14\times 10^3\text{ Hz}

Part (c): Transverse Nature of Laser Light vs. Longitudinal Particle Motion

  1. Classification of the Laser Light:
    Laser light is an electromagnetic wave, which is fundamentally transverse. The oscillating electric and magnetic fields are mutually perpendicular to one another and both are strictly perpendicular to the direction of beam propagation.
  2. Visual Evidence of Longitudinal Air Oscillation:
    When illuminated, the fine lycopodium particles are seen vibrating and forming delicate ribbed striations along the horizontal axis of the glass tube. Because this back-and-forth motion occurs strictly parallel to the tube axis (the direction of acoustic propagation) rather than vertically across it, it provides direct visual proof that the acoustic wave is longitudinal.

Typical errors

OverviewACEpath Teacher's Diagnosis

01 The student confuses displacement nodes with displacement antinodes, believing quiescent heaps form at antinodes where agitation is assumed to gather powder.

Sample Student Work

Reviewed by ACEpath Teacher
Step-by-Step Review
Walk Through It with Your Teacher
Partially correct
  1. Step 1

    Sound waves are longitudinal. ⟹\Longrightarrow The quiet powder heaps represent displacement antinodes.

    Correct

    Sound waves are longitudinal waves; the quiescent powder heaps represent displacement nodes.

    While you correctly identified sound as a longitudinal wave, the quiet powder heaps form where the air is calm and undisturbed. In a standing wave, points of zero particle displacement and zero velocity are displacement nodes, whereas displacement antinodes experience maximal air motion that blows the powder away.

  2. Step 2

    L=6(λ2)=3λ⟹λ=0.900 m3=0.300 m⟹f=vλ=343 m/s0.300 m=1143 HzL = 6\left(\frac{\lambda}{2}\right) = 3\lambda \Longrightarrow \lambda = \frac{0.900\text{ m}}{3} = 0.300\text{ m} \Longrightarrow f = \frac{v}{\lambda} = \frac{343\text{ m/s}}{0.300\text{ m}} = 1143\text{ Hz}

  3. Step 3

    Laser light is a transverse wave. ⟹\Longrightarrow Powder particles oscillate horizontally back and forth parallel to the length of the tube, showing longitudinal air vibration.

WHAT YOU DID WELL
Compliments from Your Teacher

You correctly classified sound as a longitudinal wave and laser light as a transverse electromagnetic wave.

You set up the harmonic relation L=6(λ/2)L = 6(\lambda/2) and solved for the resonant frequency accurately.

You clearly explained that particles oscillating parallel to the propagation axis provide visual proof of longitudinal wave motion.

THE ERROR
Where Your ACEpath Teacher Spotted the Mistake
Node vs. Antinode Misidentification

You designated the quiescent powder heaps as displacement antinodes rather than displacement nodes.

WHY IT HAPPENED
ACEpath Teacher's Diagnosis

Confusing the physical condition of acoustic displacement with powder accumulation, forgetting that light powder can only rest at locations where air particle velocity and displacement remain identically zero (nodes).

REASONING PATH
Your ACEpath teacher’s suggested approach
Acoustic Displacement Nodes vs. Antinodes
  • At a displacement node, particle velocity is zero (v=0v = 0), so loose powder remains undisturbed. At a displacement antinode, particle velocity reaches its maximum (v=vmaxv = v_\text{max}), blowing powder away.

  • Associate quiet, stationary heaps with displacement nodes and agitated or cleared zones with displacement antinodes.

CORRECTED PATH
ACEpath Teacher's Demonstration
  1. Identify the physical state of the air parcels at the location of the quiet powder heaps: the air must be stationary so the powder can settle.

  2. Recall that points of zero oscillation amplitude and zero velocity in a standing wave are defined as displacement nodes.

  3. Conclude that the quiescent heaps represent displacement nodes, while the violently agitated zones correspond to displacement antinodes.

Final answer

(a) Longitudinal wave; displacement nodes; (b) f=1.14×103 Hzf = 1.14\times 10^3\text{ Hz}; (c) Transverse wave; powder particles oscillate parallel to the tube axis, showing longitudinal motion.

NEXT STEPS
Final Takeaways from Your Teacher
  • Review the distinction between displacement nodes/antinodes and pressure nodes/antinodes in acoustic standing waves.

  • Practice identifying boundary conditions and physical indicators (such as dust patterns or flame heights in a Rubens' tube) for acoustic standing wave modes.

OverviewACEpath Teacher's Diagnosis

02 The student equates the number of heaps directly to the number of full wavelengths instead of half-wavelengths, setting L = 6λ.

Sample Student Work

Reviewed by ACEpath Teacher
Step-by-Step Review
Walk Through It with Your Teacher
Partially correct
  1. Step 1

    Sound waves are longitudinal. The quiescent heaps represent displacement nodes.

  2. Step 2

    L=6λ  ⟹  λ=0.900/6=0.150 mL = 6\lambda \implies \lambda = 0.900 / 6 = 0.150\text{ m}

    Correct

    L=6(λ2)=3λ  ⟹  λ=0.900 m3=0.300 mL = 6\left(\frac{\lambda}{2}\right) = 3\lambda \implies \lambda = \frac{0.900\text{ m}}{3} = 0.300\text{ m}

    In a standing wave, the distance between consecutive displacement nodes (or quiescent heaps) is one half-wavelength (λ2\frac{\lambda}{2}), not a full wavelength. Therefore, 66 heaps correspond to L=6(λ2)=3λL = 6\left(\frac{\lambda}{2}\right) = 3\lambda, giving λ=0.300 m\lambda = 0.300\text{ m}.

  3. Step 3

    f=343/0.150=2287 Hzf = 343 / 0.150 = 2287\text{ Hz}

    Correct

    f=vλ=343 m/s0.300 m≈1.14×103 Hzf = \frac{v}{\lambda} = \frac{343\text{ m/s}}{0.300\text{ m}} \approx 1.14\times 10^3\text{ Hz}

    You applied the wave speed formula f=vλf = \frac{v}{\lambda} correctly, but the resulting numerical value was doubled due to the halved wavelength in the previous step.

  4. Step 4

    Laser light is a transverse wave. The powder particles shake back and forth along the axis of the tube, showing the displacement is parallel to wave propagation.

WHAT YOU DID WELL
Compliments from Your Teacher

You correctly classified the wave types for both acoustic sound waves and laser light.

You identified that the quiescent heaps settle at displacement nodes.

You clearly explained how horizontal particle oscillation along the tube axis demonstrates longitudinal wave motion.

You correctly used the wave speed relationship f=vλf = \frac{v}{\lambda}.

THE ERROR
Where Your ACEpath Teacher Spotted the Mistake
Node-to-node spacing conflated with full wavelength

no

WHY IT HAPPENED
ACEpath Teacher's Diagnosis

You equated each standing wave node interval directly to a full wavelength λ\lambda rather than a half-wavelength λ2\frac{\lambda}{2}. In any standing wave, the distance between adjacent nodes is always λ2\frac{\lambda}{2}.

REASONING PATH
Your ACEpath teacher’s suggested approach
Standing Wave Node Spacing
  • The spatial separation between adjacent nodes (or adjacent antinodes) is always λ2\frac{\lambda}{2}, so nn segments equal n(λ2)n\left(\frac{\lambda}{2}\right).

  • Always count the number of half-wavelength loops or node-to-node intervals, and write L=nλ2L = n\frac{\lambda}{2} before solving for λ\lambda.

CORRECTED PATH
ACEpath Teacher's Demonstration
  1. Recognize that each of the 66 quiescent powder heaps marks a displacement node, meaning the tube spans 66 half-wavelengths: L=6(λ2)=3λL = 6\left(\frac{\lambda}{2}\right) = 3\lambda.

  2. Solve for the wavelength: λ=L3=0.900 m3=0.300 m\lambda = \frac{L}{3} = \frac{0.900\text{ m}}{3} = 0.300\text{ m}.

  3. Calculate the resonant frequency using v=343 m/sv = 343\text{ m/s}: f=vλ=343 m/s0.300 m≈1143 Hz=1.14×103 Hzf = \frac{v}{\lambda} = \frac{343\text{ m/s}}{0.300\text{ m}} \approx 1143\text{ Hz} = 1.14\times 10^3\text{ Hz}.

Final answer

f=1.14×103 Hzf = 1.14\times 10^3\text{ Hz} (or 1143 Hz1143\text{ Hz})

NEXT STEPS
Final Takeaways from Your Teacher
  • Review the spatial profile of standing waves to reinforce why node-to-node spacing is λ2\frac{\lambda}{2} rather than λ\lambda.

  • Practice drawing Kundt's tube standing wave envelopes with node and antinode markers before writing equations.

OverviewACEpath Teacher's Diagnosis

03 The student misinterprets light as a longitudinal wave because it travels along a straight beam path.

Sample Student Work

Reviewed by ACEpath Teacher
Step-by-Step Review
Walk Through It with Your Teacher
Partially correct
  1. Step 1

    Sound waves are longitudinal waves. The quiescent heaps are displacement nodes.

  2. Step 2

    L=6∗(λ2)=3λ  ⟹  λ=0.9003=0.300 m  ⟹  f=3430.300=1143 HzL = 6 * (\frac{\lambda}{2}) = 3\lambda \implies \lambda = \frac{0.900}{3} = 0.300\text{ m} \implies f = \frac{343}{0.300} = 1143\text{ Hz}

  3. Step 3

    Laser light is a longitudinal wave.

    Correct

    Laser light is a transverse electromagnetic wave.

    Light is an electromagnetic wave where the oscillating electric and magnetic field vectors are perpendicular to the beam's propagation direction, making it transverse rather than longitudinal.

  4. Step 4

    Powder motion is back and forth parallel to the tube axis, proving the air oscillates along the propagation direction.

WHAT YOU DID WELL
Compliments from Your Teacher

You correctly identified sound waves in air as longitudinal waves.

You properly connected zero particle motion at displacement nodes to the accumulation of quiescent powder heaps.

You accurately derived the wavelength and calculated the acoustic frequency using the wave speed equation.

You provided a clear physical description of how particle oscillation direction demonstrates longitudinal wave behavior.

THE ERROR
Where Your ACEpath Teacher Spotted the Mistake
Transverse vs. Longitudinal Wave Classification

You classified the laser beam as longitudinal despite noting that it is polarized light.

WHY IT HAPPENED
ACEpath Teacher's Diagnosis

You may have conflated the straight-line beam path of laser propagation with longitudinal oscillation, or overlooked that all electromagnetic radiation consists of oscillating fields transverse to the direction of travel.

REASONING PATH
Your ACEpath teacher’s suggested approach
Oscillation vs. Propagation Direction
  • A wave is transverse if its disturbances (or field oscillations) are perpendicular to the propagation velocity, and longitudinal if the oscillations are parallel to the propagation velocity.

  • Always determine wave type by the direction of the underlying oscillation relative to propagation, not by the shape of the beam or beam path.

Electromagnetic Wave Nature & Polarization
  • All electromagnetic waves (including laser light) are transverse waves with oscillating E⃗\vec{E} and B⃗\vec{B} fields perpendicular to each other and to the propagation vector k⃗\vec{k}.

  • Whenever a problem mentions light, lasers, or polarization, immediately recognize it as a transverse wave because longitudinal waves cannot be polarized.

CORRECTED PATH
ACEpath Teacher's Demonstration
  1. Identify the physical nature of laser radiation: it is an electromagnetic wave consisting of oscillating electric (E⃗\vec{E}) and magnetic (B⃗\vec{B}) fields.

  2. Recall that in electromagnetic waves in free space or isotropic media, E⃗⊥k⃗\vec{E} \perp \vec{k} and B⃗⊥k⃗\vec{B} \perp \vec{k}, where k⃗\vec{k} is the propagation direction.

  3. Conclude that laser light is fundamentally a transverse wave, which is also confirmed by its ability to be polarized.

Final answer

(a) Longitudinal standing wave; displacement nodes; (b) f=1143 Hzf = 1143\text{ Hz} (1.14×103 Hz1.14\times 10^3\text{ Hz}); (c) Transverse wave; powder particles oscillate parallel to the tube axis, directly matching the acoustic propagation direction.

NEXT STEPS
Final Takeaways from Your Teacher
  • Review the defining distinction between transverse waves (oscillations perpendicular to propagation) and longitudinal waves (oscillations parallel to propagation).

  • Remember the key diagnostic property of polarization: only transverse waves can exhibit polarization.

  • Practice classifying various mechanical and electromagnetic waves (sound in fluids, seismic P and S waves, surface water waves, radio waves, light).

Lock it in

Similar question

01

A horizontal organ pipe of length L=1.20 mL = 1.20\text{ m} is closed at one end and open at the other. When driven at its third harmonic (which corresponds to n=3n = 3 in fn=nv4Lf_n = \frac{nv}{4L}), how many displacement nodes form inside the tube (including the closed end), and does a displacement node or antinode form at the open end? (Take speed of sound v=340 m/sv = 340\text{ m/s}.)

Answer

22 displacement nodes form (one at the closed boundary x=0x = 0 and another at x=23L=0.80 mx = \frac{2}{3}L = 0.80\text{ m}). A displacement antinode forms at the open end (x=Lx = L). Key steps: for a closed-open pipe, the displacement mode shape is y(x)=Asin⁡(3πx2L)y(x) = A\sin\left(\frac{3\pi x}{2L}\right). Zeros occur where 3πx2L=0,π  ⟹  x=0,23L\frac{3\pi x}{2L} = 0, \pi \implies x = 0, \frac{2}{3}L.

02

In a Rubens' tube experiment, a metal tube with small gas perforations along its top is driven by a speaker to create a standing sound wave. Methane gas escaping through the holes is lit, creating flames of varying height. Do the tallest flames appear at acoustic displacement nodes or acoustic displacement antinodes? Explain briefly.

Answer

Tallest flames appear at displacement nodes (which are pressure antinodes). Key steps: fuel gas is forced out most strongly where acoustic pressure variations and root-mean-square pressure are maximal. Maximum pressure fluctuations occur at displacement nodes, yielding the highest flame heights there.

03

An acoustic standing wave in air (v=344 m/sv = 344\text{ m/s}) is set up between two rigid walls separated by D=0.860 mD = 0.860\text{ m}. A tiny suspended dust particle is observed oscillating back and forth along the axis with an amplitude of 0.50 mm0.50\text{ mm} at a position halfway between a displacement node and the adjacent displacement antinode. If the tube operates in its second harmonic (n=2n = 2), determine the distance between adjacent powder heaps that settle on the floor of the tube and find the maximum displacement amplitude of air parcels at an antinode.

Answer

Distance between adjacent heaps is 0.430 m0.430\text{ m}; maximum displacement amplitude at an antinode is Amax≈0.71 mmA_\text{max} \approx 0.71\text{ mm}. Key steps: (1) For n=2n=2, D=2(λ/2)=λ=0.860 mD = 2(\lambda/2) = \lambda = 0.860\text{ m}. Heaps form at displacement nodes, separated by λ/2=0.430 m\lambda/2 = 0.430\text{ m}. (2) The standing wave displacement profile is s(x)=Amaxsin⁡(kx)s(x) = A_\text{max}\sin(kx). Halfway between a node (x=0x=0) and an antinode (x=λ/4x=\lambda/4) is x=λ/8x = \lambda/8, where kx=2πλλ8=π4kx = \frac{2\pi}{\lambda}\frac{\lambda}{8} = \frac{\pi}{4}. Thus s(λ/8)=Amaxsin⁡(π/4)=Amax2=0.50 mm  ⟹  Amax=0.502≈0.71 mms(\lambda/8) = A_\text{max}\sin(\pi/4) = \frac{A_\text{max}}{\sqrt{2}} = 0.50\text{ mm} \implies A_\text{max} = 0.50\sqrt{2} \approx 0.71\text{ mm}.

Loading workspace…